Port 50113 of the SAP MMC
Dear Experts, I have here installed the Enterprise Portal only in JAVA. The version is NW2004s 7.0 Stack 13. I need to close the access to the port http://<server name:50113> to the end user not access it.
How I can do it? Can the experts help me? Thanks
Hi Marcos
1. There is no place in Visual Administrator to close a port just for end users.
2. You had better go for a firewall between portal system and end users. Contact your System Admin / Network Admin. close the port using fire wall settings.
Best Regards
Satish Kumar.
Similar Messages
-
The "J2EE process table" node not visible in the SAP MMC
For Netweaver 7.0 - The "J2EE process table" node not visible in the SAP MMC.
Details for below
SAP Systems Manager
SAP AG
Version: 7100.109.15.8983
Window Xp
Any suggestions would be apperecited.
Thanks
SriniIt's hard to say without seeing the code for TreeTable. But they probably have something like an addNode mothod for the TreeTableNode which will take care of all the updates for you. If you want to do it youself, you will probably have to get the data Model (tree.getModel()???)behind the TreeTable and use one of the fire... methods on it like fireRowChanged(???) or fireTableChanged(???). I would suspect Sun would do it this way.
-
How to make database instances available in the SAP MMC
Hello,
I have been trying to figure out on how to make a database instance, which I installed on the MSSQL Server, available in the SAP Management Console in order to start the instance. I am able to view the instance over the Enterprise Manager of the MSSQL Sever, but I cannot start it from there (this is only possible from the SAP MMC). I have the SAP MMC installed on my computer, but just cannot figure out on how to control the instance from there because I cannot see it.
I hope someone can help me on this matter!
Thanks....
KatharinaHello Katharina,
Run SAP MMC and right-click to SAP R/3 Systems.
Choose properties and go to Fixed tab.
In 'System' field enter Your SID (e.g. EBP)
In 'Instance' field enter hostname<space>instance number (e.g. epb01 10) Remember, there is space between ebp01 and 10.
Click on 'Add' button and then OK.
Best Regards,
Marcin Gajewski -
Regarding Dispacher Stopped on the SAP MMC
Hi Experts,
We Installed SAP PI 7.0 Successfully A long back And it is Running.
Now it is Showing that Dispacher is stopped on the SAP MMC.
What Could be the Reason.
Please Help me
regards
KhannaHi Krishan,
We Restarted it again And then Also it is showing that the same like Dispatcher Stopped.
Here What we did Before it was Stopped is We Removed the BASIS 6.40 .TPZ File from the Server Path And We Imported the BASIS 7.0 .TPZ File into IR.
After This We Restarted the SAP MMC.
Then it is Showing that this Dispatcher Stopped.
Please Help me in This.
regards
Khanna -
SAP MMC Dispatcher disp+work stopped
Dear Friends,
The dis+work process of the SAP MMC remains yellow for some time and then stops.
The developer trace is as below (Due to the character limit a part of the trace is left out) :
=========================================================================
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid J2E
systemid 562 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 236
intno 20050900
make: multithreaded, Unicode, 64 bit, optimized
pid 656
Thu Jan 28 12:06:43 2010
kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 656) [dpxxdisp.c 1287]
shared lib "dw_xml.dll" version 236 successfully loaded
shared lib "dw_xtc.dll" version 236 successfully loaded
shared lib "dw_stl.dll" version 236 successfully loaded
shared lib "dw_gui.dll" version 236 successfully loaded
shared lib "dw_mdm.dll" version 236 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Thu Jan 28 12:06:47 2010
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 4 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5521]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >SAPx64_J2E_00 <
DpShMCreate: sizeof(wp_adm) 29792 (1752)
DpShMCreate: sizeof(tm_adm) 5912704 (29416)
DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
DpShMCreate: sizeof(comm_adm) 552080 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1864)
DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000D2D0050, size: 6614144)
DpShMCreate: allocated sys_adm at 000000000D2D0050
DpShMCreate: allocated wp_adm at 000000000D2D2270
DpShMCreate: allocated tm_adm_list at 000000000D2D96D0
DpShMCreate: allocated tm_adm at 000000000D2D9730
DpShMCreate: allocated wp_ca_adm at 000000000D87CFB0
DpShMCreate: allocated appc_ca_adm at 000000000D882DB0
DpShMCreate: allocated comm_adm at 000000000D884CF0
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 000000000D90B980
DpShMCreate: allocated gw_adm at 000000000D90BA00
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 000000000D90BA30
DpShMCreate: allocated wall_adm at 000000000D90BA40
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
Thu Jan 28 12:06:48 2010
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
<ES> Info: em/initial_size_MB( 8189MB) not multiple of em/blocksize_KB( 4096KB)
<ES> Info: em/initial_size_MB rounded up to 8192MB
Using implementation view
<EsNT> Using memory model view.
<EsNT> Memory Reset disabled as NT default
<ES> 2047 blocks reserved for free list.
ES initialized.
mm.dump: set maximum dump mem to 96 MB
J2EE server info
start = TRUE
state = STARTED
pid = 2584
argv[0] = D:\usr\sap\J2E\SYS\exe\uc\NTAMD64\jcontrol.exe
argv[1] = D:\usr\sap\J2E\SYS\exe\uc\NTAMD64\jcontrol.exe
argv[2] = pf=
SAPx64.ritam.com\sapmnt\J2E\SYS\profile\J2E_DVEBMGS00_SAPx64
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=65000
argv[5] = -DSAPSYSTEM=00
argv[6] = -DSAPSYSTEMNAME=J2E
argv[7] = -DSAPMYNAME=SAPx64_J2E_00
argv[8] = -DSAPPROFILE=
SAPx64.ritam.com\sapmnt\J2E\SYS\profile\J2E_DVEBMGS00_SAPx64
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1694]
***LOG Q0K=> DpMsAttach, mscon ( SAPx64) [dpxxdisp.c 12650]
DpStartStopMsg: send start message (myname is >SAPx64_J2E_00 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
Thu Jan 28 12:06:49 2010
CCMS: start to initalize 3.X shared alert area (first segment).
DpJ2eeLogin: j2ee state = CONNECTED
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 236
Release check o.K.
Thu Jan 28 12:07:28 2010
my types changed after wp death/restart 0xbf --> 0xbe
my types changed after wp death/restart 0xbe --> 0xbc
my types changed after wp death/restart 0xbc --> 0xb8
my types changed after wp death/restart 0xb8 --> 0xb0
my types changed after wp death/restart 0xb0 --> 0xa0
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=489
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Thu Jan 28 12:07:38 2010
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Thu Jan 28 06:37:38 2010
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 1468 Ended no 1 0 0
1 DIA 468 Ended no 1 0 0
2 DIA 1028 Ended no 1 0 0
3 DIA 2660 Ended no 1 0 0
4 DIA 360 Ended no 1 0 0
5 DIA 2160 Ended no 1 0 0
6 DIA 2592 Ended no 1 0 0
7 DIA 2284 Ended no 1 0 0
8 DIA 1568 Ended no 1 0 0
9 DIA 1764 Ended no 1 0 0
10 UPD 1412 Ended no 1 0 0
11 ENQ 704 Ended no 1 0 0
12 BTC 1408 Ended no 1 0 0
13 BTC 3068 Ended no 1 0 0
14 BTC 2324 Ended no 1 0 0
15 SPO 2504 Ended no 1 0 0
16 UP2 2348 Ended no 1 0 0
Dispatcher Queue Statistics Thu Jan 28 06:37:38 2010
===========================
=========================================================================
Recently, a DNS server was set up. Due to some non-SAP issues, the DNS server was uninstalled. Now the application server is not using any domain - simply the default workgroup.
From the trace, it seems like the DNS settings need to be adjusted. since the DNS server is uninstalled, I am not sure what settings need to be adjusted. Any help would be appreciated.
Regards,
TSLog of dev_w0 pasted below.
Regards,
TS
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
M sysno 00
M sid J2E
M systemid 562 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 236
M intno 20050900
M make: multithreaded, Unicode, 64 bit, optimized
M pid 1468
M
M
M Thu Jan 28 12:06:48 2010
M kernel runs with dp version 243000(ext=110000) (@(#) DPLIB-INT-VERSION-243000-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 1468) [dpxxdisp.c 1349]
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M DpShMCreate: sizeof(wp_adm) 29792 (1752)
M DpShMCreate: sizeof(tm_adm) 5912704 (29416)
M DpShMCreate: sizeof(wp_ca_adm) 24064 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/16/552064/552080
M DpShMCreate: sizeof(comm_adm) 552080 (1088)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (104)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1864)
M DpShMCreate: sizeof(wall_adm) (41664/36752/64/192)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 000000000F2D0050, size: 6614144)
M DpShMCreate: allocated sys_adm at 000000000F2D0050
M DpShMCreate: allocated wp_adm at 000000000F2D2270
M DpShMCreate: allocated tm_adm_list at 000000000F2D96D0
M DpShMCreate: allocated tm_adm at 000000000F2D9730
M DpShMCreate: allocated wp_ca_adm at 000000000F87CFB0
M DpShMCreate: allocated appc_ca_adm at 000000000F882DB0
M DpShMCreate: allocated comm_adm at 000000000F884CF0
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 000000000F90B980
M DpShMCreate: allocated gw_adm at 000000000F90BA00
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 000000000F90BA30
M DpShMCreate: allocated wall_adm at 000000000F90BA40
M rdisp/queue_size_check_value : -> off
M ThTaskStatus: rdisp/reset_online_during_debug 0
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
X <EsNT> Using memory model view.
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
X mm.dump: set maximum dump mem to 96 MB
M
M Thu Jan 28 12:06:49 2010
M ThInit: running on host SAPx64
M
M Thu Jan 28 12:06:50 2010
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' ...
B Library 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' loaded
B Version of 'D:\usr\sap\J2E\DVEBMGS00\exe\dbsdbslib.dll' is "700.08", patchlevel (0.211)
B
B Thu Jan 28 12:06:51 2010
B New connection 0 created
C
C DBSDBSLIB : version 700.08, patch 0.211 (Make PL 0.221)
C MAXDB shared library (dbsdbslib) patchlevels (last 10)
C (0.211) MVCC support for MaxDB (note 1332203)
C (0.204) Sapinst on windows/maxdb stop with error (note 1323436)
C (0.202) NUMC conversion corrected (note 1288313)
C (0.189) Default value for max. input variables is 2000 (note 655018)
C (0.189) Profile parameter to define max. input variables (note 655018)
C (0.188) Switch SQLMODE after CREATE INDEX SERIAL (note 1267841)
C (0.188) Input parameters for SQL statements increased (note 655018)
C (0.184) Create index serial for MaxDB 7.6 (note 1267841)
C (0.184) More trace in case of packed to string conversion error (note 1262799)
C (0.182) R3trans export aborts with signal 6 (note 1262245)
C
C
C Loading SQLDBC client runtime ...
C SQLDBC SDK Version : SQLDBC.H 7.6.0 BUILD 007-123-091-175
C SQLDBC Library Version : libSQLDBC 7.6.3 BUILD 009-123-163-622
C SQLDBC client runtime is MaxDB 7.6.3.009 CL 163622
C SQLDBC supports new DECIMAL interface : 0
C SQLDBC supports VARIABLE INPUT data : 1
C SQLDBC supports keepAlive indicator : 0
C INFO : SQLOPT= -I 0 -t 0 -S SAPR3
C Try to connect (DEFAULT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10757 (XUSER error (the USERKEY is unknown))
[dbsdbsql.cpp 113]
C Try to connect (SQLOPT) on connection 0 ...
C *** ERROR => Connect to database failed, rc = -10709 (Connection failed (RTE:Database name is missing))
[dbsdbsql.cpp 137]
B ***LOG BV3=> severe db error -10709 ; work process is stopped [dbsh#3 @ 1203] [dbsh 1203 ]
B ***LOG BY2=> sql error -10709 performing CON [dblink#8 @ 433] [dblink 0433 ]
B ***LOG BY0=> Connection failed (RTE:Database name is missing) [dblink#8 @ 433] [dblink 0433 ]
M ***LOG R19=> ThInit, db_connect ( DB-Connect 000256) [thxxhead.c 1502]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thxxhead.c 10631]
M
M Info for wp 0
M
M pid = 1468
M severity = 0
M status = 0
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M mode_cleaned_counter = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M attachedVm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server SAPx64_J2E_00 on host SAPx64 (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu Jan 28 12:06:51 2010
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10851
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c 730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 261]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 1468) [dpnttool.c 333] -
SAP MMC Java with Solution Manager
Dear experts,
i have installed a SAP Solution Manager 7.0 in WAS ABAP + JAVA in Windows Server 2003 SR2 Enterprise Edition 64 bits + MS SQL 2005.
I try to connect to the SAP MMC in Java (http://localhost:52113/) but i have a message error:
Your browser is completely ignoring the <APPLET> tag!
I already installed the jdk for SAP and x64 (J2sdk version 1.4.2.17 version x64) on http://java.sun.com/j2se/1.4.2/SAPsite/download.html
How can i access?
Thank you in advance
Best regards.
Pascal.Hello,
i found my error: i have installed a jdk but didn't a jre...
Sorry for this thread.
Thank you.
Pascal. -
MMC hangs on Windows 2008 and SAP MMC console not coming up
Hi All,
We are running SAP CRM 7. After upgrading Windows 2003 to Windows 2008 R2, SAP is coming up on our J2ee engine. We are able to login to the SAP J2ee application, but SAP MMC hangs. After the reboot, SAP MMC does come up but it hangs while starting the SAP Server Processes. We have to close the MMC from CTRL-ALT-DEL (end process). After that SAP MMC does not come up. Although, we can number number of MMC.EXE running in task manager,but
the SAP MMC window is not displayed.
We have gone through OSS note Note 1326097 - SAP MMC Snap-In crash for certain operations and installed the new version of MMC. But still the error exists. Also, we have installed the VCREDLIST patch and have installed all the DLLs mentioned in OSS SS Note 684106 - Microsoft runtime DLLs.
Also, the event viewer shows the following message
Log Name: Application
Source: Application Hang
Date: 9/9/2011 8:32:30 AM
Event ID: 1002
Task Category: (101)
Level: Error
Keywords: Classic
User: N/A
Computer: sap-xp-q01.com
Description:
The program mmc.exe version 6.1.7600.16385 stopped interacting with
Windows and was closed. To see if more information about the problem is
available, check the problem history in the Action Center control panel. Process ID: fcc
Start Time: 01cc6f03c402c248
Termination Time: 6
Application Path: C:\Windows\system32\mmc.exe
Report Id: e74f009f-daf8-11e0-afd2-000c29701b8a
Also, we have upgraded the SAP Kernel to the latest patch level and installed MMC latest patch.
Please suggest.
Thanks,
AntarpreetHello,
Try to re-create (re-register) the SAP Services (SAP instance services) in services.msc list. Then try to put SAP MMC up.
Or, after recreation of sap instance services, try to reconfigure the sap mmc as well -
http://help.sap.com/saphelp_nwpi71/helpdata/en/49/0eb43799b4740ee10000000a421937/content.htm
Thanks -
Solution Manger Sap MMC, disp+work process says message server unreachable
Hi Folks, I have installed Solution Manager on Windows 2003, 3GB ram, 300 Gigs, installation completed success fully, after installation i worked on post-installation, like client creation, setting up solution monitoring, logon.._sap* to 0. After I have restarted the solman, in the Sap MMC says dispwork running but message server not connected, and after few moments dispwork stopped.
I think its due to memory allocation for ABAP stack, i searched for this problem, but i didnt find good solution. Any body could sugges me in working out this problem, and also may be in the profiles folder, if there's any thing which i can add parameters for abap/buffer or abap/heap size.
Hope some could try to resolve this.
Thank you.check fist the trace files dev_disp and dev_w0 if you really have a memory problem.
If yes:
- add /3GB /PAE /USEVA:2600 to your boot.ini and restart
- check if you need to rebase DLLs (note 664269 - Rebasing DLLs under WFP)
To avoid all those memory problems I suggest to go for 64bit platform.
Markus -
Msiexec failed with return code 1603 / installing SAP MMC Snap-In and creat
I am installing SAP ABAP trial on windows 7 and I have encountered some problems.
Please help me solve this problem.
Phase 2 : install common system files
Error happened during this step: installing SAP MMC Snap-In and creating shortcuts
Error message:
Running msiexec failed with return code 1603: Schwerwiegender Fehler bei der Installation.
Commandline was msiexec.exe /norestart /L sapmmcX86u.log /i sapmmcX86u.msi /qn
If you want the installer to retry, choose Yes. If you want the installer to abort the installation, choose No.
I have alreday given the permission/rights that are necessary for the user who is installing the system.Hello All,
We also faced the same error, I would like to share the solution steps which we have applied.
Solution :
Refer Note 1236002 - Error during the SAP MMC MSI installation or uninstallation
As per the note :
Download utility “Microsoft Fix It” from http://support.microsoft.com/mats/Program_Install_and_Uninstall
You have the option to run this utility online or you can download the folder structure following the instructions on this page
Then copy the Fix it Portable folder to the computer with the problem and run the Launch Fix it application
What Microsoft Fix It fixes...
Removes bad registry key on 64 bit operating systems.
Windows registry keys that control the upgrade (patching) data that become corrupted.
Resolves problems that prevent new programs from being installed.
Resolves problems that prevent programs from being completely uninstalled and blocking new installations and updates.
Use this troubleshooter for an uninstall only if the program fails to uninstall using the windows add/remove programs feature.
Best Regards.. -
Reconnecting J2EE engine to SAP MMC / NWDS
Hi,
I lost the connection to my local J2EE engine. I believe we accidently changed the password or we are locked out of the engine because of unsuccessful login attempts.
Is there anyway to make the connection back to the SAP MMC and/or to NWDS without having to reinstall the J2EE engine?
Any help you can give is appreciated.you can use config tool for more info check this link:
Re: NetWeaver portal administrator user account (UME) locked
reward points if possible -
A4H and HDB systems not starting in SAP MMC for BW on HANA trial
Hi,
I followed all the steps to create an account in AWS and activate a trial version of SAP BW 7.4 on HANA and SAP BO 4.1. The instance activated correctly in the SAP CAL with a green status. The instance was created in the region us-east-1c. I am currently in Australia.
But when I logon with the remote desktop, and go to the SAP MMC, I see that the A4H and HDB systems have not started and are not green. When I try to start them manually I get the error below. Please help. My SDN userid is P052405.Hi All,
The error was fixed after I rebooted the instance in the SAP CAL. -
I cant see any thing any SAP MMC for my XI server.
Hi All,
I cant see any thing any SAP MMC for my XI server.
I checked the services SAPXID_00 and SAPXID_01, those sevices were not running. when i try to start the service I am getting error 1067: The process terminated unexpectedly. I have uninstalled and reinstalled the service with sapstartsrv.exe but no luck.
I have also check SAP Note 82751
when i checked the log sapstartsrv.log, I saw this error
MSETCLXIDEV\xidadm is starting SAP System at 2011/01/17 16:16:47
SAP HA Trace: FindClusterResource: OpenCluster failed: 1753 [sapwinha.cpp, line 212]
SAP HA Trace: SAP_HA_FindSAPInstance returns: SAP_HA_FAIL [sapwinha.cpp, line 907]
Error: 13, Open Logging-File "sapstart.log". EACCES*: Permission denied OR: The data is invalid.
Please help to resolve this issue.
Thanks
Rehan
Edited by: Rehan Manzoor on Jan 19, 2011 12:39 PMHi,
Is it that there is no entry in SAP MMC for the system? Can you try to manually add the System in SAP MMC and check?I or is it that the system is already added and there is no info in SAP MMC. It is possible that the MMC is not working properly. You can reinstall the SAP MMC or better install the latest one. If the SAP MMC is not the issue here then it is possible that tthere is a some permission issue involved here.Could you check the whether the user with which the services are being started have correct permissions or not.
I had an issue where my SAP MMC was installed in a windows system and my SAP system was in Linux(Redhat). And because of the firewall and a security feature called SElinux my SAP MMC was not showing any information.There was a similar issue where i had to upgrade the LM tools. You can download the latest Lifecycle management software from SMP.
Regards,
Jyotish -
SAP MMC, DISPATCH AND DATABASE STOPPED ; PLS HELP
Hi,
<b> I was trying to stop JDBC connector in Visual Administrator and after that whn I restarted the server, in the SAP MMC it shows that database and dispatcher is stopped , can anyone guide me how to restart the database and dispatcher again,</b>
Thanks in advance,
Sunil K Shetty.
Bangalore.Hi
Go through these links for more info:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/97a4f439-0d01-0010-d488-d29b45e2f5ab
http://help.sap.com/bp_bpmv130/Documentation/Planning/HighAvailability.pdf -
SAP MMC not showing SID after sap gui install and reboot of the server
Hi, after SAPGUI 7.10 install on our server and rebooting of the same, SAP MMC says u201CMMC could not create the snap-inu201D.
We are desperately trying to find a solution. We did the following: Uninstalled the gui.
1) Uninstalled the SAPMMC snap-in
2) Re-installed it with the sapmmc_2-20005866.msi.
3) This automatically created all the required dlls..especially the main ones ..sapmmc.dll, sapstartsrv.exe in c:\WINDOWS\system32
4) Copied librfc32.dll from a working system to c:\WINDOWS\system32 of the system that is having issues
5) Did the registry setup, by doing REGSVR32 sapmmc.dll, and further did sapstartsrv -t and re-created the service with the following parameters:
<SID>
01
START_D*_hostname
.\SAPService<SID>
Password:*****
6) All the services are up and running.
7) Also did a re-boot, just to check if the registry update needed it, for the changes to be active.
Still facing the same issue "SAP MMC could not create the snap-in"
Any input is appreciated.
Thanks and regards,
RS.Hi,
Check your "Input locale" might not be compatible with "System locale".
Let us know if this information is useful to you.
with regards,
Parin Hariyani -
SAP MMC error - MMC Could not create the snap in
I installed 3 new instances on a new server, and i get the following errors.
MMC Could not create the snap-in
MMC could not create the snap-in, the snap-in might not have been installed correctly.
Name SAP System Manager
CLSID: {633547ee-A302-11D1-Ae59-080009b07dbb}
Any Ideals.Hi,
I got the exactly the same error. I installed GUI 7.10, and I installed the latest MMC but during installation of MMC was prompted that current version is allready newer.
Do you got some more specific answer on how did you solve this issue?
Thanks!
Best regards,
Jacco Raymakers.
Maybe you are looking for
-
Clamshell Mode Prevents Waking from Sleep
I've got a MacBook Pro (Intel, 2.33GHz) running 10.5. Since installing Leopard I've been bumping into periodic issues with trying to wake from sleep while in clamshell mode. (I've got a Samsung LCD monitor and a USB keyboard plugged into it, and most
-
HI, i am trying to insert values in jsp into mysql database using beans....... but it doesn't shows any error or it doesn't inserts the value.. can any body help me out . abdul
-
Does J2ME support introspection?
Does J2ME support introspection?
-
Outgoing mail gets rejected by server
my outgoing mail wont go. say the recipient was rejected by server
-
Is intel iris pro powerful enough
Is intel iris pro powerful enough for graphic intensive programmes such as auto cad , sketch up and final cut?