Popup variable entry with dropdown
Hello,
I have a web template (WAD in 2004s) and I need that when the template was executed the popup for variable entry values appears as a dropdown box instead of the tipical selection popup.
I have found a how to (How tou2026Use a dropdown box to set variable values 3.x) but I need that the dropdown appears from the beguiner of execution for introduce the values of filters.
Thanks.
Isabel Bautista.
Hello Isabel ,
Modify your web template with the dropdown box you want.
You can drag the drop down web element into the web report. Assign a appropriate infoprovider for this drop down and select the characteristics you want for drop down.
If you want to filter the results with the selection of dropdown value, then choose appropriate command for this dropdown to filter the result.
Regards,
Pratap Sone
Similar Messages
-
Forcing Variable Entry with Web Application Designer Bookmark
Hello All,
We have users that are creating bookmarks in a Web Application report. They want to change their dates every time they open the bookmark, but the variable entry screen is not showing up even with the "Force Variable Entry Screen" option checked. Is this how a bookmark is suppossed to funciton or is there anyway to make the variable entry screen appeear with a saved bookmark.
***the purpose of the bookmark is for users to save the format of the report as they see fit
Any help would be appreciated!!
Thanks!
Tina
Edited by: Tina Gatto on Jun 3, 2009 4:10 PMwhen you save yorru personalization, you dont save it to internet explorer favourites. its a different code to save personilization.
try these posts they might help
SAP Business Explorer (SAP BEx)
SAP Business Explorer (SAP BEx)
search sdn for
how to "personalize".
hope this helps -
How to link the variable entry with the planning function execution
Hi All,
I am new to IP , we have a requirement where the user enters the value 2008 for a variable year. Then we are supposed to copy the same combinations for the next four years against which the user will be able to input the key figure values. But i have only 2008 data in the cube, so i need to generate new records for the same characteristic combinations as present for 2008 for the next four years. I am planning to use a copy function for this but how can i trigger this planning function once the user enters the value for the year variable. I want the planning function to get executed once the user clicks OK after the variable entry. Request your valuable inputs on the same.Hi Tilak,
for this u have an option of executing the planning sequence when the web template loads ie. after the variable screen.
open the WAD.
go to the properties of Web Template web item. Under the section standard action of the webtemplate, we have a n option to include planning functions under action before rendering.
If u include your planning sequence in this this will get executed every time the layout loads.
guess this is usefull to u.
Regards.
Shafi. -
Issue with Variable Entry in BI 7.0
Hi,
I am having an issue with the variable entry in BI 7.0 Version. Here is a brief background.
--- In BW 3.x, when we define a variable with <b>Single Value Option</b>, you can enter the value manually in the pop-up selection screen or select from the dropdown of possible values.
---But in 7.0 when i try to enter the value manually in the selection screen its opening the dropdown list, and is not giving me the option to enter a value manually. I am entering a valid single value in selection.
Is this a bug or do i have to make any specific settings to correct my issue?When the selection screen pops up choose the KEY only function on the TOOLS on the top right corner of the screen. Then you will be able to enter the values manually.
Hope this helps. -
Problem with Variable Entry Screen
Hello All,
We upgraded our development systems to NW2004s and came across the following issue:
All our Bex queries have restricted time characteristics with variables entries. When we execute a query it should pop-up the variable selection screen for us to enter the restriction values but the query is ignoring Variable restriction screen and taking into consideration everything. The same query works fine in Prod., which is still in 3.1.
Did anyone come across this situation kind of situation? It did not pop-up any type of error and we are in SPS10
Thanks in Advance,
Message was edited by:
bw expert online
Message was edited by:
bw expert onlineWe fixed the "Variable Screen not appearing" problem by adding following objects to our users.
1) Business Explorer - BEx Web Templates (NW 7.0+) S_RS_BTMP
2) Business Explorer - Individual Tools S_RS_TOOLS
3) Business Explorer - Data Access Services S_RS_DAS
Mark the message answered if this helps. -
Recurring entries with variable amounts
Hi ,
How can we handle recurring entries with different amounts regularly. As an e.g. of this scenario "Telephone bills/electricity bills are paid every month and we need to automate the same but their amounts would be different ".
I believe recurring entries could do only for same amounts, so I doubt if this can be used. Account determination template - my guess is how flexible it could be? Do we have any other approach to handle this?
ThanksIf you have variable amounts every month, it is easier to use sample document, not recurring entries.
-
History of user Input values in variable entry screen
Hi Experts,
I have a small issue. I have a variable entry screen where I select values from the list. I can always see the history of variable values I input earlier when I click on the dropdown box. For example the country code displays all my previous inputs.
Similar to the web browsers history.
Not the same case with Fiscal Year/Period. I do the same type of selection from the combo box for example 12.2006. I give different values again like 1.2007, 2.2007 etc and run the report several times. But it doesn't show up the history of my previous entries unlike the country code.
Kindly help, points assured.
Thanks,
Raj.What we've done isn't pretty, and I'm hoping for a better solution.
We've developed 3 ODSs that we've exported a full list of all attributes and their values to. Each ODS is identical.
We've then created an InfoSet to link the Product Cube to each of the 3 ODSs. We can then add 3 variables to the query representing each ODSs. Since the ODS holds over half a million attributes, we limited it to 3 since it takes 30 minutes to run.
It's not elegant, it's not pretty, and I'm sure it's not optimal. I'm hoping someone can describe a better solution. -
2 queries sharing 1 variable entry screen
We have 2 queries in a workbook which use identical user-entered variants. Is there a way to have the user only fill in the variants once for both queries.
Thanks,
RonHi,
Yes. you can. Bex will bring the popup for variable entry for the Query which is last inserted.
Some say-> your have insert Query1 and then Query2.
The the popup for Query2 with appear first and user make a variant there and save it. Now i am assuming that you have make sure that you are using the same variables for both query..then there will be no popup and the whatever values which user have entered in variant of Query2 which will taken by Query2 also.
Fews points to keep in mind->
1) Make sure that you are using the same variables (check techinal names of variables) in Query 2 as you have in Query 1.
2) To refresh all queries with a single refresh screen, the user can select any cell in the workbook that is NOT part of the query (to visualize which cells are part of a query, use the Analyzer toolbar and select Layout >> Mark queries on worksheet), then select the refresh button. You will see a message box that says "No query is selected. Do you want to refresh all queries in the workbook?". If you select Yes, all queries will refresh with one refresh screen (assuming all queries have identical variables).
Regards,
San! -
Question on WAD's "Variable Entry" screen values
Hi,
I've one Web Template Report contains "Variable Entry" screen.
It has one entry for Plant.
Also inside a report I'm having one DropDownList that is for Plant only.
My Requirement is:
If I enter some "1000" as a input in Plant at Variable screen, that same "1000" should be passed inside the report. And that corresponding DropDownList should show the "1000" as the selected value.
Now I'm getting "Show all values" as the default selected item.
Kindly suggest to achive this requirement.
Full points will be given.
Thanks
-Jay JayHi,
1)If i didn't give any value in Variable Entry screen, in the result DropDownList shows "No data" in disabled mode.
Ans. Since you have not checked "Display All Values", i think if you dont give any selection in the Variable Screen, the DropDown box will not be highlighted.
2)The Selected plant Not only having Name and id, But also having all characteristics like, 1402,Pen,Business Partner: xxxxx, Distribution channel:xxx, etc.,
Ans. Since we are reading from the Master Data, i think all these values will also be displayed.
I still dont know if you are using WAD 3.5 or 7 ? Maybe we have better options in 7. You can try with different properties.
Hope it helps. -
Hi Experts,
we are using portal 7.3 version,Our requirement is addition
of a new field “Leave Details” in the LTA screen with dropdown values from Infotype
2001 subtype ITEL. From the current calendar year in ESS.The new field should
be available only for the claim type LTA claim or claim against advance.
please find the below screen shot and details.
Current View
Component: HRESS_CLMS_WD_EMCR
Personalization: 4370750342A6297CC184E2B07FE6D13E
Window: W_CLM_DYN_UI
View: V_CLMS_DETAIL
Application Component: PY-XX-RS
Kindly help me how to add this field and in which method can i implement code.
Thank you in advance
Regards,
VanithaHi Shankar Reddy,
Business requirement is the new field should display the list entry in Infotype 2001 for the calendar year as selection option for employee. they would like to know ITEL subtype claim,
Example.employee no: EE#9941
As per screen shot you may see for EE#9941 there are 2 Leave requests.
So in the leave details the selection drop down menu option or any other way should be display 2 lines.
Regards,
Vanitha -
Variable entry issue when the query is executed on the WEB
Hi,
When I execute a 2004S query on the WEB,In the variable entry screen , even if I specify for example 'A' for a variable , the 'A' is completly ignored and it returns all the values.So there is a problem with '*'.
If I execute the same query in the Analyser, '*' is considered while returning the results.
Anyone having similar issue.
Thanks in advance.Hi siva,
Its a program error. Please apply the advanced correction from SAP note <a href="https://service.sap.com/sap/support/notes/1062214">1062214</a>
Assign points if helpful,
Regards, Uday -
Code 91 - Caused Error: (Object variable or With block variable not set)
Hi,
We are using FDM 9.3.1. We have enabled batch processing.
We are having following process being followed
- Batch Loader script will pull the data from dwh table for each entity, scenario, year and period
- Batch processing is set to serial and processlevel set to Up-To-Check
- We had following five files created for Location - EMAFF100
i. 1_EMAFF100_ACT_May-2011_RR.txt
ii. 1_EMAFF100_ACT_Jun-2011_RR.txt
iii. 1_EMAFF100_ACT_Jul-2011_RR.txt
iv. 1_EMAFF100_ACT_Aug-2011_RR.txt
v. 1_EMAFF100_ACT_Sep-2011_RR.txt
Batch loader process completed the processing for May - 2011, Jul - 2011, Aug-2011, Sep-2011.
But for Jun 2011 it has given the following error in the 'tbatchinformation' table and failed at import stage.
40751.6239236111 1_EMAFF100_ACT_JUN-2011_RR.TXT 2 2 91-Object variable or With block variable not set
When we checked the view error log from tool menu we found following
** Begin FDM Runtime Error Log Entry [2011-07-27-14:58:29] **
ERROR:
Code......................................... 91
Description.................................. File [1_EMAFF100_ACT_Jun-2011_RR.txt] Caused Error: (Object variable or With block variable not set)
Procedure.................................... clsBatchLoader.mFileCollectionProcess
Component.................................... upsWBatchLoaderDM
Version...................................... 931
Thread....................................... 5600
IDENTIFICATION:
User......................................... ncreighton
Computer Name................................ HYAPSDEV1
App Name..................................... EMATTEST
Client App................................... WebClient
CONNECTION:
Provider..................................... ORAOLEDB.ORACLE
Data Server..................................
Database Name................................ hydev_serv
Trusted Connect.............................. False
Connect Status.. Connection Open
GLOBALS:
Location..................................... EMAFF100
Location ID.................................. 762
Location Seg................................. 16
Category..................................... ACT
Category ID.................................. 13
Period....................................... Jun - 2011
Period ID.................................... 30/06/2011
POV Local.................................... False
Language..................................... 1033
User Level................................... 1
All Partitions............................... False
Is Auditor................................... False
We then re submitted data for Jun period and saw batch process got successfully completed and June data got imported successfully and also rest other processes got through.
Can any one provide exact cause for this error? As we have automated the data load from DWH to FDM And then to HFM. Hence when such error comes it disturbs lot of processing there on. Appreciate your early response.
Thanks in advance.Hi SAP collegues,
At my site, BPC Excel created this problem too "Object Variable or With Block Variable not set" .
It turned out that this is symptom of a a dys-functioning BPC COM Plug-in in XL2007 or XL2010!
This is a consequence that your Excel recently crashed while using BPC. And it relates to an Excel Add-in becoming disabled when the applications crashes. Please check the following.
Note before doing the following, close all other open Excel and BPC sessions.
Within Excel go to File à Options
Select the Add-Ins option on the left
Select the <<COM Add-ins >> option in the Manage drop down, and click Go
Make sure that the Planning and Consolidation option is selected. If not, mark this box and click OK.
If you do not see anything listed, return to the Add-in screen and select the Disabled Items option, and see if Planning and Consolidation is listed there.
Let me know if you have any queries,
Kind Regards,
robert ten bosch -
Batch Processing error: Object variable or With block variable not set - 91
We are experiencing the following error when trying to execute the FDM Batch Processing of files in our UAT environment. This error is not occuring in our DEV environment. I have seen this error before when the data file had been left open and FDM could not access the file, so it appears this error is usually due to file permissions. However, this time none of the files are open, and as far as we can see, FDM should have full access to the OpenBatch and Inbox folders etc.
Does anyone please have any suggestions, particularly on what account FDM will carry out the various tasks? Would it use a system account?
Error:
"Object variable or With block variable not set - 91"
FDM Log:
** Begin FDM Runtime Error Log Entry [2012-07-06 16:07:09] **
ERROR:
Code............................................. 75
Description...................................... Path/File access error
Procedure........................................ clsBatchLoad.fFileCollectionCreate
Component........................................ upsWBatchLoaderDM
Version.......................................... 1112
Thread........................................... 5828
IDENTIFICATION:
User............................................. admin
Computer Name.................................... *******
App Name......................................... *******
Client App....................................... WorkBench
CONNECTION:
Provider......................................... ORAOLEDB.ORACLE
Data Server......................................
Database Name.................................... *******
Trusted Connect.................................. False
Connect Status.. Connection Open
GLOBALS:
Location......................................... *******
Location ID...................................... 748
Location Seg..................................... 2
Category......................................... *******
Category ID...................................... 14
Period........................................... *******
Period ID........................................ 02/07/2011
POV Local........................................ False
Language......................................... 1033
User Level....................................... 1
All Partitions................................... True
Is Auditor....................................... FalseI can confirm that there is definitely data present in our data files in this case.
Please note that this error only occurs when using the Batch Processing functionality of FDM Workbench (which requires files to be placed in the OpenBatch subfolder of the Inbox). I can load individual files fine when using the FDM Web Client.
As part of the first step of the batch load process, FDM Workbench moves files from the OpenBatch folder to a new folder which it creates in the Inbox\Batches directory. However, it is not even managing to do this, and gives the error below.
We have tried to share the OpenBatch folder, to allow specific users access to drop files into this folder. Consequently, I believe suggests a security problem on the OpenBatch folder itself (please see original post). I have been told privileges should be sufficient for FDM to make use of this folder too, however I suspect this is not the case at present.
In the meantime, please let me know if this could be due to other causes. -
Variable entry screen for query doesnt show selection values.
Hi,
I've created a query with date varibale Quarter From-To. When i execute this query, the variable entry screen pops up but when i try to select values just shows ??? and not the text.
if i run the same query in RSRT the variable entry screen pops up but here the selection values are present for me to choose from.
can anyone tell why the values arent showing when the query is executed.
Thanksyes, it seems to be a problem with NetWeaver BI BEx Java Web runtime as it works in RSRT and web analyzer. Found a note on marketplace note 125357 - No values displayed for attributes in input help but this did not resolve issue.
A call has been raised now as it seems to be a product fault -
Variable entry screen from BW in webdynpro
Hi all,
can I use the variable entry screen for a BEx query to access all the user inputted values in a webdynpro application.
I want to launch this screen from within the webdynpro application, and once the user presses "Execute", I want all the user selections back in the application.
Is this possible at all?
Thanks,
Satyajit.Hi Satyajit,
Since the variable entry screen orignates from the BI system in conjunction with a web template it cannot be invoked separately. Do you plan to run the web application within a Web Dynpro application (i.e. an iFrame)? One option would be to use the BI Java SDK to populate the values in a user selection screen and then use the user's selection to execute a query or MDX statement. Of course you Web Dynpro app is responsible for rendering the result set.
Regards,
Oliver
Maybe you are looking for
-
Error with butwise xor in update statement
Hi What is the corresponding of ^(xor) in oracle .The below is the mysql scripte UPDATE fvmaptsqnug SET FTQQZNUGFVMPRSG = FTQQZNUGFVMPRSG ^ 1 WHERE EIJTQQVWPRSKHF = 1 AND EWJUSGFTTKVF = 1; So can anyone help me in converting the above script to oracl
-
Monitoring Transmit and Receive Error
We have an monitoring system to monitor all the access points transmit and receive errors. There are four column name "Receive Error", "Receive Discard", "Transmit Error" and "Transmit Discards". I have notice that there are a lot of transmit discard
-
How to find a Transport Request no for Task or Workflow Template
Hi All, Any body tell me. How to find a Transport Request No for Task or Workflow Template. Thanks, Lakhshmi.
-
Hi Experts, I checked in sm 37, 2 jobs are realesed today at 4:00 pm on my name but as per my requirment i dont want to run any chain today, we have lot of process chains so how can i find out which process chain i scheduled? is there any way? Help
-
Handle text using list box in dialog program
hi, I am working on dialog program , Created two fileds , one is list box type I/O field and another is i/O field which displays text based on value selected in list box. Please provide any inf how to Handle text using list bo