Porque no puedo utilizar drag and drop en captivate 8?

Tengo instalada la version de prueba, y el panel de drag an drop no se muestra, aparece desactivado en todos lados.

Arrastrar y soltar característica está disponible en modo de prueba. No hay diferencia en la versión de prueba y copia adquirida. Una interacción de arrastrar y soltar implica un origen de arrastre y un destino de colocación. Los usuarios arrastran las fuentes de arrastrar y soltarlos en dianas abatibles.
Por favor, háganos saber cómo es exactamente lo que está tratando de poner en marcha la opción de arrastrar y soltar. Puede adjuntar la captura de pantalla de la pantalla Captivate aquí.
Saludos,
Rajeev.

Similar Messages

How to add Two incorrect feedbacks in Drag and drop in captivate 7.

Hi
I want to show two different incorrect feedback in drag and drop interaction in Captivate 7. Currently we can show only one even though i have increased the drag and drop attempts to 2. I want to show a try again feedback and incorrect feedback with correct options and this should not be there when the learner re-visits this slide.
Note: I am already using a success caption and have executed the action - "On Enter" to "Hide" this success caption.
Please help me with this.

Hi Sreekanth,
You understanding is correct. But,it is not even necessary to show the correct sources on correct targets along with the feedback... the correct option numbers in incorrect feedback will do.
reg point number 3, if I revisit the slide, the feedback are still displayed. For example, in this case, I added a correct feedback, but when I revisit the slide, the feedback was still appearing. So I added this action "On Enter" to "Hide" this success caption. So that is why i told specifically that none of the feed backs should be there when i revisit the slide.
Sorry Srikanth - I am not familiar with the advanced actions or variables. I have just used some from referring the examples from net. that's all

Drag and Drop in Captivate 6

Hi,
I have a Corporate licenced version of Captivate 6. I would like to know how to use the Drag and Drop interaction.
Thanking you.
With regards
Leena

Which version of Captivate 6 do you have? Drag and drop activity is included in Captivate 6.1 onwards. For earlier versions, your best bet would be to buy Infosemantics widget here:
http://infosemantics.com.au/adobe-captivate-widgets/drag-and-drop/which-adobe-drag-and-dra g-and-drop-widget-comparison
Sreekanth

Drag and drop in captivate 7

In captivate 7, there is a drag & drop interaction, is it in-built or i want to purchase the drag and drop widget.

Hello,
It is built in since 6.1, and works for SWF and HTML5 output, has not totally the same functionality of the interactive drag and drop widget (but that one only works for SWF-output).
Lilybiri

Adding drag and drop to Captivate 3 simulations

Hi,
I'm trying to design short simulation which involves moving
comments icons in a pdf file. Does anyone have any idea how this
drag-and-drop functionality could be built into a captivate
simulation?
Thanks

Captivate community contributor Paul Dewhurst offers a
drag-and-drop starter file on his website that you can use to build
drag-and-drop interactions.
As Paul mentions on his site, you need to use a 3rd-party
tool to create the actual interaction, though.
You can find the file on Paul's website here:
Drag-and-Drop
at RaisingAimee.co.uk

Drag and Drop Option

I wanted to know if there is an option for Drag and Drop in Captivate 6.

30 objects is quite a lot, but either of the drag and drop widgets would be able to handle this number of drag objects.
If the user is expected to place the 5 drag objects in a specific order, you need to set up 5 targets and assign one drag object to each target.
If there is NO specific order, but you just want the user to select 5 objects from the 30 and place them in any order, you can set up a single target object that is large enough to hold all 5 drag objects and then use the Smart Snapping option to have the drag objects automatically position themselves in a list on top of the target. The user can arrange the items in the list in any order they want just by dragging the objects around.

Captivate 2 right-click and drag and drop in simulation

Captivate has been suggested as a suitable replacement for
Authorware since the announcement that Adobe doesn't plan to
continue with Authorware. I find myself in the position to put this
to the test. I'm in the process of recreating a course that had
been created in Authorware in a toolset comprised of Artuculate
Presenter, Articulate Quizmaker, Articulate Engage, Captivate, and
PowerPoint.
The simulation created in Authorware has these feautures:
-learner right clicks on items on screen to see a context
menu then selects option from the context menu
-learner drags toolbar and other items on screen to another
screen location
-learner selects item from Windows Start>>Program and
other application menus. As the learner's mouse moves over the
menu, menu options highlight and flyout menus appear even if
they're not directly involved in the simulation
-learner logs into course with an employee ID number. This
information is stored and is used in the simulation in which they
log into the system being simulated.
Can I do any of these things in Captivate?
I suspect I can simulate the flyout menus with a number of
mouse over hotspots - exactly the way it's done in Authorware.
However, I haven't found any way to do simulate the other items:
-use of drag and drop where the learner performs the action
-use of a variable value to check validity of what has been
entered in the text field
-use of right click to advance Captivate simulation.
I'd appreciate any help you can give me. After all, I've
heard many people claim that Captivate can replace Authorware.
Thanks
Grace Daminato

Hi Grace,
Captivate is indeed a replacement for Authorware, but only in
the way that an Audi is a replacement for a Ferrari. They do the
same basic job, but you need to do some after market modifications
to the Audi to level the playing field somewhat.
1) Flyout menus are indeed possible, if you're willing to
create "rollovers" that display a picture of the expanded menu when
the user mouses over. You are limited to exposing only first-level
menus, however. Captivate does not allow for rollovers on
rollovers, except possibly via Captivate 3's Slidelet
functionality.
***EDIT***: You can also use Paul Dewhurst's rollover widgets
to fake multi-level menu behavior. They are available from Paul's
site here:
http://www.raisingaimee.co.uk/index.php?option=com_content&task=view&id=24&Itemid=29
2) Drag-and-drop in Captivate is currently only available as
an add-in Flash object, each of which must unfortunately be built
by hand in Flash. Adobe Community Expert Paul Dewhurst offers
source files for such interactions on his website:
http://www.raisingaimee.co.uk/index.php?option=com_content&task=view&id=13&Itemid=29
3) Captivate has built-in checking of field values, but you
are limited to hardcoded values only. If you need variable-based
input checking, you must create it yourself in Flash and insert it
as an animation.
4) Right-click is possible in Captivate, but must be added
manually. Captivate community contributor William Heinz has created
a nifty right-click solution for HTML/SWF publication and Paul
Dewhurst again comes to the rescue with a solution for .EXE-based
output:
HTML/SWF-based Output:
http://www.adobe.com/devnet/captivate/articles/rightclick.html
EXE-based Output:
http://www.raisingaimee.co.uk/index.php?option=com_content&task=view&id=12&Itemid=29
Unfortunately, making these modifications to Captivate files
comes at a cost. First, there's the overhead of tracking down and
implementing the custom enhancements. More importantly, Captivate
has no way of "scoring" custom enhancements, so any such
interactions will not be reflected in the user's reported results.
If you're willing to live with these limitations, and a few
others, Captivate can indeed be a suitable replacement for
Authorware.

Recording Drag and Drop

"Trying" to record a software simulation that involves
dragging and dropping. Captivate is only capturing my click on the
object and then my next click when I let go at the end - it isn't
showing the "dragging" part of the simulation. Any suggestions on
what I'm doing wrong.... (Using V 2.0.)

Hi there
Assuming I'm understanding the situation correctly it would seem that this is a Full Motion Recording (FMR). By that I don't mean you recorded the whole presentation using FMR. Normally Captivate shifts gears and records any clicks and drags as FMR. So you might see nine slides of screen after screen then see a 3 second FMR as a window is dragged from one location to another.
I suppose you might test the FMR situation by simply trying to record a brief project using total FMR from start to finish. See if that works or not.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Advance drag n drop in captivate

I was
wondering if it is possible to create a drag and drop in captivate with images. here is my scenario
I have 6 landing images then i have 6 images that need to be dragged to the correct landing image. when the person places all the images on the landing images they can press a submit button and those that are correct stay and those that are incorrect would move back to the original place so they can be dragged again to the landing images. Is this possible to do using variables in captivate and if so can someone walk me throught he process.
Thanks for any help

Unfortunately, if you want to do this I believe you will have to make a custom drag and drop interaction in Adobe Flash.You can then import this as an animation onto the Captivate timeline.
There should be some nice drag and drop interaction actionscript tutorials/templates on the net, just make sure you know which version of Actionscript you will be publishing in, and make your Flash/Captivate files are the same.(There is a huge difference between AS2 and AS3)
Depending on your requirements, you may also need some extra actionscripting to make a 'complete' button communicate with Captivate to jump to the next slide, for when you are done.

I want to Sync my iPhone 4 to iTunes however I get an error message from iTunes each time I connect the phone to the PC saying that I should restore to factory settings. Frustrating because it's already annoying enough that I can't drag and drop mp3's!!!

I have never been so frustrated before in my life with any phone. I find it obnoxious as it is that I cannot simply drag and drop files (especially MP3's) straight from my PC directly into my phone, which I have been used to doing up until now. Everyone who convinced me to get the iPhone has instructed me that my frustration can be fixed by downloading iTunes and syncing it all up via that program (which I have never used before). So, I downloaded the program successfully, however when I connect the iPhone 4 to the PC and iTunes is open, I get an error message that 'iTunes cannot read the content of the iPhone "iPhone" and that I should go to the Preferences tab of the iPhone and select 'restore' to restore this phone to factory settings. First of all, I don't understand why I need to do that. I have already downloaded apps and other important things in the 2 days that I have the phone. I am also scared that it will erase my contacts. This is such a headache. Music is very imporatant to me, but I am getting so frustrated that I don't have freedom over the phone which I thought was supposed to be one of the best out there. I would really appreciate help in this matter. I am sure the phone is great but I am on the verge of taking it back and getting something else.

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

When I drag and drop an icon from the address bar to the desktop is does creat the shortcut but will not display the website icon, only the firefox icon, how can I display website icons?

When I drag and drop a website icon from the Forefox address bar to the desk top, the short cut is created but the icon that appears is the firefox Icon. I want to disply the icon from the website that the short cut refers to. I have checked all I can think of in my computer to no avail.

You have to assign the favicon yourself to the desktop shortcut (right-click the shortcut: Properties) after you have dragged the link to the desktop.
You can usually find the favicon in Tools >Page Info > Media and save the icon there.
Otherwise use the main domain of the website and add favicon.ico (e.g. mozilla.com/favicon.ico ) to display the favicon in a tab and save that image to a folder.

Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?

Hi, Im not a frequent forum poster, as most of my questions can be found already answered on them!
This is a question Ive had for a long time and it amazes me that no-one else seems to ask it. I check at each OS upgrade but its never there...
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
I was able to do this years ago in MS Outlook, and utilized it all the time when I needed to push things back, now I have to open the event and select an new date in the drop-down calendar for each & every event I want to move to a new month at the end of the month.
If its definitely not possible, how to you ask apple to consider including it - it doesnt seem like a particularly difficult task.
Thankyou
Andrew.

Andrew,
Is there any way of dragging and dropping an iCal event showing in week view across to a date in the left sidebar monthly calendar?
No, but you can use cut/paste. Cut (⌘X) the event, then click on the week where you want to move the event, and Paste (⌘V).
If you have a suggestion for Apple to change that method use: Apple - Mac OS X - Feedback.

Why does not drag and drop work?!

Hello,
I am trying to implent a drag and drop from a table to an icon representing a trash.
The drop handler fails in converting the selected rows to a list:
com.sun.el.MethodExpressionImpl@87d9c00d javax.el.ELException: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
Could you help me to understand why? Below are the details.
This is the af:table:
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{bindings.MyView1.collectionModel}"
rowSelection="multiple"
columnStretching="last"
horizontalGridVisible="false"
verticalGridVisible="false" fetchSize="-1"
autoHeightRows="6" width="190"
disableColumnReordering="true">
<af:column sortable="true" headerText="Entry" id="c1"
align="start">
<af:outputText value="#{row.Description}" id="ot1"/>
</af:column>
<af:dragSource actions="MOVE" defaultAction="MOVE"
discriminant="delete"/>
</af:table>
This is the drop area:
<af:image source="Images/empty_trash_32.png" id="i2">
<af:dropTarget dropListener="#{backingBeanScope.DropHandlerBean.dropHandler}"
actions="MOVE">
<af:dataFlavor flavorClass="org.apache.myfaces.trinidad.model.RowKeySet"
discriminant="delete"/>
</af:dropTarget>
</af:image>
This is the failing listener listener (the failing point is bold):
public DnDAction dropHandler(DropEvent dropEvent) {
DnDAction dnda = DnDAction.NONE;
if (dropEvent.getProposedAction() == DnDAction.MOVE) { // delete
RichTable table = (RichTable)dropEvent.getDragComponent();
//determine the rows that are dragged over
Transferable t = dropEvent.getTransferable();
//when looking for data, use the same discriminator as defined
//on the drag source
DataFlavor<RowKeySet> df =
DataFlavor.getDataFlavor(RowKeySet.class, "delete");
RowKeySet rks = t.getData(df);
if (rks == null) {
return DnDAction.NONE;
Iterator iter = rks.iterator();
while (iter.hasNext()) {
//get next selected row key
System.out.println(rks.toArray().length); // the number of selected rows is ok
List key = (List)iter.next(); // here gives: java.lang.ClassCastException: java.lang.String cannot be cast to java.util.List
//make row current so we can access it
table.setRowKey(key);
//the table model represents its row by the ADF binding class,
//which is JUCtrlHierNodeBinding
JUCtrlHierNodeBinding rowBinding =
(JUCtrlHierNodeBinding)table.getRowData();
Row row = (Row)rowBinding.getRow();
//delete row;
row.remove();
//activate animation
dnda = DnDAction.MOVE;
return dnda;
thanks.

I did try, I obtained this:
java.lang.NullPointerException
Why NullPointerException?
I don't know if this helps, but consider that the collection model comes from a ViewObject built on three EOs with many fields, although the table only shows one column.
This is the Iterator in my pageDef:
<table IterBinding="MyView1Iterator" id="MyView1">
<AttrNames>
<Item Value="Cod1"/>
<Item Value="Cod2"/>
<Item Value="Cod3"/>
<Item Value="Cod4"/>
<Item Value="Description"/>
<Item Value="Cod5"/>
</AttrNames>
</table>
Any idea?
I will see the Key content with the debugger.

Did my first back up today using external hard drive and time machine now i can't drag and drop

Hi, i did my first back up today using time machine it all went onto my external hard drive fine. Now i cant drag and drop anyhting. I assume ive cahnged some settings in time machine but cant figure it out what to do can some one help ?
thanks

Brandbasher wrote:
Thanks Pondini but i have closed time machine, removed external hard drive.
Did you eject it first?
Now i cant drag and drop anything on my desk top, or mail or any other application. Ive tried moving folders, documents none of it works. Even moving around documents within a folder, it wont let me chnage the position of files.
That shouldn't be related to Time Machine (especially if the backups aren't mounted).
What happens when you try those things? Do you get any messages? Anything you can post a screenshot of?
Have you tried a Restart?
Does it happen in another user account? (If you don't have one, create one via System Prefs > Users & Groups.)

Drag and Drop (re-order) Thumbnails in Organizer

I am using Photoshop Elements version 5.0.2
I would like to re-order pictures in an order that will make sense for me in my business. I suppose I can go through each pix and change the time on them, so I can then sort by time stamp.
Is there an easier way to do this? I was hopeful that I could drag and drop them in Thumbnail view - but I cannot.
Thank you,
Jamie

>Is there anyway to delete the photos in the main well, without losing them from my collection?
As I understand the design, the main well is intended to be all the photos that you are managing with Photoshop Elements.
Collections are used to display a specific group of those photos in your chosen sequence for any given activity.
I suspect that since you are using a consumer product such as Photoshop Elements for your business purpose, you may need to make some compromises like having a default (the main photo well) display sequence which you see first when starting PSE that is not what you would choose.
This is not bad if PSE does what you want - just additional steps to switch to the Collection view and also to maintain (drag and drop) the sequencing of the collection when you add additional photo files to a Collection.

Porque no puedo utilizar drag and drop en captivate 8?

Similar Messages

Maybe you are looking for