Popup not populating the originating field with selected results
Customized setting browser.link.open_newwindow.restriction 0.
Popups from searchable fields open in new tab BUT they do not populate originating field with results.
"Diabetes" in search box get choices 250 2504 check choice Hit confirm and search box should have a number 250
Worked in FF3 not 8.
Tried that but not working.
It works fine if I default the newwindow.restriction to 2.
BUT I like the way the windows tab with 0 AND it used to work in FF3.
Tried to find safe mode, but FF9 not listed in my programs (FF3 was).
Similar Messages
-
"Diabetes" in search box get choices 250 2504 check choice Hit confirm and search box should have a number 250
Worked in FF3 not 8.Is that pref added by an extension?
What happens if you right-click and reset that pref?
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode
* http://kb.mozillazine.org/browser.link.open_newwindow
* http://kb.mozillazine.org/browser.link.open_newwindow.restriction (JavaScript window.open) -
Populated the new field with historic data
HI,
I have a data for 2 years now I am enhancing the data source how can I populated the new field with historic data.Is it by
1)deleting all the data in BW side and the doing an init then setting up a regular delta
2)running a repair full request with selection condition.
or is there any other option available? which is the best scenario to load these historic data?
Regards,
RaviHi,
I think your datasource is already in production, and you want to data only from today onwards for enhanced fields, i.e. historical data is not required for enhanced fields..
1.Fix ECC down time for 20 to 30 munities
2. Keep all objects on Qty system in ECC and BW.
3.Run Delta laods in BW for 2 to 3 times.So with this step you can clear SMQ1 and RSA7. Check the entries in RSA7, if it is ZERO then it is fine.
4. Move DS from ECC Qty to ECC PROD .
5. Replicate in BW.
6. Move all BW objects from BW Qty to BW Prod.
7. Delete Init load in InfoPackage level (Not in ODS/CUbe).
8.Load Init without DataTransfer.
9.Then Run Delta.
10. Next day on wards deltas will come as usual.
If you need Historical data also.
1.Delete data in Cube.
2.Fix Down Time and load Init then Delta.
Check
SAP Note 328181 - Changes to extraction structures inCustomizing Cockpit
Thanks
Reddy -
Search help is populating the input field with wrong data
Hi Guys,
I have created a ZCITY table for which has below 2 field
ZZCITY (Code ) (5 Char) u2013 Key field
ZZNAME (City Name ) (40 Character)
I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as VISIBLE and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
I created search help on table ZCITY with export parameters as ZZCITY and ZZNAME.
In SE11, I have mapped the export parameters with CI_CATSDB
Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
Please tell me how I can fix this problem.
Thanks in advance.
miniHi
Try selecting the Improting Check box aswell. if a screen field is hidden or display mode we can not use F4 help for that field.
you can also take the help of DYNP_READ_VALUES to get the selected value before PAI
Check whats happening in Debug.
Cheers
Ram -
In CAT2 - The search help populating the input field with wrong data
Hi Guys,
I have created a ZCITY table for which has below 2 field
ZZCITY (Code ) (5 Char) u2013 Key field
ZZNAME (City Name ) (40 Character)
I have added a custom field ZZCITY & ZZNAME in CI_CATSDB. Funtional guy has configured to make ZZNAME as VISIBLE and ZZCITY is HIDDEN on CAT2 screen in Data Entry area.
I created search help on table ZCITY with export parameters as ZZCITY and ZZNAME.
In SE11, I have mapped the export parameters with CI_CATSDB
Now in tcode CAT2, when I press F4 on City Name field, the list is displayed with City code and City names. And when I select any city code, the ZZNAME is populated by City code instead of City name.
I want that City Name should be populated in ZZNAME and City Code should be populated in hidden field ZZCITY.
Please tell me how I can fix this problem.
Thanks in advance.
miniHi,
Search helps have a one to one relationship with a screen field. To achive what you are trying to, I would have ZZCITY and ZZNAME side by side, and i would have a drop down only only ZZCITY. The key of the table will be ZZCITY. So when you chose the record, The city will populate in ZZCITY and you can make use of user exit EXIT_SAPLCATS_002 to populate the name automatically in the ZZNAME field.
thanks.
JB -
Reply to email populating the to: field with users own address!
Hello
I have one user who is having an issue with replying to emails.
When he replies, his own email address is automatically inserted into the To: field.
The user doesn't want to send himself a message each time while replying.
Is there a setting that the user may heve enabled, or any other advice on the isue would be appreciated.
Thanks
DIt's synced with Exchange, everythings working ok, just this little issue...
-
Selected file cannot be linked because its type (video) does not match the original file's type
I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR -
I want to sell off my old MacBook Pro and do not want any of my old stuff on it for the next person to fool around with. I'd like a clean-slate for the next guy/gal. It's a 17-inch that I purchased back in '07. It is currently running Snow Leopard after I installed it myself about two years ago. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
raeusebio32 wrote:
I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
No problem, stick in your 10.6.3 Snow Leopard retail disk you used to upgrade from 10.4/10.5 with
If you don't have this disk anymore, you can order one online at Apple.com for $29, they don't sell it in the physical stores.
http://store.apple.com/us/product/MC573Z/A
Reboot holding the c or option key down to boot from the disk, select Disk Utility from under the Utilities menu on the second screen (first is language selection)
Now select your boot drive on the left with the drive makers name and disk size and click Erase > Security Option > Zero All Data and click Erase
It will take some time to complete as it's making sure all your personal data if not easily recoverable off the drive using software.
Now quit and you will be back in the installer window, install 10.6 and it will reboot to the "Welcome Video" you can choose to press the power button down and do a hard shutdown, the computer will boot again to this video for the next owner.
If you need even more security in your data deletion efforts I suggest you read this
How do I securely delete data from the machine? -
CS5 The selected file cannot be linked because its type (audio) does not match the original file's t
Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
JeremyI had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck! -
I have one folder with several projects all of which Aperure can not find the original. I do not use referenced files. I can't make any adjustments like cropping etc. What can I do to adjust or print any of these photos? IO have no ther projects with this problem. My Aperture Library is automatically saved to two external drives.
Dick KoosI have one folder with several projects all of which Aperure can not find the original.
Have you checked inside your Aperture library, if the original files are still there?
Try to find out, when the images in those projects have been originally imported, then open the Aperture library by ctrl-clicking it and using the command "Show package contents" from the pop-up menu. In the window that will open, select the folder "Masters" and browse the contents. You need to find the subfolder with the year you imported the images, then the folders with the month and the day.
Are your original files still there?
If yes, copy them to a folder on your desktop for safe-keeping, and then try, if repairing the permissions and the other Furst Aid tools will help Aperture to connect to these missing files again - see this link: Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual
If the First Aid Tools don't help, then check, if Aperture has moved the missing images to a "recovered folder". If not, reimport the images, you saved to your Desktop and use the Lift&Stamp tool to transfer any adjustment and captions to your reimported images. -
Sir, the subject is, I do not know the original owner Will helped me know that the owner or on the way to end this problem, or any way to communicate with the person in question
This is a user to user forum. You are not addressing Apple. It appears that you may be having issues related to Activation lock: ( http://support.apple.com/kb/PH13695). If you cannot contact the original owner to have them remove activation lock, you should return the device for a refund.
HTH -
My I phone has plenty of storage but will not download any apps free or paid for when I press install the installation symbol appears briefly and then the page reverts to the original form with the price or free on the right hand side.
Call 1-800-275-2273...ask to talk to "Customer Relations"...no one else.
Good luck. -
Hi Guys, I copied my iPhoto library to a second external disk. Now my version of iPhoto (5.0.4) does not display the original library on the orignal external drive. I have reinstalled the iPhoto and it seems to make 2 attempts to find the library but fails. The iPhoto menu bar is available but does not function. The screen is blank. Any help appreciated,
GethinAre you indicating that you don't get this window when you hold down the Option key while launching iPhoto?
What do you mean by "nothing happens". What library opens when you launch iPhoto normally?
OT -
when I right-click a link to open in another tab, the new tab opens not in the original window but in the first Firefox window of the session.
I deleted sessionstore.js from the profile and restarted Firefox but that did not helpSounds like this bug:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=644729 bug 644729] - Popup window with all toolbars visible causes new tabs to open in another browser window
''(please do not comment in bug reports; you can vote instead)'' -
Innput field with Select option on custom screen
Hi,
I need to create an Input field with Select Option(No interval) button on Custom dialog screen .
Is there any idea how can I create it on screen ?
Thanks
Sachincreate a normal inputfield and place an icon next to it. then in the pai on click of that button use the following code.
data: wf_tab_field like rstabfield occurs 0 with header line ,
wf_exl_opt like rsoptions .
refresh: wf_tab_field .
move: 'KOSTL' to wf_tab_field-fieldname ,
'CSKS' to wf_tab_field-tablename .
append wf_tab_field .
clear wf_tab_field .
move: 'X' to wf_exl_opt-bt ,
'X' to wf_exl_opt-cp ,
'X' to wf_exl_opt-ge ,
'X' to wf_exl_opt-gt ,
'X' to wf_exl_opt-le ,
'X' to wf_exl_opt-lt ,
'X' to wf_exl_opt-nb ,
'X' to wf_exl_opt-np .
call function 'COMPLEX_SELECTIONS_DIALOG'
exporting
title = 'Select Cost Centers'
text = 'Cost Center'
* SIGNED = 'X'
* LOWER_CASE = ' '
* NO_INTERVAL_CHECK = ' '
* JUST_DISPLAY = ' '
* JUST_INCL = ' '
excluded_options = wf_exl_opt
* DESCRIPTION =
help_field = 'CSKS-KOSTL'
* SEARCH_HELP = 'KOST'
tab_and_field = wf_tab_field
tables
range = r_kostl
exceptions
no_range_tab = 1
cancelled = 2
internal_error = 3
invalid_fieldname = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
if not r_kostl[] is initial .
read table r_kostl index 1 .
if sy-subrc eq 0 .
move: r_kostl-low to wf_t_kostl .
endif .
endif .
wf_t_kostl is the screen field name.
Raja
Maybe you are looking for
-
My screen has gone and i need to back up pics, is there anyway way i can?
Please help! My phone broke 5 weeks ago, sent it of to b fixed and come back working etc. Was on the phone a few days ago and was hot so come off and now the screen is black and i cant see anything. When i plug it into my laptop to transfer all the p
-
HTTP Server is not currently supported with Solaris 10
I am having a problem to start the HTTP Server on Solaris 10 (I am installing HTTP Server as part of HTMLDB installation on Solaris 10). I had a problem to install it at first, however I've found on 'AskTom' that unsetting ORA_NLS33 helps and it did.
-
Seit dem letzten update kann ich itunes nicht mehr starten. Fehlermeldung: nicht gefunden MSVCR80.dll und error 7 (Windows 126)
-
CK11N User exit for valuation strategy sequence Price Purchase info records
Hi, When ck11n is executed for a particular material whose purchase order is created then only price from purchase info records is considered. As the sub strategy selected is purchase order price via condition table. Requirement: CK11N should conside
-
Including a web page in my jsf
Hi, I have a tabbed panel (I'm using myfaces' tomahawk) and I want to include in one tab the content of another web page. Is it possible ? Thank you.