Port 3689 error with latest update

Since updating today (2/25/10) to the newest AppleTV software, it no longer syncs with iTunes 9.0.3 (MacPro). I've restarted everything. In all cases iTunes says that the Apple TV is not responding (it does show up in the devices list). It says to "Check that any firewall software...port 3689." There is NO firewall software. The "More info..." link (Apple's support article - http://support.apple.com/kb/TS1447?viewlocale=en_US) says "Apple TV, iTunes 8 for Mac" and does not address iTunes 9. Everything has worked fine until this update.
I've even tried to cancel the link to my iTunes library and start over, but that gave the same error.
I've browsed the topics here (and elsewhere) and most have to do with firewall configuration. I've rechecked (System Preferences-Security-Firewall) and it is not enabled. It is also not enabled on the LinkSys router. That shouldn't matter because the only thing that changed from yesterday is the new software update to Apple TV.
I give up. Any ideas?

I've managed to get mine sorted. A friend of mine told me :
"it is all about the security/encryption you have on your wireless modem/router - WEP / WPA / WPA2.
There is a lot on the support forums about this with Atv and iPhone not connecting when mac working fine on network.
Probably worth having a look in to and maybe resetting all of it so that you have a security/encryption that all devices will work on. Ideally WPA2 as this is supposed to be the most secure with WEP being the least."
I reset mine, then restarted both imac and ATV (also did a factory restore on it) Had to go into Computers and reconnect with my itunes library with the 5 digital passcode, but its all working.
Funny that its now telling me there's a software update (not sure what version I'm on) but for now, I'm not going to upgrade

Similar Messages

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Error with Commitment Update

Hi SD Gurus,
We are on platform ECC 6.0.
While going through the SD cycle we are facing certain issues.
While creating a quantity contract and trying to save it we get a pop up box "Error with Commitment Update".
Status is being set.
The order cannot be delivered / billed.
If I'm not saving it and going back to the screen we get the following error.
System error: Funds management update (LFMOIF01,ORGVG)
Message no. FI057
Please advise.
Thanks,
Rajbans

The software component EA-PS was updated to latest patch SAPKGPPD06 which resolved the issue.

Parallel port communication error with new addresses

MD2 motors controlled by LabVIEW. I am trying to communicate with the motors through a parallel port. I plug in a PCI card which can provide another two parallel ports. I check their addresses which are 1110-1117 and 1120-1127. Then I replaced the old addresses (378), but could not communicate any more, neither writing nor reading. The parallel port setting in BIOS is bi-directional, since both writing and reading are necessary. Does this matter?
I really have no clue why or how this could happen. Any help appreciated.

Hai,
I have installed a additional parallel port card (in pci slot) in my pc. Then i installed the device driver that came along with the parallel port card. I
checked out the base address it was 278H (but i dint look the address before installing the device driver). In general centronics interface ( parallel port) are placed at their respective addresses strictly. Try reinstalling the device driver that came along with the external parallel port card or try latest updates from the manufacturer if available.
of the card.
With best regards,
JK1
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved.

I updated my iPhone with latest update. I was asked if I wanted to communicate with iCloud for all my devices. I chose yes. I than am told I need to check my email to verify my account and there is not an email for apple to verify

I updated both my iPad and iPhone with latest update. Love it! However, I wanted to use the find iPhone using iCloud feature. From the beginning of update it kept prompting me to verify my account when I wanted to use iCloud ??? Apple kept telling me to check my email to verify my account and there is not an email from them. And I'm not talking about verifying by my alternate email which I was successful at.

Blue
It sounds like you restored from an old back-up. Did you back-up just before your software update? It will use your last one and if your last back-up was a ywear old then it will use that one.
In general, if you are getting these messages on your iPhones select logout (when you get that Apple Id request) and then log back in with your newer ID.
Sorry for your losses.
Cheers

I have atempted to update my ipad 1 with latest update but after extracting software it goes to restoring ipad software and stops at around 25% on the bar. have tried several times but it does the same I have one useless ipad at the moment ! any ideas ?

I have attempted to update ipad1 with latest update but after extracting software it goes to restoring ipad software and stops at 25% on the bar. Have tried several times but it does the same, I now have one usless ipad help! any ideas ?

when connected click the iPad in the left navigation panel of iTunes, on the bottom of the summary tab: how much memory is "free" (grey)?

Latest Lync Client with latest update in one setup file

Hello,
We are building application using Lync SDK and we want to ship the Lync Client in our setup:
so we added the lync 2013 client found here to
our setup and its size 290 mb
after we faced some problems we ended up to install the update found here and
its size 86 mb
this makes the setup size bigger so our question is:
Where we can find the latest Lync 2013 client with latest update files included instead of adding
a new update files to the setup?

Lync 2013 client setup is part of the Office setup program on the installation media.
Lync 2013 Basic is a downloadable client for customers who have a licensed, on-premises Lync Server 2013 deployment and customers who subscribe to a Microsoft Office 365 plan that does not include
the full Lync 2013 client.
Lisa Zheng
TechNet Community Support

Port 3689 ERROR

after months of working perfectly, now both my AppleTV's are not syncing and both give me the "port 3689" error..
I

I have the Port 3689 problem as well.
I originally had my Apple TV set up to stream my iTunes music and photo library. I chose not to "sync" my library to the Apple TV because of the shear number of files (>20,000). This has worked fairly well for the past year.
Recently, I have purchased several movies via the Apple TV. I have been meaning to transfer these movies to my computer and/or iPhone, but was unable to do so. The information that I received from this newsgroup suggested that I turn off the streaming, which I had postponed until now.
Today, in the midst of upgrading iTunes to 7.7, and my iPhone to 2.0, and my AppleTV to 2.1, I decided to try to get those movies transferred. But now I am getting the port 3689 message. I turned off my firewall, but it still won't connect. So, not only can I still not transfer my movies, I can no longer access my shared iTunes music library via the Apple TV. What gives?
iTunes 7.7.0.43 on Windows XP SP2
Apple TV 2.1
My iTunes will stream music thru my Apple TV via Air Tunes.
My iPhone 2.0 upgrade allows me to connect and control the Apple TV via the new Remote app.

Deploy Internet explorer 11 with latest updates using SCCM 2012

Hello,
I'd like deploy IE11 with the latest updates included. The reason is that I want the IE 11 enterprise mode to be available as soon as IE11 gets installed.
I don't want to wait an update scan cycle to trigger the installation of the updates.
What is the best way to achieve that using SCCM 2012 ?
Regards,
Michel

Hi,
You have to capture the installation package with latest update by using IEAK 11 on the computer which has the IE11 with this feature.
GP to enable this feature:
Administrative Templates\Windows Components\Internet Explorer\Let users turn on and use Enterprise Mode from the Tools menu
This is only for Windows 7 computer.
As I mentioned above, for Windows 8.1, we can only deploy Windows 8.1 update 1 to add this feature to IE11, since there is no separated update can be installed for IE11 on Windows 8.1 to implement this.
Windows 8.1
Update (32-bit version)
Windows 8.1
Update (64-bit version)
Kate Li
TechNet Community Support

Mac with latest updates: installation window appears, shows message "Retrieving install" for 3 seconds then installation window goes blank. Why?

Mac with latest updates: installation window appears, shows message "Retrieving install" for 3 seconds then installation window goes blank. Why?

Hold down the option key during start up - you will be given the choice of which partition to use (Macintosh HD or Windows). I am having the same problem - Windows 7 seems to have installed but it goes to a blank black screen and there is nothing to do but force a reboot. I too have an i3 iMac... Windows 7 32-bit from original disc.

Firefox getting stuck every 5 sec while browsing with latest update 23.

With latest update 23.0.1,firefox hangs evry 5 seconds through out the browsng session and recovers and works forsome time and again issue will happen
firefox will be showing : not responding

End Firefox From Task Manager And reinstall , (You Should Clean Your System Registry With Registry Cleaner programs

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps Internet

Hello. I've Apple TV 3rd gen and MacBook Pro 2013 all with latest updates. AirPlay works fine till I don't start streaming videos from YouTube. After that AirPlay icon from MacBook menu bar simply disappears. Could some help. I'm using 2 Mbps internet connection.

Same issue here- I can airplay my amazon prime library just fine from my iphone 5 but on my macbook- (mavericks, 15 inch 2013 retina with quad core i7, nvidia 650 M and SSD) it just sputters and lags.
I have noticed web video is considerably worse than local content, giving me pauses of up to 2 or 3 seconds in which video stops but audio continues in the amazon player. Youku video, however, seems relatively stable. Our subscription speed is 25 mbps, so that should be plenty to stream SD video from Amazon and doesn't account for why it would be nice and stable from the iphone, but not the mbp.
Playing light, locally hosted steam sidescrollers like Limbo is better but gives periodic drops in framerate on the Tv. when mirroring the framerate remains steady on the MBP screen.
Games airplayed from my iphone seem relatively stable, though with a noticably lower framerate on the TV than on the phone.
It seems these issues have abated considerably since yesterday's Apple TV update, but are still curious nonetheless and I'm not sure that the update yesterday was specifically meant to address those issues or if I'm just getting a time with less network interference now.
Comcast recently installed a new router/modem/phone combo, replacing our old separate modem and router setup. I'm going to test if putting the network on a different channel helps.

Safari not working on iPad 2 with latest updates

The safari is not working on my ipad 2. It has all the latest updates. When I try to go to an internet site it gives me an error message, "Safari cannot open the page because it could not connect to the server." My other mobile devices are working. I have closed all of the inactive apps, reset the wifi and all of the other things that have been previously suggested, but still not working.

If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. Do not reset your router. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured.

Help printing broke with latest updates

After latest updates, I am getting an error that cgpdftops unexpectedly quit and my printing stops. cgpdftops starts back up with a restart, but then quits again.
I am printing to an HP laserjet 3700 over the network using TCP printing. All current upstates (via software update) were added as of this am. PErmissinos have been repaired.
any help out there?

I, too, am experiencing printer problems after updating to 10.4.6. I have two printers, one is an HP all-in-one attached via usb to an Airport and the other is an (old) HP 4MP LaxerJet attached via Asante via ethernet to a switch. I could print to neither one after updating to 10.4.6. I solved the all-in-one problem by removing the printer, browsing for printers and reinstalling it. I still cannot print to the LaserJet.
In another group, it was suggested that appletalk polling is a problem in OS X and that an OS 9 system on the appletalk net would help - I'll restart my ancient OS 9.1 system and report if it makes any difference.
PowerBook Mac OS X (10.4.6)

Constant ERRORS with CS6 Updates?!

What is the problem with recurring errors EVERYTIME I run the updater for the CS suite? I just ran it for the latest updates and as usual this is what I get...
Update failed. Updates could not be applied...
DPS Desktop Tools CS6 2.03 Update
There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
Adobe Illustrator CS6 Update (version 16.0.1)
There was an error installing this update. Please quit and try again later. Error Code: U44M1I215
Why? Somebody at Adobe care to shed some light on this repetitive annoying issue

This is ridiculous... I just updated the Updater and STILL it will not install the updates properly! Still gives the U44M1I210 error. Is anybody at Adobe working to FIX this problem? I've never seen such an inept updater... It doesn't even proactively update itself but that doesn't even matter because it doesn't work AT ALL.

Port 3689 error with latest update

Similar Messages

Maybe you are looking for