Populating the user group instead of the group ID in MFA

Hello all,
I am trying to Populate the user group instead of the group ID in MFA. I want to use this to create authorization permissions, after authentication. I am running into the problem of not getting any info after authentication in the attribute dump. Are
there settings that I can change in order to Populate the attribute dump? are there settings that I can change to get all of the groups that each user is in?
Thanks,
Levi Williams
IT professonial
Intern

Hi Levi Williams,
Thanks for posting here!
Refer to the solution in this thread link:
https://social.msdn.microsoft.com/Forums/en-US/df060757-8190-4083-a162-0876cd4b8d15/group-based-radius-return-attributes?forum=windowsazureactiveauthentication
Additional reference:
http://www.rdsgurus.com/uncategorized/step-by-step-using-windows-server-2012-r2-rd-gateway-with-azure-multifactor-authentication/
Hope this helps!
Regards,
Sadiqh

Similar Messages

The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppres

I am looking at an issue with users not getting specific group policies.
After searching a number of client computers I found that the following error
The user '*' preference item in the 'User - 6th Form Students Policy {E03166E7-A848-48B5-AA93-97B848AA9C13}' Group Policy object did not apply because it failed with error code '0x80070003 The system cannot find the path specified.' This error was suppressed.
I can find the folder in the Sysvol folder on all of the domain controllers.
The issue with end users seems to be that the proxy settings for internet explorer is not being applied.
Potential problems?
one folder in sysvol entry is empty
\\<server>\SYSVOL\<domain.name>\Policies\{E03166E7-A848-48B5-AA93-97B848AA9C13}\User\microsoft\IEAK\LOCK
or is this our issue
The old method of configuring proxy settings to Internet Explorer 9 has changed?
https://support2.microsoft.com/kb/2530309?wa=wsignin1.0
http://thommck.wordpress.com/2013/11/08/the-new-way-to-configure-internet-explorer-proxy-settings-with-group-policy/

Hi all
In administering this policy I am a little confused.
We have a policy that distributes proxy settings in the internet explorer maintenance settings section - however when opening this policy up in GPO editor the internet explorer maintenance section is not present.
I plan to apply the settings via User/preferences/control panel settings/ internet settings (or registry settings from article) however I am unable to edit the settings for internet explorer maintenance and these will persist. Ideas????

Displaying the current users information instead of the value of the person who completed the form in the first place.

I found this fantatic post regarding querying the user profile service
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx?pi47623=2#comments
However i have an issue whenever the form is opened again either to view or edit, it displays the current users information
instead of the value of the person who completed the form in the first place.
Please help me, I'm turning more grey each minute

I think it is how the current user information is stored based on your logic.
You might be quering current value again when loading the form (Form load Rule).
you have to tweak your logic, after the user submits the form you can set the username to the one who saved it.
or in form load, write a logic to see if the form was not saved before and then query the username( by using internal field like "formstatue")
Hope this helps!
Ram - SharePoint Architect
Blog - SharePointDeveloper.in
Please vote or mark your question answered, if the reply helps you

The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.

VSS-00011: Connection to database instance <instance_name> failed.
Cause : The user account in which the Oracle VSS Writer Service is running does not have the DBA privileges to log in to the Oracle instance.
Action : Run the Oracle VSS Writer Service in a user account that can connect to the Oracle instance with DBA privileges.
I have assigned ora_dba group to the user that runs the Oracle VSS Writer Service which is the only Oracle solution but still getting
the above error. Was advised to raise the issue here that it is an OS issue. Pls help

The user account cannot access Oracle Database instance. And also how do you temporarily disable security software on the server.
Have you checked what I already asked for? "Try using the user account and access the Database Instance.
That will let you see if the problem is with the user account permissions or not."
If this does not help then you can contact Oracle as suggested by Dave.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Can't Log Any Users Onto My Domain Except the Administrator Getting The Following Error "The user profile service failed the logon"

Hi All,
I am currently completing a project for college which involves the creation of a domain, OU's, GPO's etc within a virtual environment.
I am using Windows Server 2008 Enterprise running this on VMware however after having completed and tested all my GPO's now none of my users are able to log on to the domain and keep getting the following error message "The user profile service failed
the logon" "User profile cannot be loaded".
I have tried to a lot of different options prior to posting which include:
Creating a new user account/s in case the previous user policies were corrupt the same error message is shown.
I also configured my DC to allow users to log onto the DC in case this was a network issue but the same error still exists.
My Administrator account always logs onto the DC without fail and applies all the GPO's as it should.
I have rebuilt my servers twice now at this stage and the same problems keep happening at first it was just confined to users within a single OU but now is Domain wide any suggestions on what I can do.
Thanks,
John

John,
Since this is a project, you may have experimented with various settings in multiple Group Policies, so I would recommend you run the Group Policy Modelling Wizard, as it will show you all the GP settings down to a specific user on a specific computer, plus
tell you which Group Policy sets and which settings, and thereby perhaps find where the problem occurs.
Please mark as answer or vote
as helpful when
it applies. Thanks!

Export failing with "The user does not have the required rights to perfrom

We are testing an upgrade to BOXI 3.1. We use the CrystalReportViewer .net web control to view the report. When the export button is clicked and the Crystal Reports file format is selected, the following error message is displayed:
"The user does not have the required rights to perfrom this operation. Please contact your administrator. "
Notice that perfrom is not spelled correctly. This is what actually gets displayed.
I'm not too concerned about the spelling, but I do want to fix the error. So I checked the security on the folder and the user does have full control. Both advanced security options are selected:
-View document instances that the user owns
-Export the report's data
So what else could be causing this?

I had applied the full control access to the wrong group. Once I applied that access to the user that actually generates the report, it worked.

Unable to load the user interface-please reinstall the application-Audigy 2 zs Platinum

unable to load the user interface-please reinstall the application---this is the message I get when my pc starts------Someone messing around with my computer tried to delete creative media source player 3 when they saw I had both 3 and 5 in folder and i get this error message every time I start my pc. In addition to this I have lost my EAX and THX consoles and my speaker settings are gone so I cannot adjust my 5. system at all. After I delete that error message when I click on the creative icon is sys tray instead of opening up the creative media player I get the error message--unable to load needed componants. Please reinstall the application. this is media player 3[version 3.32.]. I dont know why during the auto?updates through the last couple of years I have media player 3 in sys tray and if I need version 5 it is in file with 3--start-all programs-creative--any way my pc is a Cyberpower AMD FX-53 using win xp pro-32 bit-- and of course its a OEM product so they tell me the only way to get it to work is use the restoration cd they gave me when I bought the pc and it will revert back to its original state as when purchased. I would lose all my games, music, pictures?ect and would have to start from scratch.[ OR of course back everything up on a portable hard dri've]?It seems like there should be an easier way --hell I might as well buy a new soundcard and it would make it easier. If anyone?has an answer for someone who is not a tech head so I can understand please help !!--thank you in advance for any assistance as it is greatly appreciated. Sorry this message is so long winded, just irritating to have spen so much for a pc and not have the original installation disc.-tried moving to another slot and the fixes I saw posted here with no luck---thank you folks again--Tom

All the issues you guys are talking about have been reported in beta stage of these new drivers. I would say none of them has been fixed yet. The only solution for now is to use previous drivers which work fine or use some modified drivers which fixes some issues, but not all. Your choice.
[url="http://connect.creativelabs.com/windows/Lists/Audigy%20Issues/AllItems.aspx">Bug List[/url]
Message Edited by ronon0 on 08-07-2008 :47 AM

Send email to the Form Submitter instead of the process creator

Hi,
Can any one please show me how to make a process to send an email notification to the Form Submitter instead of the Process Creator.
Here is my brief desc on my process: Form Filler (can be anyone) send the filled form for a list of employees to the one who request (the 1st employee name on the list of the form) then this he/she then submit the form (form submitter) to process to route it to the manager. Whether the mgr is approved or denied then the process is completed by sending to his/her for status of that request. I was able to have it to send the email to the process creator (creator_id) but not the Form Sumitter. Can any one please help.
Thanks,
Han Dao

Hi Han
I guess I should have double checked the version with you first!
If I remember correctly, in 8.2.1 there are a few more steps involved.
On the Assign Task service...Form Data Mapping tab, is a field called "Completed user id".
This is:
The location to store the GUID (Global Unique Identifier) representing the user who completed the task. The data type is string.
You need to create a string variable to hold that value.
You select that in the "Completed user id" field.
Because this is a GUID, you will then have to do a User Lookup (under Foundation) to find your user.
(http://livedocs.adobe.com/livecycle/8.2/wb_help/wwhelp/wwhimpl/js/html/wwhelp.htm)
You can then use those results in the To field of the SendWithDocument.
Hope this helps.
Diana

My 5600 keeps defaulting to the fax first instead of the printer only how can i change that ?

my 5600 keeps defaulting to the fax first instead of the printer only how can i change that ?

What operating system?
In general you would go to the Printers (or Devices and Printers or Printers and Faxes) folder, right click on the 5600 and select Set as Default. Depending on your operating system you may need to do this as an administrative user.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How to clear text fields when the user navigates back to the screen

Hi,
Does anyone have any idea on how to clear the text input fields and dropdown boxes when the user navigates back to the screen, say for e.g. create screen?
My issue is that i have plenty of fields in the create screen within a form. Is there a way to avoid programaticaly blanking out every field and just do it at the form level using an api to reset to a state before the user entry?
Thanks

This code allows you to make it more generic, and you would need to tweak it if there are more than TextInput controls, but it should provide some ideas.
As far as using states, you could use SetProperty to set the text to empty, but that might be messier.
<?xml version="1.0"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml">
<mx:Script>
    <![CDATA[
      import mx.containers.FormItem;
      import mx.controls.TextInput;
      import mx.events.IndexChangedEvent;
      import mx.core.Container;
      private function clearSreen(evt:IndexChangedEvent):void{
        var view:Container = tn.selectedChild as Container;
        for each(var child:Object in view.getChildren()){
          if(child is FormItem){
            var subchild:DisplayObject = child.getChildAt(0);
            if(subchild is TextInput){
              TextInput(subchild).text = "";
    ]]>
</mx:Script>
<mx:TabNavigator id="tn" resizeToContent="true"
    change="clearSreen(event)">
    <mx:Form id="frm1" label="View Number One">
      <mx:FormItem label="First name:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Last name:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
    <mx:Form id="frm2" label="View Number Two">
      <mx:FormItem label="Address1:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Address2:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="City:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="State:">
        <mx:TextInput/>
      </mx:FormItem>
      <mx:FormItem label="Zip code:">
        <mx:TextInput/>
      </mx:FormItem>
    </mx:Form>
</mx:TabNavigator>
</mx:Application>
If this post answers your question or helps, please mark it as such. Thanks!
http://www.stardustsystems.com
Adobe Flex Development and Support Services

Is that possible to display the user selection data in the printable page?

Hi All,
I'm going to add a printablepage button on my page.
Here comes a questions.
Is that possible to display the user selection data in the printable page?
For example,
I have a table in the page,with 10 records.User select 5 of them.Can I display these 5 records in the printable page?
Please help.

Hi Yannick,
Thanks a lot for the information. It worked.
The portlet data can be accessible using bindings, but parameter name can be different.
Meanwhile I have got one more scenario, where the Portlet and Task Flow placed in different pages of WCP Application. On change of data in the Portlet the application should navigate to another page where the Task Flow placed and displays selected data.
Basically I can not use any button for navigation. The navigation should happen once I do some action in Portlet.
Is this possible? If yes can you please let me know the steps?
Thanks in advance!
Somnath
Edited by: Somnath Basak on Dec 20, 2011 9:41 AM

TS3623 purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

purchasing a movie from apple tv has stopped working. I click on "movies" and it takes me back to the same screen instead of the movies available. I have updated software, unplugged the modem & apple tv box, & the tv; Netflix still works!

Welcome to the Apple Community.
First you should try logging out of your iTunes Store account (settings > iTunes Store > accounts) and then back in again.
If that doesn't help, try resetting the Apple TV (Settings > General > Reset > Reset all settings). You should also try restarting your router.
If both of the above don't help, you should try a restore (Settings > General > Reset > Restore).

Create the user master records using the Enterprise Portal

Hello gurus!!
I'm configuring SRM 7.0 with EP.
I'm configuring the organizational structure, and steps guide (pdf and Solution Manager ) are:
1. Go to transaction SU01 and create an ABAP User. (SRMADMIN)
2. Assign this user the administrator role /SAPSRM/ADMINISTRATOR
3. As the administrator, creater the organizational plan
4. Create the remaining organizational unit
5. Using the Enterprise Portal application, Business Parter:Employee, create the user master records for the departmental managers.
How I must create the user in Enterprise Portal? What user I have to use to log on in the Enterprise Portal application? Has the user to be integrated in the organzational structure??
Thanks in advance!!!!
Best regards.
Maria.

Hi,
You can create users in WebDynpro application. You can also create users in USERS_GEN transaction.
Regards,
Masa

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

In Windows 8, how can I see an image of the psd file instead of the Photoshop icon?

There are a number of third party solutions for this. I just use Bridge, so can't recommend one in particular.

Populating the user group instead of the group ID in MFA

Similar Messages

Maybe you are looking for