Popup as a Search help

Hi ,
   I need to develop one popup. and this popup should be attached a search help to one of the inputfield.
   Actually i can go for freely programmed sh for this but i should use only popup to get the standard look and feel of window.
I have created a popup but dont know how to attach this popup as a search help for inputfield.
   Could anybody suggest me on this...?
Thanks & Regards
Sireesha.

When you create your component that you want to serve as a Search Help, be sure to add the Web Dynpro Interface IWD_VALUE_HELP. You must also implement the Method of the Component Controller - SET_VALUE_HELP_LISTENER (added by the above mentioned interface).
In the component where you want to use this search help - add a component usage (just like you would for an ALV) except for the above custom component you created to serve as a Search Help. Then for the properites of the context attribute that you want to attach the search help, Change the Input Help Mode to Freely Programmed. You will then get a new property called Input Help Component Usage. Simply choose the name of the component usage you just created.

Similar Messages

Call search help as seperately

Hello,
May I know if there is possible to call the popup window for search help directly, but not through the input field which uses the search help.Thank you very much!
Best regards,
Shumin

Hi Shumin,
*& Report ZTEST_SEARCHHELP_ITAB
*& This report is to populate F4 help for custom fields
REPORT ztest_searchhelp_itab.
       TYPES DECLARATION                                        *
TYPES: BEGIN OF ty_mara,
       matnr TYPE mara-matnr,
       mtart TYPE mara-mtart,
       END OF ty_mara.
       INTERNAL TABLE AND WORKAREA DECLARATION    *
DATA : it_mara TYPE TABLE OF ty_mara,
       wa_mara TYPE ty_mara.
     PARAMETERS DECLARATION                              *
PARAMETERS p_matnr TYPE ty_mara-matnr.
   SELECTION SCREEN FOR VALUE REQUEST         *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_matnr.
   SELECT QUIRES FOR CUSTOM FIELDS                *
SELECT matnr mtart FROM mara INTO TABLE it_mara UP TO 10 ROWS.
     FUNCTION MODULE TO POPULATE F4 HELP         *
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield    = 'MATNR'
      dynpprog    = sy-repid
      dynpnr      = sy-dynnr
      dynprofield = 'P_MATNR'
      value_org   = 'S'
    TABLES
      value_tab   = it_mara.
Here you will first fill the table ***it_mara** as per your requirements by the \
Select Query and then you will take the values for Search Help from the same table( it_mara).
Let me know if you have any doubts.
Edited by: AMIT BISHT on Sep 12, 2008 11:11 AM

Hiding Hit list popup and getting multiple values in Search help

Hi,
I have a special requirement where I am using a search help for filtering data. My requiremetn is the data which I am getting in Hit list popup, I want all that data in a internal table for further processing also I dont want that hit list popup. Is there any method or something which can be used in search help exit to hide the hit list popup dialog and returning all the records which is fetchec in the record_tab.
Thanks
Tanmaya
Edited by: Tanmaya31 on Dec 16, 2011 6:52 AM

Hi,
I dont think you can make thru search help. Instead, I can advise you:
Instead of using a search help for multiple selection, have a button placed at the table control, so that once you press that, you get the desired values(just as in SH) in an ALV display. Then you can make multiple selection and call the table control again and pass the values to the internal table used for the table control, so that the table is filled with the desired values.
Hope this helps you.
vamsi

Shoe View As A Popup When We Click On A Search Help

Hi Experts,
I am working on throwing a view as a popup when we press on the search help button for a column in my table.Could someone please tell me if this is possible and if we have an event that is triggered when we click the F4 symbol right next to the field .
With Regards,
Chaitanya.

Hello Chaitanya ,
You can use the freely programmed input help or OVS help .
For freely programmed input help , you have to create a webdynpro component ( Say ZWD_FREE_HELP )which will have the pop up view as a defaut view in the window WD_VALUE_HELP . In this wendynpro component you have to implement the interface IWD_VALUE_HELP .
You have also set the value help listner ( attribute VALUE_HELP_LISTENER in component controller of type IF_WD_VALUE_HELP_LISTENER ) inside the method SET_VALUE_HELP_LISTENER in this component ZWD_FREE_HELP .
Now you have to use this component in your Main component and provide the component name in for the attribute property freely programmed input help .
After closing the pop up window you have pass the data to main window . For this you have to implement the on_data_select event ( this event is the interface event at component controller ) of ZWD_FREE_HELP.
I hope this help you ....
regards
Vivek

F2 on search help popup

Hi,
I'm looking at product group Id field in the TPMOE/PRODUCTGROUPEOL. How can I get the technical details (component name view name etc..) on the search help popup that comes up when you do input help on this field. (Can't do F2 ??)
I need this information to trigger a popup(same product group popup) on the click of a custom button that I have in some other custom view (assignment block).
Thanks
Sreesanth

Hi Sreesanth,
This is not a normal F4 search help in which we re-use some other component. If you see the code in method GET_V_PGRP_ID, we are dynamically creating the F4 help by calling the constructor of class cl_crm_mktpl_vh_bol_proxy and passing the attribute-iv_fieldname = 'PGRP_ID'
Based on this attribute, the dynamic F4 help is generated. If you see in the code, also no outbound plug is called.This means we are not using any component usage over here.
Hope this clears some of your doubts.
Thanks and Regards,
Rohit

Search help is not working at Transaction Launcher

Hi gurus,
I create a transaction launch that calls a ZXXX t.code from same CRM system.
T.code ZXXX is used to execute a custom report in order to create document from excel file.
Everything is ok, but search help button is not working on web ui.
Search help will open "my computer" pop up. I guess this cause problem. Is there anyone who met this problem before?
Regards
Sadi

Hi,
Is the search help button part of custom report and is it working fine in GUI ?
What popup will come when we open that search help in GUI
Regards,
Shobhit

Search help for SKAT-SAKNR OR SKAT-SAKNR is not working

Hi All,
I have created a Search Help for F4 in a dialog program for SKAT-SAKNR OR SKAT-SAKNR. While i click F4 on that field, it displays blank values.
Here is the module:
module HELP_FOR_SAPGL_ACC input.
CLEAR t_SAPGL.
SELECT SAKNR TXT20
    FROM SKAT
    INTO CORRESPONDING FIELDS OF TABLE t_SAPGL UP TO 1000 ROWS
    WHERE SPRAS = SY-LANGU.
   WHERE L_GL_ACC = v_FIELD_VALUE-FIELDVALUE.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
    DDIC_STRUCTURE         = ' '
      RETFIELD               = 'SAKNR'
    PVALKEY                = ' '
     DYNPPROG               = PROGNAME
     DYNPNR                 = DYNNUM
     DYNPROFIELD            = 'SKA1-SKANR'
    STEPL                  = 0
    WINDOW_TITLE           =
    VALUE                  = ' '
     VALUE_ORG              = 'S'
    MULTIPLE_CHOICE        = ' '
    DISPLAY                = ' '
    CALLBACK_PROGRAM       = ' '
    CALLBACK_FORM          = ' '
    MARK_TAB               =
IMPORTING
    USER_RESET             =
    TABLES
      VALUE_TAB              = t_SAPGL
    FIELD_TAB              =
    RETURN_TAB             =
    DYNPFLD_MAPPING        =
EXCEPTIONS
    PARAMETER_ERROR        = 1
    NO_VALUES_FOUND        = 2
    OTHERS                 = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endmodule.
In the above code I am selecting 1000 rows from SKAT table and in the Search Help Popup it is also displaying 1000 rows but all are blank.
Please help me.
Regards,
Avaneet

Hi check my weblog on search help exit codeing..
https://wiki.sdn.sap.com/wiki/x/du0
\* Prepare for output
CALL FUNCTION 'F4UT_RESULTS_MAP'
TABLES
shlp_tab = shlp_tab
record_tab = record_tab
source_tab = lt_result
CHANGING
shlp = shlp
callcontrol = callcontrol
EXCEPTIONS
illegal_structure = 1
OTHERS = 2.
IF rc = 0.
callcontrol-step = 'DISP'.
ELSE.

Values from Search help not returned to UI

Hi,
For a field on Web UI, i have to open a popup which would be configured from a search help created in transaction SE11. The search help uses a Searchhelp Exit. On the UI, I am getting the popup but the value i select is not reflecting on the UI. The moment i select the value, the popup closes. The 'Get_XXX' method of the attribute also does not triggered. Following is the code which i am using to call the search help in the GET_V_XXX method of the attribute.
DATA:
ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.ZZSTORAGE_LOC'.
ls_map-f4_attr      = 'STORAGE_LOC'.
APPEND ls_map TO: lt_inmap, lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'ZOFI_SHLP_STORAGE_LOC2'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap.
I have tried various approaches suggested in the forum, but none could solve the issue. Please guide.
Thanks and Regards,
Radhika

Hi,
The client wants to use the search help method only. i am using the following code to call the serach help.
DATA:
ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
CLEAR ls_map.
ls_map-context_attr = 'EXT.ZZSTORAGE_LOC'.
CONDENSE ls_map-context_attr no-GAPS.
ls_map-f4_attr      = 'STORAGE_LOC'.
APPEND ls_map TO: lt_inmap, lt_outmap.
CLEAR ls_map.
ls_map-context_attr = 'EXT.ZZPLANT'.
CONDENSE ls_map-context_attr no-GAPS.
ls_map-f4_attr      = 'PLANT'.
APPEND ls_map TO: lt_inmap, lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'ZOFI_SHLP_STORAGE_LOC2'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap.
this code is written in the GET_V of the field ZZSTORAGE_LOC.The ZZ Storage_Loc field is getting saved but the field ZZPLANT does not. Please provide your inputs.
Thanks,
Radhika

Regarding Search help on selection-screen field

Hi there,
I am working on custom tables.
I have a requirement to maintain search pattern on a selection-screen field.
selection-screen parameter: p_name which is company name filed from Z table.
By giving a string like Holl* and by pressing F4 on the field p_name it has to popup a dialogbox having list of company names starting with Holl.
Thanks in advance.
-Tulasi

Hi
Go through the link given below :
How to create a search help for my own fields in selection screen
F4 search help on report selection screen
also try :
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
DDIC_STRUCTURE = ' '
RETFIELD = 'VKORG'
PVALKEY = ' '
DYNPPROG = SY-REPID
DYNPNR = SY-DYNNR
DYNPROFIELD = 'P_VKORG'
STEPL = 0
WINDOW_TITLE =
VALUE = ' '
VALUE_ORG = 'C'
TABLES
VALUE_TAB = T_TABLE1
FIELD_TAB = field_tab
RETURN_TAB = RET_TAB
DYNPFLD_MAPPING = DYN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3
With Regards
Nikunj shah

How to create Search help exit, and then assign it to a collective search

hi gurus,
i have an intersting question for you, well my scenario is like i have to create a search help exit using some function module cause i didt found table for my search help but i can find the value through FM, i know we can create a search help exit and then assign it to collective search help,
my problem is what are the parameters i need to pass to this search help exit FM, and in the function module i want to use the value entered on the f4 selection screen to extract data through FM. i need to give a solution asap.
any reply will be highly appreciated
n rewards points for sure.
thanks mandy

Hi mandy,
Have a look at this code,
FUNCTION SHLP_SHOW_LIST.
""Local interface:
*" IMPORTING
*"     VALUE(PLANT) TYPE WERKS_D OPTIONAL
*"     VALUE(DISPLAY_ONLY) TYPE FLAG OPTIONAL
*" EXPORTING
*"     REFERENCE(ITEM_SELECTED) TYPE CHAR20
*" EXCEPTIONS
*"      POPUP_CANCELED
TYPE-POOLS SHLP .
CONSTANTS:
        co_shlpname            TYPE shlpname   VALUE 'SHLP_CONTAINER',
        co_shlpfield_itemalias TYPE ddshlpsfld VALUE 'CONTAINER'.
DATA: l_shlp         TYPE shlp_descr_t,
        l_subrc        TYPE sysubrc,
        l_return_tab   TYPE STANDARD TABLE OF ddshretval,
        l_return_wa    TYPE ddshretval,
        l_interface_wa TYPE ddshiface.
Get details for search help
CLEAR l_shlp.
l_shlp-shlpname = co_shlpname.
l_shlp-shlptype = 'SH'.
CALL FUNCTION 'DD_SHLP_GET_HELPMETHOD'
       CHANGING
            shlp = l_shlp.
Assign virtual screen field
READ TABLE l_shlp-interface INTO l_interface_wa
WITH KEY shlpfield = co_shlpfield_itemalias.
l_interface_wa-value      = space.
l_interface_wa-valtabname = 'X2'.    "virtuel screen field
l_interface_wa-valfield   = 'Y2'.    "virtuel screen field
MODIFY l_shlp-interface FROM l_interface_wa INDEX sy-tabix.
Call F4 popup
CALL FUNCTION 'F4IF_START_VALUE_REQUEST'
       EXPORTING
            shlp          = l_shlp
            disponly      = display_only
       IMPORTING
            rc            = l_subrc
       TABLES
            return_values = l_return_tab
       EXCEPTIONS
            OTHERS        = 0.
IF sy-subrc = 0 AND l_subrc = 0.
Value selected
    READ TABLE l_return_tab INDEX 1 INTO l_return_wa.
    item_selected = l_return_wa-fieldval.
ELSE.
Popup canceled / no value selected
    RAISE popup_canceled.
ENDIF.
ENDFUNCTION.
make sure to call these FMs and populate accordingly...
Thanks
Madhu

How to call elem. Search help on Button click event in WD appilcation

Hello All,
i have requirement to call elem. search help on button click event in WD application. currently i am calling FM F4IF_START_VALUE_REQUEST but getting the short dump as below,
The following error text was processed in the system X31 : Screen output without connection to user.
The error occurred on the application server saps_X31_31 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
SYSTEM-EXIT of program SAPLSDH4
Function: F4_PRESEL_WITH_TABSTRIP of program SAPLSDH4
Form: F4PROZ_STEP_PRESEL of program SAPLSDSD
Function: DD_SHLP_SINGLE_STEP of program SAPLSDSD
Form: F4PROZ_LOOP of program SAPLSDSD
Form: F4PROZ of program SAPLSDSD
Function: F4IF_START_VALUE_REQUEST of program SAPLSDHI
Method: ONACTIONSEARCH_CUSTOMER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
Method: IF_WDR_VIEW_DELEGATE~WD_INVOKE_EVENT_HANDLER of program /1BCWDY/50TU5ZEXF3K0IWCWE153==CP
Method: INVOKE_EVENTHANDLER of program CL_WDR_DELEGATING_VIEW========CP
is there any way to achieve the required behaviour.
please let me know.
Regards,
Chandra

Hi Friends,
I have the similar kind of requirement. Upon click on a Button on screen i need to call a search help, and collect one or more selected material numbers.
The search help is working fine and i am getting the entries with the following code.
The problem is i am finding extra popup on screen.
CALL FUNCTION 'F4IF_FIELD_VALUE_REQUEST'
EXPORTING
tabname         = space
fieldname       = space
SEARCHHELP      = 'MAT1'
MULTIPLE_CHOICE = 'X'
STEPL           = 0
value           = 'MATNR'
*dynpprog        = progname
*dynpnr          = dynnum
*dynprofield     = 'CARRIER'
CALLBACK_PROGRAM          = 'ZTEST_1_PRA'
CALLBACK_FORM             = 'F4CALLBACK'
TABLES
RETURN_TAB                = RETURN_TAB
EXCEPTIONS
FIELD_NOT_FOUND           = 1
NO_HELP_FOR_FIELD         = 2
INCONSISTENT_HELP         = 3
NO_VALUES_FOUND           = 4
OTHERS                    = 5.

Value is not populating in field through search help f4

Hello Expert,
I have made one field as a search help but data is not populating from popup.
Data is coming from BP_search_help. Here i did not create any search help in se11. not required here.
i used Code in get_p method.
Method GET_P_BP_NUMBER.
CASE iv_property.
    WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
      IF iv_display_mode EQ abap_true.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_event_link.
      ELSE.
        rv_value = cl_bsp_dlc_view_descriptor=>field_type_input.
      ENDIF.
    WHEN if_bsp_wd_model_setter_getter=>fp_onclick.
      rv_value = ' '. "EC NOTEXT
ENDCASE.
ENDMETHOD.
GET_V Method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
        lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
        lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
ls_map-context_attr = 'STRUCT.BP_NUMBER'.
ls_map-f4_attr = 'PARTNER'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
        EXPORTING
          iv_help_id        = 'BP_HEAD_SEARCH'                            "#EC NOTEXT
          iv_help_id_kind = if_bsp_wd_valuehelp_f4descr=>help_id_kind_dtel
          iv_trigger_submit = 'X'
          iv_input_mapping = lt_inmap
          iv_output_mapping = lt_outmap
endmethod.
But when i activate get_v method .i am getting 1 error.
Error is
Please help me how to rectify this error and any other way to populate data in field through f4 help.
If u want more detail. Please follow attachment.

Hi Madhuri,
You can refer the below code for search help for partner. The code has to be written on GET_V_XXX method.
DATA: ls_map TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
         lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab.
   ls_map-context_attr = 'STRUCT.BP_NUMBER'.
   ls_map-f4_attr = 'PARTNER'.
   APPEND ls_map TO lt_outmap.
   CREATE OBJECT rv_valuehelp_descriptor TYPE cl_bsp_wd_valuehelp_f4descr
     EXPORTING
       iv_help_id        = 'UIF_BUPAP_WIDE_COL'    ""Search help name
       iv_help_id_kind   = if_bsp_wd_valuehelp_f4descr=>help_id_kind_comp
       iv_trigger_submit = abap_true
       iv_input_mapping = lt_inmap
       iv_output_mapping = lt_outmap.
Thanks,
Ritu

How to pass the default value to search help selection screen

Hi
I need to push a certain value as a default value based on a condition to the slection screen of search help in web UI.
Could you please let me know how can we do this?
When we try to open the 'F4' help in web ui then it should populate a certain value as a default value to the selection screen of this 'F4' help. We will get this default value based on condition.
Regards
Anil

Hi Arun
I'm using SE11 search help.I'm giving you my code for your reference here.
DATA:
    ls_map    TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping,
    lt_inmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
    lt_outmap TYPE if_bsp_wd_valuehelp_f4descr=>gtype_param_mapping_tab,
    lr_qs           TYPE REF TO cl_crm_bol_dquery_service,
    lr_current     TYPE REF TO if_bol_bo_property_access,
    lv_category    TYPE STRING.
ls_map-context_attr = 'struct.zzattr_i_1'.
ls_map-f4_attr      = 'ATTRIBUTE'.
APPEND ls_map TO: lt_inmap,lt_outmap.
CLEAR ls_map.
ls_map-context_attr = 'struct.zzattr_i_1'.
ls_map-f4_attr      = 'SERVICE_LINE'.
APPEND ls_map TO: lt_inmap.
CREATE OBJECT rv_valuehelp_descriptor
    TYPE
      cl_bsp_wd_valuehelp_f4descr
    EXPORTING
      iv_help_id                  = 'ZATTR1'
      iv_help_id_kind             = if_bsp_wd_valuehelp_f4descr=>help_id_kind_name
      iv_trigger_submit           = abap_true
      iv_input_mapping            = lt_inmap
      iv_output_mapping           = lt_outmap.
Here 'ZATTR1' is my search help name in SE11 and the field which is having 'F4' help is 'ATTRIBUTE'.
Now when I press 'F4' on 'ATTRIBUTE' then it will give a popup and this popup is having 3 fields..
1.'ATTRIBUTE'
2.'SERVICE_LINE'
3.Description of 'SERVICE_LINE' and hence by pressing 'F4' i should get a value in the field 'SERVICE_LINE' based on
   a condition.
However, if there is a value for ATTRIBUTE on the screen and when we press 'F4' on this then in the popup the value of
ATTRIBUTE which is there on the screen is appearing in the 'ATTRIBUTE' field and the same value is being copied to
'SERVICE_LINE' field in the popup.
Please guide me how do we populate the value to 'SERVICE_LINE' field inside the search help popup of 'ATTRIBUTE'.
Best Regards
Anil

Messages in Search help Pop Up

Hello Experts,
I have created a Elementary search help in Data dictionary and have used for Web UI Fields.
Now the search criteria is appearing as mentioned in elementary search help. I want to throw a error message if the user clicks on search without entering search criteria.
i tried to add message in global message container, but the message is not displaying on the popup, message gets added to Global message container but will be shown once the pop up closes. I need to show the error message on Search help pop up screen only.
Please suggest how to make these fields mandatory on search help.
BR,
Nikhil Kulkarni

Hi Nikhil Kulkarni
use method set_display_mode()
before open popup as :-
    lo_popup->set_display_mode( if_bsp_wd_popup=>c_display_mode_surrounded ).
    lo_popup->set_on_close_event( iv_view = me iv_event_name = 'SRPOPUPCLOSED').
    lo_popup->open( ).
it will work.
reagards, Harish Kumar

Issue in search help

Hi,
A search help which has search help exit is attached to a attribute in webdynpro.
In search help exit default values are populated.
When i click on F4, search help appears with default values coded in Fm exit. Selected one and added to personal list.
Now returned to main screen. Clicked on F4. Personalised popup displayed. Clicked on all entries(General value list). Now the defaulted values(coded in FM) are not appearing.
Could some one let me know whether any SAP note is available to fix this? I tried few. Not able to find it.
Steps to replicate.
1. Create a search help exit FM (by copying F4IF_SHLP_EXIT_EXAMPLE )
2. Write coding to default values of the screen in PRESEL method
3. Create a elementary search help and assign the created FM to it.Make this search help as Values with restriction.
4. Create webdynpro with an attribute and attach the above search help
5. Execute the webynpro. Click on F4 button. This will now show the defaulted value. Click on search and select one as personal list.
6. Close the window
7. Click on F4. Personalised search help popup will be displayed. Click on view all (General value list).
The default values wont be populated.
Regards,
GN

Did you check the screen field names & search help name? is it identical & unique?
Raja T

Popup as a Search help

Similar Messages

Maybe you are looking for