Populating values in dynamically generated internal table
Hi,
We can generate internal tables dynamically and also populate them with values from database.But is there any way to populate the dynamically generated internal table(has 2-3 selected fields) with values from another internal table(has all fields required by the program) being populated within the same program?
Thanks & Regards,
Savitha
Hi
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Reward points if useful
Regards
Anji
Similar Messages
-
Passing values to dynamically created internal table
Hi,
I have the flat file data as
f1,f2,f3........so on
where f1 f2 and f3 are field names.
I have a variable var which contains the data
V1,0001,0002.........so on
data: var type string.
The value of field f1 is v1
The value of field f2 is 0001
The value of field f3 is 0002.......so on
FIELD-SYMBOLS: <fs_1> TYPE STANDARD TABLE
I have dynamically created an internal table for fields f1 f2 f3 ...... using
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = lt_fieldcatalog
IMPORTING
ep_table = <fs_data>
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ASSIGN <fs_data>->* TO <fs_1>.
Now for <fs_1> I have to pass the corresponding values of the fields f1 f2 f3 .
How can i solve this.
Thanks and regards ,
Parvatha ReddyHi,
There is no data in <fs_1>.
I need to pass the data form the string var to the fields of <fs_1>..
I understand that you want to populate the internal table <fs_1>.
for that you fist need work area.. use below statement to create work area..
DATA: new_line TYPE REF TO data.
CREATE DATA new_line LIKE LINE OF <fs_1>.
ASSIGN new_line->* TO <fs_2>.
<fs_2> is not your work aread...
to assign value to each field of you work aread <fs_2>. use statement
ASSIGN COMPONENT 1 OF STRUCTURE <fs_2> TO <fs_3>.
<fs_3> = f1 .
now <fs_3> will point to the first field of work area <fs_2>, f1 is value from your string .. repeat above for each field in workarea, by increasing the component number. Once your work area is filled
append it to table.
append <fs_2> to <fs_1>
apologies if I am not getting the requiremnt correctly.. -
Reg:doubt in dynamic generated internal table
hi everyone,
i generated a internal table dynamically,the output is in fied symbol,i want to create a internal table using the field symbol sturture,how to create that????
plz tell me how to create a internal table referencing field symbol structure........
very urgent plz help.........
thanks in advance....
regards,
balaji.sHi ,
check out a small part of an alv report which is using dynamic internal table
data: dy_table type ref to data,
dy_line type ref to data.
field-symbols: <dyn_table> type standard table,
<dyn_wa> type any,
<dyn_line> type any.
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
CREATE A DYNAMIC WORK AREA.
create data dy_line like line of <dyn_table>.
sort it_mard by matnr werks.
loop at it_mard into wa_mard.
at new matnr.
assign dy_line->* to <dyn_wa>.
assign component 'MATNR' of structure <dyn_wa> to <dyn_line>.
<dyn_line> = wa_mard-matnr.
read table it_mard2 into wa_mard1 with key matnr = wa_mard-matnr.
v_amount = wa_mard1-v_total * p_unit.
call function 'SPELL_AMOUNT'
exporting
amount = v_amount
currency = 'INR'
FILLER = ' '
language = sy-langu
importing
in_words = v_price
exceptions
not_found = 1
too_large = 2
others = 3
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
assign component 'V_TOTAL' of structure <dyn_wa> to <dyn_line>.
<dyn_line> = wa_mard1-v_total.
assign component 'V_PRICE' of structure <dyn_wa> to <dyn_line>.
<dyn_line> = v_price-word.
endat.
concatenate 'STOCK' '-' 'IN' '-' wa_mard-werks into v_new.
assign component v_new of structure <dyn_wa> to <dyn_line>.
<dyn_line> = wa_mard-labst.
at end of matnr.
append <dyn_wa> to <dyn_table>.
clear wa_mard.
clear <dyn_wa>.
unassign <dyn_line>.
unassign <dyn_wa>.
endat.
endloop.
rewards points if helpful. -
How to upload an excel to a dynamically generated internal table?
Hi,
I have an excel sheet. I have to create an internal table dynamically according to the fields of the excel sheet. The internal table i have created successfully, the fields are exactly coming as the excel sheet. I need to upload the excel sheet directly to my Internal table.
Similar to the FM GUI_UPLOAD, which directly uploads the text document into the internal table
I am not able to pass my dynamic internal table to the GUI_UPLOAD, The tables parameter in the GUI_UPLOAD is accepting only the standard tables.
How to do?
-SudheerHi,
Use TEXT_CONVERT_XLS_TO_SAP Function Module.
AWARD POINTS IF USEFUL -
How to create dynamic nested internal table
Hi Experts,
Pleae tell me or give sample code, how to create dynamic nested internal table ?
I have seen threads saying creation of dynamic internal tables using some table structure only. But now the requirement is to create dynamic nested internal table.
For example the internal table contains two fields viz., one is field1 of dynamic internal table and other is normal field2 and values as shown below:
Nested internal table:
field1 | field2 ...
<table content1> | value2..
<table content1> | value2..
Here the [table content] should also a dynamic internal table.
Let me know if you need any other info.
regards
Saravanan Rsee the complete code..i am currently working in ECC6.0 EHP4. just check which version you are using..
REPORT yst_test_000.
DATA:
lt_comptab TYPE cl_abap_structdescr=>component_table,
ls_comp LIKE LINE OF lt_comptab,
lref_newstr TYPE REF TO cl_abap_structdescr,
lref_tab_type TYPE REF TO cl_abap_tabledescr,
lt_fcat TYPE lvc_t_fcat,
ls_fcat TYPE lvc_s_fcat,
ls_dd03p TYPE dd03p,
lt_data type ref to data.
field-symbols: <fs_table> type standard table.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
i_structure_name = 'SCARR'
CHANGING
ct_fieldcat = lt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc NE 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
LOOP AT lt_fcat INTO ls_fcat.
IF ls_fcat-ref_table IS NOT INITIAL.
CLEAR ls_dd03p.
CALL FUNCTION 'BUS_DDFIELD_GET'
EXPORTING
i_tabnm = ls_fcat-ref_table
i_fldnm = ls_fcat-fieldname
IMPORTING
e_dd03p = ls_dd03p
EXCEPTIONS
field_not_found = 1
OTHERS = 2.
IF sy-subrc EQ 0.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_dd03p-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
ENDIF.
ELSE.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
ENDIF.
ENDLOOP.
*Now for the Field which you want deep table then you can do like this
ls_fcat-fieldname = 'NESTED_TABLE'.
ls_fcat-inttype = 'C'.
ls_fcat-intlen = '000006'.
ls_fcat-rollname = 'SFLIGHT_TAB1'. "For SFLIGHT
APPEND ls_fcat TO lt_fcat.
ls_comp-name = ls_fcat-fieldname.
ls_comp-type ?= cl_abap_datadescr=>describe_by_name( ls_fcat-rollname ).
APPEND ls_comp TO lt_comptab.
CLEAR ls_comp.
lref_newstr = cl_abap_structdescr=>create( lt_comptab ).
lref_tab_type = cl_abap_tabledescr=>create( lref_newstr ).
create data lt_data type handle lref_tab_type.
assign lt_data->* to <fs_table>.
break-point.
Edited by: Vijay Babu Dudla on Apr 28, 2009 8:05 AM -
Uploading data from excel file to a dynamically created internal table
Hi,
I have a requirement where i have to upload data from an excel file into a database table. I would be able to determine the structure of the table only at runtime based on the user input.. so i have created an internal table dynamically.
Could you please tell me if its possible to upload data from an excel file to the dynamically created internal table using any function modules?
I thought of doing this by declaring a generic internal table of one field and then uploading the *.csv file into it and then splitting it based on "," and then assigning it to the field symbol referencing the internal table.. but my file length exceeds 132 characters and i'm only able to get data of lenght 132 char's in my internal table ( generic one).
Could anyone please show me a way around this.
Thanks in advance,
HarshaSure, check this out.
report zrich_0002.
type-pools: slis.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: it_fldcat type lvc_t_fcat,
wa_it_fldcat type lvc_s_fcat.
type-pools : abap.
data: new_table type ref to data,
new_line type ref to data.
data: iflat type table of string.
data: xflat type string.
data: irec type table of string with header line.
data: tabix type sy-tabix.
data: file type string.
selection-screen begin of block b1 with frame title text .
parameters: p_file type rlgrap-filename default 'c:Test.csv'.
parameters: p_flds type i.
selection-screen end of block b1.
start-of-selection.
* Add X number of fields to the dynamic itab cataelog
do p_flds times.
clear wa_it_fldcat.
wa_it_fldcat-fieldname = sy-index.
wa_it_fldcat-datatype = 'C'.
wa_it_fldcat-inttype = 'C'.
wa_it_fldcat-intlen = 10.
append wa_it_fldcat to it_fldcat .
enddo.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = it_fldcat
importing
ep_table = new_table.
assign new_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data new_line like line of <dyn_table>.
assign new_line->* to <dyn_wa>.
file = p_file.
call method cl_gui_frontend_services=>gui_upload
exporting
filename = file
changing
data_tab = iflat
exceptions
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
others = 17.
loop at iflat into xflat.
clear irec. refresh irec.
split xflat at ',' into table irec.
loop at irec.
tabix = sy-tabix.
assign component tabix of structure <dyn_wa> to <dyn_field>.
<dyn_field> = irec.
endloop.
append <dyn_wa> to <dyn_table>.
endloop.
* Write out data from table.
loop at <dyn_table> into <dyn_wa>.
do.
assign component sy-index of structure <dyn_wa> to <dyn_field>.
if sy-subrc <> 0.
exit.
endif.
if sy-index = 1.
write:/ <dyn_field>.
else.
write: <dyn_field>.
endif.
enddo.
endloop.
Regards,
Rich Heilman -
Appending column to an dynamically created internal table
Hi folks,
i have an dynamically created internal table <dyn_tab> which is based on a parameter p_table ( containing the table name ). now i want to add one more column to this <dyn_tab> table where i can store further information in. how can i do that ?
i appreciate your help!Hi,
Please check this sample program.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
<dyn_wa>,
<dyn_field>.
data: dy_table type ref to data,
dy_line type ref to data,
xfc type lvc_s_fcat,
ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
form get_structure.
data : idetails type abap_compdescr_tab,
xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
* Get the structure of the table.
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
clear xfc.
xfc-fieldname = xdetails-name .
xfc-datatype = xdetails-type_kind.
xfc-inttype = xdetails-type_kind.
xfc-intlen = xdetails-length.
xfc-decimals = xdetails-decimals.
append xfc to ifc.
endloop.
*Add your new field(s) into table ifc here.
endform.
form create_dynamic_itab.
* Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
exporting
it_fieldcatalog = ifc
importing
ep_table = dy_table.
assign dy_table->* to <dyn_table>.
* Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
Regards,
Ferry Lianto -
Add field value to the existing internal table.
how to add a field value to the existing internal table.
DATA: BEGIN OF ITAB occurs 0,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
amount(10) type c,
END OF ITAB.
select * from ekpo
into corresponding fields of table itab.
itab-amount = '2400'.
loop at itab where ebeln eq 70 .
write : / sy-tabix,itab-ebeln,itab-ebelp,itab-aedat,itab-amount.
endloop.
here output is not showing the amount field value.
please tell me how to solve this problem urgent
thanks in advance.Hi Sekhar,
First let me know wheather you are assigning some value to the amount field externally to all records? if this is wright means check the below code.
DATA: BEGIN OF ITAB occurs 0,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
END OF ITAB.
select * from ekpo
into corresponding fields of table itab.
v_amount = '2400'.
loop at itab where ebeln eq 70 .
write : / sy-tabix,itab-ebeln,itab-ebelp,itab-aedat,v_amount.
endloop.
or if you want to modify perticular records in itab then use below code.
DATA: BEGIN OF ITAB occurs 0,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
AEDAT TYPE EKPO-AEDAT,
amount(10) type c,
END OF ITAB.
select * from ekpo
into corresponding fields of table itab.
loop at itab.
itab-amount = '2400'.
modify itab index sy-tabix (or perticular line number).
endloop.
loop at itab where ebeln eq 70 .
write : / sy-tabix,itab-ebeln,itab-ebelp,itab-aedat,itab-amount.
endloop.
Thanks,
Suma. -
Dynamically changing internal table in 'gui_download'
Hi Experts,
i have to download 4 internal tables, each with different structures, to the presentation server using 'gui_download', based on which radio-button is selected in the selection screen. I am hoping to use a single 'form' and 4 'perform' calls. how can I dynamically change the tables in the 'gui_download' function modules.
plz help.....................Hi ,
Build the field catalog dynamically based on the internal table structure based on the radio button selected.Use the dynamic internal table generated from the filedcatalog and use in GUI_DOWNLOAD.
See the below code:
*& Report ZRAJESH02
REPORT zrajesh02.
Dynamic internal table
TYPE-POOLS: slis.
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa>.
DATA: alv_fldcat TYPE slis_t_fieldcat_alv,
it_fldcat TYPE lvc_t_fcat.
DATA: lv_monate TYPE f,
lv_months TYPE i,
lv_date TYPE sy-datum,
p_check1 type n value '1'.
lv_date = sy-datum + 360.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: p_check TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
CALL FUNCTION 'MONTHS_BETWEEN_TWO_DATES'
EXPORTING
i_datum_bis = lv_date
i_datum_von = sy-datum
i_kz_incl_bis = ' '
IMPORTING
e_monate = lv_monate.
lv_months = lv_monate.
PERFORM f_fcat USING 'AUFNR' 'CHAR' '12'.
PERFORM f_fcat USING 'POSNR' 'CHAR' '06'.
while p_check1 LE p_check.
PERFORM f_fcat USING p_check1 'CHAR' '1'.
p_check1 = p_check1 + 1.
endwhile.
PERFORM build_dyn_itab.
LOOP AT <dyn_table> INTO <dyn_wa>.
WRITE:/ <dyn_wa>.
ENDLOOP.
FORM f_fcat USING fieldname dattyp length.
DATA:wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = fieldname.
wa_it_fldcat-datatype = dattyp.
wa_it_fldcat-intlen = length.
APPEND wa_it_fldcat TO it_fldcat .
ENDFORM. "f_fcat
*& Form build_dyn_itab
text
FORM build_dyn_itab.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data.
wa_it_fldcat TYPE lvc_s_fcat.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'AUFNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 12.
APPEND wa_it_fldcat TO it_fldcat .
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = 'POSNR'.
wa_it_fldcat-datatype = 'CHAR'.
wa_it_fldcat-intlen = 6.
APPEND wa_it_fldcat TO it_fldcat .
Create dynamic internal table and assign to FS
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA new_line LIKE LINE OF <dyn_table>.
ASSIGN new_line->* TO <dyn_wa>.
ENDFORM. "build_dyn_itab
Thanks,
Rajesh. -
How to add source message filed value in dynamic generated xml file ??
Hi Friends..
in my idoc to file....
i want to add one of my source idoc fields value in the dynamic generated file....
filename _field.xml...
so how to get that filed value in java section ...
i am not using that field in mapping..
please help me...
regards
ramHi,
<i> <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Trace xmlns:SAP="http://sap.com/xi/XI/Message/30">
<Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- <!-- ************************************
-->
<Trace level="1" type="T">User: s_ra</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="2" type="T">Tunneling needed?</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="3" type="T">Sender Interface</Trace>
<Trace level="3" type="T">IORDER.IORDER01 urn:sap-com:document:sap:idoc:messages</Trace>
<Trace level="1" type="T">Syntax-Check-Flag X</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPSRD</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_STRUCTURE_GET Details</Trace>
<Trace level="2" type="T">Port : SAPSRD</Trace>
<Trace level="2" type="T">IDoctyp : IORDER01</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">RFCDest :</Trace>
<Trace level="2" type="T">Release : 640</Trace>
<Trace level="2" type="T">Version : 3</Trace>
<Trace level="2" type="T">Direct : 1</Trace>
<Trace level="2" type="T">SAPREL : 640</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
<Trace level="1" type="T">Make Syntax check of actual Idoc</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">IDX_SYNTAX_CHECK</Trace>
<Trace level="2" type="T">Port : SAPSRD</Trace>
<Trace level="2" type="T">IDoctyp : IORDER01</Trace>
<Trace level="2" type="T">Cimtyp :</Trace>
<Trace level="2" type="T">----
</Trace>
<Trace level="2" type="T">Create XML-Control Record</Trace>
<Trace level="2" type="T">Create XML-Data Records</Trace>
<Trace level="3" type="T">Create data Record E1ORHDR</Trace>
<Trace level="3" type="T">Create data Record E1OROPR</Trace>
</Trace>
<Trace level="2" type="T">Partytype = LS fallback to logical system</Trace>
<Trace level="2" type="T">Set Sender Routing-object</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_MAIN-SET_START_PIPELINE" />
- <!-- ************************************
-->
<Trace level="3" type="T">XMB was called with external pipeline PID = ENTRY</Trace>
<Trace level="3" type="T">Getting type of XMB...</Trace>
<Trace level="1" type="B" name="SXMBCONF-SXMB_GET_XMB_USE" />
<Trace level="2" type="T">XMB kind = CENTRAL</Trace>
<Trace level="3" type="T">Start pipeline found</Trace>
<Trace level="2" type="T">Switch to external start pipeline PID = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_TROUBLESHOOT-ENTER_PLSRV">
<Trace level="3" type="T">No triggers found. OK.</Trace>
</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">XMB entry processing</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:28Z CET</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">* *</Trace>
<Trace level="1" type="T">****************************************************</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_UC_EXECUTE" />
- <!-- ************************************
-->
<Trace level="1" type="T">Message-GUID = 4580F8399E23011E000000000A967130</Trace>
<Trace level="1" type="T">PLNAME = CENTRAL</Trace>
<Trace level="1" type="T">QOS = EO</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_ASYNC" />
- <!-- ************************************
-->
<Trace level="3" type="T">QOS = EO</Trace>
<Trace level="3" type="T">Message-GUID = 4580F8399E23011E000000000A967130</Trace>
<Trace level="1" type="T">Get definition of external pipeline = CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Get definition of internal pipeline = SAP_CENTRAL</Trace>
<Trace level="3" type="T">Generate prefixed queue name</Trace>
<Trace level="1" type="T">Queue name : XBTI0008</Trace>
<Trace level="1" type="T">Generated prefixed queue name = XBTI0008</Trace>
<Trace level="1" type="T">Schedule message in qRFC environment</Trace>
<Trace level="3" type="T">Setup qRFC Scheduler</Trace>
<Trace level="1" type="T">Setup qRFC Scheduler OK!</Trace>
<Trace level="3" type="T">Call qRFC .... MsgGuid = 4580F8399E23011E000000000A967130</Trace>
<Trace level="3" type="T">Call qRFC .... Version = 000</Trace>
<Trace level="3" type="T">Call qRFC .... Pipeline = CENTRAL</Trace>
<Trace level="3" type="T">OK.</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Going to persist message</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">- Exit CALL_PIPELINE_ASYNC</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="3" type="T">Version number = 000</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 001</Trace>
<Trace level="3" type="T">Message version 000</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 000</Trace>
<Trace level="2" type="T">Increment log sequence to 001</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
- <Trace level="1" type="B" name="PLSRV_RECEIVER_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_RD_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_RD_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">R E C E I V E R - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Start without given receiver</Trace>
<Trace level="2" type="T">Classic Receiver Determination via Rules.</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 1</Trace>
<Trace level="3" type="T">...create rule engine</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 2</Trace>
<Trace level="2" type="T">......extracting (new) for Extractor: XP /IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL</Trace>
<Trace level="2" type="T">......extracting values found: 1</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_2_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 2</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 1</Trace>
<Trace level="2" type="T">...valid Receiver with Condition: - BS_FTP_MES_1_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 3</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 3</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_3_WorkOrder_Create</Trace>
<Trace level="2" type="T">Check conditions for rule line no. 4</Trace>
<Trace level="3" type="T">...call rule engine for Condition %CL_SAI_SWF_RULE_ENGINE.MSG_GET(MSG=&_MSG&;NSP=&_NSM&;XPATH="/IORDER01/IDOC/E1ORHDR/E1OROPR/ARBPL")% CE 4</Trace>
<Trace level="2" type="T">...invalid Receiver: - BS_FTP_MES_4_WorkOrder_Create</Trace>
<Trace level="2" type="T">No Receiver found behaviour: 0</Trace>
<Trace level="2" type="T">Number of Receivers:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET End of pipeline service processing PLSRVID= PLSRV_RECEIVER_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 001</Trace>
<Trace level="3" type="T">Message version 001</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
- <Trace level="1" type="B" name="PLSRV_INTERFACE_DETERMINATION">
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_ID_PLSRV</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL">
- <Trace level="1" type="B" name="CL_ID_PLSRV-ENTER_PLSRV">
<Trace level="1" type="T">I N T E R F A C E - D E T E R M I N A T I O N</Trace>
<Trace level="1" type="T">Cache Content is up to date</Trace>
<Trace level="2" type="T">Check conditions for (Inb: Party Srvc If) BS_FTP_MES_1_WorkOrder_Create MI_IN_MES_WorkOrderCreation</Trace>
<Trace level="2" type="T">...valid InbIf without Condition: MI_IN_MES_WorkOrderCreation</Trace>
<Trace level="2" type="T">Number of receiving Interfaces:1</Trace>
</Trace>
</Trace>
</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET End of pipeline service processing PLSRVID= PLSRV_INTERFACE_DETERMINATION</Trace>
</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_LOG_TO_PERSIST">
<Trace level="3" type="T">Persisting message after plsrv call</Trace>
<Trace level="3" type="T">Message-Version = 002</Trace>
<Trace level="3" type="T">Message version 002</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
</Trace>
<Trace level="1" type="B" name="PLSRV_RECEIVER_MESSAGE_SPLIT" />
- <!-- ************************************
-->
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV">
<Trace level="3" type="T">Calling pipeline service: PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_RECEIVER_SPLIT</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_XMS_PLSRV_RECEIVER_SPLIT-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Case handling for different plsrv_ids PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="2" type="T">got property produced by receiver determination</Trace>
<Trace level="1" type="T">number of receivers: 1</Trace>
<Trace level="1" type="T">Single-receiver split case</Trace>
<Trace level="1" type="T">Post-split internal queue name = XBTOR1__0000</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Persisting single message for post-split handling</Trace>
<Trace level="1" type="T" />
<Trace level="1" type="T">Going to persist message + call qRFC now...</Trace>
<Trace level="1" type="T">NOTE: The following trace entries are always lacking</Trace>
<Trace level="1" type="T">- Exit WRITE_MESSAGE_TO_PERSIST</Trace>
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-WRITE_MESSAGE_TO_PERSIST" />
- <!-- ************************************
-->
<Trace level="3" type="T">Persisting message Status = 012</Trace>
<Trace level="3" type="T">Message version 003</Trace>
<Trace level="3" type="T">Pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-PERSIST_READ_MESSAGE">
<Trace level="3" type="T">Trace object available again now. OK.</Trace>
<Trace level="3" type="T">Message was read from persist layer. OK.</Trace>
<Trace level="3" type="T">Message properties in XMB object were setup. OK.</Trace>
<Trace level="3" type="ToDo">Make sure we catch exceptions in persist read</Trace>
<Trace level="3" type="ToDo">Tracing obj. not avail. before return of CL_XMS_MAIN-PERSIST_READ_MESSAGE</Trace>
</Trace>
<Trace level="1" type="T">Note: the following trace entry is written delayed (after read from persist)</Trace>
<Trace level="1" type="B" name="SXMS_ASYNC_EXEC" />
- <!-- ************************************
-->
<Trace level="3" type="T">message version successfully read from persist version= 004</Trace>
<Trace level="2" type="T">Increment log sequence to 005</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="T">Starting async processing with pipeline CENTRAL</Trace>
<Trace level="3" type="T">system-ID = DGX</Trace>
<Trace level="3" type="T">client = 100</Trace>
<Trace level="3" type="T">language = E</Trace>
<Trace level="3" type="T">user = s_ra</Trace>
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET</Trace>
<Trace level="1" type="T">----
</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PIPELINE_SYNC" />
- <!-- ************************************
-->
<Trace level="1" type="T">Get definition of external pipeline CENTRAL</Trace>
- <Trace level="1" type="B" name="CL_XMS_MAIN-LOOKUP_INTERNAL_PL_ID">
<Trace level="3" type="T">External PLID = CENTRAL</Trace>
<Trace level="3" type="T">Internal PLID = SAP_CENTRAL</Trace>
</Trace>
<Trace level="1" type="T">Corresponding internal pipeline SAP_CENTRAL</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline attributes</Trace>
<Trace level="3" type="T">PID = SAP_CENTRAL</Trace>
<Trace level="3" type="T">ENABLE = 1</Trace>
<Trace level="3" type="T">TRACELEVEL = 0</Trace>
<Trace level="3" type="T">EXEMODE = A</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline elements</Trace>
<Trace level="3" type="T">ELEMPOS = 0001</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0002</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_INTERFACE_DETERMINATION</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0003</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_RECEIVER_MESSAGE_SPLIT</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0004</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0007</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_OUTBOUND_BINDING</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0008</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">ELEMPOS = 0009</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_RESPONSE</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">FL_DUMMY =</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T" />
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Begin of pipeline processing PLSRVID = CENTRAL</Trace>
<Trace level="1" type="T">Start with pipeline element PLEL= 5EC3C53B4BB7B62DE10000000A1148F5</Trace>
<Trace level="1" type="B" name="PLSRV_MAPPING_REQUEST" />
- <!-- ************************************
-->
<Trace level="1" type="Timestamp">2006-12-14T10:44:29Z CET Start of pipeline service processing PLSRVID= PLSRV_MAPPING_REQUEST</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV" />
- <!-- ************************************
-->
<Trace level="3" type="T">Calling pipeline service: PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_MAPPING_REQUEST</Trace>
<Trace level="3" type="T">PLSRVTYPE =</Trace>
<Trace level="3" type="T">ADRESSMOD = LOCAL</Trace>
<Trace level="3" type="T">P_CLASS = CL_MAPPING_XMS_PLSRV3</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />
- <!-- ************************************
-->
<Trace level="1" type="B" name="CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV" />
- <!-- ************************************
-->
<Trace level="2" type="T">......attachment XI_Context not found</Trace>
<Trace level="3" type="T">Append context with name =SNDPOR and value =SAPSRD</Trace>
<Trace level="3" type="T">Append context with name =SNDPRN and value =SRDCLNT400</Trace>
<Trace level="3" type="T">Append context with name =SNDPRT and value =LS</Trace>
<Trace level="3" type="T">Append context with name =RCVPOR and value =SAPDGX</Trace>
<Trace level="3" type="T">Append context with name =RCVPRN and value =DGX100</Trace>
<Trace level="3" type="T">Append context with name =RCVPRT and value =LS</Trace>
<Trace level="3" type="T">Append context with name =MESTYP and value =IORDER</Trace>
<Trace level="3" type="T">Append context with name =IDOCTYP and value =IORDER01</Trace>
<Trace level="3" type="T">Append context with name =CIMTYP and value =</Trace>
<Trace level="3" type="T">Mapping is already determined in the interface determination</Trace>
<Trace level="3" type="T">Object ID of Interface Mapping 6FF8D506C84B3050B127F2EF024B796F</Trace>
<Trace level="3" type="T">Version ID of Interface Mapping B2CF8EF067FF11DBA742D7830A967135</Trace>
<Trace level="1" type="T">Interface Mapping http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES IM_SAP_IORDER_To_WorkOrder_Creation</Trace>
<Trace level="3" type="T">Mapping Steps 1 JAVA com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="3" type="T">Dynamic Configuration ( http://sap.com/xi/XI/System/IDoc SNDPOR SAPSRD ) ( http://sap.com/xi/XI/System/IDoc SNDPRN SRDCLNT400 ) ( http://sap.com/xi/XI/System/IDoc SNDPRT LS ) ( http://sap.com/xi/XI/System/IDoc RCVPOR SAPDGX ) ( http://sap.com/xi/XI/System/IDoc RCVPRN DGX100 ) ( http://sap.com/xi/XI/System/IDoc RCVPRT LS ) ( http://sap.com/xi/XI/System/IDoc MESTYP IORDER ) ( http://sap.com/xi/XI/System/IDoc IDOCTYP IORDER01 ) ( http://sap.com/xi/XI/System/IDoc CIMTYP )</Trace>
<Trace level="2" type="T">Mode 0</Trace>
<Trace level="3" type="T">Creating Java mapping com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.</Trace>
<Trace level="3" type="T">Load b2cf8ef0-67ff-11db-a742-d7830a967135, http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES, -1, com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.class.</Trace>
<Trace level="3" type="T">Search com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_.class (http://aaaa.com/xi/SAP_ERP_azar/PPE/ERP_MES, -1) in swcv b2cf8ef0-67ff-11db-a742-d7830a967135.</Trace>
<Trace level="3" type="T">Loaded class com.sap.xi.tf._MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="2" type="T">Call method execute of the application Java mapping com.sap.xi.tf._MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="1" type="T">RuntimeException during appliction Java mapping com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_</Trace>
<Trace level="1" type="T">com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Caused by: java.lang.IllegalArgumentException: Cannot cast null to boolean at com.sap.aii.mappingtool.flib3.Bool.toBoolean(Bool.java:17) at com.sap.aii.mappingtool.flib3.Bool.equals(Bool.java:37) ... 37 more</Trace>
<Trace level="1" type="T">Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322]</Trace>
<Trace level="1" type="T">com.sap.aii.ibrun.server.mapping.MappingRuntimeException: Runtime exception occurred during execution of application mapping program com/sap/xi/tf/_MM_SAP_IORDER_To_MES_WorkOrderCreation_: com.sap.aii.utilxi.misc.api.BaseRuntimeException; RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:73) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: RuntimeException in Message-Mapping transformation: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:357) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.mappingtool.tf3.MessageMappingException: Runtime exception during processing target field mapping /ns0:WorkOrders. The message is: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: com.sap.aii.utilxi.misc.api.BaseRuntimeException: Exception:[java.lang.IllegalArgumentException: Cannot cast null to boolean] in class com.sap.aii.mappingtool.flib3.Bool method equals[null, , com.sap.aii.mappingtool.tf3.rt.Context@160d5322] at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:56) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Root Cause: java.lang.reflect.InvocationTargetException at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:47) at com.sap.aii.mappingtool.tf3.rt.FunctionWrapper.getValue(FunctionWrapper.java:41) at com.sap.aii.mappingtool.flib3.IfWithoutElse.getValue(IfWithoutElse.java:18) at com.sap.aii.mappingtool.tf3.AMappingProgram.processNode(AMappingProgram.java(Compiled Code)) at com.sap.aii.mappingtool.tf3.AMappingProgram.start(AMappingProgram.java:352) at com.sap.aii.mappingtool.tf3.Transformer.start(Transformer.java:60) at com.sap.aii.mappingtool.tf3.AMappingProgram.execute(AMappingProgram.java:105) at com.sap.aii.ibrun.server.mapping.JavaMapping.executeStep(JavaMapping.java:64) at com.sap.aii.ibrun.server.mapping.Mapping.execute(Mapping.java:91) at com.sap.aii.ibrun.server.mapping.MappingHandler.run(MappingHandler.java:90) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleMappingRequest(MappingRequestHandler.java:95) at com.sap.aii.ibrun.sbeans.mapping.MappingRequestHandler.handleRequest(MappingRequestHandler.java:68) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceImpl.processFunction(MappingServiceImpl.java:79) at com.sap.aii.ibrun.sbeans.mapping.MappingServiceObjectImpl0.processFunction(MappingServiceObjectImpl0.java:131) at sun.reflect.GeneratedMethodAccessor4712.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.ejb.session.stateless_sp5.ObjectStubProxyImpl.invoke(ObjectStubProxyImpl.java:187) at $Proxy194.processFunction(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java(Compiled Code)) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java(Compiled Code)) at java.lang.reflect.Method.invoke(Method.java(Compiled Code)) at com.sap.engine.services.rfcengine.RFCDefaultRequestHandler.handleRequest(RFCDefaultRequestHandler.java:100) at com.sap.engine.services.rfcengine.RFCJCOServer.handleRequestInternal(RFCJCOServer.java:113) at com.sap.engine.services.rfcengine.RFCJCOServer$ApplicationRunnable.run(RFCJCOServer.java:171) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java(Compiled Code)) at java.security.AccessController.doPrivileged1(Native Method) at java.security.AccessController.doPrivileged(AccessController.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java(Compiled Code)) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java(Compiled Code)) Caused by: java.lang.IllegalArgumentException: Cannot cast null to boolean at com.sap.aii.mappingtool.flib3.Bool.toBoolean(Bool.java:17) at com.sap.aii.m -
How to save value in struture into internal table?
good day to everyone,
i have a prb with my coding below. i am trying to save the value tvbdpr-uecha into wa_zmas-uecha by using modify as shown below.
however, the value uecha is not successfully being transported/saved into it_zmas.
could anyone guide me?
tvbdpr - is a structure table
it_zmas - is an internal table
LOOP AT tvbdpr WHERE posnr = wa_zmas-posnr AND matnr = wa_zmas-matnr.
wa_zmas-uecha = tvbdpr-uecha.
MODIFY TABLE it_zmas FROM wa_zmas TRANSPORTING uecha.
thank you
regards,
swHi,
If the internal table is already having contents and u need to modify it for the field uecha, you can try the following
LOOP AT tvbdpr WHERE posnr = wa_zmas-posnr AND matnr = wa_zmas-matnr.
wa_zmas-uecha = tvbdpr-uecha.
READ TABLE it_zmas with KEY posnr = wa_zmas-posnr matnr = wa_zmas-matnr.
if sy-subrc = 0.
it_zmas-uecha = wa_zmas-uecha.
MODIFY it_zmas index sy-index.
clear it_zmas-uecha.
endif.
ENDLOOP.
Else if the internal table is empty and you are populating the field uecha, use append
LOOP AT tvbdpr WHERE posnr = wa_zmas-posnr AND matnr = wa_zmas-matnr.
wa_zmas-uecha = tvbdpr-uecha.
it_zmas-uecha = wa_zmas-uecha.
append it_zmas.
clear it_zmas.
ENDLOOP.
Regards,
Vik -
Dynamic ALV Internal table Problem
Hi all,I have successfully built an IT using method 'create_dynamic_table'.But my problems are :
1)When Iam trying to select the data with multiple tables then it is short dumping.
2)I tried to oselect the data using one table,after selecting the data if I use FM REUSE_ALV_Grid_Display then it is showing short dump with error 'type conflict when calling FM'.
I never used field symbols before.PLZ complete my program or give me suffecient feedback.Here is my program :
DATA : g_tdref TYPE REF TO data,
g_wdref TYPE REF TO data.
DATA : dats LIKE vbbe-mbdat,
t_fieldcat TYPE lvc_t_fcat,
wa_fieldcat TYPE lvc_s_fcat.
FIELD-SYMBOLS : <it_dyn> TYPE STANDARD TABLE,
<wa_dyn>,
<dyn_field>.
SELECTION-SCREEN BEGIN OF BLOCK blk1 WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_mbdat FOR dats.
SELECTION-SCREEN END OF BLOCK blk1.
wa_fieldcat-tabname = 'MSKA'.
wa_fieldcat-fieldname = 'WERKS'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'MSKA'.
wa_fieldcat-fieldname = 'MATNR'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-seltext = 'Material Number'.
wa_fieldcat-intlen = '18'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'MAKT'.
wa_fieldcat-fieldname = 'MAKTX'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = 'MBDAT'.
wa_fieldcat-datatype = 'CHAR'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = 'OMENG'.
wa_fieldcat-datatype = 'QUAN'.
wa_fieldcat-intlen = '10'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
DATA : d TYPE i,
v(02) TYPE n VALUE '0',
day(8) TYPE c.
d = s_mbdat-high - s_mbdat-low + 1.
DO d TIMES.
v = v + 1.
CONCATENATE 'Day' v INTO day.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = day.
wa_fieldcat-datatype = 'DATS'.
wa_fieldcat-seltext = day.
wa_fieldcat-intlen = '8'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
ENDDO.
*-----Building Dynamic internal table.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fieldcat
IMPORTING
ep_table = g_tdref.
ASSIGN g_tdref->* TO <it_dyn>.
CREATE DATA g_wdref LIKE LINE OF <it_dyn>.
ASSIGN g_wdref->* TO <wa_dyn>.
SELECT m~werks m~matnr v~omeng v~mbdat INTO CORRESPONDING FIELDS
OF TABLE <it_dyn> FROM mska AS m INNER JOIN vbbe AS v
ON m~posnr = v~posnr WHERE v~mbdat IN s_mbdat.*DATA : d TYPE i,
v(02) TYPE n VALUE '0',
day(8) TYPE c.
*d = s_mbdat-high - s_mbdat-low + 1.
*DO d TIMES.
v = v + 1.
CONCATENATE 'Day' v INTO day.
wa_fieldcat-tabname = 'VBBE'.
wa_fieldcat-fieldname = day.
wa_fieldcat-datatype = 'DATS'.
wa_fieldcat-seltext = day.
wa_fieldcat-intlen = '8'.
APPEND wa_fieldcat TO t_fieldcat.
CLEAR : wa_fieldcat.
*ENDDO.
*-----Building Dynamic internal table.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = t_fieldcat
IMPORTING
ep_table = g_tdref.
ASSIGN g_tdref->* TO <it_dyn>.
CREATE DATA g_wdref LIKE LINE OF <it_dyn>.
ASSIGN g_wdref->* TO <wa_dyn>.
SELECT OMENG FROM VBBE INTO CORRESPONDING FIELDS OF TABLE <IT_DYN> WHERE MBDAT IN S_MBDAT.
BREAK-POINT.
YOU WILL GET VALUES IN INTERNAL TABLE.
TO SOLVE YOUR ISSUE YOU SHOULD USE NUM INSTEAD OF DATS. -
Populating Empty Fields for Existing Internal Table Using For All Entries
I have an internal table called itab_extract that populates without any issues in SELECT A and SELECT B below. Trying to avoid looping, I am using select DB table 'for all entries' in itab_extract. I want the empty fields in itab_extract to populate from the values in the database. However, about 200,000 entries are being appended to the table, and, the values that existed for the already populated fields in itab_extract are gone, and the new fields are populated.
I've played with the syntax and cannot seem to get it to work. My next option is a time consuming loop.
How should the for all entries syntax look to accomplish filling the empty fields in the itab? Thank-You
*read ekko
select ebeln lifnr aedat bsart from ekko *SELECT A*
into CORRESPONDING FIELDS OF TABLE me->itab_extract
where aedat in r_aedat.
select ebeln lifnr aedat BSART from ekko *SELECT B*
appending CORRESPONDING FIELDS OF TABLE me->itab_extract
where aedat in S_DATE2 AND
BSART IN S_BSART.
select ebelp werks matnr *SELECT C*
into CORRESPONDING FIELDS OF TABLE itab_extract
from ekpo
FOR ALL ENTRIES IN itab_extract
where ebeln = itab_extract-ebeln.Hi Tom,
This SQL statement will be time consuming, Do not use a loop.
There are two options.
1. Select EKKO and EKPO details based on standard SAP view. (You can type EKKO in se11 view to find the correct view).
also use one range table populate r_aedat and s_date2 in the same. So you where condition will have r_newrange and
s_bsart. Also do not use into corresponding fields, it is not a good idea. It will increase your performance. Maintain the proper
sequence (Based on database structure of EKKO and EKPO)
2. If you are keen to use for all entries, then first select ekko then after your sy-subrc check get the data from EKPO.
Should be like this.
select ebeln bsart aedat lifnr from ekko into table gt_ekko where aedat in r_newrange and bsart in s_bsart.
if sy-subrc eq 0.
sort gt_ekko by ebeln ascending.
select ebeln ebelp werks matnr into table gt_ekpo for all entries in gt_ekko where ebeln eq gt_ekko-ebeln.
endif.
Hope it helps,
Best Regards,
Tapodipta Khan. -
Fill data in table( on view ) dynamically from internal table
Hi,
How can I populate a table on view with data from an internal table?
Thanks,
RonitaHi,
if you have an internal table named xyz.
Then create a structure in se11 for this internal table.
Then create a node with this structure with cardinality 0:n
Navigate into method WDDOMODIFYVIEW of view MAIN_VIEW. Insert coding for:
- Create a new context node for the table
Hint: Use method Create_nodeinfo_from_struct of class Cl_wd_dynamic_tool.
- Remove old dynamic table IE element from view , if one exists. If it exists, it is a child of group GROUP_1 and has the name TESTTAB.
- Create a new UI element for a table named TESTTAB
- Create an internal table, fill it with the data from the database table and bind it to the newly created dynamic context node.
METHOD wddomodifyview .
DATA:
UI Elements
group_1 TYPE REF TO cl_wd_uielement_container,
new_tab TYPE REF TO cl_wd_table,
Context Nodes
dyn_node TYPE REF TO if_wd_context_node,
tabname_node TYPE REF TO if_wd_context_node,
Node Info
rootnode_info TYPE REF TO if_wd_context_node_info,
Data Reference (for internal table)
stru_tab TYPE REF TO data,
String (for table name)
tablename TYPE string.
FIELD-SYMBOLS:
<tab> TYPE table.
create context node ***************************************************************
get node info of context root node
rootnode_info = wd_context->get_node_info( ).
Get the name of the table to be created
tabname_node = wd_context->get_child_node( name = 'TABLE_DATA' ).
tabname_node->get_attribute( EXPORTING name = 'NAME' IMPORTING value = tablename ).
translate tablename to upper case.
create sub node named TEST1 of structure (tablename)
cl_wd_dynamic_tool=>create_nodeinfo_from_struct(
parent_info = rootnode_info
node_name = tablename
structure_name = tablename
is_multiple = abap_true ).
get instance of new node
dyn_node = wd_context->get_child_node( name = tablename ).
remove "old" table UI element from view , if necessary ****************************
group_1 ?= view->get_element( 'GROUP_1' ).
group_1->remove_child( id = 'TESTTAB' ).
create new UI element table *******************************************************
new_tab = cl_wd_dynamic_tool=>create_table_from_node(
ui_parent = group_1
table_id = 'TESTTAB'
node = dyn_node ).
fill context node with data *******************************************************
create internal table of (tabletype)
CREATE DATA stru_tab TYPE TABLE OF (tablename).
ASSIGN stru_tab->* TO <tab>.
Get table content
SELECT * FROM (tablename) INTO CORRESPONDING FIELDS OF TABLE <tab>.
Bind internal table to context node.
dyn_node->bind_table( <tab> ).
ENDMETHOD.
Edited by: Sridevi D on Apr 19, 2008 10:30 AM -
How to delete a field from a Dynamically created internal table
Hi friends,
I have got a requirement in which, I will be entering the table name and Excel file from seletion-screen.
based on the Table I have entered in the selection-screen I need to create a dynamic internal table so that I can fill that Execel data into that internal table and later i using BDC i can I can fill the database table using SM30 transaction.
here. my problem is that, When I am creating internal table dynamically, MANDT filed is also getting created in the internal table.
please, help in deleteing the filed MANDT from the internal able.
following is the code which creates the dynamic internal table.
CREATE DATA dy_table TYPE TABLE OF (p_tabname).
assign dy_table->* to <dyn_table>.
please provide, if any sample code is available.
Regards,
Xavier.PHi,
You can use this logic,
While creating the Dynamic filed catalog try to avoid MANDT field.
Ex:
*Dynamic creation of a structure
CREATE DATA LP_STRUCT TYPE (V_TABLE).
ASSIGN LP_STRUCT->* TO <FS>.
*Fields Structure
OF_SDESCR ?= CL_ABAP_TYPEDESCR=>DESCRIBE_BY_DATA( <FS> ).
LOOP AT OF_SDESCR->COMPONENTS ASSIGNING <COMPONENTS>.
*Field MANDT not displayed
IF SY-TABIX = 1 AND <COMPONENTS>-NAME = 'MANDT'.
CONTINUE. " Next loop
ENDIF.
*Build Fieldcatalog
LS_LVC_CAT-FIELDNAME = <COMPONENTS>-NAME.
LS_LVC_CAT-REF_TABLE = V_TABLE.
APPEND LS_LVC_CAT TO LT_LVC_CAT.
CLEAR LS_LVC_CAT.
ENDLOOP.
Maybe you are looking for
-
Tecra A2: Cannot use the 1680x1050 resolution on external LCD monitor
Hi All, I need to make my Tecra A2 run at 1680x1050 at 60Hz for my new external VW222U LCD monitor which is connected to my port replicator. I know the card (which is 82852/82855) can run at this resolution as when using the Intel Embedded drivers it
-
Hello. I am trying to write a Java file which read a text file( contains id numbers and student names) and sort the information. I'd like to read the text file line by line and sort on alphabetic order based on names. How can I sort the information b
-
How can i get my sync key from mobile firefox (android)?
I logged in to the sync in my desktop browser and then set up syncing with firefox for android but i recently reset my firefox config and computer isn't connected. Because i lost my sync key i can't connect it again. If key can be retrieved on connec
-
ORA-16025: parameter LOG_ARCHIVE_DEST_2 contains repeated or conflicting at
Dear all, 10.2.0.2 on linux We are getting the below error in alert log and synchronization stopped ORA-00922: missing or invalid option Tue Oct 11 20:40:41 2011 PRMX: Alter session failed: ORA-02097: parameter cannot be modified because specified va
-
Solaris 10 - wireless card - configuration
Hi guys: I am new to Solaris... How would I configure a wireless card for use on my laptop? Thanks