POR: Vendor notes not transmited to the PO
Hi,
I'm working on SRM 4.0.
In my scenario, the Vendor creates a POR with additional notes ("Comments from the vendor").
These notes are visible in the POR, but:
-These notes are not visible in the POR validation screen
-These notes are not transmitted to the PO when the user "validates" the POR.
Has anyone faced this issue: did you find a workaround ?
NB: I opened a ticket on OSS.
Regards.
Vadim
Hi Ibou,
If it's only for that one PO, why not update the Vendor address in the purchase order itself? I assume that all other purchase requisitions created after the change copies the udpated address already.
I also tested the scenario in our system and it behaves similarly to your sandbox system.
Cheers.
Similar Messages
-
In the attached VI I don't understand why data from the inner case structures are not being transmitted to the array.
Thank you.
Solved!
Go to Solution.
Attachments:
TEMP.vi 25 KBIt took me some time to figure what you are trying to do but I think I have it now.
The SR is still required.
What is happening is your "Bundle By Name" is replacing all of the fields of the cluster, not just the value coming out of the case structure. So to maintain the cluster stuff you do in earlier iterations you can either...
1) Put the "Index array, Bundle by name, and Replace array" inside the case structure and ONLY bundle the value you are setting in that iteration. (as you will see Tim post shortly)
OR
2) Move the Index array before the Case, unbundle all of the fields and feed teh case structure and run them across the case so that ALL of your output tunnels come from the coresponding input tunnel EXCEPT for the filed you are trying to set.
Ben
Message Edited by Ben on 05-05-2010 01:31 PM
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction -
Report for the account of vendor invoices not received ?
Hi friends;
Is there a report or a transaction that would list the details (expense accounts, cost center an amounts) in the account of vendor invoices not received ?
ThinksHi ,
me2n report in which u get total amount for invoiced and another column still to be invoiced amount .So check in that report even it is with PO number. -
I have had to take my pc back to factory settins, so lost my itunes, tried to install again getting message saying
the installation package could not be opened verify the package exists and that you can access it or contact the vendor to verify that this is a valid windows package,Hi
Try the following:
Uninstall iTunes and Quicktime
Reboot
in the task tray right click the quicktime icon and click exit.
navigate to the folder in program files and remove the quicktime directory and all its files.
Reboot.
Now try install iTunes and quicktime and it should work
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Vendor information not updated in the PO
Hello,
I have a case where a PReq was created with a blocked vendor GE Canada then when the buyer converted the Preq into the PO before saving the PO they she changed the vendor to GE Canada (Not blocked) but when she save the PO it still kept the old vendor's address which is in Toronto instead of updating the address with the unblocked one which is in Calgary.
What causes this?
Thanks
IbouHi Ibou,
If it's only for that one PO, why not update the Vendor address in the purchase order itself? I assume that all other purchase requisitions created after the change copies the udpated address already.
I also tested the scenario in our system and it behaves similarly to your sandbox system.
Cheers. -
F-44 Vendor Clearing: Not able to save the reason code
Hello Experts,
We are testing t-code F-44. We are attempting to perform a vendor clearing with a Debit Balance Write-off. As part of the test we require to add a Reason Code to the transaction posting. Unfortunately, the reason code is not being saved to the FI transaction being generated.
I will be glad to provide further information if needed, also points will be rewarded as soon as suitable answer is received.
Thanks,Hello Experts,
We are testing t-code F-44. We are attempting to perform a vendor clearing with a Debit Balance Write-off. As part of the test we require to add a Reason Code to the transaction posting. Unfortunately, the reason code is not being saved to the FI transaction being generated.
I will be glad to provide further information if needed, also points will be rewarded as soon as suitable answer is received.
Thanks, -
Vendor if not maintained at the company code level
Hi,
System should not save the PO, if the vendor has not maintained at the company code level. How to achieve this?
Regards,
Sattuj> System should not save the PO, if the vendor has not maintained at the company code level. How to achieve this?
Vendor Need not to be Maintained at Company Code Level For Creating Purchase Order.
During IR only System will Look whether Vendor is Maintained at Company code Level.
Try the User Exit MM06E010 Field selection for vendor address and Check any Possibility is there.
What you can do is you Can Restrict Users to Use MK01. And give Authorization to Limited Users for XK01.
Regards,
Ashok
Edited by: Ashok Kumar Telikula on Sep 18, 2008 9:05 AM -
I am trying to get authorisation to use Adobe digital edition, but my book's vendor is not on the list, and hence the password not accepted.
Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers. -
First name is not transmitted to the other system through Idoc
Hi all,
Here customer is created in R/3 system & then transmitted to the other system through I doc.
Issue is first name is not transmitted properly or is transmitted but nit correct value.
I checked the segments of respective i doc in we05 there i could see right values. But in target system it is totally wrong or the word 'CONSTANT' is coming.
what could be the reason & where i can find it out.
Please help me
Thanks
JMHi
The issue should not be in SAP. You need to check with the middleware system which reads the data from SAP and triggers an IDOC and sends it to the other system.
Regards -
Preferred vendor not being copied from the selection list of F4 --- Shop
Hi SRM Gurus,
When we are creating a shopping cart with the sources of supply, preferred list of vendors is displayed when we click the icon next to the preferred vendor in the browser. Source of supply, F4 in GUI also gives a list of vendors but if we select the vendor name, it is not being copied.
Else, if we type the business partner number in the tab, it gets selected.
Can anyone faced the similar type of problem?
Kindly suggest.
Earliest reply will be highly appreciated with points.
Sincerely,
Sridhar.Hi Yann,
Thanks for your reply.
I checked though. My problem is little different as I can see the list of vendors and also if I type the BP id of the particular vendor in the preferred vendor tab it works. Only I cannot doubleclick the vendors name and select it to the preferredvendor tab.
Also once selected I dont have any issues in creating the PO and the complete cycle.
Any other suggestions.
Sincerely,
Sridhar. -
i am not able to download the latest version of itunes because it show me this "There is a problem whith this windows installer package. A program required for this install to complete could not be run. Contact your support personnel package vendor" And so i cannot put new songs or videos in it...
Repair your Apple software Update.
Go to START/ALL PROGRAMS/Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you don't find ASU in All programs, go to control panel/
XP- add n remove Programs/highlight ASU, CHANGE then REPAIR.
Vista or Win7 - Programs n features/highlight ASU and click REPAIR -
How to track materials shipped by the Vendor but not received
Hi,
Can anyone explain how to track materials shipped by the Vendor but not received at the customer plant?
Thanks in advanceYou can use confirmation control in PO for tracking
1. OMGZ to Configure Confirmation control.
Here you can specify the order in which you expect confirmations from your vendors.
2. MK02 - to assign Confirmation Control to Vendor in Purchasing View.
3. To view acknowledgments that have been received,
in PO choose Item --> Confirmations --> Overview
Check this out-
http://www.sap-img.com/materials/explain-about-the-po-confirmation-control-key-in-detail.htm -
I am transmitting data over internet and WiFi ,it's working fine with Internet but when I choose WiFi for data transmission data is not being transmitted. What may be the possible issues of data transmission failure over WiFi? Please help me....
Thanks in Advance.
Neeraj@iDevAfter a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me. -
Certen user is not able to create the sc using sepecific vendor
Hi,
User is not able to create the SC entering specific vendor .
This vendor is in maintained in SRM for one pur.org (I have checked in PPOMA_BBP).
Then why he is not able to creating the sc using this Vendorwhether user is belong to same region of the Vendor or different. Is there any enhancements you have like that.
Please check those things.
Hope this will help.
Thanks
Venkatesh P -
I bought iPhone 6 plus last week, which came with ios 8.1 pre-installed, now when I call, my voice is not reaching/transmitting to other person on the call while talking on speaker mode but as soon as I turn off speaker mode my voice reaches to that person.
Another problem iHi kshitij 2589,
Thanks for visiting Apple Support Communities.
It sounds like you can't be heard on calls when using speakerphone. I know it can be frustrating to encounter unexpected issues with a new device.
I'd recommend going through these tips first, to see if they have an impact on the behavior you're seeing:
Test the microphone
To find out if there is an issue with the microphone itself—and not the app you're using or your cellular connection—test the microphone with the built-in Voice Memos app. Speak into the microphone and then play back the recording. You should be able to hear your voice clearly.
Follow these steps, testing after each with Voice Memos.
Unplug anything plugged into the headset jack.
If you're on a call and holding your phone next to your ear, speak into the microphone and make sure you don't block it with your fingers or shoulder.
If you're using a screen protector or case that covers the microphone, remove it. Clear any debris from the microphones.
Restart your device.
Update to the latest version of iOS.
If you've tried these steps and people still can't hear you well on calls, contact Apple Support.
You can find the steps above in this Apple Support article:
If your voice is too faint or sounds unclear using iPhone, or iPod touch - Apple Support
All the best,
Jeremy
Maybe you are looking for
-
ITunes cannot sync iPhotos to the Apple TV
An hour ago, my iMac had no problem syncing my photos from iPhoto to my TV. Now I just got this error message: "iTunes cannot sync iPhotos to the Apple TV 'Apple TV' because your iPhoto Library could not be found. Open iPhoto to create or update your
-
How to get the count of the records
Hi all, how can we get the record count after the read statement.Means if we write a read statement based on a condition,then how can we know that how many records get effected for this read statement
-
Slow performance from externally attached drive to server
We have a new 2TB external drive connected via USB to our server running 10.5.5. For some odd reason, some users are getting the beachball of death when connecting to certain folders on this volume. I'm able to connect via my machine running 10.5.x,
-
VL06I - GR - Not tied to LT06 - TO creation for Material Document
Hi, When I do GR from VL06I report for Inbound deliveries, it does not take me to LT06 - TO creation with respect to Material Document after GR posted. Basically it takes to VL32N screen during GR posting. Manually when I do GR using Tcode VL32N - ta
-
I'm trying to convert a PDF to Word. The convert box will not let me choose a format.
I am signed in and trying to convert a PDF to Word. I can't get the convert box let me choose the format (won't light up) What am I doing wrong?