Port 80 has been used,
hi, i am using Filemaker, at the begining it works well with port 80. but when i try to start some other software, the port has been automatically switched and thus filemaker is now no loger work with port 80. my mamp works with port 800. i dont know which software occupied the port 80. help me, pls. thx
Apache Web Server by default uses port 80.
Similar Messages
-
Hi,
I am uninstalling my messaging 5.2 using ./uninstall. After uninstall process completed, i used rm -R to manually remove the ims folder. Then I tried to install messaging again but half way of the installation it will show me that pop, imap and smtp port has been used, i need to assign other ports to them. If i continue to use default ports, it will prompt me the ports have been used, but if i assigned other ports to them, the installation can complete successfully.
May I know what is happening? I have checked /etc, there is no msgregistry.inf file. What other files that should i remove? Please help.. thank you.The problem is that the software is probably still running from your previous install attempt. You can telnet to one of the ports to see if this is the case, e.g.
telnet <mailserver> 110Should return something like:
Trying 111.222.333.444...
Connected to mail.siroe.com.
Escape character is '^]'.
+OK mail.siroe.com POP3 service (Sun Java(tm) System Messaging Server 6.2-4.03 (built Sep 22 2005))If that is the case, do a ps -fu <mailserveruser> and kill -9 the processes returned.
Michael
Hi,
I am uninstalling my messaging 5.2 using ./uninstall.
After uninstall process completed, i used rm -R to
manually remove the ims folder. Then I tried to
install messaging again but half way of the
installation it will show me that pop, imap and smtp
port has been used, i need to assign other ports to
them. If i continue to use default ports, it will
prompt me the ports have been used, but if i assigned
other ports to them, the installation can complete
successfully.
May I know what is happening? I have checked /etc,
there is no msgregistry.inf file. What other files
that should i remove? Please help.. thank you. -
8080 port has been used,why?
windows and solaris both has this problem.thanks a lot.
D:\j2sdk1.4.0\bin\javaw.exe -Djava.endorsed.dirs=D:\Program Files\Apache Tomcat 4.0\bin;D:\Program Files\Apache Tomcat 4.0\common\lib -Dcatalina.base=C:\Documents and Settings\Administrator\.IntelliJIdea\system\tomcat_GetDemo_8c6d0204 -Dcatalina.home=D:\Program Files\Apache Tomcat 4.0 -Djava.io.tmpdir=D:\Program Files\Apache Tomcat 4.0\temp -classpath D:\j2sdk1.4.0\lib\tools.jar;D:\Program Files\Apache Tomcat 4.0\bin\bootstrap.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\jndi.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\activation.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\jdbc2_0-stdext.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\jta-spec1_0_1.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\tyrex-0.9.7.0.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\naming-common.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\naming-resources.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\mail.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\xerces.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\servlet.jar;D:\Program Files\Apache Tomcat 4.0\common\lib\tools.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-default.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-http11.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-common.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\catalina.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-webdav.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-invoker.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-coyote.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-util.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\warp.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\jakarta-regexp-1.2.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\commons-logging.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\tomcat-ajp.jar;D:\Program Files\Apache Tomcat 4.0\server\lib\servlets-manager.jar;D:\j2sdk1.4.0\jre\lib\charsets.jar;D:\j2sdk1.4.0\jre\lib\jaws.jar;D:\j2sdk1.4.0\jre\lib\jce.jar;D:\j2sdk1.4.0\jre\lib\jsse.jar;D:\j2sdk1.4.0\jre\lib\rt.jar;D:\j2sdk1.4.0\jre\lib\sunrsasign.jar;D:\j2sdk1.4.0\jre\lib\ext\dnsns.jar;D:\j2sdk1.4.0\jre\lib\ext\ldapsec.jar;D:\j2sdk1.4.0\jre\lib\ext\localedata.jar;D:\j2sdk1.4.0\jre\lib\ext\sunjce_provider.jar;D:\j2sdk1.4.0\jre\lib\ejb10deployment.jar;D:\j2sdk1.4.0\jre\lib\j2ee-ri-svc.jar;D:\j2sdk1.4.0\jre\lib\j2ee.jar;D:\j2sdk1.4.0\jre\lib\j2eetools.jar;D:\j2sdk1.4.0\jre\lib\jhall.jar;D:\projects\classes org.apache.catalina.startup.Bootstrap start
Catalina.start: LifecycleException: null.open: java.net.BindException: Address already in use: JVM_Bind:8080
LifecycleException: null.open: java.net.BindException: Address already in use: JVM_Bind:8080
at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConnector.java:1130)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:553)
at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)
----- Root Cause -----
java.net.BindException: Address already in use: JVM_Bind:8080
at org.apache.catalina.connector.http.HttpConnector.open(HttpConnector.java:950)
at org.apache.catalina.connector.http.HttpConnector.initialize(HttpConnector.java:1128)
at org.apache.catalina.core.StandardService.initialize(StandardService.java:454)
at org.apache.catalina.core.StandardServer.initialize(StandardServer.java:553)
at org.apache.catalina.startup.Catalina.start(Catalina.java:780)
at org.apache.catalina.startup.Catalina.execute(Catalina.java:681)
at org.apache.catalina.startup.Catalina.process(Catalina.java:179)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:243)I has tested "http://localhost:8080/" in my web browser,
it is tomcat home page.
This is my context.When I run the java projest,it reports the 8080 port error,
why?Thanks a lot.
This is GetDemo.java:
import java.io.*;
import javax.servlet.*;
import javax.servlet.http.*;
public class GetDemo extends HttpServlet
public void doGet(HttpServletRequest req,
HttpServletResponse resp)
throws ServletException,IOException
resp.setContentType("text/html");
PrintWriter out=resp.getWriter();
String username=req.getParameter("uname");
String password=req.getParameter("userpw");
out.println("<HTML>");
out.println("<HEAD><TITLE>GetDemo</TITLE></HEAD>");
out.println("<BODY>");
out.println("Hello "+username+"<br>");
out.println("Your password was: "+password+"<br>");
out.println("</BODY>");
out.println("</HTML>");
out.close();
This is GetExample.html:
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"
"http://www.w3.org/TR/REC-html40/loose.dtd">
<HTML>
<HEAD>
<TITLE>Get example</TITLE>
</HEAD>
<BODY>
<font size="4">
<center>Please enter your name and passwd then press Start<br>
<FORM ACTION="http://localhost/projects/GetDemo" METHOD="GET">
Name:<INPUT TYPE="text" name="uname" value="" size="20"><BR>
Password:<INPUT TYPE="password" name="userpw" value="" type="password" size=10>
<INPUT TYPE="submit" value="Start"><BR>
</INPUT></INPUT></INPUT></FORM>
<center><HR>
</BODY>
</HTML>
This is server.xml:
<!-- Example Server Configuration File -->
<!-- Note that component elements are nested corresponding to their
parent-child relationships with each other -->
<!-- A "Server" is a singleton element that represents the entire JVM,
which may contain one or more "Service" instances. The Server
listens for a shutdown command on the indicated port.
Note: A "Server" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<Server port="8005" shutdown="SHUTDOWN" debug="0">
<!-- A "Service" is a collection of one or more "Connectors" that share
a single "Container" (and therefore the web applications visible
within that Container). Normally, that Container is an "Engine",
but this is not required.
Note: A "Service" is not itself a "Container", so you may not
define subcomponents such as "Valves" or "Loggers" at this level.
-->
<!-- Define the Tomcat Stand-Alone Service -->
<Service name="Tomcat-Standalone">
<!-- A "Connector" represents an endpoint by which requests are received
and responses are returned. Each Connector passes requests on to the
associated "Container" (normally an Engine) for processing.
By default, a non-SSL HTTP/1.1 Connector is established on port 8080.
You can also enable an SSL HTTP/1.1 Connector on port 8443 by
following the instructions below and uncommenting the second Connector
entry. SSL support requires the following steps (see the SSL Config
HOWTO in the Tomcat 4.0 documentation bundle for more detailed
instructions):
* Download and install JSSE 1.0.2 or later, and put the JAR files
into "$JAVA_HOME/jre/lib/ext".
* Execute:
%JAVA_HOME%\bin\keytool -genkey -alias tomcat -keyalg RSA (Windows)
$JAVA_HOME/bin/keytool -genkey -alias tomcat -keyalg RSA (Unix)
with a password value of "changeit" for both the certificate and
the keystore itself.
By default, DNS lookups are enabled when a web application calls
request.getRemoteHost(). This can have an adverse impact on
performance, so you can disable it by setting the
"enableLookups" attribute to "false". When DNS lookups are disabled,
request.getRemoteHost() will return the String version of the
IP address of the remote client.
-->
<!-- Define a non-SSL HTTP/1.1 Connector on port 8080 -->
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8080" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="60000"/>
<!-- Note : To disable connection timeouts, set connectionTimeout value
to -1 -->
<!-- Define a non-SSL Coyote HTTP/1.1 Connector on port 8081 -->
<!--
<Connector className="org.apache.coyote.tomcat4.CoyoteConnector"
port="8081" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0" connectionTimeout="20000"/>
-->
<!-- Define an SSL HTTP/1.1 Connector on port 8443 -->
<!--
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8443" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="10" debug="0" scheme="https" secure="true">
<Factory className="org.apache.catalina.net.SSLServerSocketFactory"
clientAuth="false" protocol="TLS"/>
</Connector>
-->
<!-- Define an AJP 1.3 Connector on port 8009 -->
<Connector className="org.apache.ajp.tomcat4.Ajp13Connector"
port="8009" minProcessors="5" maxProcessors="75"
acceptCount="10" debug="0"/>
<!-- Define a Proxied HTTP/1.1 Connector on port 8081 -->
<!-- See proxy documentation for more information about using this. -->
<!--
<Connector className="org.apache.catalina.connector.http.HttpConnector"
port="8082" minProcessors="5" maxProcessors="75"
enableLookups="true"
acceptCount="10" debug="0" connectionTimeout="60000"
proxyPort="80"/>
-->
<!-- Define a non-SSL HTTP/1.0 Test Connector on port 8082 -->
<!--
<Connector className="org.apache.catalina.connector.http10.HttpConnector"
port="8083" minProcessors="5" maxProcessors="75"
enableLookups="true" redirectPort="8443"
acceptCount="10" debug="0"/>
-->
<!-- An Engine represents the entry point (within Catalina) that processes
every request. The Engine implementation for Tomcat stand alone
analyzes the HTTP headers included with the request, and passes them
on to the appropriate Host (virtual host). -->
<!-- Define the top level container in our container hierarchy -->
<Engine name="Standalone" defaultHost="localhost" debug="0">
<!-- The request dumper valve dumps useful debugging information about
the request headers and cookies that were received, and the response
headers and cookies that were sent, for all requests received by
this instance of Tomcat. If you care only about requests to a
particular virtual host, or a particular application, nest this
element inside the corresponding <Host> or <Context> entry instead.
For a similar mechanism that is portable to all Servlet 2.3
containers, check out the "RequestDumperFilter" Filter in the
example application (the source for this filter may be found in
"$CATALINA_HOME/webapps/examples/WEB-INF/classes/filters").
Request dumping is disabled by default. Uncomment the following
element to enable it. -->
<!--
<Valve className="org.apache.catalina.valves.RequestDumperValve"/>
-->
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="catalina_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<Realm className="org.apache.catalina.realm.MemoryRealm" />
<!-- Replace the above Realm with one of the following to get a Realm
stored in a database and accessed via JDBC -->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="org.gjt.mm.mysql.Driver"
connectionURL="jdbc:mysql://localhost/authority?user=test;password=test"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="oracle.jdbc.driver.OracleDriver"
connectionURL="jdbc:oracle:thin:@ntserver:1521:ORCL?user=scott;password=tiger"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!--
<Realm className="org.apache.catalina.realm.JDBCRealm" debug="99"
driverName="sun.jdbc.odbc.JdbcOdbcDriver"
connectionURL="jdbc:odbc:CATALINA"
userTable="users" userNameCol="user_name" userCredCol="user_pass"
userRoleTable="user_roles" roleNameCol="role_name" />
-->
<!-- Define the default virtual host -->
<Host name="localhost" debug="0" appBase="webapps" unpackWARs="true">
<!-- Normally, users must authenticate themselves to each web app
individually. Uncomment the following entry if you would like
a user to be authenticated the first time they encounter a
resource protected by a security constraint, and then have that
user identity maintained across all web applications contained
in this virtual host. -->
<!--
<Valve className="org.apache.catalina.authenticator.SingleSignOn"
debug="0"/>
-->
<!-- Access log processes all requests for this virtual host. By
default, log files are created in the "logs" directory relative to
$CATALINA_HOME. If you wish, you can specify a different
directory with the "directory" attribute. Specify either a relative
(to $CATALINA_HOME) or absolute path to the desired directory.
-->
<Valve className="org.apache.catalina.valves.AccessLogValve"
directory="logs" prefix="localhost_access_log." suffix=".txt"
pattern="common"/>
<!-- Logger shared by all Contexts related to this virtual host. By
default (when using FileLogger), log files are created in the "logs"
directory relative to $CATALINA_HOME. If you wish, you can specify
a different directory with the "directory" attribute. Specify either a
relative (to $CATALINA_HOME) or absolute path to the desired
directory.-->
<Logger className="org.apache.catalina.logger.FileLogger"
directory="logs" prefix="localhost_log." suffix=".txt"
timestamp="true"/>
<!-- Define properties for each web application. This is only needed
if you want to set non-default properties, or have web application
document roots in places other than the virtual host's appBase
directory. -->
<!-- Tomcat Root Context -->
<!--
<Context path="" docBase="ROOT" debug="0"/>
-->
<!-- Tomcat Manager Context -->
<Context path="/manager" docBase="manager"
debug="0" privileged="true"/>
<Context path="/GetDemo" docBase="d:\projects\GetDemo" />
<!-- Tomcat Examples Context -->
<Context path="/examples" docBase="examples" debug="0"
reloadable="true" crossContext="true">
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="localhost_examples_log." suffix=".txt"
timestamp="true"/>
<Ejb name="ejb/EmplRecord" type="Entity"
home="com.wombat.empl.EmployeeRecordHome"
remote="com.wombat.empl.EmployeeRecord"/>
<!-- PersistentManager: Uncomment the section below to test Persistent
Sessions.
saveOnRestart: If true, all active sessions will be saved
to the Store when Catalina is shutdown, regardless of
other settings. All Sessions found in the Store will be
loaded on startup. Sessions past their expiration are
ignored in both cases.
maxActiveSessions: If 0 or greater, having too many active
sessions will result in some being swapped out. minIdleSwap
limits this. -1 means unlimited sessions are allowed.
0 means sessions will almost always be swapped out after
use - this will be noticeably slow for your users.
minIdleSwap: Sessions must be idle for at least this long
(in seconds) before they will be swapped out due to
maxActiveSessions. This avoids thrashing when the site is
highly active. -1 or 0 means there is no minimum - sessions
can be swapped out at any time.
maxIdleSwap: Sessions will be swapped out if idle for this
long (in seconds). If minIdleSwap is higher, then it will
override this. This isn't exact: it is checked periodically.
-1 means sessions won't be swapped out for this reason,
although they may be swapped out for maxActiveSessions.
If set to >= 0, guarantees that all sessions found in the
Store will be loaded on startup.
maxIdleBackup: Sessions will be backed up (saved to the Store,
but left in active memory) if idle for this long (in seconds),
and all sessions found in the Store will be loaded on startup.
If set to -1 sessions will not be backed up, 0 means they
should be backed up shortly after being used.
To clear sessions from the Store, set maxActiveSessions, maxIdleSwap,
and minIdleBackup all to -1, saveOnRestart to false, then restart
Catalina.
-->
<!--
<Manager className="org.apache.catalina.session.PersistentManager"
debug="0"
saveOnRestart="true"
maxActiveSessions="-1"
minIdleSwap="-1"
maxIdleSwap="-1"
maxIdleBackup="-1">
<Store className="org.apache.catalina.session.FileStore"/>
</Manager>
-->
<Environment name="maxExemptions" type="java.lang.Integer"
value="15"/>
<Parameter name="context.param.name" value="context.param.value"
override="false"/>
<Resource name="jdbc/EmployeeAppDb" auth="SERVLET"
type="javax.sql.DataSource"/>
<ResourceParams name="jdbc/EmployeeAppDb">
<parameter><name>user</name><value>sa</value></parameter>
<parameter><name>password</name><value></value></parameter>
<parameter><name>driverClassName</name>
<value>org.hsql.jdbcDriver</value></parameter>
<parameter><name>driverName</name>
<value>jdbc:HypersonicSQL:database</value></parameter>
</ResourceParams>
<Resource name="mail/Session" auth="Container"
type="javax.mail.Session"/>
<ResourceParams name="mail/Session">
<parameter>
<name>mail.smtp.host</name>
<value>localhost</value>
</parameter>
</ResourceParams>
</Context>
</Host>
</Engine>
</Service>
<!-- The MOD_WEBAPP connector is used to connect Apache 1.3 with Tomcat 4.0
as its servlet container. Please read the README.txt file coming with
the WebApp Module distribution on how to build it.
(Or check out the "jakarta-tomcat-connectors/webapp" CVS repository)
To configure the Apache side, you must ensure that you have the
"ServerName" and "Port" directives defined in "httpd.conf". Then,
lines like these to the bottom of your "httpd.conf" file:
LoadModule webapp_module libexec/mod_webapp.so
WebAppConnection warpConnection warp localhost:8008
WebAppDeploy examples warpConnection /examples/
The next time you restart Apache (after restarting Tomcat, if needed)
the connection will be established, and all applications you make
visible via "WebAppDeploy" directives can be accessed through Apache.
-->
<!-- Define an Apache-Connector Service -->
<Service name="Tomcat-Apache">
<Connector className="org.apache.catalina.connector.warp.WarpConnector"
port="8008" minProcessors="5" maxProcessors="75"
enableLookups="true" appBase="webapps"
acceptCount="10" debug="0"/>
<!-- Replace "localhost" with what your Apache "ServerName" is set to -->
<Engine className="org.apache.catalina.connector.warp.WarpEngine"
name="Apache" debug="0">
<!-- Global logger unless overridden at lower levels -->
<Logger className="org.apache.catalina.logger.FileLogger"
prefix="apache_log." suffix=".txt"
timestamp="true"/>
<!-- Because this Realm is here, an instance will be shared globally -->
<Realm className="org.apache.catalina.realm.MemoryRealm" />
</Engine>
</Service>
</Server> -
HT4413 Migration Assistant for a brand new mac that has been used already?
My dad bought a Mini but has been using it for a few months but didn't transfer anything from his old Mac. All his address book entries and files are still on his original Mac. Can Migration Assistant still be of help to transfer over the data without erasing what he's accumlated on his new Mac? Is it going to write over his email for instance?
Thanks!Migration Assistant is not the tool you need to use at this point. Instead you should manually copy the data you want from the old computer to the new computer. If both computers have Firewire ports then use Target Disk Mode - Transferring files between two computers using FireWire. Boot the old computer into TDM and the new computer normally. You should then find a disk icon for the old computer's drive on the Desktop of the new computer.
Before you do any of the described file copying below be sure you have quit Mail and Address Book if they are now open except where directed.
For Mail you open Mail and select Import from the File menu. Check the top option to import from Apple Mail. Navigate on the old computer to its /Users/username/Library/Mail/ folder and then locate a folder named "Mailboxes." Select the folder and click on the Open button. Select the mailboxes you want to import and click on the Import/OK button. This will import the old mail to a new set of mailboxes in Mail under a mailbox named Imported. You can then move the old mail to wherever you want in Mail.
For contacts locate the /Users/username/Library/Applications Support/AddressBook/ folder. Copy the entire folder to the new computer to the same location on the new computer.
Last, navigate to the /Users/username/Library/Preferences/ folder and copy these preference files: com.apple.mail.plist and all beginning with com.apple.AddressBook. Copy them to the same location on the new computer. -
My iPod touch wont let me buy anything, i've beem using this account for a couple of years and now it says that this is the first ime this id has been used on my device... it's not.... and to sign in and answer security questions. i cant remember the answers to the questions. How can i fix this without making a new account and losing all my stuff???
From a Kappy post
The Three Best Alternatives for Security Questions and Rescue Mail
1. Use Apple's Express Lane.
Go to https://expresslane.apple.com ; click 'See all products and services' at the
bottom of the page. In the next page click 'More Products and Services, then
'Apple ID'. In the next page select 'Other Apple ID Topics' then 'Forgotten Apple
ID security questions' and click 'Continue'. Please be patient waiting for the return
phone call. It will come in time depending on how heavily the servers are being hit.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
A substitute for using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID. -
I bought my ipad in us, and has been using a pre paid card in purchasing applications. Now i already went back to bahrain, i am trying to purchase apllication using my bahrain credit card but it cannot get through as the default country is USA.
I tried to change my country but a message says i have a store credit balance and must spend it before changing store. But how i can spend it i only have 8 cents left?
So how will i be able to purchase applications if i am in bahrain?You can try again after a few hours after waiting and you still get the same error, you'll need to contact support.
https://expresslane.apple.com/GetproductgroupList.action -
From: Apple-ID [mailto:[email protected]]
Sent: Wednesday, December 11, 2013 7:36 PM
To: Deborah McKay
Subject: Final step To verify your Apple
Dear Apple Customer,
Your Apple ID has been used to open a session iCloud from an unauthorized device..
It's easy: Click the link Your iTunes account is now locked, please enter your account to verify your information. .
Update Now >
After you finished your account is confirmed, let us know immediately. Report, it is important because it helps us prevent fraudsters from stealing your information. Sincerely, apple.
copyright 2013 Apple Inc. Please do not reply to this email because we are not monitoring this inbox. To get in touch with us, log in to your account and click "Contact Us" at the bottom of any page. Copyright © 2013 apple. All rights reserved. apple (Europe) S.à r.l. et Cie, S.C.A. Société en Commandite par Actions Registered office: 22-24 Boulev ard Royal, L-2449 Luxemburg RCS Luxemburg B 118 349 apple Email ID PP315.
I just got this message and sent it to [email protected] per instructions on another post. the link leads to a page asking for Apple id and credit card information.I got a similar email. It's obviously Spam. The double period afetr the first sentence and the otherwise poor grammar are dead giveaways even before I checked out the link embedded. -- I didn't click on it, just hovered over it to get the url. And the return address was [email protected] Very bogus.
-
Someone I entrusted my computer to for repairs decided to keep it. all my personal information was on the computer. the peron has been using my credit card information o make ourchases from the apple store. If I do not have a credit card on the account on my iphone, I am unable to updatw it or my ipad. After persuading the apple store people to delete the last credit card info, I had to put aother credit card on the iphone to be able to update the software and thevapps. now that card is being used by the person o download war games on the new card. I cannot find any of his downloaded games on any of my devices. I am close to giving up my iphone and ipad. the last time i called the apple store, theynwould not give me the IP address of the omputer the games were downloaded to. they only gave me the name of my ipad. anyone could name thir ipad according to the name on mynipad. I have found the Apple store less than friendly about security matters like this. What can I do to maintain my acount and not continue to be ripped off by the thieving interloper? if i change my user name nd password, i will forever lose legitimate purchases. Please advise me.
KillerappleuserWe are fellow users here on these user-to-user forums, you're not talking to iTunes Support nor Apple.
Is the credit card registered to exactly the same name and address (including format and spacing etc) that you have on your iTunes account, it was issued by a bank in your country and you are currently in that country ? If it is then you could check with the card issuer to see if it's them that are declining it, and if not then try contacting iTunes support and see if they know why it's being declined : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management
Each time that you add or change your card details then a temporary store holding charge may be applied to check that the card details are correct and valid (though that is usually $1 or the approximate local equivalent) : http://support.apple.com/kb/HT3702
Did your daughter owe any amounts to iTunes ? Does anything show on your purchase history : http://support.apple.com/kb/HT2727 ? If they are proper charges which you don't think that you should have then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
My daughter has been using my iTunes account to buy music and apps. I now want to set up a separate iTunes account for her, with a different login. How can we transfer the music and apps she has already bought to her new iTunes account?
Hello, thank you for your prompt answer. I did have an idea that Home sharing might be the answer but could not quite figure out how to do it. I have enabled home sharing in my iTunes account, put in username and password, clicked on creat etc. But the homs sharing icon doew not appear in the left side of iTunes. So I got stuck. Any further ideas?
-
My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.
Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email. -
I just got a new MacBook Pro, and I tried to bring across my files from my last mac using time machine. After it was done copying I can't find my files anywhere but the space (about 130gb) has been used on my hard drive. Does anyone know how I can get to them? I did change my user name from 'user' while it was copying, could this have something to do with it?
You don't want to do that by copying.
Your best bet, by far, is to use Setup Assistant. If your Mac is running Snow Leopard, see Using Setup Assistant on Snow Leopard or Leopard.
If it came with Lion, it's a bit different: Using Setup Assistant on Lion -
How to find out what text encoding has been used in mp3 tag
Hello
I have some foreign songs that I am importing into itunes. When a song called "04.公路 塵埃 北合起." gets imported, it comes up in itunes as "04.§Ω∏Ù π–ÆJ •¶X∞"
Now I don't know a lot about different text encodings, but from what I've read on the forums is that the problem is that the tags that are encoded on the srcfiles are not unicode. I have tried the java application "UnicodeRewriter" recommended elsewhere in the forums, but both the commone Chinese ecodings, viz Big5 GBK etc.
Is there a way to cut a world from (eg a chinese glyph) and somehow find out what text encouding has been used?Sorry, that question wasn't very well phrased. I'll try it again.
I have some foreign songs that I am importing into itunes. When a song called "公路 塵埃 北合起" gets imported, it comes up in itunes as "§Ω∏Ù π–ÆJ •¶X∞"
Now I don't know a lot about different text encodings, but from what I've read on the forums is that the problem is that the tags on the srcfiles are not unicode. I have tried the java application "UnicodeRewriter" recommended elsewhere in the forums, but whatever I sent the source encoding to, eg Big5, GBK, or one of about 9 others, I just get different types of garbage coming through.
Is there a way I could take the original glyph in the file name (which shows up correctly on my desktop) and paste it into some sort of table. That table will then show me how that glyph will look in all different encodings without the correct conversion. So if I can match my "公" to my "§" I'll be able to see what the src encoding is.
I know this is a longshot, but any help appreciated.
Sorry for the rather rubbish explanation earlier. -
I have created a farm solution and then i deploy it to SharePoint server, the code looks as follow, and i use it to update a page info values (as the current page values represents old info):-
[ToolboxItemAttribute(false)]
public partial class VisualWebPart1 : WebPart
// Uncomment the following SecurityPermission attribute only when doing Performance Profiling using
// the Instrumentation method, and then remove the SecurityPermission attribute when the code is ready
// for production. Because the SecurityPermission attribute bypasses the security check for callers of
// your constructor, it's not recommended for production purposes.
// [System.Security.Permissions.SecurityPermission(System.Security.Permissions.SecurityAction.Assert, UnmanagedCode = true)]
public VisualWebPart1()
protected override void OnInit(EventArgs e)
base.OnInit(e);
InitializeControl();
using (SPSite site = new SPSite(SPContext.Current.Site.Url))
using (SPWeb web = site.OpenWeb())
SPList list = web.Lists["Pages"];
web.AllowUnsafeUpdates = true;
foreach (SPListItem items in list.Items)
items["Author"] = "SharePoint";
items["Created"] = "01/08/2014 01:44 PM";
items.Update();
list.Update();
web.AllowUnsafeUpdates = false;
protected void Page_Load(object sender, EventArgs e)
but when i try adding this web part to a page i got the following error:-
Invalid data has been used to update the list item.The field you are trying to update may be read only
so can anyone advice?i only changed lines bitween
web.AllowUnsafeUpdates = true;
and
web.AllowUnsafeUpdates = false;
and other parts of code remains without change
so it will updates all pages in current web
yaşamak bir eylemdir -
Trying to follow Serge Luca's Step by Step Tutorial. Creating Workflows for Windows Sharepoint Services and MOSS2007. http://sergeluca.spaces.live.com/blog/cns!E8A06D5F2F585013!859.entry
I have an onWorkflowActivated, followed by an ifElse condition and a log to history.
In the IfElse, each branch has a code segment, that trys to update the status column in the list that the workflow is attached to.
private void Authorize_ExecuteCode(object sender, EventArgs e)
// tried serveral methods
WorkflowProperties.Item["Status"] = "Automatically Approved";
// tried all of the following (one at a time)
item.update();
WorkflowProperties.Item.Update();
WorkflowProperties.Item.SystemUpdate();
//tried this as well.
Microsoft.SharePoint.SPListItem item = WorkflowProperties.Item;
item["Status"] = "Automatically Approved";
item.Update() ;
On the update call I keep getting "Invalid data has been used to update the list item. The field you are trying to update may be read only."
Could someone explain how to update "Status" column of the list item that the workflow is working on?
Thank you very much.
Bill
Hi:
you can do the following:
add the following code to the workflow.xml file (under the MetaData section)
Code Snippet
<ExtendedStatusColumnValues>
<StatusColumnValue>Branch1</StatusColumnValue>
<StatusColumnValue>Branch2</StatusColumnValue>
</ExtendedStatusColumnValues>
then add 2 SetState activities one in each branch of the IfElse.
for the code behind of setState1 (branch1) write the following code:
Code Snippet
state = Convert.ToInt32(SPWorkflowStatus.Max);
for setState2 (branch2) write the following:
Code Snippet
state = Convert.ToInt32(SPWorkflowStatus.Max) + 1;
where state is the variable assigned to the field State in the properties of the SetState(design lever), or instead of state u can use the following code:
Code Snippet
((SetState)sender).State
where sender is the object sent through the function parameter.
hope this answered your question
Best Regards -
Hi.
I am getting below error while adding value to look-up field.
Invalid data has been used to update the list item. The field you are trying to update may be read only.
I have tried many forums ans post but didn't come to know what's the root cause of issue. I am also posting Code for creating and adding lookup field.
CAML to create lookup field (It works Fine)
string lkproductNumber = "<Field Type='Lookup' DisplayName='Product Number' StaticName='ProductNumber' ReadOnly='FALSE' List='" + pNewMaster.Id + "' ShowField='Product_x0020_Number' />";
Code to insert value to lookup field
ClientContext client = new ClientContext(SiteUrl);
client.Load(client.Web);
client.Credentials = new NetworkCredential(this.UserName, this.Password, this.Domain);
// Lookup Lists
List pmList = client.Web.Lists.GetByTitle("Product_Master");
//List Conatining Lookup Columns
List piList = client.Web.Lists.GetByTitle("Product_Inventory");
client.Load(piList);
query.ViewXml = "<View/>";
ListItemCollection collection = pmList.GetItems(query);
client.Load(collection);
client.ExecuteQuery();
int prodid=0;
foreach (ListItem item in collection)
if (Convert.ToString(item["Product_x0020_Number"]) == ProductNumber)
{ prodid = Convert.ToInt32(item["ID"]); }
ListItem piItem = piList.AddItem(new ListItemCreationInformation());
piItem["Product_x0020_Number"] = new FieldLookupValue() { LookupId = prodid };
piItem.Update();
client.ExecuteQuery();
Exception Detail
Microsoft.SharePoint.Client.ServerException was caught
Message=Invalid data has been used to update the list item. The field you are trying to update may be read only.
Source=Microsoft.SharePoint.Client.Runtime
ServerErrorCode=-2147352571
ServerErrorTypeName=Microsoft.SharePoint.SPException
ServerStackTrace=""
StackTrace:
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponseStream(Stream responseStream)
at Microsoft.SharePoint.Client.ClientRequest.ProcessResponse()
at WebServiceProviders.ClientServices.NewProductInventory() in Z:\.............ClientServices.cs:line 889
InnerException:
Quick response is highly appreciated.
Thanks
MeharTry some thing like below,
your data value that needs to be update should be in this format "ID of the lookup";#"Title of the Lookup"
For example,
listItem["Product_x0020_Number"]
= "1;#iPhone";
listItem["Product_x0020_Number"]
= "2;#Mobile";
Hope this helped you....
Maybe you are looking for
-
How to insert multiple rows in a single shot using insert command?
Hi, If we insert one row, we can use "insert into" command. I want to insert multiple rows into the table in a single shot. Is there any SQL command for insert multiple rows into the table? Plese give the solution. Thanks, chelladurai
-
Photoshop elements 8 - audio with slideshow
I've added mp3 tracks to my slideshow, but they won't play. Elements seems to accept this format, but won't play these tracks. It'll play tracks I have i wma though... I converted from tracks in iTunes (to mp3) is this why they won't play? There'
-
Hi. I can't start my local J2EE Engine after a workplace SP11 installation. OS: Windows 2000 Pro. JRE: 1.4.2_07 Below you see the developer trace that is displayed when I try to start the J2EE Engine. // -Fredrik trc file: "C:\usr\sap\J2E\JC00\work\d
-
Has anyone found a way to keep Verizon Email with old dial-up service
When I moved a few years ago I cancelled my version DSL and went to a low cost monthly dial up service, so I could keep my email. The monthly fee has now gone up a whopping $10.00 extra per month. I was told to get a Verizon domain service, but found
-
How do I return my mail going from the MAC mail back to my AOL
How can I return my mail from the MAC mail to my AOL