Popup panel windows always appear in middle of monitor CS5

As of recently, all popup windows in Photoshop (i.e. colour picker, layer styles etc) appear in the middle of my monitor and cover the canvas i'm working on.
In the past, I would move this window over to the side and next time i open it, it would open in the last position.
This is no longer the case. Everytime it opens right in the center of the screen covering my artwork.
The same goes for layer styles. e.g. Stroke.
First the Layer Styles popup will cover my work.. i'll move it to one side
Then when I want to colour the stroke, the colour picker appears in the middle so I have to move this too.
I probably waste about an hour of my day just moving these popups out of the way.
The only thing I can think of is the fact that i've recently updated my graphics card driver (ATI Radeon HD 5700 Series)
In Catalyst Control Centre, I hav ticked the option to keep dialogue windows in the correct place but this doesn't apply to the in-application popups.
Help Please!

Win 7 64bit
Photoshop CS5 64bit
I've tried resetting the prefs but holding ctrl alt shift - no joy
I have no 3rd party plugs installed and havent installed any new fonts in a while.. long before the problem started.
Just tried turning off OpenGL and restarted PS and that fixed it!
So i guess the issue is with the graphics card driver. Maybe I should roll-back to an old version?
EDIT:
I'e now re-enabled OpenGL and restarted PS. Everything is working as normal now. Popups remember their last position and dont cover my artwork!
Thanks for the suggestion c.pfaffenbichler
Message was edited by: ajaykarwal

Similar Messages

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope

How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I open iPhoto and it will not move or go away. It stays on my screen (covering my desktop icons) even after I quit iPhoto. How can I get it off my screen?

Which version if iPhoto and MacOS X do you have?
Do you have any iPhoto plug-ins installed?
Open the folder /Library/Application Support/iPhoto/Plugins/
To navigate to that folder, open the folder "Library" directly on your Macintosh HD, then inside the Library folder go to Application Support, then iPhoto. Is there anything installed?

New windows always appear behind everything else

If I click a 'new message in mail' or anything similar in Leopard that creates a new window, it always puts it behind everything. Is there any way to fix this bug?

Master items always appear at the bottom of the stack.
Create a new layer and put the page numbers there.
Bob

Why the office windows always on top of others - how to change it back?!!

I'm using mac os x and office 2011.
Since maybe couple weeks ago (maybe after one of the office upgrades?), when I have multiple office windows opened (e.g., multiple word documents, excel, powerpoint), these windows always appear on top of others (e.g., safari, calendar) first!
Here is an example: now i'm using safari, so it's my active window. If I want to go to calendar (which is already opened), when I click the calendar window, all the office windows (which are opened as well) will jump out first!! Then I have to click the calendar again to make it become on top of the office windows. That means, whenever I want to switch to other windows while office windows are opened, I have to click all the other windows twice, because the first time I click on any other type of window, the office windows will jump out no matter what.
This is very annoying after a while. I'm not sure if I explained this clear enough. But how can I change the settings so the office windows can just not always on top of other windows??!!

Yes, I can view/hide the OSK with no problem but the keyboard, itself, changed somehow.

Is there a way to make labview messages always appear on top of all windows?

I have a main VI running and a user selects a non-Labview window to work on. Is there a way make the user prompt or user input express VI messages appear on top of all windows? I have experimented with the "make window always on top.vi" from the NI website. That brings the VI that is running to the top but not the prompt for the express VI message. I have also used the "make window always on top.vi" in a sub-VI and called that sub-VI to be always on top and it works. I was just wondering if there was a way to do it with the express VIs that NI already has written instead of making a custom message the way I have mentioned.
Thanks,
Troy

If you only need to display a prompt and can get by with a limited set of canned buttons (OK, Cancel, Retry, Continue, etc.), you can try a VI that calls the Windows API MessageBox function. You can display a message box with user-defined title, text and buttons. There is an option to use the system modality which is what you want in this case. I use my own version of this all the time for that very reason.
Message Box

How can I create a popup panel in a CVI DLL and keep it on top of the calling TestStand application window?

When I create a panel in CVI and use InstallPopup() to display it, the user can set the focus to the main TestStand window, which causes my popup to disappear underneath it.
I'm guessing I need the popup to be a child window of the main application window. I've tried passing the Engine.AppMainHWnd handle as the parentHandle argument in LoadPanelEx(), but this causes an error, as it is not a valid handle.
Also, if I call another DLL function from a control callback within my popup, which creates another popup, on closing the second popup both disappear and the program is stuck in the RunUserInterface() of the first popup.
This seems a simple requirement, yet I don't seem to be able to find a straightforward way to achieve it.

Steve,
I think this is more a TestStand question than a CVI question.
To use a CVI popup with TestStand, you should call TS_StartModalDialog() before InstallPopup().
When you quit your popup panel, you should call RemovePopup () and then TS_EndModalDialogAndDiscard().
The TSModalData must be the same for Start and End Modal dialog.
Bruno

Where did this backup window come from on my desktop. I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing. Where did it come from? Thanks for any help

where did this backup window come from on my desktop. It specifies personal data & settings and tells me when the next backup is scheduled [which I never set up]. I have always used time machine to backup to an external disc and within the last 2 weeks, this backup window keeps appearing. Where did it come from? Thanks for any help

To check your S.M.A.R.T status open disk utility and click on your drive and then click on the info icon.

Making pop-up image always appear within browser window

In my CS3 CSS site I want to have images which are only revealed when the user runs their mouse over a photo icon. I've worked out how to make the AP div, which contains the show-hide image, appear in the same position relative to the left margin of my text container div but can't seem to control where they are vertically. As they are absolutely positioned, I know that they will, in theory, always remain in the place where I have positioned them (although this appears to vary greatly from browser to browser) but this causes problems if, for example, I place them above the icon and the viewer happens to rollover the icon while it is near the top of their browser window - the photo can't be seen. Can I make the image's vertical position relative to the browser window, whatever its size, or make sure it always appears within the browser window?! I've tried setting margin top and bottom to auto but that doesn't seem to work in the same way that it does for margin right and left. An example is on this page http://www.ernestcooktrust.org.uk/Contact_biogs/biogs_trustees.html . At the moment the images are set to appear above the icon of the person they are referring to. Or is there a better way then show/hide AP divs to achieve this? Many thanks in advance for any (not too technical please) help.

Learn CSS positioning in 10 steps - with visual examples of Static, Relative, Absolute, Fixed, Floats
http://www.barelyfitz.com/screencast/html-training/css/positioning/
CSS Positioning explained
http://www.brainjar.com/css/positioning/
CSS Positioning tutorials - w3schools
http://www.w3schools.com/Css/css_positioning.asp
Why do APDivs move?
http://forums.adobe.com/message/2181263#2181263
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com

4EA1: Dual monitor - add constraint popup always appears on primary monitor

When editing a table and going to the constraints tab, and clicking the green plus sign to specify the type of constraint, it always appears on the primary display.
Environment:
Windows 7 x64
C:\Users\trent>java -version
java version "1.7.0_04"
Java(TM) SE Runtime Environment (build 1.7.0_04-b20)
Java HotSpot(TM) 64-Bit Server VM (build 23.0-b21, mixed mode)
http://oi39.tinypic.com/35klb0l.jpg

I have two monitors. The trick to moving something from the #1 Monitor to #2 monitor is to first
click that button between the X and the - up at the top right of your screen in the blue bar. Hover over it and it
says "Restore Down". This makes whatever you have on the screen less than full screen but
still visible.
Then you can grab it and move it over to the other screen. (Left click, hold, and drag) For some
reason, a full screen view won't move, but the smaller screen view does. Grab it and move it
horizontally to the other screen.
After you have it on the second screen in the smaller size, that Restore Down button becomes the
Maximize button. Click that and whatever you've moved will be full screen.
My set-up is a little different because my #1 screen is to my left and is the smaller screen just
because that's how my office is arranged. I do my primary work on my #2 screen which is the
larger screen. Programs open on #1 screen and I have to move them to #2 screen.

Can I move the in-focus panel to the "back", so that new windows/dialogs appear in front of it?

Hey,
I'm currently trying to implement this vi ( http://forums.ni.com/ni/board/message?board.id=170&thread.id=157121&view=by_date_ascending&page=1 ) into a folder selection sequence of my main GUI. The problem I am having, however, is that the dialog created by the .vi (which itself is just a call to an associated .dll) is showing up behind my GUI. If the user is attentive enough to notice the new window showing up in his taskbar and clicks on it to bring it to the front, then everything is fine. I'd prefer, though, that the dialog showed up in front of my GUI.
I can't seem to replicate this quickly in a simple .vi. It might be an issue of Vista [dev machine] versus XP [application machine], or built application versus IDE, or or or...
If there's a way to programmatically change windows focus, or "send current window to the back", that would probably solve the problem.
If not, I can try harder to replicate the issue in a simple VI and upload it.
Message Edited by AlexK on 01-29-2009 04:43 PM

As long as you make the calling vi front panel window the owner of the dialogue box, it should always stay in front of it's owning window until it is dismissed.
Message Edited by Troy K on 01-30-2009 11:10 AM
Troy
CLDEach snowflake in an avalanche pleads not guilty. - Stanislaw J. Lec
I haven't failed, I've found 10,000 ways that don't work - Thomas Edison
Beware of the man who won't be bothered with details. - William Feather
The greatest of faults is to be conscious of none. - Thomas Carlyle
Attachments:
dialog window refnum.PNG ‏6 KB

When use POP3 send and receive email, the outlook always popup a windows

Hello guys,
there is another question in Exchange 2013, when i tired to the send and receive email by using POP3, the outlook always popup a windows ,the error message is "ERR Logon Failure, Unknown user name or password ". I can fully confirm that the username
and password is correct.
The Exchange confguration as below,
POP3 : 995 SSL
SMTP : 587 TLS
I'm very appreciate for guys help.
Thanks
David
Exchange Lync Sharepoint

Hi,
How did you configure the POP3 account in the outlook?
Please refer to the following article to configure it:
Configuring POP3 Email in Microsoft Outlook Using a Secure Connection (SSL)
Thanks.
Niko Cheng
TechNet Community Support

HT1338 Mac Keeper popup window keeps appearing. Malware?

Mac Keeper popup window keeps appearing. Is it malware? No updates available for older computer (2005 Mac desktop)

I have no idea how they can get away with advertising MacKeeper at all.
You really really need to uninstall it if you did install it, but maybe not using their uninstaller.
Klaus1's great post on MacKeeper...
https://discussions.apple.com/docs/DOC-3027#comment-2156
More...
https://discussions.apple.com/message/15732233#15732233
https://discussions.apple.com/thread/2779849?start=0&tstart=0
http://applehelpwriter.com/2011/09/21/how-to-uninstall-mackeeper-malware/

When, on my home page, I click on the link "popup transparent" in the query, "Did you mean: popup transparent", NO RESULTS appear in that new tab; how fix?

I've been having trouble due, apparently, to a file named popuptransparent[dot]xul, of which I have 3 instances on my computer (running Win XP/Firefox latest v.). Using my AVG home-page window, I search for "popuptransparent" (to try to fix it) and the results appear OK. But then when I click, for a new tab, on the link "popup transparent" in the query, "Did you mean: popup transparent", NO RESULTS appear in that new tab. Further, when I then reload the AVG panel that searched for "popuptransparent" in the first place, it, too, now shows no results. Nor does a Google panel now show any results. They show the quantity of results but just white screens for the results themselves.
The links https://support.mozilla.org/en-US/questions/948804?esab=a&as=aaq and https://support.mozilla.org/en-US/questions/952141?esab=a&as=aaq don't help me. I have re-installed Firefox v. 20.0.1 to no avail. How to fix it?
Should I delete from my computer all 3 of those [dot]xul instances?

Thanks to jscher! With some help from AVG my AVG & Google browser panels now work OK. But I've taken the advice & disabled several extensions including the Disconnect. The browsers are still OK after re-launching them so I keep fingers crossed.
My original problem was that I had suddenly found a small popup window appearing, over the browser window, that I couldn't get rid of. It contained an advisory to the effect that Windows couldn't find the file popuptransparent[dot]xul. I tried searching for that to see what it was and in the course of doing that I seem to have executed it. Then was when the trouble started.
I have 3 instances of that file in my computer and would dearly like to get rid of them if they are of no use to me. Any advice there?

A small icon of 404 not found is always appearing on the lower right of my screen whenever I open firefox,whichever page I go,it's still there on the same place

I can go to whichever page I like,but the small message is always appearing.It is just a small paralilogram whith the message 404 not found and a strange server name.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Check the connection settings.
*Tools > Options > Advanced : Network : Connection > Settings
*https://support.mozilla.org/kb/Options+window+-+Advanced+panel
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if the "Use the system proxy settings" setting or one of the others doesn't work properly.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
See also:
*http://kb.mozillazine.org/Preferences_not_saved
*https://support.mozilla.org/kb/Preferences+are+not+saved

Infected, please help! "Warning! You have excessive popups. Windows may have been infected.

Hello. My computer has been incredibly slow and I have continuously been getting a pop up which states "Warning! You have excessive popups. Windows may have been infected. Please call 1-855-412-1786 for immediate support!" I have done some research and it seems like it is some type of trojan? I am a college student and really don't have the money to take my computer in, does anyone know how I can fix this? Thank you!

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Popup panel windows always appear in middle of monitor CS5

Similar Messages

Maybe you are looking for