Popup Error - Won't Go Away

Recurring pop-up window on boot:
Popup Error
Failed to listen for incoming Popup jobs. You will not be able to use Popup printing for the duration of this session. Please report this incident to a system administrator.
How do I make this go away? I just upgraded my MacBook from Tiger to Leopard, everything else seems to work fine except for this strange error message. I haven't figured out what Popup printing is, don't really care. Just want this to go away.
Thanks...

I am having the same issue. Popup printing, I believe, involves printing over a network. For example, at school, I can print from my Mac to any access printer on the school's network through popup printing. It's a great feature, but isn't working because I'm getting this message error as well. I am making a list of all the problems I've had with Leopard since installing. I should be studying but instead I'm having to fix my Mac. Never thought I'd say that. Please, if anyone can help, I need my printer back.

Similar Messages

Help! Network error won't go away

I was setting up my Mac G4 running Tiger and was going to connect it to the network. I opened the Network Prefs and I get a drop-down error message that says "Your Network settings have been changed by another application."
This error message won't go away; if I click OK then the message just comes back. I have to force quit Network Preferences. There is no way to access network prefs while the error message appears. This message appears whether I'm connected (via ethernet) to the router or not.
I don't know what application could have changed my settings or how to change them back or how to make that error message go away. Any suggestions? Thanx.

Hi Ken,
To stop the pop-up, Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.
Try this cure for Security update...
http://discussions.apple.com/thread.jspa?threadID=1730909&tstart=0
The locations are actually...
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
/Library/Preferences/SystemConfiguration/com.apple.nat.plist

TS3274 My Ipad shows an icloud backup popup that won't go away

I have a popup that says to backup on icloud it won't go away when I press okay, won't shut down and I cannot perform any other operations on my ipad.

Try a reset:
Hold the Sleep and Home button down (approximately 10 seconds) until you see the Apple logo.
Note: Data will not be affected.

The iTunes Popup Screen Won't Go Away On My iPod. Help :c

There's an usb and the iTunes logo on my iPod and it won't go away. I've tried turning it off and back on but it still does it. Also, I've tried pluging it into my laptop and taking it out, as well as, "ejecting" manually on my iTunes window on my laptop, but nothing seems to work. Please Help Me Out. /:
I don't want to restore it...

The screen is telling you to restore the iPod via iTunes. You have to do that.

Spotlight problem: privacy list error won't go away

My Spotlight suddenly stopped being able to find anything. So I tried dragging the main disk's icon onto (and then off of) the Privacy tab of Spotlight, to ask it to re-index. But it gave me the Privacy Index error. So I went to Terminal and did sudo rm -rf /.Spotlight-V100, which succeeded, but: the privacy list error is still there, and oddly - the one thing that used to be in my privacy tab is still there! I thought that info was somewhere in the /.Spotlight-V100/... folder - how is it still there?!? What's a better way to wipe that info and ask Spolight to re-do everything?

I'm ruddy well frustrated
And we understand that. Most of us have been in similar situations. But troubleshooting a problem is hard enough in real life. When all we have to go on is words typed here, it's of the utmost importance to be painstakingly precise. In your case, it is very often the solution to reboot the iPod while it's plugged into the wall, and you had never stated clearly that you had done that. Go back and read your previous posts if you doubt it. If we are able to help each other, we have to know exactly what has happened, and even then it's not easy. And again, we are all just fellow users who come here voluntarily to help each other, so all getting mad at us does is make people not want to help you.
There are several things that might be going wrong, but one that I would test is your cable. Perhaps some of the wires inside have broken and that's why it's not realizing it is plugged into the wall outlet. Do you have a friend that you can borrow a cable from to test that out? (And to answer your question about the dock, it won't make any difference.)
12" PB, Mac Mini (x2), G3 iMac (x3), G4 iMac, G5 iMac, Centris 610, SE30, Mac+ Mac OS X (10.4.4) 3G iPod, iPod shuffle, iPod nano

Cannot verify server error won't go away

I can not get this error to go away. I tried restoring on pc but have windows 8 and it's not recognizing the ipad. Any other ideas?

Three things to try...
Using Windows Explorer navigate to C:\Program Files (x86)\Adobe\Reader 11.0\Reader, then double-click on Eula.exe and accept the license agreement
Can you open Adobe Reader by itself? If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
It could even be a malware issue; see http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

Safari popups that won't go away

I think that I accidentally clicked something I shouldn't have and now I had all these popups going on and I keep "okay"-ing them but they just keep popping up again and I don't know what to do. I've already restarted my computer, but every time I open the Safari app the webpages and the popup warning things keep coming back no matter how many times I try to click out of them. And the popups have number on them for me to call, but I don't think they're very reliable because they are giving two different numbers so I don't know which one would be legit enough for me to try I don't want to mess up any more than I already have

1. Click here and follow the instructions, or if there’s a type of adware not covered by them on the computer, these ones. If you're willing to use a tool to remove it(you don't need to, but may find it easier), you can instead run Adware Medic; this link is a direct download.
2. None of those numbers are legitimate. If you can’t simply dismiss those popups, choose Force Quit from the Apple menu, close Safari, and then launch it with the Shift key held down; if that doesn't work, temporarily disconnect the computer from the Internet.
(123729)

Registration Unsuccessful error won't go away

Registration Unsuccessful error message appears every time I open Adobe Acrobat 8 Standard. I recently loaded it onto new computer running Windows 8.1 and successfully registered it. I spoke to tech support and they confirm that it is registered on my new computer. I have tried all the options: submit again, register later and never register but it still comes up every time. Tech support did not know how to stop the message from appearing and suggested I ask the community. I tried the registry fix someone posted for Windows 7 but the path was not the same. I found the Adobe Viewer and changed it as recommended but it didn't work. Please don't recommend I purchase a newer copy of Acrobat - no money left after getting the new computer and A8 meets all my needs. Does anyone have any ideas?

Hi Jodiwer,
ThankYou for posting on the forums, Adobe Acrobat 8 is not compatible with windows 7 and above.
Thanks,
Vikrantt Singh

Ipod error won't go away

My ipod says "Firewire connections are not supported. To transfer songs, connect the USB cable provided. Press center to dismiss". When I press the centre the message just comes back on, and when I connect my USB cable my computer says that Windows does not recognize it. My Ipod will charge and update new songs, but it won't turn off.

Hi phishy75,
Have you tried resetting your iPod? To reset an iPod:
First, toggle your iPod's "Hold" switch back and forth a couple of times.
Then, press and hold the Menu and Select (center) buttons together for 5-10 seconds.
If that doesn't work, then try forcing your iPod into disk mode, by following the steps here:
Putting iPod into disk mode
With the iPod in disk mode, connect it to your computer, and try restoring it in iTunes.
If you don't have any success with that (or getting the iPod recognized in iTunes for a restore), then you may just need to let the iPod's battery run down.
-Kylene

Snapshot too old error won't go away ...

I am Oracle 10.2.0.3 on HP UNIX.
I have a 80GB database. I am doing full export with consistent=Y. I get following error towards the end of export:
. Exporting referential integrity constraints
. exporting stored procedures
. exporting operators
. exporting indextypes
. exporting bitmap, functional and extensible indexes
. exporting posttables actions
. exporting triggers
. exporting materialized views
. exporting snapshot logs
. exporting job queues
EXP-00008: ORACLE error 1555 encountered
ORA-01555: snapshot too old: rollback segment number 2 with name "_SYSSMU2$" too small
EXP-00000: Export terminated unsuccessfully
~
~
No other jobs are running or even users accessing the database at the time of export database. My undo table space size is now 6GB (I had started with 2GB and increasing it to 6GB) has not helped. Is there a way to consistently get rid of the error? I am assuming rest of my export is still valid.

What's the size of the UNDO tablespace? Just increase it
Kamran Agayev A. (10g OCP)
http://kamranagayev.wordpress.com
[Step by Step install Oracle on Linux and Automate the installation using Shell Script |http://kamranagayev.wordpress.com/2009/05/01/step-by-step-installing-oracle-database-10g-release-2-on-linux-centos-and-automate-the-installation-using-linux-shell-script/]

Backup Assistant Plus error won't go away.

Hello,
After Backup Assistant Plus was pushed to my phone i keep getting an application error:
Is there a way to disable Backup+ since i will probably never use it.
This is on a Samsung Stratosphere device.
Thanks,

Hi NickM219,
Application errors are no good! I know its important to have a properly working phone at all times. Let's get this resolved. If you are not going to use this great feature, you can remove it via MyVerizon http://bit.ly/xB4iTc . Sign in>Click " " sign next to I want to>Plan>Change features>Remove Backup assistant plus> save changes. The device will no longer prompt you to use this application, however the app icon will remain on the device. Keep me posted.
Thanks,
Pamelaf_vzw
Tweet us @vzwsupport

Registration PopUp Window Won't Go Away

I got no help with this calling support, and no help doing the 'Chat Live', so hopefully there's ppl here who might be able to help.
I have Photoshop CS2 v9 for Windows. It used to be on a Windows XP computer, but that computer died a few months ago. I now have a new computer with Windows 7 Ultimate, 64 bit.
I installed my Photoshop CS2 v9 on the new computer, and the registration window popped up. I click 'don't register' because I had already registered it on my old computer. But every time I opened PS, the Registration window opened. I finally just decided I would go ahead and go through the registration process again just to get rid of the window.
Now, every time I open PS, I am still getting the 'Register' window. I chatted with an online support person who referred me to tech support. I called tech support and they were no help either. Tech support said it's not an activate or re-activate situation because the software works fine.
The online chat guy said there was a file somewhere on the computer I could open in a text editor and change regisration to "never" and it would stop. But my computer has no such file.
Is there any way to make the window quit opening? The software is registered and needs no further activation, so what is the problem?
Thanks.

Hi Noel,
Thanks for the reply.
That did the trick - it's no longer popping up, thanks!
Now I just have to solve the "escape key disabled" issue, that I've been researching on the Adobe Forums.
(when PhotoShop CS2 is running, the escape key is disabled on all other programs. example: open notepad, choose "file / open" and then if you decide "I'm not going to need notepad after all" you can't hit escape to close the open file dialog - you have to click to close it)
http://forums.adobe.com/thread/372523 - but that's another topic
Regarding this topic, I appreciate the quick response that you have provided - it's been very useful.
David

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

My iPhone 4s acts like I need to plug in to iTunes and I got an error message saying it failed to download update and now the screen won't go away. USB port end on phone with arrow pointing to iTunes...

Now iTunes will not recognize my phone as a device...

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' it won't go away-'delete' is greyed out-can't access calendar! Help!

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

I upgraded to Mountain Lion (MacbookPro). Now when I open ical I get a popup window with a list I had added to Reminders app with the message 'Your calendar couldn't be refreshed' i--t won't go away-'delete' is greyed out--can't access calendar! Help!

DFS Error 9061 (Replicated folder offline for too long) won't go away

We have a server that got disconnected from a DFS replication group for too long. The error says to remove the server from the group and re-add it. I've done that about 6 times and I keep getting the error. I even tried deleting the replicated folder on
the server so it would copy from other servers but the error just won't go away. How can I get rid of it and get the folder replicating again?

Hi,
Based on your description, we can try to following the steps described in the section
Recovering DFSR from Content Protection in the following blog to troubleshoot the issue.
Implementing Content Freshness protection in DFSR
http://blogs.technet.com/b/askds/archive/2009/11/18/implementing-content-freshness-protection-in-dfsr.aspx
If the issue persists, please keep us posted.
Best regards,
Frank Shen

Popup Error - Won't Go Away

Similar Messages

Maybe you are looking for