Popup for transport request on save

Requirement
Popup for transport request on save and link an object to that TR in abap.
ANY fm
Please help me on this
Vijay

Hello Friend,
SE80, display function group STRD, there are many useful FMs: TRINT_CORR_INSERT,TRINT_INSERT_NEW_COMM,TRINT_POPUP_EDIT_CANCEL_O_SHOW...
Hope it helps.
Best Regards,
Jerry

Similar Messages

  • Popup for transport request in WebDynpro ABAP application

    Hi there,
    which function module can I use to prompt the user for the transport request in an WebDynpro ABAP application.
    In SAPGUI I found 'TR_ORDER_CHOICE_CORRECTION' to do this but I get a short dump when I call this one from a WebDynpro ABAP application ...
    Many thanks in advance!
    Regards,
    Steffen

    Thanks for your replay!
    The reason I get the short dump is the function modules I found call a dynpro screen inside for prompting for the request. I am not surprised this does not work for WebDynpro applications ....
    So I thought there is a generic function module for WebDynpro applications available or a WebDynpro component I can use for this ... Sure I could build it by myself but this does not seem to be the right way for me since this requirement seems to be of a generic nature.
    @Gaurav: I am interested to bring up a generic popup for prompting for the request. So I cannot use the flags to suppress the screen ...
    Best regards,
    Steffen

  • Asking for transport request whie table data updation

    Hi All,
    I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
    This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
    Please tell me as to what is the reason of asking for transport request.
    regards,
    Gaurav.

    Hi Gourav,
    If you go table maintanance generater of the table TCJ04 in SE11, you will find that Standard recording routine radio button is selected. That is the reason you are asked to provide transport request while updating data.

  • Asking for Transport Request while editing DTP in Quality - Client Open

    Hi Guru's,
    We have opened the client and trying to edit the DTP, but it is asking for transport request.
    Is there any other setting that we need to do in order not to prompt for transport request?
    Thanks & Regards.

    Hi Ganesh,
    One of the options would be to save it in a DUMMY request ,incase you do not want to transport such that you make changes next time it will by default get saved in that DUMMY request i.e it will not ask for a request next time.
    We usually save it in Dummy request,when we change a DTP in Quality or in Production.
    Rgds
    SVU123

  • Asking for transport request while table data updation

    Hi All,
    I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
    This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
    Please tell me as to what is the reason of asking for transport request.
    regards,
    Gaurav.

    Hi There,
    It is asking for the transport request for each new entry in the table since the Delivery class in the attributes is set to C( Customizing table, maintenance only by cust., not SAP import ), If it is set to "A" it will not ask for the transport request..
    Try creating a custom table and play around with the Delivery class, A and C, you will come to know the difference.
    Let me know if you need further help in this regard.
    don't 4get to rward pionts if found helpful.
    Thanks-

  • Error when creating files for transport request SAPK-700BGINPLMWUI

    Hello experts,
    We're upgrading our 46c System to ERP 6.0 EHP4.
    In Phase  EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
    We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems  O.K.
    Any help would be really appreciated!!!
    Complete Error message:
    EhP component PLMWUI, 700                                                                               
    Looking for SAINT package for 'PLMWUI' ...                                                                               
    R3upReadNewPackages:                                                                               
    patchType='U', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    ... No matching package found.                                                                               
    R3upReadNewPackages:                                                                               
    patchType='I', langVect='DEC'                                                                               
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "spda_read_new_packages" by RFC                                                                     
      ismovesVersion='0'                                                                               
    R3upReadNewPackages: exit: rc=0                                                                               
    Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'                                  
    ... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'                                                             
    (trc) R3upPatchDisassembleQueue: 1 package queue entries                                                                    
    (trc) R3upPatchDisassembleQueue: force=YES                                                                               
    (trc) R3upPatchDisassembleQueue: 1 packages will be disassembled                                                            
    Starting disassembling package queue                                                                               
    Date & Time: 20100319133139                                                                               
    Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"                                           
    RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"                                                 
    RFC Login succeeded                                                                               
    Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC                                                                     
    Input table IT_PATQ:                                                                               
    "SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"                                                       
    Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded                                                           
    Logging off from SAP system                                                                               
    Date & Time: 20100319133139                                                                               
    Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

    Hello Anthes,
    Please Check the things in following sequence :
    1.Use latest SAPehpi, R3trans and tp versions.
    2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
    Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
    3. Source file corruption can be ruled out by execution
    R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
    Note 2050
    4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
    5. Try to update the kernel if it not helps.
    Best Regards
    Niraj

  • Release strategy for Transport requests

    Hi,
    Can anybody give me the detail steps to configure release strategy for transporting requests?
    we are having Dev and Prd systems.
    Regards,
    Vinnu.

    Hello,
    I hope you have configured TMS for two system landscape.
    Just make the transport routes also, make DEV system as a Domain Controler.
    Then transport requests will automatically come in to the request queue.
    Using tx stms_import , import those request sequentially !!
    Note: Points always encourage me to reply !!

  • Command for Transport request

    Dear All,
    What is the command on OS level for transporting request of SAP.
    what are the others command which can be used at OS level for SAP activities apart from BRTOOLS.
    If you have any link please mail me.
    Please guide.
    Thanks

    HI,
    following command are used to import request.
    tp addtobuffer <request>.<sid>  If a change request is not in the buffer then this command is used to add it to the buffer, before the import step starts.
    tp import <change request> <sid>: To import a single request from the source system to target system.
    you need to provide the profile path with -pf = <profile_path> at end of command
    The following options are available for the R3trans program:
    R3trans -d : This command is used to check the database connection .
    R3trans -u <int>: Unconditional mode can be used as we have seen in the above example.
    R3trans -v : This is used for verbose mode. It writes additional details to the log file
    R3trans -i <file>: This command directly imports data from data file without a control file.
    R3trans -l <file>: This provides output of a table of contents to the log file.
    R3trans -n : This option provides a brief information about new features of R3trans.
    regards,
    kaushal

  • Transaction code to find return code for transport request

    Hi,
    I want to see  the return code for transport requests after importing to QAS from DEV. What is the transaction code to find return code and can you explain in brief.
    Thx,
    Vasu

    you can check it out in STMS
    wht you can do is ,,
    Run Tcode STMS > Overview imports (F5) > you will find all import queues > then click on the import queue in which u want to see the status of transport (DEV , QAS , PRD )
    > then find out the transport no > click on that > then click on logs or press ( ctrl + f4)
    Return code
    Meaning
    0000
    Transport performed without errors
    0004
    Warnings were issued. All objects were transported successfully. There were special actions for individual objects that may not have been intentional, for example, a warning is issued during the export if the request contains an object deletion.
    Read the warnings.
    0008
    Individual objects could not be transported successfully. You must analyze and correct the errors. Examples of import errors: Original object was not overwritten, Repaired object was not overwritten
    0012 or higher
    A critical error has occurred, probably not caused by the contents of the request. You must inform your system administrator.
    http://help.sap.com/saphelp_nw70/helpdata/en/57/38e26c4eb711d182bf0000e829fbfe/content.htm
    Hope this information will help you ,,
    Cheers
    dEE

  • Business object for transport request creation

    Hi,
      I want to know the business object for transport request creation. Kindly help.
    Thanks and regards,
    Venkat.

    I am not sure but u can try this BO CTREQUEST.

  • Regarding Client change for transport request

    In 46C system, How to change client for transport request?
    Before Upgrade, we have Trans Request-DEVK900002 for client XXX, and this client does not exists anymore. now How to delete this trans request or release it.
    one of the way i think is to change client for transport request and release it. Please share your suggestions.
    regards
    Jaichan

    Hi shlesa,
    Thanks for your reply.
    I tried now..it does not worked out.
    i created request at 000 using DDIC and then logged with 001 client using DDIC.
    then i executed SCC1, gave Source Client 000 and Request number and executed.
    i checked in SE09, was still the Request appeared with 000 client.
    Any other alternatives.
    Jaichan

  • What happens when counter for transport requests is exhausted ?

    Hi,
    Just a simple question: Do you know what happens if the counter for transport requests reaches it's limit ?
    Actually our development system has created E30K999205 as a last request/task. What will happen after E30K999999 ?? This will happen in two months...
    Regards,
    Joan

    Hi,
    Look at the below note .
    SAP Note:  106911.
    Thanks.

  • How to create "package name" for transport request

    Hi experts
    I am trying to create transport request for infopackage/data source/dtp etc...
    but system is asking package name in object directory entery.
    Could you pl. share the information step by step, how to create the "package name"
    Thanks in advance and you can get valuble points pl.
    Chandu

    Hi,
    Go to transaction SE21 and give the package name as ZAPO or any thing starts with Z.
    click on create button.
    give a short description
    in the Package properties block- allowed object types list box - select No restrictions.
    in the transport attributes block- specify the transport layer
    give software component as HOME
    select the check box for changes recorded.
    save the package.
    or
    Go to SE80
    select package from the list box
    give your package name and hit enter button
    the popup asks you for input.
    give the appropriate values and press create button.
    Note: You should be registered as a developer in the system where you are creating the package.
    Hope this solves your problem, Good luck
    Srini

  • Setting for transport request organizer

    Hi all,
    Can anybody tell me how to i get transport organizer every time when ever i will change the objects in sap bi.
    Regards
    Mohan

    Hi,
    There are two global settings done for transport management. Std and non-std settings. You can do this from Transport connection tool, Edit menu --> transport --> Standard on / Standard off.
    If Standard is ON: You would be asked to save in a request what ever you do in the system like creating objects, etc.
    If Standard is OFF: When you create objects, those would be, by default, stored as local objects. You will not be prompted to enter a transport number. You would need to collect objects from transport connection tool and move the objects to other environments. Once an object is assigned to a transportable package, whenever you do a change, you would now be prompted to enter a transport number eventhoug the std is off.
    Edited by: Murali Krishna K on Mar 7, 2011 3:08 PM

  • Table for transport request objects

    Hi,
    I need to copy the objects present in the transport request(Request/Modified) to any other transport request.
    Can any body tell me the table that stores the information regarding transport request.
    Pooja

    For your requirement you can do with menu bar options from the SE09 transaction,
    Don't go for suggested table level changes,
    Never in SAP system do any SAP table level change, you are invalidating your Service licence agreement in doing so. If any inconsistencies arise in production because of such recklessness then SAP will simply blame you. You can do as many changes in a Z table created by you but never in SAP tables.
    Hope you understand what I meant!
    --Naveen Inuganti

Maybe you are looking for