Popup in Va01 transaction
Hi Experts,
I want to call a pop-up message when i am saving a sale order in VA01 transaction.
Urgent..........
Rajneesh Gupta
Hello Rajneesh,
As mentioned, go to SE38 in the include MV45AFZZ, inside this go to the form USEREXIT_SAVE_DOCUMENT_PREPARE.
Using access key doesn't mean, you are changing standard code--the above itself is the user exit. Get the access key from ur BASIS consultant. This is normal, to code in any user exit one requires an access key.
I hope this helps.
Rgds,
Raghu.
Similar Messages
-
Introduction of pop up screen in va01 transaction
hello all,
my requirement when sales order is created with respect to quotation then if the delivery date is past then one popup message should be raised saying that delivery date is in past.
but my problem was there may be some background program which may trigger va01 transaction so at that time the popup message what i am going to introduce in the transaction should not come.
one more problem some batch input program may trigger va01 transaction then at that time also popup message should not trigger and some program will run in foreground also which will trigger va01 transaction at that time also popup message should not trigger.
can anybody tell me what condition we have to keep so that the popup message will not triiger for above 2 conditions
one condition is if any background program trigger va01 then we can check for sy-batch = 'X'.
Thanks in advance
srinivasHi...
To check if the program is running in Background
IF <b>sy-batch</b> = 'X'.
To check if the program is running in Batch input
IF <b>sy-binpt</b> = 'X'.
Hope this helps u.
<b>Reward if so.</b> -
Va01 transaction second screen
hi ,
in va01 second screen
sold-to-party fied
when i am presing F4 search help i am getting popup window
*in this popup window i need to add additional tabs how can i find that
specific field how to add this tabs to this popup window*
plzzz help me
it is an upgradetation from 4.7 to ECC6.0[Cross post|Reg: VA01 transaction second screen;
please don't crossposing.
Check my reply in your other post.
Amit. -
Credit Memo Request creation in VA01 transaction Code
Hi All,
Thank You very much in advance for reading this Query.
My Requirement is we have to create Credit memo Request in VA01 Transaction Code.But I tried to use the standard FM BAPI_SALESORDER_CREATEFROMDAT2 and It is throwing the Error "Unpermitted combination of Business Object BUS2032 and Sales doc.category K".
So can any one advise me the correct FM to satisfy this requirement.
Thanks and Regards,
K.Krishna Chaitanya.Hi
Try this....
Pass the below data to the fm: SD_SALESDOCUMENT_CREATE.
SALES_HEADER_IN:
DOC_TYPE
SALES_ORG
DISTR_CHAN
DIVISION
STATUS_BUFFER_REFRESH = 'X'
SALES_ITEMS_IN:
ITM_NUMBER
MATERIAL
TARGET_QTY
TARGET_QU
PURCH_NO_C
SALES_PARTNERS:
PARTN_ROLE
PARTN_NUMB
SALES_CONDITIONS:
ITM_NUMBER
COND_TYPE
COND_VALUE
CURRENCY
COND_UNIT
Hope this helps.... -
Problem in BDC for VA01 transaction TEXTS tab(Upgrading from 4.5b to ECC6)
Hi All,
I am working in upgrade project from 4.5b version to ECC6 version.
I am facing problem in TEXTS tab of VA01 transaction. In earlier version it is a table control containing of Language, Description & First line but, in ECC6 the screen is modified with texteditor, a list box for language key and a Text type at the left.
Now my problem is how to record this in BDC and how to read the text in the texteditor?
Thanks in Advance,
Ravi Kiran.Hi Seshagiri,
In this case i would suggest the use of BAPI if there's no compulsion to use BDC.
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
try using these for creation or change of orders instead of bdcs.
hope this helps and revert for more clarifications if any.
<b>Always reward points to useful suggestions.</b>
regards,
Vikas -
Pricing date and billing date in va01 transaction
Dear all,
step 1: we have sales order of order type IEL1 in our sap system
step 2: then we do have order type IELB which is called billing request . this is created in va01 transaction against IEL1 sales order type. now here billing document is created.
at the time creation of billing request (order type IELB) we get data flown in from sales order of type (IEL1).
now my requirement is that pricing date and billing date needs to be today's date and not the past date which was in sales order.
please help me in getting current date at the time billing request.
what is exit or modification i have to do.
if not clear please let me know.
thanks
krishnahi,
in va01 i create a sales order of type IEL1 and as well order type IELB.
now in our process we create sales order of type IEL1.
then we create billing request of type IELB with reference to order of type IEL1.
finally we create invoice in transaction code vf01 against order type IELB.
THIS is the process we are following.
thanks
krishna -
Condition type check in va01 transaction
Hi friends,
I have a requirment.
in va01 transaction , at the line item level iam entering a material number and order quantity and when i press enter i get the corresponding values for that particular line item.
now iam double clicking on that particluar line item(matnr) and clicking on the conditions tab.
there in the condtion type i will get what all the condition types are maintianed for that particular line item.
now my requirment is i need to add another concdtion type manully
say 'ZABC' and hit enter. the pricing for that particlular contion type 'ZABC' will be Determined.
Now can any one tell me in which internal table will i get all the condition type,
coz i need to do some additional check for the the manual entry'ZABC' (condition type ) which i have given .
which user exit should i use it.
remember i need user exit for condition type check but not for pricing bsaed on the contion type
Regards
Priyanka.Hi priyanka
If you want to Check then check in the KOMK and KOMP tables
As you want to go for user exit use any one of the user exits as per your requirement USEREXIT_PRICING_PREPARE_TKOMK or USEREXIT_PRICING_PREPARE_TKOMP
But can you tell what exactly you want to change and why you want to go for user exits
Regards
Srinath -
Condition records in va01 transaction
Hi friends,
I have a requirment.
in va01 transaction , at the line item level iam entering a material number and order quantity and when i press enter i get the corresponding values for that particular line item.
now iam double clicking on that particluar line item(matnr) and clicking on the conditions tab.
there in the condtion type i will get what all the condition types are maintianed for that particular line item.
now my requirment is i need to add another concdtion type manully
say 'ZABC' and hit enter. the pricing for that particlular contion type 'ZABC' will be Determined.
Now can any one tell me in which internal table will i get all the condition type,
coz i need to do some additional check for the the manual entry'ZABC' (condition type ) which i have given .
which user exit should i use it.
remember i need user exit for condition type check but not for pricing bsaed on the contion type
Regards
Priyanka.EDI1 EDI2 EDI3
CONTROL
DATA 1
cond class B B A
calculat type C C B
condition category J W W
i have tick the follwoing check boxes in CHANGES WHICH CAN BE MADE
amount/percent amount/percent amount/percent
item condtion item condtion item condtion
delete delete delete
calculate type -
Can we Subscreen 8460 instead of 8459 in the VA01 transaction 'Add. Data B'
Hi All,
Can we use Subscreen 8460 instead of 8459 in the VA01 transaction 'Additional Data B' tab.
Because....
Some developments are already done in 8459 Subscreen, and we do not want to disturb those developments in subscreen 8459.
Instead Can I use 8460 Subscreen, for new requirement.
Please advice.
Thanks,
Jaffer Ali.Sits all depends on your business requirement. ask your functional.
-
Hi All,
I need to validate VA01 transaction with the following things.
In the second screen of VA01after entering the feilds sold-to-party, Sold-to par and Purch.order no then press enter then the feild Incoterms will fill automatically. But what i required is if sold-to-party = 'aaa' , Sold-to par = 'bbb' and Purch.order no = '1234' then i need hardcode the incoterms = 'INC'. How it is posible? i found exit MV45AFZZ. so please advise what to do in this....if u have any code please update me.. and tell me how to debug that..Hi,
refer
want to find the screen exits in VA01 and VA02
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
45P0001 SD customer function for cross-company code sales
45S0001 Update sales document from configuration
45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
Hope this solves your purpose.
Award points if it helps.
-Gaurang -
Hi
When i try to save the sales order it is throwing an error ENTER ECC NUMBER in VA01 Transaction. How to clear that error
regards,
PradeepM.Dear
I think you have CIN implemented in your business process .So it is asking ECC number through J1D.Otherwsise , with out CIN , you have Customer Engineering Change Status NO in item over view : Customer number for the production series from which they release and receive materials. The customer sends this number in with a material number to request an engineering change to take effect as of a certain delivery date or cumulative quantity.
Regards
JH -
To make the "req.delivery date" field non-mandatory in VA01 Transaction
Hi All,
I want to make "req. delivery date"(RV45A-KETDAT) field non mandatory in VA01 transaction.
I have already checked on screen 4440 .This field is not mentioned as required field.
Please help me to find where can i make this field non-mandatory.
Thanks and Regards,
Dipali.Hi,
this is a required field, as far as the standard SAP code goes: everytime this field is touched the following function is executed in programme FV45EF0V_VBEP-EDATU_EINGEBEN:
call function 'PERIOD_AND_DATE_CONVERT_INPUT'
exporting
external_date = rv45a-etdat
external_period = rv45a-prgbz
importing
internal_date = vbep-edatu
internal_period = vbep-prgrs
ev_date_in_past = lv_date_in_past
ev_period_in_past = lv_period_in_past
exceptions
no_data = 1
period_invalid = 2
date_invalid = 3.
case sy-subrc.
when 1.
set cursor field 'RV45A-PRGBZ' line sy-stepl.
* Bitte Datum eingeben
message e394.
The only way to avoid this is create an implicit enhancement at the beginning of this form, copy the exisitng code in there, delete the message after WHEN 1. and put RETURN at the end of the enhancement. But this would be HIGHLY UNRECOMMENDED, because I am positive you cause a lot of misery later on in the process: this field is mandatory for a reason!
Roy -
Attach Search Help to INCO2 field in VA01 transaction
Hi Gurus,
in Va01 transaction , I need to attach a F4 help to INCO2 field .
Please let me know how and where should I call the search help.
Regards
Avihi
can you say how did you add search help for that field ?
thanks -
Enhancement for 6201 screen in SAPLV69A for VA01 transaction
hi experts,
i need to enhance the 6201 screen in SAPLV69A program for VA01 application,
is there any user exit for this particular screen.Hi,
Check all for VA01
Transaction Code - VA01 Create Sales Order
Exit Name Description
SDTRM001 Reschedule schedule lines without a new ATP check
V45A0001 Determine alternative materials for product selection
V45A0002 Predefine sold-to party in sales document
V45A0003 Collector for customer function modulpool MV45A
V45A0004 Copy packing proposal
V45E0001 Update the purchase order from the sales order
V45E0002 Data transfer in procurement elements (PRreq., assembly)
V45L0001 SD component supplier processing (customer enhancements)
V45P0001 SD customer function for cross-company code sales
V45S0001 Update sales document from configuration
V45S0003 MRP-relevance for incomplete configuration
V45S0004 Effectivity type in sales order
V45W0001 SD Service Management: Forward Contract Data to Item
V46H0001 SD Customer functions for resource-related billing
V60F0001 SD Billing plan (customer enhancement) diff. to billing plan
No of Exits: 15
Rewards if useful.............
Minal -
Making a warning message to Error in VA01 transaction
Hi All,
I have a requirement to change warning message to error while creating order with reference to a quotation using VA01 transaction .
Message : 'Reference document was only valid until &'
Message No: 009
Message Class: V2.
Right now standard SAP gives warning message and allows to create order eventhough the quotation is invalid but instead I want the system to give hard error and stop creating the order.
I have checked transaction OVAH and OVM1 but they are of no use.
If anyone has any ideas please let me know.
Thanks in advance.
Sonali.Hi Sonali,
1. In VOFM, Data Transfer -> Orders, copy routine 051 into new one (e.g. 901).
2. In this newly created routine add following statements along with the existing statements form 051.
IF cvbak-bnddt < sy-datum.
MESSAGE E247 WITH '051'.
ENDIF.
3. In transaction VTAA, choose target is S/O and source it Quotation. In Data Transfer routine at header level put 901.
This will stop creating S/O form Quotation which are expire.
Regards,
Mandar
Maybe you are looking for
-
Multiple Logical Table Sources vs Single Logical Table Source
OBIEE 11g. I am totally confused. Can someone help me with the following for me. I have seen logical table sources being used in 2 ways. I have a 2 sources tables: CUSTOMER & ADDRESS. In physical layer these 2 tables are linked by CUSTOMER _ID in a 1
-
Mock RFP for SUN network management tool, desperate 4 help, just need specs
OK, I have a project that in essence is a mock Request for Proposal (RFP), I play as an intern, & our instructor roleplays the manager we need to convince. The different network management tools that were available were for example; HP Openview, Cisc
-
Windows Event forwarding - What is a "Valid destination log"
Hi all, I'm currently setting up a centralization infrastructure for Windows events using the built-in event forwarding capabilities available in Windows Server 2008 R2. One of my requirements is to be able to create several subscriptions on the coll
-
firefox isn't showing navigation and settings buttons on gmail, making it hard to see where things are. The tooltips show up when rolled over with the mouse but all buttons don't show, just outline where they should be. Only site doing this. Already
-
Bad Issue playing Age of Empires III
Hi everyone, I have a Pre february 08 MBP which I recently upgraded to Leopard. The computer fits all the minimum and recommended system requirements for Age of Empires III. The game runs fine with the graphics maxed out, Until, I started to play the