Popups appear under other buttons

I can't figure out why my popups (using rollover Buttons - Show/Hide buttons function) are appearing behind other text/buttons on the page that are on lower layers. I'm using CS5. In the screenshot, the teal box should be appearing over the content on the lower right (Temperature, etc.). For some reason, the dotted line stays in the back! Thanks!

Thanks, Bob, I see that is the case. Do you know of any way to order the interactive elements and therefore solve my problem? Or is the only answer to adjust my design so there is no overlap?

Similar Messages

I have Adobe Reader X version 10.1.12, the "Done Signing" button does not appear under "I Need to Sign" How to fix?

I have Adobe Reader X version 10.1.12, the "Done Signing" button does not appear under "I Need to Sign" How to fix? Or how to tell AR that I'm done signing?

... one possibility/answer you will find there: Re: Sign option is missing from my Adobe Reader X (10.1.3)

Error when clicking other button after displaying Popup window

Hi,
I'm developing a custom page which calls a popup window in r12, below is the error encountered.
Error: Cannot Display Page
You cannot complete this task because you accessed this page using the browser's navigation buttons (the browser Back button, for example).
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
On my base page, I have other buttons like Save, Back, and the button to invoke the popup window. I can display the popup window without error, but when i clicked on the base page's other buttons after invoking the popup window, the error above is shown. I'm not clicking any browser's navigation buttons. Please let me know how to solve this error.
Thanks!

Hi,
Just want to update...
The error occurred because I have isBackNavigationFired checking, this becomes true when clicking the other buttons in the base page after displaying the popup. Is there a workaround where I can make this work without removing my back browser navigation checking?
Thanks!

I tried to download from the app store. It will not download. It shows up under "other purchases" but the action button is blank. I have tried to re-download it and it won't let me do that either. Any suggestions?

Mavericks will not download from the app store. It shows up under "other purchases" but the action button is grey and will not allow me to install, uninstall or redownload. I meet the system requirements but nothing is working. Any help would be appreciated!

There is nothing wrong with my iTunes, is more of the App store that I am concerned about. And I've tried the "Authorise this computer" yes it does download when using iTunes, but no luck with App Store. And, yes I am logged onto iTunes when doing purchases.
I find this really fustrating because the App store works fine on my ipod but once it comes to my macbook, it does not download. A few seconds later after I click on an app to download, the pop up message notifies me that the purchase cannot be downloaded.
Anyways, thanks for your suggestion.

Can there HOME BUTTON(the circular button under the screen)or any other button on the front of the phone flash an LED light on notifications

pls reply and if it is 'no' then pls advice the apple company to do this in the next iPhone.

Can the HOME BUTTON(the circular button under the screen) or any other button on the front of the phone flash an LED light on notifications

Bug: Podcasts with the same episode titles as others appear under the wrong podcast

Example: On Sep 26, 2012, an episode of You Made It Weird with Pete Holmes was released titled "Chris Hardwick". Another podcast I subscribe to called Making It with Riki Lindhome has also had an episdoe titled "Chris Hardwick" before on Dec 21, 2011. In the Podcasts app, the Sep 26, 2012 "Chris Hardwick" episode appears under Making It with Riki Lindhome, yet when played it is You Made it Weird with Pete Holmes.
I have provided in-app screenshots below:

See One cover, too many tracks.
tt2

IMAP folders appear under Inbox

I am using Mail.app with 6 imap accounts. For two of the accounts (both on cyrus-imapd servers, I believe), all of the folders appear as subfolders of that accounts Inbox. I am able to successfully assign the Junk, Trash, Sent, etc. folders. Every unassaigned folder, however, appears under Inbox. If I place "INBOX" (without quotes) as my IMAP Path Prefix, as instructed by my ISP (one I host), I cannot connect to any of the subfolders (and they remain under "Inbox").
For both accounts, I can also use a webmail server, where every folder does appear under INBOX.
As of a couple months ago, Mail had always worked perfectly for me. For some unknown reason, when starting Mail one day, I had to reset many of my prefereneces. From that point on, I have had this above problem with two of my accounts.
Any help would be greatly appreciated.
1GHz PowerBook G4 Mac OS X (10.4.8)

These being IMAP accounts, you may try re-creating them, i.e. deleting them in Preferences > Accounts and setting them up again from scratch. INBOX should definitely be in the IMAP Path Prefix. You may try bypassing the Account Setup “Assistant” by holding the Option (Alt) key down when clicking on the [+] button, so that Mail doesn’t attempt to connect to the server until the account has been completely configured.
Before deleting the accounts, you may want to make a backup copy of the ~/Library/Mail folder, just in case. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example (quit Mail first).

How can I re-set the App Store so the Updates will again appear under the Updates tab?

Hi,
I am running a Macbook Pro (retina). Lately when I launch App Store and click on Updates the software updates for the software on the Macbook do not show up under the Updates tab. However, when I go to the Purchased tab I see there Update buttons next to programs that have updates ready to download.
How can I re-set the App Store so the Updates will again appear under the Updates tab?
Many Thanks,
David

Wanna know this too

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the 1st generation.

How do I download IOS5 onto a first generation ipad? Software Update does not appear under General in Settings on the first generation ipad.

The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
Connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Minimized messages do not appear under the Window menu

If I minimize a few messages (yellow button) in Mail, then quit Mail and reopen Mail, the minimized messages don't appear under the Window menu. The only way to retrieve them is to go into Expose one at a time and click on them.
This seems like a bug or design flaw.
Any ideas?
Message was edited by: haroldo1

Apparently fixed with 10.6.2

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is do

I was running Foxfire 3.6.9 and wanted to use FTP Program add-on and it did not appear to load but appeared but then would be installed but not run or appear under tools. So I deleted Foxfire 3.6.9 and down loaded to 3.5.9 so it could get FTP and it is doing the same could not install. Even after I registered my copy. The last time I used this program it showed up under tools and worked great. any suggestions on whats going on and how I can get around this?.by ralphd3g

Delete the files extensions.* (extensions.rdf, extensions.cache, extensions.ini) and compatibility.ini in the Firefox [[Profiles|profile folder]] to reset the extensions registry.
See "Corrupt extension files": http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
If you see disabled extensions that are not compatible on the next start in "Tools > Add-ons > Extensions" then click the "Find Updates" button to do a compatibility check.

Loading Flash Paper swf causes all other button events to fail

Hi Everyone,
I have created a project with Flash which I am using Zinc to publish as a projector for both Macs and Pcs. Now, in this app I am loading a pdf document converted to a Flash Paper swf. The moment I load this swf file into my project, it appears as though all other button events fail. If I remove the code which loads in the flash paper swf, all buttons function as expected.
Can anyone please help me with a reason / solution for this?
Any help is greatly appreciated!
Cheers!

Did that and there were no errors shown at any point, such as when publishing the .apk file.
I found a solution. I was under the impression I needed to use touch events for it to work on a tablet, and changing those to normal mouse events solved the problem. Still not sure why it wouldn't work the other way, but for now it works as needed.
Thanks!

SHOWING POPUP MENU BY PRESSING BUTTON?

Hello OTN members,
The situation is as follows:
On a Form i have Button, and by pressing the button it
should bring up the popup menu ?
Is the above condition possible by right clicking the
button.
Thanks for any suggestions.
Sailesh
null

Sailesh (guest) wrote:
: Hello OTN members,
: The situation is as follows:
: On a Form i have Button, and by pressing the button it
: should bring up the popup menu ?
: Is the above condition possible by right clicking the
: button.
: Thanks for any suggestions.
: Sailesh
Hi,
You can have a popup menu attached to a button. So right click
on that button will give you the pop up menu. (in property sheet
of button, attach popup menu under functional section).
I am not sure about bringing up a popup menu through
when-button-pressed of a button. (unless you have a different
canvas, containing your pop up menu...)
Hope this can help.
Thanks,
Srinivasa Rao
null

Unwanted popups appear while printing from a VS CR page

I am a new employee with 3 years experience in .Net, only small experience in framework, and no experience in Crystal Reports.
We are trying to upgrade our production box to a 2008 64 bit server. My boss has almost everything working, accept for printing is giving us grief. It is setup to print a report in a web page with a printing icon we display. It eventually prints, but a horrible little popup is displaying. The header lines says "Print, and the body of the popup says "Crystal Reports Print Control". There is a "cancel" button that is greyed out, and that it it.
The actual "Print Setup" pops up too, but we want that one to show. It goes directly to my default printer.
Once I say that I want to print, that same popup changes what it says. It then says "Retrieving page 1 of 2", etc. It goes pretty fast. I can't read it all. Once all the pages are printed, another unwanted popup appears.
It says "Server Error" as the heading, "An error occured on the server. Printing will be stopped. Would you like to view the error information?" as the message, and a "yes" or "no" button to choose from.
I have tried selecting both. When I says yes, a browser opens a file called "PrintControlError.html" that is completely blank.
We have Visual Studio 2008, and we are using CRS 12.0.0.683 and CR Basic for Visual Studio 10.5.0.0.

1) What CR assemblies are you referencing in your project?
Here is the assemblies from the web.config file:
<add assembly="CrystalDecisions.Enterprise.Framework, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Enterprise.InfoStore, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
<add assembly="CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Shared, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportSource, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Desktop.Report, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.Controllers, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.CrystalReports.Engine, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.Enterprise.Viewing.ReportSource, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692FBEA5521E1304"/>
<add assembly="CrystalDecisions.ReportAppServer.ClientDoc, Version=12.0.1100.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/>
2) What is the version of the CR assembly crystaldecisions.crystalrepoprts.engine.dll referenced in your project?
The crystaldecisions.crystalreports.engine.dll versions referred to in the project are v1.1.4322 & v2.0.50727.
3) What CR Service pack are you on?
When I look at what is installed, I can not find any service packs. My boss has also posted something on this web site, and he says that we have Crystal Reports 2008 Fix Pack 2.8 - redist installed. He also said that we tried SP3 to no effect. I hope that that helps.
Re: ActiveX server error when printing
4) Are you seeing this issue on the development computer as well as the runtime server?
The production box is the only 2008 64 bit that we have, and it is the only computer that we are having an issue on.
5) If on the runtime server only, how was the CR runtime deployed? I see CR Reports 2008 runtine is installed?
I'm not sure how CR was deployed, because the only 2 other developers to tough this are gone.
6) Are you using default app pool, or custom app pool?
Don't know how to answer this question.
7) Are you running the app pool as 32 or 64 bit?
Don't know how to answer this question either.
Sorry, newby here.

Photoshop CC tool options popup appears when selecting a tool

I am using Photoshop CC 2014 on my MacBook Pro (2009 - 2.4 GHz Intel Core i5). I have used Photoshop CC before on a different MacBook Pro (2011) from work, but on my own Mac, the tool bar on the left behaves slightly differently.
When I click on a tool, the tool options popup appears and stays until I click on something else or select an option, before I can even select another tool. Please see the attached screen snip.
I am used to it being that I just click on it once to select a tool, without activating the tool options popup. And if I want to see other options that come with that tool, I click and hold to bring up the popup.
It's kind of annoying and slows me down. I looked everywhere, including preferences, to find a way to turn it off. I have not found it.
Has anyone experienced this? Am I crazy?
Is this a OS Mavericks issue?
Message was edited by: Toan Le

This is font cache problem
The following command can help
http://www.mostafaberg.com/2012/08/quick-fix-for-adobe-cs6-on-mountain-lion-freeze-when-us ing-middle-eastern-type-engine/comment-page-1/#comment-727
Adobe must urgently fix this bug.

Popups appear under other buttons

Similar Messages

Maybe you are looking for