Popups don't get right size, since firefox7 if it isn't specified, how do i solve this?

When we open a new popup window with no size specified, it get the smallest size that firefox can give, but there are several objects in that are just ignored, with previous versions this didn't happen, and other browsers still do it fine (they just fit the size that can show you all the stuff is in the window).

Try:
*http://kb.mozillazine.org/Corrupt_localstore.rdf

Similar Messages

My iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any ideas how I can solve this and get my screen back to normal..? Thanks

my iphone screen has gone white with a few grey lines down the right hand side.. Has anyone any idea how I can solve this and get my screen back to normal..? Thanks

Hi tag71,
If you are having issues with the display on your iPhone, you may find the Display portion of the following article helpful:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Regards,
- Brenden

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem?

I want to sync tasks in Outlook with my iPhone. I have tried Toodledo (not good) and Todo. Todo works, but it cuts off most of the text. I only get the beginning of my (long) lists. Any ideas how I can solve this problem? I starting to regret that I switched to iPhone...

Usually if you have some kind of hardware failure there is some beeping during POST or most motherboards now have LED indicators to produce and error message based on the type of failure
So if its bad memory, not place properly, mismatched, processor not inserted properly, mismatched voltage or voltage connector not present etc it beeps or generates the error id.
Power supplies can be tested for failure. There are some walk throughs for testing just them with a switch, paperclip or a jumper (I'd suggest not doing this if you are not familiar with the dangers of electricity).
Memory can be tested with memory diagnostics programs like Memtest+
Processors can overheat if the proper precautions have not been taken usually you will get a POST beep or error code for that.
If the motherboard has no response then do the basics first:
Check power connectors and power supply. Once you determine that is not the case move on to other items like graphics cards in all the way or memory.

HT4381 I bought an Apple TV and when I rent a movie, I get a display saying that no HDCP is available. How can I solve this problem?

I bought an Apple TV and when I rent a movie, I get a display saying that no HDCP is available. How can I solve this problem?

Have you verified that your TV is HDCP compliant? Consult manual and/or post model so someone can check.

My iPad conveys that it is disable, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the number board to open with a password. How do I fix this?

My iPad conveys that it is disabled, and that I need to connect to iTunes. When I connect to iTunes I get a message that I need to enter my pass code and open my Ipad, but I don't get the scree with the number board to open with a password. How do I fix this?

You will need to restore it. The sidebar of your iPad appears on itunes even if you dont enter the passcode. There's the option to restore it. More info:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

Keep getting error code -50 when trying to burn a disc. how do I solve this?

Does anyone know how to solve the problem of getting "unknown error" code (-50) when trying to burn a disc? I don't know how this happened

marobinson58 wrote:
keep getting the error code 0x8002006E when trying to burn a DVD.
It's an error thrown by Mac OS X's DiscRecording framework (as opposed to an error communicated by the drive's firmware). The message is (as you probably saw)
"The burn failed because of a medium write error."
Could this be a dirty lens issue in the drive.
I don't think there's one single cause for this error. It might be a dirty lens. It might be something else. Not all recordable optical discs work well with all burners. Try a different brand.

Photoshop CC doesn't recognize the right mouse button of my Wacom Intuos pen tablet, how do I solve this?

For some reason photoshop CC doesn't respond to the right mouse button that is on my tablet pen.
It's strange because it does work for illustrator CC, so why would photoshop CC not respond to it?
Anyhow, help please!
I have a wacom intuos pen tablet.

I checked my settings and they´ve always been like this:
So that's not it.

I don´t get the option in itunes to import photos from iphoto, how can I get my photos in my ipad?

I don´t get the option in itunes to import photos from iphoto, how can I get my photos in my ipad?

So you don't see this and you cannot navigate to it when you select Choose Folder from there drop down menu?

If I send a text from my iphone to an iphone user the reply comes into my ipad via imessage. I don't get a text reply on my iphone. Any ideas how to fix?

If I send a text from my iphone to an iphone user the reply comes into my ipad via imessage. I don't get a text reply on my iphone. Any ideas how to fix?

Yes. On your phone make sure it is set to send messages from your phone number, not your apple id or other email address. That way when they reply it will go to your phone.

HT4623 in our house we have 2 iphones but only since the upgrade to ios 5 my partner also gets all texts my firends who have iphones too.. how do i stop this?

in our house we have 2 iphones but only since the upgrade to ios 5 my partner also gets all texts my firends who have iphones too.. how do i stop this from happening? I do not get messages he is sent though??
Please can you help and let me know what I need to do to fix this - thanks!

you guys are using the same apple id in imessage seperate apple id and you wont have the problem

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

I turned off my computer while installing something and now I only get the start-up screen with the apple logo. How do I fix this?

Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

I have set up iCloud on my iPad as instructed. When I try to login to iCloud from safari on my iPad I get redirected to set up iCloud on this iPad. How do I solve this? iPad 2, iOS 5.0.1

I have set up iCloud on my iPad as instructed. When I try to login to iCloud from safari on my iPad I get redirected to set up iCloud on this iPad.
How do I solve this?
iPad 2, iOS 5.0.1

If you upload a document from your computer to your iCloud account, the document automatically appears in the app on the iPad - If the app works with iCloud.
You can't log into iCloud and transfer just any and all documents from your computer to the iPad. That's now how iCloud works. You have to upload all of the compatible files into iCloud before you get to the office and then the files will be accessible on your iPad.
There are really only a few apps that even work with iCloud in this manner right now, the Apple iWorks apps work with iCloud, so once again - at this point in time - given the way that iCloud works - there is no reason to log into your iCloud account on the iPad. You have to understand what iCloud does and how it works and I think then it makes sense as to why you don't need to log into iCloud on the iPad.

I'm unable to update iPhoto and iMovie since I downloaded Maverick. How can I solve this?

I have been trying to download iMovie (currently 10.0.4) and iPhoto (currently 9.5.1) but the Apple Store never lets me do so. I am currently outside the U.S., where I purchased my laptop and I wonder how can I solve this. Thanks in advance for any help!
Here are the error messages:
I don't have any other Apple ID.
This laptop only has one user, and the software was included in the original purchase (so, no refund possible).
I tried many times.

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.

Hi I am from Spain and I am new on Macworld, recently I have bought a Mac Book pro, the keyboard is not configured rightly when I have to write @ I have to press g instead of @ key , how can I solve this problem ?. Thanks in advance.

Hi ,
I am from Spain and I am new in MacWorld, recently I have bought a MacBook Pro , but teh keyboard is not configured rightly, when I want to write @ I have to press g instead of the @ key, or the symbol for questions ?, I have to press :: key. Please how can I solve this problem ?. Thanks in advance.
BR,
XAvier

xavier85 wrote:
I am new in MacWorld
Sorry to disappoint you, but this isn't MacWorld.
when I want to write @ I have to press g instead of the @ key
Are you sure you don't have to press ⌥-G (Option-G) to get @?
Anyway, sounds like a keyboard/keyboard layout mismatch.
Go to System Preferences > Language & Text > Input Sources. From "Select input methods to use" enable (check) the following
Keyboard & Character Viewer
U.S.
Spanish
Spanish - ISO
Also enable "Show Input menu in menu bar".
The Input menu should appear to the right of your menu bar, with the icon of a national flag. From this menu, choose "Show Keyboard Viewer". Then compare the layout displayed by Keyboard Viewer with the label on your MBP's keyboard. If it doesn't match, choose a different layout from the Input menu.
My suspicion is that you're using a US keyboard with a Spanish keyboard layout, hence the difference you noted.

Since iOS 5activation not possible. Tried it for a few hours but doesn't work. How can i solve this problem?

When I try to activate from my iPhone it says: iPhone could not be acticated, actication Server is unavaillable. When I connect to iTunes it says: No Sim-Card insert. But my Sim-Card is insert! How can i solve this problem? It's freaking me out. I try it since yesterday without any success...
Please help.

If you have to ship your phone back to the US, then you will need to ship is to a friend or a relative who actually lives out there. You CANNOT ship it directly to Apple as they will not accept it. Send it to a relative or friend that you have there and if you don't have any, then you are out of luck as there is nothing that you can do.
That is why is was not really a good idea to purchase an iPhone is the US when you are ultimately going to use it in China. With no international warranty on the iPhone you are stuffed really. You should have bought it in China and then you would not be facing this problem.
Nothing you can do except get on a plane and fly to the US or send the phone to a friend or relative.

Popups don't get right size, since firefox7 if it isn't specified, how do i solve this?

Similar Messages

Maybe you are looking for