Popup screen with two check box and a text area for the user to enter value

hi,
i have a requirement when a button is clicked a popup screen should appear with two check box and a text box where the user can enter a value.
is there any function module which has that functionality

Hello,
You can create a new screen and select the screen type as model dialog box.This will give you a pop-up screen and you can call this model dialog box screen in the PAI of the screen where the button is present.(At user-command).
case ok_code.
when 'BUTTON'.
call screen 200 starting at 10 10.
You can design the PBO of this pop-up screen as per your needs.
Regards,
Beejal
**Reward if this helps.

Similar Messages

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

I don't have original discs that it came with.
Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
If it has a slot-loading optical drive like this one:
things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions a

I am in the process of expanding a database of chemistry journal articles. These materials are ideally acquired in two formats when both are available-- PDF and HTML. To oversimplify, PDFs are for the user to read, and derivatives of the HTML versions are for the computer to read. Both formats are, of course, readily recognized and indexed by Spotlight. Journal articles have two essential components with regards to a database: the topical content of the article itself, and the cited references to other scientific literature. While a PDF merely lists these references, the HTML version has, in addition, links to the cited items. Each link URL contains the digital object identifier (doi) for the item it points to. A doi is a unique string that points to one and only one object, and can be quite useful if rendered in a manner that enables indexing by Spotlight. Embedded URL's are, of course, ignored by Spotlight. As a result, HTML-formatted articles must be processed so that URL's are openly displayed as readable text before Spotlight will recognize them. Conversion to DOC format using MS Word, followed by conversion to RTF using Text Edit accomplishes this, but is quite labor intensive.
In the last few months, I have added about 3,500 articles to this collection, which means that any procedure for rendering URL's must be automated and able to process large batches of documents with minimal user oversight. This procedure needs to generate a separate file for each HTML document processed. Trials using Automator's "Get Specified Finder Items" and "Get Selected Finder Items", as well as "Ask For Finder Items" (along with "Get URLs From Web Pages") give unsatisfactory results. When provided with multiple input documents, these three commands generate output in which the URLs from multiple input items are merged into a single block, which yields a single file using "Create New Word Document" as the subsequent step. A one-to-one, input file to output file result can be obtained by processing one file at a time, but this requires manual selection of each item and one-at-a-time processing. What I need is a command that accepts multiple input documents, but processes them one at a time, generating a separate output for each file processed. Is there a way for Automator to do this?

Hi,
With the project all done, i'm preparing for the presentation. Managed to get my hands on a HD beamer for the night (Epason TW2000) and planning to do the presentation in HD.
That of course managed to bring up some problems. I posted a thread which i'll repost here . Sorry for the repost, i normally do not intend to do this, but since this thread is actually about the same thing, i'd like to ask the same question to you. The end version is in AfterEffects, but that actually doesn't alter the question. It's about export:
"I want to export my AE project of approx 30 min containing several HD files to a Blu Ray disc. The end goal is to project the video in HD quality using the Epson EMP-TW2000 projector. This projector is HD compatible.
To project the video I need to connect the beamer to a computer capable of playing a heavy HD file (1), OR burn the project to a BRD (2) and play it using a BRplayer.
I prefer option 2, so my question is: which would be the preferred export preset?
Project specs:
                    - 1920x1080 sq pix (16:9)
                    - 25 fps
                    - my imported video files (Prem.Pro sequences) are also 25 fps and are Progressive (!)
To export to a BRD compatible format, do i not encounter a big problem: my projectfiles are 25 fps and progressive, and I believe that the only Bluray preset dispaying 1920x1080 with 25 fps requests an INTERLACED video (I viewed the presets found on this forum, this thread)... There is also a Progr. format, BUT then you need 30 fps (29,...).
So, is there one dimension that can be changed without changing the content of the video, and if yes which one (either the interlacing or the fps).
I'm not very familiar with the whole Blu-ray thing, I hope that someone can help me out."
Please give it a look.
Thanks,
Jef

HT4061 Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please

Sir i have lost my apple iphone and i do not remember IMEI number of the iphone and the sticker affiexed on the box is also not present (lost) but i have the bar code 602-7484-A printed on the box and police is asking for the IMEI number so please help

The IMEI number is stored in iTunes:
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
I can't imagine that any police agency in the world would request this information.

HT202663 I have Mountain Lion 10.8.4 and want to find how congested are channels 1 - 13. Seems to be easy with 10.8.3 and earlier but cant for the life of me find it in 10.8.4. Can anyone help?

I have mountain lion 10.8.4 and want to find how congested are channels 1-13 on my router. How do I do this please?

I'd suggest you get WiFi Explorer from the Mac App Store. For only $3.99 I find it well worth the cost for the ease of use and better info in relation to the built-in tools.
Regards.
Disclaimer: any product suggestion and link given is strictly for reference and represents my opinion only. No warranties express or implied. I get no personal benefit from the sale of any product I may recommend in any of my posts in the Communities. Your mileage may vary. Void where prohibited. You must be this tall to ride. Objects in mirror may be closer than they appear. Preservatives added to improve freshness. Contestants have been briefed on some questions before the show. No animals were harmed in the making of this post.

On every page I get a box with a 2 and an OK button, the page behind it is grayed out and nothing works until OK is hit. I also get a box that says Suppress more alert dialogs from this page? With a check box and the OK button.

Hoping to get this to go away!This just started today, I have run all my virus/malware, etc with no luck. Uninstalled and reinstalled Firefox as well. Any help and or suggestions would be appreciated as this is highly annoying!

This issue can be caused by an extension that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

I have an apple tv but lost the controller I connected my apple tv to my internet with an ethernet cable and it worked fine for the past week it has now stopped working

id also like to mention that before it stopped giving me the option to use airplay on my iphone, i had disconnected my apple tv because it was in the sun while i was watching it, and a message popped up saying "temperature: your apple tv is over heating. this message will dissapear when your apple tv is ready,"

Take it in to Apple

HT4623 Tried updating to IOS 7. Now my phone is stuck on a white screen with two dots and two dashes.

Tried updating my iPhone 4S with IOS 7. It is now frozen on a white screen with two black dots and two black dashes. It will flip to another screen once in a while that says "Slide to setup." But when I do, it goes back to the screen with the dots and dashes.

What happened with your phone? I'm experiencing the same problems at the moment.

I have a split screen with two site. All the suggestions are not working.

Everytime I load Firefox, I get a split screen with two sites on it.
I have tried the resetting of home page and clicking off the icon to not show the site selection page.
I have facebook on the left and it cannot be expanded bigger than a panel. I have a 3/4 screen of what ever web site I wanted to load.
How do I turn this off?
Nothing is working and I cannot imagine how it happened.

Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.
Opening in the sidebar is the default for bookmarks that are created via a link or button on a website. 
You can check the Properties of a bookmark via the right-click context menu in the sidebar (Ctrl+B; Cmd+B on Mac). 
In the Bookmarks Manager (Bookmarks > Show All Bookmarks) you can click the More button in the Details pane at the bottom right. 
Make sure that "Load this bookmark in the sidebar" is not selected.

Is there a way to expand the text area of the login/lock screen for the warning message?

I put our company's standard warning message in the Security & Privacy system preference ("Show a message when the screen is locked.") and it overflowed the allotted text area for the warning message text on the login screen and lock screens. It seems that the area allows about 250 character messages and I need to provide about 500 characters. Is there any way to expand the text area allotted for this purpose?
Bob Reed

To be a little more specific about the challenge I'm facing, I want to increase the allotted text space for the field I've outlined in the attached image. Seems like there ought to be a NIB file that could be edited to accomplish this task:
I would appreciate any advice on which file should be edited to expand the text field.
Bob Reed

ALV with check boxs and buttons

Hi guys,
It's been a while since last time I used ALV and its options.
I have a requirement to show many records in ALV format. each record starts with a check box, user can choose which record by checking each and click on a button to merge them (those record contain text). Everything should show up on ALV screen. Any idea what how should I do that??
I think I should use screen painter but I have no idea how to implement that...
Thanks,

Hi Ben,
Here is the code as per ur requirement ..
just go through this....i hope u will get some help...
REPORT zashu_alv_in_popup_mara.
TYPE-POOLS : slis.
*Data Declaration
DATA:i_repid LIKE sy-repid.
 i_repid = sy-repid.
Declaration for ALV
DATA: wa_fcat TYPE slis_fieldcat_alv,
 fcat TYPE slis_t_fieldcat_alv,
 wa_fcat1 TYPE slis_fieldcat_alv,
 fcat1 TYPE slis_t_fieldcat_alv.
*Types Declaration
TYPES:BEGIN OF ty_mat,
 matnr TYPE mara-matnr,
 checkbox(1),
 END OF ty_mat.
TYPES:BEGIN OF ty_makt,
 matnr TYPE mara-matnr,
 maktg TYPE makt-maktg,
 maktx TYPE makt-maktx,
 END OF ty_makt.
*Internal table Declaration
DATA:it_mat TYPE TABLE OF ty_mat WITH HEADER LINE.
DATA:it_makt TYPE TABLE OF ty_makt WITH HEADER LINE.
*Range Declaration
RANGES : r_matnr FOR mara-matnr.
*Start of Selecdtion
START-OF-SELECTION.
PERFORM get_data.
PERFORM display_data.
PERFORM display_alv.
 Form get_data
FORM get_data.
Read material from MARA
SELECT matnr FROM mara INTO TABLE it_mat.
ENDFORM. " GET_DATA
 Form display_data
FORM display_data.
wa_fcat-row_pos = '1'.
wa_fcat-col_pos = '1'.
wa_fcat-fieldname = 'CHECKBOX'.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-seltext_m = 'SELECT'.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
wa_fcat-row_pos = '1'.
wa_fcat-col_pos = '2'.
wa_fcat-fieldname = 'MATNR'.
wa_fcat-tabname = 'IT_MAT'.
wa_fcat-seltext_m = 'MATERIAL'.
wa_fcat-outputlen = 50.
APPEND wa_fcat TO fcat.
Display data in a POPUP
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
 EXPORTING
 i_selection = 'X'
 i_zebra = 'X'
 it_fieldcat = fcat
 i_tabname = 'IT_MAT'
 i_checkbox_fieldname = 'CHECKBOX'
 TABLES
 t_outtab = it_mat.
IF NOT it_mat[] IS INITIAL.
LOOP AT it_mat WHERE checkbox = 'X'.
 r_matnr-sign = 'I'.
 r_matnr-option = 'EQ'.
 r_matnr-low = it_mat-matnr.
 r_matnr-high = ' ' .
 APPEND r_matnr.
 CLEAR r_matnr.
 ENDLOOP.
 ENDIF.
select matnr maktx maktg from makt into table it_makt where matnr in
r_matnr.
ENDFORM. " DISPLAY_DATA
*& Form DISPLAY_ALV
 text
--> p1 text
<-- p2 text
FORM display_alv .
*ALV Display in a POPUP window
wa_fcat1-row_pos = '1'.
wa_fcat1-col_pos = '1'.
wa_fcat1-fieldname = 'MATNR'.
wa_fcat1-tabname = 'IT_MAKT'.
wa_fcat1-seltext_m = 'Material No'.
APPEND wa_fcat1 TO fcat1.
CLEAR wa_fcat.
wa_fcat1-row_pos = '1'.
wa_fcat1-col_pos = '2'.
wa_fcat1-fieldname = 'MAKTX'.
wa_fcat1-tabname = 'IT_MAKT'.
wa_fcat1-seltext_m = 'DESCRIPTION'.
APPEND wa_fcat1 TO fcat1.
wa_fcat1-row_pos = '1'.
wa_fcat1-col_pos = '3'.
wa_fcat1-fieldname = 'MAKTG'.
wa_fcat1-tabname = 'IT_MAKT'.
wa_fcat1-seltext_m = 'GROUP'.
APPEND wa_fcat1 TO fcat1.
CLEAR wa_fcat1.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = i_repid
 i_grid_title = 'Material Description'
 it_fieldcat = fcat1
I_SCREEN_START_COLUMN = 30
I_SCREEN_START_LINE = 10
I_SCREEN_END_COLUMN = 70
I_SCREEN_END_LINE = 30
 TABLES
 t_outtab = it_makt
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " DISPLAY_ALV
Thanks & Regards
Ashu SIngh

Problem getting check boxes and radio button to click with applescript

This is my script, it runs through without error, i can see the check box lightly flash like its being focused in on, but it wont actually check mark the box. it does this with all my check boxes and radio buttons.
tell application "Adobe InDesign CS3"
activate
end tell
tell application "System Events"
tell process "InDesign"
tell menu bar 1
click menu bar item 12
key code 125
key code 125
key code 124
key code 125
key code 125
key code 36
delay 1
end tell
tell window "Variable Links"
click checkbox "Use InDesign Tags Filter"
end tell
end tell
end tell

Hi craneium and welcome
For me this script fails, going through it step by step it seems confused, as I have highlighted out in the below code.
where is the window "Variable Links, may be I can help.
tell application "Adobe InDesign CS3"
activate
end tell
tell application "System Events"
tell process "InDesign"
tell menu bar 1
click menu bar item 12 --opens spotlight search in help
key code 125 -- highlights indesign help
key code 125 -- highlights welcome screen
key code 124 -- goes to apple
key code 125 -- goes to about this computer
key code 125 -- highlights software update
key code 36 -- starts software update
delay 1 -- ?
end tell
tell window "Variable Links" -- error cant get window variable links
click checkbox "Use InDesign Tags Filter"
end tell
end tell
end tell
Budgie

Magic Mouse question. I have set this in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me only to the dashboard and

It's a Magic Mouse question. I have set this up in Preferences by ticking Swipe between pages with one finger and also Swipe between full-screen apps with two fingers, however when I try to do the latter, the 2 finger swipe will take me from the app that I am on to the dashboard only and not to my other open apps.
I also find that Smart zoom only works with some apps, for instance not with Word docs or email.
How can I correct this please?

Just figured out it also does not work with the Mail app.

Hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.help?

hi.have a g5 mac,dual core 2.3 unit.i bought it with no hard drive.have got hard drive,formatted for mac.i am trying to load osx.i get a grey screen with a small box in the centre with 2 character faces,and then grey apple with loading icon spinning.nothing is loading tho.

I see 10.6.3 in your profile---is tthat what you are trying to load? If so, it won't work. No PowerPC Mac like your G5 can run a Mac OS version higher than 10.5.8

When you first download Pages, there is a welcome screen with a check mark, in a box, at the bottom left corner that says show this window when Pages opens. How do I recheck that box?

When you first download Pages, there is a welcome screen with a check mark, in a box, at the bottom left corner that says show this window when Pages opens. How do I recheck that box?

Alex,
Go to Pages Help, Welcome to Pages.
Jerry

Popup screen with two check box and a text area for the user to enter value

Similar Messages

Maybe you are looking for