POR which contains rejection from vendor causes errors in the EBP

Hi @all,
are there a solution within SRM 5.0 & EBP 3.5 that PORs that containing rejections from the vendor regarding a PO doesn't run into errors within the EBP. Thats not covered by the POR workflows as far as I know.
Probably someone knows more...
Thanks for a reply.
Stefan

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

Document store access caused errors in the SAP Correction System

Hi Gurus,
I have this user who is trying to make changes to a workbook in DEV which is published to a folder with some users who are assigned to role. This user is the only user with Developer 2 role. When the user make changes and try to save the workbook to her role or favorites so that the changes are transported to BWP, the user is getting "Document store access caused errors in the SAP Correction System".
Do we have any suggestions/solutions, I would really appreciate any help on this.I would also assign full points for the most helpful answer.

I have exactly the same problem with the user who is trying to save the workbook, where he made minor change.
Any clues?
Thank you.
Vitaliy

Hello guys ..when i try to update any applecation..it puts the first user a ccount and it ask the password which i dont know it cause im not the first user of this i pad ,,,,so how can i changebit to update apps dute to my account name and password???

hello guys ..when i try to update any applecation..it puts the first user a ccount and it ask the password which i dont know it cause im not the first user of this i pad ,,,,so how can i changebit to update apps dute to my account name and password???
please answer me

Delete all apps that were purchased with the former ID and renown load or purchase them with your ID.

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Printing from Preview produces error message "The file couldn't be opened".

Hi,
Ever since the upgrade to OS X 10.8, I get the error message "The file couldn't be opened" each time I want to print from Preview. I just have to click "OK" and then everything prints fine, but if anyone knows how to get rid of this message, it would be even better!
I have run "Verify disk permissions" without success.
The system is on an SSD volume whereas my home volume is on an internal HD. But other users with (smaller) accounts residing on the system volume have the same problem.
Each time I open the print dialog, the following message appears in the logs:
com.apple.Preview.TrustedBookmarksService[2159]: Failure to de-serialize bookmark data file.
I removed files related to Preview in ~/Library/Preferences/
There is no *.plist file in ~/Library/Application Support/Preview
Thanks!

Pages 5.2 Mac OSX 10.9.2
Start Pages app
Create a blank document
File > Save or <Command>+S
Select Mac Device and find your user folder or favorite, Desktop (not iCloud)
Error: the file "Untitled.pages" couldn't be opened!?!
Repeat giving the document a different name and it works
Since when do we write error messages with "n't"?
Usually a well written error message offers a suggestion as to what you might do about it?
Since it says opened and I clicked on Save, there is a bug in there somewhere.
All I was trying to do today was copy and paste some text from a website into numbers spreadsheet
Both Edit > Paste options but the text in one cell so I tried to save it as a text file first to try and import the data
Text Edit does not have a text only export format so before loading Terminal and starting vi or emacs, I tried pages. I'll go try XCode's editor or my Windows 7 vm with notepad and openoffice
I miss the old Pages with the Appleworks importer, this one needs more Quality Assurance Testing IMHO
WWSJD "What Would Steve Jobs do?"

Running package programmactically from console causes error if package uses connection in Connection Manager.

Hello my friends:
I attempted to run a few packages programmatically using the code and solution on this page:
http://msdn.microsoft.com/en-us/library/ms136090.aspx
I observed that the script and process failed when I use the connection in SSIS/SSDT connection Manager in Visual Studio 2013. Meaning if I create a Connection for the Project in the Connection Manager and use it on tasks.
However, the project and packages will run just fine if I simply add individual connection to each task where needed and do not use the Connection manager.
If I use the Connection Manager, I get this error: This only happens when I run the package programmatically,
if I run the package directly from Visual Studio, I get no errors.
Error Message:
Error in Microsoft.SqlServer.Dts.Runtime.Package/ : The connection "{0E6E938E-B0
84-45E6-9110-0D532BD61787}" is not found. This error is thrown by Connections co
llection when the specific connection element is not found.
Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline : Cannot find th
e connection manager with ID "{0E6E938E-B084-45E6-9110-0D532BD61787}" in the con
nection manager collection due to error code 0xC0010009. That connection manager
is needed by "SQL Server Destination.Connections[OleDbConnection]" in the conne
ction manager collection of "SQL Server Destination". Verify that a connection m
anager in the connection manager collection, Connections, has been created with
that ID.
Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline : SQL Server Des
tination failed validation and returned error code 0xC004800B.
Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/SSIS.Pipeline : One or more co
mponent failed validation.
Error in Microsoft.SqlServer.Dts.Runtime.TaskHost/ : There were errors during ta
sk validation.
Connection Manager Screenshot:
I am using that connection in an SQL Server Destination Task:
And here is the code:
class Program
class MyEventListener : DefaultEvents
public override bool OnError(DtsObject source, int errorCode, string subComponent,
string description, string helpFile, int helpContext, string idofInterfaceWithError)
Console.WriteLine("Error in {0}/{1} : {2}", source, subComponent, description);
return false;
static void Main(string[] args)
string pkgLocation;
Package pkg;
Application app;
DTSExecResult pkgResults;
MyEventListener eventListener = new MyEventListener();
pkgLocation =
@"C:\Users\Administrator\Desktop\ExampleConnectionMgr\DataExtractionB.dtsx";
app = new Application();
pkg = app.LoadPackage(pkgLocation, eventListener);
pkgResults = pkg.Execute(null, null, eventListener, null, null);
Console.WriteLine(pkgResults.ToString());
Console.ReadKey();
Thank you everyone!

I have confirmed that this problem, at least on the surface is caused by the lack of reference to the Connection in the Connection Manager as indicated by the error message.
The solution here will require that the Connection is set directly within each task.
If I simply set the connection in each task then the page runs just fine programmatically:
I am also able to convert the Connection in the Connection Manager to Package Connection as shown in the screen shot below. This will override all references to the Connection Manager and make the connection local within each package or package
task.
Is there any other solution out there?
Thanks again!
Synth.
This is exactly what I asked for in my previous post. Sorry if it wasnt clear.
I guess the problem is in your case you're creating connection manager from VS which is not adding any reference of it to packages which is why its complaining of the missing connection reference
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page
Hi my friend:
Do you know how I can include the connection programmatically in code?
I found this article but it is not very clear to me:
I do not want to create a package in code, just the connection so that the program can run.
Here is the article:
http://msdn.microsoft.com/en-us/library/ms136093.aspx
Thank you so much.
Patrick

CF8 upgrade from Cf7 causing error

Okay, i've done plenty of CF7 to CF8 upgrades and I have
never seen this issue. I run the autoplay,.exe and InstallAnywhere
launches and I make it to the language select screen and click
okay, About 3/4 of the way through the next status bar. I get a
Fatal Application Error pop-up box stating This Application has
Unexpectedly Quit. Invocation of theis Java Application has caused
an InvocationTargetException. This application will now exit (LAX).
The details button then states this:
java.lang.NumberFormatException: For input string: "wo"
at
java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.valueOf(Integer.java:526)
at java.lang.Integer.decode(Integer.java:918)
at ZeroGia.a(DashoA8113)
at
com.zerog.ia.installer.util.magicfolders.JavaHomeMF.b(DashoA8113)
at
com.zerog.ia.installer.util.magicfolders.MagicFolder.initializeAllMagicFolderPaths(DashoA 8113)
at com.zerog.ia.installer.LifeCycleManager.j(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.h(DashoA8113)
at com.zerog.ia.installer.LifeCycleManager.a(DashoA8113)
at com.zerog.ia.installer.Main.main(DashoA8113)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native
Method)
at
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.zerog.lax.LAX.launch(DashoA8113)
at com.zerog.lax.LAX.main(DashoA8113)
The installation log shows this: (no errors)
Fri Jul 18 08:49:14 CDT 2008
Free Memory: 9485 kB
Total Memory: 27388 kB
java.class.path:
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\InstallerData\IAClasses.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jdglue.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\InstallerData\Execute.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\InstallerData\Execute.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\InstallerData\Resource1.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\InstallerData\Resource1.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\InstallerData
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\InstallerData
ZGUtil.CLASS_PATH:
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\InstallerData\IAClasses.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jdglue.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\InstallerData\Execute.zip
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\InstallerData
sun.boot.class.path:
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\lib\resources.jar
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\lib\rt.jar
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\lib\sunrsasign.jar
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\lib\jsse.jar
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\lib\jce.jar
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\lib\charsets.jar
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\classes
java.ext.dirs:
C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre\lib\ext
C:\WINDOWS\Sun\Java\lib\ext
java.version == 1.6.0_01 (Java 1)
java.vm.name == Java HotSpot(TM) Client VM
java.vm.vendor == Sun Microsystems Inc.
java.vm.version == 1.6.0_01-b06
java.vm.specification.name == Java Virtual Machine
Specification
java.vm.specification.vendor == Sun Microsystems Inc.
java.vm.specification.version == 1.0
java.specification.name == Java Platform API Specification
java.specification.vendor == Sun Microsystems Inc.
java.specification.version == 1.6
java.vendor == Sun Microsystems Inc.
java.vendor.url ==
http://java.sun.com/
java.class.version == 50.0
java.compiler == null
java.home == C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows\resource\jre
java.io.tmpdir == C:\DOCUME~1\SCHOOL~1\LOCALS~1\Temp\1\
os.name == Windows 2003
os.arch == x86
os.version == 5.2
path.separator == ;
file.separator == \
file.encoding == Cp1252
user.name == school%world
user.home == C:\Documents and Settings\school%world
user.dir == C:\Documents and Settings\school%world\Local
Settings\Temp\1\I1216388864\Windows
user.language == en
user.region == null
Nothing was installed.
Installed by InstallAnywhere 8.0.1 Enterprise Build 3080, by
Macrovision
User Interactions
Summary
Installation: Successful
This is a client's server so I have limited knowledge of
configuration that isn't obvious. I did notice that outbound port
80 seems to be blocked as I can't hit web pages from the server,
but DNS resolution works. Inbound port 80 is obviously open because
the current sites running on this server are reachable. I also
noticed FuseTalk is installed Any pointers as to what the issue
might be would be very helpful.
Thanks

booster94 wrote:
> Any pointers as to what the
> issue might be would be very helpful.
>
> Thanks
The first suggestion is to check the Actual File Size and MD5
Checksum
of the file. Assuming you are installing from a download file
as is
common, the file may be incomplete.
The ColdFusion Download page provides the expect values.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=coldfusion

I want to sync my music library onto my iop touch which contained music from before and itunes is backing up (step 1 of 3) i dont want my music to be backed up and want to have my other music on itunes! please help

hello , basically i had some music on my ipod touch 4g , i wanted to sync my music from the music library on itunes to my ipod, to do this i clicked on my devise on itunes and then clicked music and then clicked sync music, on the top of the page it said "backing up (step 1of 3). It stayed like this for atleast 7 hours and when i ejected the ipod their was no music in my ipod ! help me , i want to quickly copy the music library onto my ipod...

The backup that iTunes makes does not included synced media like apps and music. For what the backup contains see:
iTunes: About iOS backups

Calling BSP application from Portal causes error

Hi,
called a bsp application from our portal. The application prompts the following error message:
BSP Exception: The object sap-tray-type=PLAIN_sap-tray-padding=X_sap_ep_version=7.00.200611091758_sap_ep_baseurl=http://v900stwmk1902.v900dtk1.v900.intern:50000/irj/portal in der URL /sap bD1kZSZjPTIwMCZwPTMwOTUxJnY9NyUyZTAwJmk9MSZzPVNJRCUzYUFOT04lM2Fhc2FwdDAzZW4xX1QwMl8wMCUzYXBFMVdnMmlqS21LYnNSZ01mMzIyLXpRdkwxMjdoYWF2NHFBeU9fTGEtQVRU)/bc/bsp/sap/zsi02/sap-tray-type=PLAIN&sap-tray-padding=X&sap_ep_version=7%2e00%2e200611091758&sap_ep_ is not valid.
We used an BSP iView (EP 7.0 and BI 7.0) Any ideas?
Thanks.
Frank

Hi,
I am not sure how did you get that bsp-url but here are the steps:
1) Create a system and assign an alias to it.
2) Make sure you give proper values in Connector, User Management and ITS Property Category
3) Check the connection by creating a sample SAP Transaction iview using WebGUI
4) If this is working fine, then create a BSP iview. Make sure you select proper system alias, BSP Defination Type (BSP), give the correct Application Namespace, BSP Application, Customer Namespace and start page.
Let me know what are the values you have entered here and we can try to fix this problem.
Cheers,
Sunil
PS: Reward points for helpful answers.

Why sql select 'Hello'||'world012345678' from dual; cause error?

I have problem and your help to solve it would be very much appreciated.
Can anybody tell why the result is so different for the following two sql-sentence in SQL/PLus?
sql>select 'Hello'||'world012345678' from dual;
sql>select 'Hello'||'world0123456789' from dual;
sql>select 'Hello'||'world012345678' from dual;
Result:
select 'Hello'||'world012345678' from dual
ERROR at line 1:
ORA-00600: internal error code, arguments: [17182], [158346180], [], [], [],
sql>select 'Hello'||'world0123456789' from dual;
Helloworld0123456789
I found that if the length of one string equals 14, then the sql will failed as the first sentence.

If you need to check the validity of DUAL then you have:
Select count(1) from DUAL ;
NOT
Select * from DUAL;
If you find more than 1, then
delete from dual;
insert into dual values ('x') ;
commit;
Then, try you offending query.

Files will not empty from trash, causing "errors"

Okay, I know this has been covered, but nothing is working. I have 3 macs, the one in question is a Mac mini, Mac OS X (10.6.8). There are files in the trash that won't empty. They are from external drives that no longer exist. Every time I empty trash, I get "file in use" error, and I continue. Now, new issue, I have added files to trash (from external drive) and it wont empty either (this is usb thumb drive, FAT 32, still exists, is inserted and showing in finder). First, are these actually starting to clog up my system drive, or are they just broken pointers, no real size? Second, why can't I just reset trash and get rid of them. I have been dealing with this for over a year, and it is getting worse. The external drives that started the issue no longer exist, they have been reformatted. What do I do. There must be a way to rebuild the trash. I am an "under the hood" guy, is there a way to see where they are hidden and just manually remove them? Please help.
Thanks in advance,
Rich

Hi Rich,
They are Hidden files.
Show Hidden Files 1.0...
http://www.macupdate.com/app/mac/29096/show-hidden-files
Hidden Way is a toggle for hidden files view in Finder...
http://www.macupdate.com/app/mac/25716/hidden-way
Show hidden files in OSX Finder
Open the Terminal and type or copy/paste:
defaults write com.apple.finder AppleShowAllFiles -bool true
Reverting to the default of NOT showing hidden files:
defaults write com.apple.finder AppleShowAllFiles -bool false
*Restart or Force Quit Finder required to take effect.*
http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html
Or better yet...
Solving Trash Problems...
http://thexlab.com/faqs/trash.html

Selecting fields those which contains values from a table of one record

hello
Is it possible to select the fields of a table having not null values for a single record. The record contains 25 fields like
FieldNames are Field1, Field2......Field25
if Field1 and Field12 has some not null values and other fields contain null values, is it possible to retrieve these two fields...
Thanks for replies..
Rinson

Why wouldn't it be? What have you tried? What were your actual results vs. your expected results?

Switch from Qwest causing errors

I have an AEBS (802.11n) that worked just fine until I switched ISPs yesterday. I had Qwest Actiontec DSL modem/router --> AEBS --> Airport Express (extend network, airtunes, usb printer). Yesterday I switched from Qwest to an ISP that installs a microwave antennae and runs with static IP directly into my AEBS (no modem). The technician couldn't get it to work. Said something about AEBS not storing the static IP, but resorting to the DHCP IP info it was using with Qwest. We finally got it working (kind of) by running through my Vonage Motorola router, then into the AEBS. Any ideas what could be going on here?

Hi Rich,
They are Hidden files.
Show Hidden Files 1.0...
http://www.macupdate.com/app/mac/29096/show-hidden-files
Hidden Way is a toggle for hidden files view in Finder...
http://www.macupdate.com/app/mac/25716/hidden-way
Show hidden files in OSX Finder
Open the Terminal and type or copy/paste:
defaults write com.apple.finder AppleShowAllFiles -bool true
Reverting to the default of NOT showing hidden files:
defaults write com.apple.finder AppleShowAllFiles -bool false
*Restart or Force Quit Finder required to take effect.*
http://www.apple.com/downloads/dashboard/developer/hiddenfiles.html
Or better yet...
Solving Trash Problems...
http://thexlab.com/faqs/trash.html

Cause: Error within the lock operation ( Local Table Overflow)

Experts
W observed, Incidentally when user tries to peform some business transaction, suddently the Lock table get fills up with and all other users get "System Lock error"
either we log off user and after some time when user tried to perform same transaction.
the system and as well lock entries of that user is normal.
Why incidentally incidentally it is happening. We checked with user and they confirms they were doing normally nothing really change compare to their day to day activities.
Rgds

Hi,
Check Enqueue Statistics from sm12 is there are any Enqueue errors in your system. It will also show you the current status of the table. Since how long you getting this problem .. if its recent i suggest see if there is any big activity going on your system which is temperary ... if yes then see if this problem disappers after activity ..
You can do a dignosis check in sm12 too .. se if this contains any error.
Or if you want to have a permenant solution then enque/table_size increase this parameter from rz10 and restart your system.
Shailesh
Edited by: Shailesh Mamidwar on Jun 25, 2009 11:47 AM

PSE11 stops working and is causing errors in the Reliablity Report Windows 8

I keep getting this error code can anyone assist me? I have had several calls into Adobe and the last person said if it is working disregard the error. I get that but it is effecting my performance. I have uninstalled twice and reinstalled it twice as well and the error continues. Please assist me once tech told me to install Quicktime and that did not help either it is a bit frustrating.
Source
Elements 11 Organizer
Summary
Stopped working
Date
4/11/2013 12:07 PM
Status
Report sent
Description
Faulting Application Path:              C:\Program Files (x86)\Adobe\Elements 11 Organizer\PhotoshopElementsOrganizer.exe
Problem signature
Problem Event Name:      APPCRASH
Application Name:           PhotoshopElementsOrganizer.exe
Application Version:         11.0.0.0
Application Timestamp:   503fdd1d
Fault Module Name:        QtCore4.dll
Fault Module Version:      4.8.1.0
Fault Module Timestamp:                503fbfa6
Exception Code:                c0000005
Exception Offset:              00050b14
OS Version:        6.2.9200.2.0.0.768.101
Locale ID:           1033
Additional Information 1:                111e
Additional Information 2:                111ef96ebf8a0fead9be2dd0c19dacd2
Additional Information 3:                7942
Additional Information 4:                7942f7a164f0a42120fbf45dde61b5dd
Extra information about the problem
Bucket ID:          3b07f926dcb86fc12af834aa3e6aa10e (-1150612356)

Start PSE to get to the Welcome screen.
Hold down the Ctrl + Shift keys and click Organizer. Keep holding down the keys until you see the Catalog window.
Select your catalog and click Repair. Select “repair anyway” even if PSE doesn’t find problems.
Then for good measure, click Optimize.
If repairing resolves your issue then fine else repeat the above steps, but click New to create a new catalog. If you’re able to import photos into the new catalog and the Organizer works fine, then problem can be old catalog.
Check for Task Manager and end the "ElementsAutoAnalyzer.exe" file and then try.
- Try launching Organizer directly from the exe with Admin rights.
Some more solutions once you try these are here http://forums.adobe.com/message/4994459#4994459
Thanks,
Garry

POR which contains rejection from vendor causes errors in the EBP

Similar Messages

Maybe you are looking for