Port 6667is blocked by my firewall,before there was no problem using this how do i fix it
hi.i have been using a site for a while now and my firewall has been on ,today i went to that site and the chat feature and it say's port 6667 is blocked by the fire wall,how do i repair this
This is a typical response from the manufacturer. Did you try the fix that Lawrence mentioned. When Apple or any other phone manufacturer update phone software, they have the latest Bluetooth installed. It is usually the problem with the radio manufacturer that they devices are using the older Bluetooth protocols. You can try this support document http://support.apple.com/kb/TS3581 and see if anything there helps, but generally it requires the radio manufacturer to update their firmware.
Similar Messages
-
Message - There was a problem reading this document (57)
Anyone else have this problem?
Purchased version of Windows 32 bit version of Acrobat XI update will not install properly or work.
First error info message is as per title after initial red screen which only appears once.
Second error info message is verify operation failed.
2 downloads, 3 installs and 2 repairs produce same result.
Adobe Australia called three times on 1800614863 but only automated selections 322323 made and transfer promised.
First call at 0901 local time.
All calls placed on hold first two timed out.
31 minutes into third call got an answer from a man in India.
In answer to my question:
Are you receiving reports of problems installing purchased upgrade versions of Acrobat XI Pro?
The answer was No.
He took details of messages and offered to help but I declined.
I have purchased and used all Acrobat Pro upgrades since 6.
Complete installation attempted.
Being done on a clean install of Windows XP SP3 on an OQO02 with only other program installed Office 2007 SBE.
Message was edited by: OQOroger to reflect inability to connect to seller Adobe Australia. Also Adobe site can't stay on Australia but reverts to USA. Full price of $A282 paid. USA purchasers only pay $US199 ($A191.57 at present exchange rates.) Credit card account already debited for purchase made yesterday. Subject line corrected 'as' changed to 'was'.
Message was edited by: OQOroger Corrected the price paid and currency conversion amount to show extra paid by Australians for 'local' support (from India). Added 'Message -' to title to make it less cryptic.
Message was edited by: OQOroger Typical setup installation results in same problems except
'There was a problem reading this document (57)'
window does not appear.
First window displaying and asking for acceptance of license conditions has no bottom section when first displayed so there is no way to accept these conditions except to close this window (confirm window appears) and launch program again when bottom panel is displayed.Despite my advice of some of the many faults I have experienced with Acrobat XI Pro, Adobe support has never asked me to provide a 'Systems Report' which is available under the 'Help' tab.
This report indicates:
'Installed Acrobat: C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:44 PM'
So if anyone has a working version other than 379 please let me know.
Complete 'Systems Report' is in a window named 'System Information' as is set ot below.
From first window
Adobe Acrobat Pro
menu
Help/Online Support/Generate System Report
returns window
System Information
with 2 parts
'System Parameters' and 'Installed Plug-ins'
first part details:
System Parameters
Account Detail:
User Rights: Admin
User Account Control: Undefined
Process Integrity: Undefined
Profile Type: None
Acrobat Detail:
Sandboxing: Off
Captive Reader: No
Multi-Reader on Desktop Support: Off
Available Physical Memory: 530036 KB
Available Virtual Memory: 1993360 KB
BIOS Version: OQO - fe60019
Default Browser:
Default Mail: Microsoft Office Outlook
mapi32.dll
Version: 1.0.2536.0 (XPClient.010817-1148)
Display Detail:
Screen Width: 800
Screen Height: 480
Number of Monitors: 1
Number of Mouse Buttons: 8
Has Mouse Wheel: Yes
Has Pen Windows: No
Double Byte Character Set: No
Has Input Method Editor: Yes
Inside Screen Reader: No
Graphics Card: VIA/S3G UniChrome Pro II IGP
Version: 6.14.10.385
Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:44 PM
Locale: English (Australia)
Monitor:
Name: VIA/S3G UniChrome Pro II IGP
Resolution: 800 x 480 x 60
Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 3
Page File Space: 2203236 KB
Processor: x86 Family 6 Model 10 Stepping 9 CentaurHauls ~1496 Mhz
Session Detail:
Boot Type: Normal
Is Shutting Down: No
Network: Available
Inside Citrix: No
Inside VMWare: No
Remote Session: No
Remote Control: No
System Name: YOUR-1561454D88
Temporary Directory: C:\DOCUME~1\OQOuser\LOCALS~1\Temp\
Time Zone: Pacific Standard Time
Total Physical Memory: 911792 KB
Total Virtual Memory: 2097024 KB
User Name: OQOuser
Windows Detail:
Tablet PC: No
Starter Edition: No
Media Center Edition: No
Slow Machine: No
Windows Directory: C:\WINDOWS
Installed Plug-ins
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:52 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\AcroForm.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Annots.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\DigSig.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\EScript.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:52 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\IA32.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:52 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\PPKLite.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\SendMail.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:54 PM
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 8:43:54 PM
I can easily see 2 matters which an inexperienced support desk staff member could home in on.
Acrobat XI Pro system requirements include
1024x768 screen resolution and
Internet Explorer 7, 8, 9, or 10; Firefox Extended Support Release; Chrome
Well my OQO report above includes
Display Detail:
Screen Width: 800
Screen Height: 480
and leaves blank
Default Browser:
(actually Firefox 17.0.1)
Yet 'Firefox Extended Support Release' is described by
Mozilla:
'Who is it not for?
Individual users who always want the latest features, performance enhancements and technologies in their browser without waiting for them to become available in ESR several development cycles later.'
http://www.mozilla.org/en-US/firefox/organizations/
Since starting this post, I loaded Adobe Acrobat XI Pro on another similar computer I own and use regularly. This was in a dock and connected to an external display. Same problems and reports experienced.
'Systems Report' for this installation follows:
Account Detail:
User Rights: Admin
User Account Control: Undefined
Process Integrity: Undefined
Profile Type: None
Acrobat Detail:
Sandboxing: Off
Captive Reader: No
Multi-Reader on Desktop Support: Off
Available Physical Memory: 614280 KB
Available Virtual Memory: 1988144 KB
BIOS Version: OQO - fe60019
Default Browser:
Default Mail: Outlook Express
%ProgramFiles%\Outlook Express\msoe.dll
Version:
Display Detail:
Screen Width: 1280
Screen Height: 1024
Number of Monitors: 1
Number of Mouse Buttons: 8
Has Mouse Wheel: Yes
Has Pen Windows: No
Double Byte Character Set: No
Has Input Method Editor: Yes
Inside Screen Reader: No
Graphics Card: VIA/S3G UniChrome Pro II IGP
Version: 6.14.10.358
Check: Not Supported
Installed Acrobat: C:\Program Files\Adobe\Acrobat 11.0\Acrobat\Acrobat.exe
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 20:43:44
Installed Acrobat: C:\Program Files\Adobe\Reader 10.0\Reader\AcroRd32.exe
Version: 10.1.3.23
Creation Date: 2012/04/04
Creation Time: 16:53:54
Locale: English (United Kingdom)
Monitor:
Name: VIA/S3G UniChrome Pro II IGP
Resolution: 1280 x 1024 x 60
Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows XP Professional
OS Version: 5.1.2600 Service Pack 3
Page File Space: 2006176 KB
Processor: x86 Family 6 Model 13 Stepping 0 CentaurHauls ~1496 Mhz
Session Detail:
Boot Type: Normal
Is Shutting Down: No
Network: Available
Inside Citrix: No
Inside VMWare: No
Remote Session: No
Remote Control: No
System Name: OKETT143
Temporary Directory: C:\DOCUME~1\oqo\LOCALS~1\Temp\
Time Zone: AUS Eastern Standard Time
Total Physical Memory: 911792 KB
Total Virtual Memory: 2097024 KB
User Name: oqo
Windows Detail:
Tablet PC: No
Starter Edition: No
Media Center Edition: No
Slow Machine: No
Windows Directory: C:\WINDOWS
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Accessibility.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 20:43:52
C:\Program Files\Adobe\Acrobat 11.0\Acrobat\plug_ins\Updater.api
Version: 11.0.0.379
Creation Date: 2012/09/23
Creation Time: 20:43:54
(I did not bother installing plug-ins and deactivated installation before removal of program.)
With 5 installs producing the same error reports, I am convinced Acrobat XI Pro won't work for me on my computers and have little confidence of useful support from Adobe.
THERE ARE SO MANY GLARING PROBLEMS WITH MY INSTALLATIONS WITH THE SUPPORT DESK'S RESPOSES UNHELPFUL AND UNINFORMED. I REALLY DON'T ENJOY DOING ADOBE'S QUALITY CONTROL FOR THEM FOR FREE, BUT I CONTINUE TO POST HERE IN THE HOPE THAT SOMEONE WITH REAL AUTHORITY WILL EVENTUALLY TAKE NOTICE AND ARANGE A FIX OF THE PROBLEMS.
15 Dec 2012 1409 local time.
Further feedback provided that 1Ghz memory preferred. Problem not addressed. Reply
Notes from Customer
Friday, December 14, 2012 7:07:57 PM PST
System reports at #12 on http://forums.adobe.com/message/4862987#4862987
Alert- although ordered in Australia from Australian site and paid in Australian dollars by MasterCard, Adobe chose without warning to process this payment through an overseas account incurring an extra foreign transaction charge for me.
Adobe support to date has been of no use and their billing practices unreasonably expensive. -
There was a problem reading this document (118) after sleep
Adobe reader X 10.1.8.24, windows 7 64 bit
I have a lot of pdf documents located on a remote windows share and everytime I put my computer to sleep and wake it up I get problems reading pdf documents that result in this error:
There was a problem reading this document (118)
Then I have to close ALL pdf documents and re-open them to be able to read them again.
This has happened for a long time now, with multiple reader versions and it really starts to bother me. Other applications just pick up the remote files where I left them before putting the pc to sleep. The reader should be able to retry getting the data from the remote share.
Where do I report this bug?
Jur.Sorry, I do not quite understand what your problem is:
you have a problem with signing in to the ExportPDF service ?
you have a problem opening PDF files ? If so, are these local or online documents?
P.S. Reader XI and earlier will no longer support Document Cloud PDF services as of May 20; see https://forums.adobe.com/docs/DOC-5891 -
There was a problem downloading this book.
I just bought a book, and 4 free classics, and none of them will download. The blue bars fill up on all of them, but then the "There was a problem downloading this book" dialog comes up, and gives me the option of retrying now or later. I tried redownloading them, but this also creates an error dialog. Is there a way to clear out the half downloaded books and try again?
There is basically only one solution- to contact iTunes via the iTunes Store and then you can tell them that there was an error downloading the books and then they can send you a different copy to your computer. Here is how you do this:
-Open iTunes
-Go into the iTunes Store
-Click on your account on the top right corner and sign in
-Click on 'Purchase History'
-Scroll to the bottom and press 'Report a Problem'
-Click on the purchase date
-Select the item(s) you were having a problem with
-Tell Apple about the problem.
Believe me, I know that it is a pain. The same thing has happened to me before, however Apple responds pretty quick and they are very good about resolving the issue. -
There was a problem deregistring this iphone with icloud
There was a problem deregistring this iphone with icloud?
This feature has been introduced to make stolen phones useless to those that have stolen them.
However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again. -
There was a problem deregistering this iphone with icloud
hi...
i have big problem with this
i have iphone 6 plus...i did mistake and i created new icloud account with my phione and i forget to active it but i inserted inside of my iphone..
the find my iphone is on..
now i activated my icloud account but it tell my no device connected but it is still in my iphone and when i want to sign out
from my phone it tell me :
there was a problem deregistering this
iphone with icloud.
try deleting your account again
what can i do with this?
i want to restore my iphone to latest version and i have this trouble.Backup to computer first and sync Apps to iTunes first!
Restore in recovery mode will work, be persistent and retry
Recovery restore challenges
- computer didn't detect recovery iphone, attempted and failed 3 times
rebooted computer then recovery restore worked
- recovery restore was successful, unlocked, and iMessage/Facetime, Find My Iphone, ALL WORKS!
Restore from backup challenges
* Make sure you have plenty of harddrive space!
- have to restore first then restore from backup, i did this incorrectly by restoring from backup and the find my iphone feature got stuck forcing me to recovery restore
- each restore from backup attempt will copy the original backup and create another backup folder. My original was about 10gb, so it copied another 10gb onto my computer's harddrive
- when i restore from backup, my computer ran out of space and errored out/failed.
- I tried again to restore from backup then figured out where the backup data folder was and tried to transfer to external harddrive but not quick enough and failed again.
- finally cleared the extra backup data files and restore from backup was successfull
Missing apps from restore from backup
- Downloaded all my missing Apps from APP store
- I have 300+ apps and there are only 15 screen scrolls, have to organize before apps will populate and load, very difficult to organize now. Wished I had sync Apps first.
Conclusion
This process took me literally 20+ hours to correct and will probably take me few more hours to organize the apps into their respective folders...
At least I got everything to work. Hope this helps! -
I want to sign out my icloud account but I can't. When I try sign out, I received notification " Cannot Delete iCloud Account - There was a problem deregistering this iPhone with iCloud. Try deleting your account again"
Backup to computer first and sync Apps to iTunes first!
Restore in recovery mode will work, be persistent and retry
Recovery restore challenges
- computer didn't detect recovery iphone, attempted and failed 3 times
rebooted computer then recovery restore worked
- recovery restore was successful, unlocked, and iMessage/Facetime, Find My Iphone, ALL WORKS!
Restore from backup challenges
* Make sure you have plenty of harddrive space!
- have to restore first then restore from backup, i did this incorrectly by restoring from backup and the find my iphone feature got stuck forcing me to recovery restore
- each restore from backup attempt will copy the original backup and create another backup folder. My original was about 10gb, so it copied another 10gb onto my computer's harddrive
- when i restore from backup, my computer ran out of space and errored out/failed.
- I tried again to restore from backup then figured out where the backup data folder was and tried to transfer to external harddrive but not quick enough and failed again.
- finally cleared the extra backup data files and restore from backup was successfull
Missing apps from restore from backup
- Downloaded all my missing Apps from APP store
- I have 300+ apps and there are only 15 screen scrolls, have to organize before apps will populate and load, very difficult to organize now. Wished I had sync Apps first.
Conclusion
This process took me literally 20+ hours to correct and will probably take me few more hours to organize the apps into their respective folders...
At least I got everything to work. Hope this helps! -
HelloThank's for your helpsI hope this document is helpfulBest Regards,
Date: Sun, 22 Jun 2014 17:10:17 -0700
From: [email protected]
To: [email protected]
Subject: when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help me th
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ? if you can help m
created by Anoop9178 in Adobe Reader - View the full discussion
Hi,
Would it be possible for you to share the document?
Regards,
Anoop
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6485431#6485431
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Reader by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
There was an error processing a page. there was a problem reading this document (110)?
hi
my name is kapil and i am trying to open one (which is downloded) pdf document.which giving me an error as there was an error processing a page. there was a problem reading this document (110) for some page only. i am using acrobat reader x. is it any 3d setting or any thing else please give me an idea. i am waiting for replay as soon as possible...........
your sincerely
KAPIL TRIVEDIWhen I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
There was a problem reading this document (117)
Dear Designers
I am facing a strange problem while doing test presentment in Adobe output designer. When i do a test presentment with my dat file which is meant for fax (^job newFax -fform01F.MDF) , i see the pdf (consist of 2 pages ) but as soon as i scroll down to next page (Pg 2) of my pdf ; it giving me a Adobe reader error pop up "There was a problem reading this document (117)" and when i click OK and comes to page 2 (i'm seeing the content of Pg2 curerntly) and scroll back to page 1 the data on page 2 goes blank. What could be the possible reason for this ? I assume the flaw is on Adobe reader side , but please brighten me with the knowledge if there is some issue on dat file side.
Any possible guidance or help would be highly appreciated
thanks
jaYSorry, I do not quite understand what your problem is:
you have a problem with signing in to the ExportPDF service ?
you have a problem opening PDF files ? If so, are these local or online documents?
P.S. Reader XI and earlier will no longer support Document Cloud PDF services as of May 20; see https://forums.adobe.com/docs/DOC-5891 -
THE FAMOUS ERROR: There was a problem reading this document (15) - Thanks Adobe Engineering team
As a result of this error, I cannot delete pages in a big PDF file I have of 1032 pages.
The error, famous on the web and in Google, is:
there was a problem reading this document (15)
I hope I can find a solution for this, because I cannot delete the unnecessary pages inside the document which is driving me crazy.
Adobe Acrobat X has a very poor quality testing. In fact I don't beleive Adobe test their products, I think they just program them, label them as the finished product, ASK FOR A HIGH PRICE, OF COURSE, and release them to the market creating a lot of nightmares and headaches to the customer.
Adobe Acrobat X crashed several times when the files have flash content inside or formularies. The program, simply, is bad programmed with a very poor engineering inside.
As soon I find an alternative for PDF, I will switch, I promise, in fact I don't promise it, I SWEAR IT.
And if I dont find a solution for this I will put in my car a banner that says "DON'T BUY ADOBE ACROBAT, IS THE WORST PROGRAM YOU CAN FIND!"
I'm loosing days and days of work, this is costing me problems and money.Yes, there is something wrong with the document. That is the defective programming the Adobe engineering team did. And please, allow me to explain you why it is defective. After you spend millions dollars in 950 engineers and 3100 beta testers, you can destroy Adobe Acrobat X easily just downloading a website rich in flash content. Some animated banners in the downloaded pages from the web, it's enough to destroy it.
Just go to a website where you have animated banners, and press Shift+Crtl+O to download the pages...
Save your PDF document and then try to work with it.
If the document has a big size, let's say 1000 pages approximately, and many of them have flash content... Adobe Acrobat X crash automatically just moving from one page to another.
As simple as that.
Is the most unstable program I've seen in all my life. And please, don't tell me it's my machine, because I've tested it in other computers. The same!
But there is more! yes
Forms fields also destroy Acrobat X
In a big PDF file having several pages inside with forms, just go to Tools, Forms and Edit, then in the list of pages try to delete the forms fields selecting them and pressing the Del key... crasshhhh Acrobat X die.
What kind of betatesters you chose to test your products? For sure are people that are working with light documents of 5... 10 pages and no more.
For sure are not people working extensively with Adobe Acrobat, as I do.
And what happens when Acrobat X crash miserably time after time? that the Error 15 comes, because the file becomes corrupted.
This is not serious.
Is this the kind of performance and stability that Acrobat provide to the customers? having the risk to lose important documents and data, due how unstable is the program?
You can tell me you hired NASA personnel to do this program, but customers need results, and crashing the program just pressing one key is not serious.
And talking about complains I don't want to remember the last update of the Acrobat 9 !!!
And you know what? a simple tool as NitroPDF don't crash!
Sadly NitroPDF is not an option for me, because I embed videos in the PDF documents and NitroPDF don't allow me that.
I am using Adobe Acrobat X because sadly I don't find another alternative, the day I find it, I'll switch for sure.
Or perhaps we can get a miracle, and your programmers could focus in what is IMPORTANT: STABILITY AND PERFORMANCE. -
Error message: There was an error processing a page. There was a problem reading this document (110)
I opened a pdf document in Adobe Reader X. When I attempted to scroll through the pages the following error message appeared, “There was an error processing a page. There was a problem reading the document (110). After an Internet search to try to find the reason for the error and a solution, I came across a site that suggested it was an issue regarding the fonts of the document. I then reopened the document and went into the document’s font properties (FILE – PROPERTIES – FONTS tab). There I noticed that the “Gathering font information” stopped at 2% which, of course, I took to mean that Adobe Reader X was having a difficult time in loading the font’s information. Another site suggested opening the document in the pdf reader, Foxit. So I did, and the document loaded properly with no error messages. I was still curious as to why the document did not load entirely in Adobe Reader X and if the same problem would occur using a different reader. I then downloaded the pdf reader, Nitro Reader 2. I opened the same document and initially received the following message, “The requested page number is invalid and does not exist in this document.” I closed the message and proceeded to scroll through the document. As I scrolled, the following message appeared, “This file was damaged (corrupted) and has been repaired.” I thought, “Wonderful!” I then chose <FILE – SAVE AS – PDF DOCUMENT> and saved the “repaired” document under a new name. When I opened the “repaired” document with Adobe Reader X, behold, the document opened entirely with no error message. I was curious, so I went into the document’s font properties and noticed, this time around, that the “Gathering font information” loaded to 100%. Nitro Reader 2 detected the error and fixed it. Now I’m left to wonder…why wasn’t Adobe Reader X able to do the same? I hope this post helps others who are experiencing the same issue.
When I encountered an error "there was a problem reading this document 110" in Acrobat Pro 11 on 28.7 MB CS6 file, it indeed was very frustrating.
I solved my problem, but since I don't know which step benefitted me, I've to enumerate all the steps I took:
Read below:
1.1. I could copy the file anywhere on the drive, but couldn't 'save as' from Acrobat Pro.
1.2. No document security was applied of any sort on the file.
1.3. Still in the first tab of the document properties, all details under advance section were empty. No 'PDF Version' 'location' 'file size' etc were populated. Nothing.
1.4. I couldn't change and save anything in any of property dialogue. I could comment on the text, but as soon as I tried to save, it gave an error (some sort of 'File reading' error).
1.5. When I tried to extract a page (I tried many), it gave 'reading error'.
1.6. I didn't try 'splitting error'. Since I was 100% sure, it'll give me same reading error.
1.7. I opened the file in Firefox and tried saving it as pdf from there. But no error, but no save either.
1.8. I ran 'Remove Hidden Information' from protection panel without any errors.
1.9. I tried 'sanitize document' from the same tab, but didn't succeed.
1.10. Then (here I think the problem was resolved), from Document Processing panel, I did some commands. 1st, 'Export all images', successfully. Then 'Remove all links', it found 0.
1.11. Then in 'print production' panel, I clicked/tried to open acrobat distiller. The same opened, did some processing. But I don't know if it did something in solving the problem or not.
1.12. Although I think my problem was resolved till now, but the last step I did was 'Saved As' the file (from the file menu) as a .ps file. Though I've not yet reopened/used that ps file (to convert it into a pdf file again). But around here I wanted to close the file and it asked me whether I wanted to save the file, I said yes. And it saved the file correctly. And I checked that in properties dialogue, the missing information was populated too.
1.13. Sorry for so lengthy instructions, but I had no choice. -
when i open pdf file it open all the pages but some pages give error massage (there was error processing a page,there was a problem reading this document 110) but if i open this page which give me error with google chrome it's work ?
if you can help me thank's
[email address removed by host]thank's for reply and your help
i did the step's that you told me but i still have the same problem
i have the latest v.11.0.7
i
i disable the protected mode -
How can I solve a Parse Error: "There was a problem parsing this package"
Hello;
I developed a really simple app in Flash Pro CC for android. I published it using AIR 13.0 for Android. When I tried to install it I received the Parse Error: "There was a problem parsing this package"
Im not sure if the problem has something to do with my app xml file, but here it is:
<?xml version="1.0" encoding="UTF-8"?>
<application xmlns="http://ns.adobe.com/air/application/13.0">
<id>TOeatorNOTTOeat</id>
<versionNumber>1.0.0</versionNumber>
<versionLabel>TouchEvent</versionLabel>
<filename>TO eat or NOT TO eat</filename>
<description/>
<name>TO eat or NOT TO eat</name>
<copyright/>
<initialWindow>
<content>TO%20eat%20or%20NOT%20TO%20eat.swf</content>
<systemChrome>standard</systemChrome>
<transparent>false</transparent>
<visible>true</visible>
<fullScreen>true</fullScreen>
<aspectRatio>landscape</aspectRatio>
<renderMode>gpu</renderMode>
<autoOrients>false</autoOrients>
</initialWindow>
<icon>
<image36x36>icons/icon36x36.png</image36x36>
<image48x48>icons/icon48x48.png</image48x48>
<image72x72>icons/icon72x72.png</image72x72>
<image96x96>icons/icon96x96.png</image96x96>
</icon>
<customUpdateUI>false</customUpdateUI>
<allowBrowserInvocation>false</allowBrowserInvocation>
<android>
<manifestAdditions>
<![CDATA[<manifest> </manifest>]]>
</manifestAdditions>
</android>
<supportedLanguages>en</supportedLanguages>
</application>
What do you think is the best to check?i don't see any problem with your manifest.
try saving your fla and the published files to a new directory and see if the error resolves. -
Error:There was an error processing a page. There was a problem reading this document (129)
System: Windows 7 64-bit
Adobe Acrobat Pro X
Client received a pdf file and gets this message when try to open it.
I test it on my PC which is using Acrobat standard (same system) and gets the same error. Did some research on Internet and this message with the code 129 is rare.
Please help and thanks in advance.
FengThanks Guys.
The file she was trying to open was created by herself days ago, I asked client to open previous file version and she can open it.
So that means the conclusion you guys made is correct.
But she is getting another error message when sha trys to save a different file:
"The dicunent could not be saved. There was a problem reading this document (14) "
Any ideas?
Thanks
Maybe you are looking for
-
Problems with Hotspot after upgrading to OS 10.3.1.1565
SInce i have upgraded the OS to the lastest version on my Q10, the Hotspot has stopped working. Previously it was was working absolutely perfectly. I have checked other support forums and a lot of users are facing the same problem after upgrading to
-
I have an iMac G4 PowerPC with OS 10.5.? After deleting 17G of music files to make room on the 74G drive, The iPhoto and iWeb updates seemed to load okay, but the OS 10.5.8 update failed - message opened said the computer encountered an error and mus
-
I tried to purchase a free app, but a window continues to pop up saying that my Apple ID has been disabled. What do I do? I tried resetting my password but that did not work. Thanks
-
Problems to compile kde-18n-es (kde 3.4.0 rc1)
descompress and execute ./configure say this: ./configure checking for a BSD-compatible install... /bin/install -c checking for -p flag to install... yes checking whether build environment is sane... yes checking for gawk... no checking for mawk...
-
I created my Apple id successfully. I can logon to Apple acct. But, cannot logon to icloud acct. Any suggestions?