Port 8080 block what can i do???
Hi !!
Im using a site online to upload and donwload some files (www.uptobox.com), since they made maintennance on it i cannot do anything, i contact them and thy told me that i must have a firewall wich block my 8080 port, i try to find a way to unlock it but i really dont know how to do... Can somebody help me for this??? Please!!!
good day to all!!! and thanks in advance!!!
It is a setting on your router, Not on your computer, that May Be blocking port 8080. Or it could be your ISP that is blocking it.
Try Rebooting all your equipment, Modem, Router and computer.
Similar Messages
-
hi, my daughter wrote wrong paswords in my ipod touch and it is blocked. It says it needs to be connected to itunes, but once its there it says the ipod is blocked with a passcode..the ipod is just blocked. what can I do?
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
i need to reset security question but the email that was saved for changing the password and security question is blocked , what can i do?
i purchased my account but i cant use that because apple ask me about security question and i forgot the correct answerAlternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions. -
HT4623 my ipad is blocked what can i do
my ipad is blocked with passcode
what can i do
i wait u for rply
ver ios 7Force iPad into Recovery Mode (Step by Step)
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"... -
My phone was being updated from my computer and now it is blocked what can I do. No turning on or off. Help please
http://support.apple.com/kb/HT1808
-
Oracle 9i grabs port 8080. Where can I configure that to something else?
thanks
Mike
[email protected]Hi Mike,
Please Refer to the section Configuring Oracle XML DB with Enterprise Manager: Chapter 21 from the book
XML Database Developers Guide - Oracle XML DB
Thanks,
Chinta
Oracle 9i grabs port 8080. Where can I configure that to something else?
thanks
Mike
[email protected] -
Port 8080: I know this is simple, I just can't get it to work.
I'm trying something that I'm sure is relatively simple. But I just can't get it to work. I have OSX Server 10.4.10. I currently have my company site (www.example.com) hosted on it. But I'm trying to get another site hosted on it at port 8080. When I enter my company domain, www.example.com:8080, the page can't be displayed. But when I enter the IP address, such as 192.168.xxx.xxx:8080 from within my network, the correct site shows up. How can I get a website displayed at port 8080 from outside my network? I'm running DD-WRT on my router and have ports 80 and 8080 directed to the IP address of my server.
Thanks in advance for any help.Hi WiFiNetGuy-
I am a tad confused, which isn't new, but I need to get a grasp on exactly what it is that you are trying to do.
Do you have both websites (i.e. www.example1.com and www.example2.com) both pointed at the same ip address? How many unique domain names and ip addresses are we talking about?
From what you describe it sounds like a routing issue but I need more info (:>)
Luck-
-DaddyPaycheck -
How to detect what's using port 8080
I'm getting this error when runing my ANT script:
[java] LifecycleException: service.getName(): "Catalina"; Protocol handler start failed: java.net.BindException: Address already in use: JVM_Bind:8080
wonder how can I tell what's using port 8080.
thankswindows:
c:\netstat -an | find "8080"
*nix:
netstat -an | grep "8080" -
i made the update for IOS 6 with the latest version of iTunes and it downloaded the latest version of IOs 6 after that, when it was trying to intall the update it gave me an error ( error (6) ) , now my iPhone is in the stage where it shows me a cable and the itunes logo. what can i do to fix it ?
Error 2, 4 (or -4), 6, 40, 1000, 9006
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
Verify that access to ports 80 and 443 are allowed on your network.
Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
Restore your device while connected to a different network.
Restore using a different computer. -
What incoming public TCP ports are blocked?
I just setup my 890L to forward incoming public TCP ports to to a couple of my LAN devices. Unfortunately, it looks like VZB is purposefully blocking common incoming TCP ports.
I tried searching on google.com for what ports are blocked; but, just found a bunch of posts like this one. Some people actually tried contacting 1st and 2nd tied VZB tech support about this; but, it's clear they don't have this information available to them.
Has anyone verified what incoming public TCP ports are not blocked? There's no easy way for me to test this using my 890L.You can find out for yourself which ports are being blocked by using a Port Query utility. Depending on the OS of your computer there should be multiple utilties available for free floating around.
As we have seen numerous times before, devices on VZW's new SIM card/4G LTE network are blocked from many of the public facing services and features we have previously been dependant on. Public IP Addresses, Public Ports, Webcams, VOIP phones, etc. all suffer under the same umbrella of limitations on the new network. The list is too long to publish everything that is blocked or not working as it previously did. Much easier for you to post the requirements of your application and have us confirm if its working or not.
If you have not already experimented with VPN's I'd suggest checking them out. VPN's are one of the easiest ways around these new limitations. With a VPN enabled your device will tunnel all of its communications out an allowed port to a VPN server where your traffic is free to act normally before returning to you. -
Port 25 blocked; can't send mail
I didn't keep track when the problem started a couple of weeks ago, as I thought it was with my ISP: about mid-afternoon I would stop being able to send outgoing mail, although incoming mail would still get through and I had no trouble browsing the web. In the early evening I would finally be able to get through again. This didn't happen every day, but it always took the same pattern when it did. Then yesterday the problem began about 11:30 am, and it was 10:30 pm before I could send mail again; and this morning I lost the ability to send mail out about 9:15.
So I phoned my ISP, and found the problem did not lie in their server as I had expected (Entourage was giving me the standard message "An operation on the server timed out. The server may be down, overloaded, or there may be too much net traffic.//Mail could not be sent.//Error: -3259"). The fault is not in Entourage itself, either; Mail is blocked the same way, and the timeout also occurs when I telnet to the SMTP server in Terminal (I can telnet to the POP server just fine). The problem remains when I disable Norton Personal Firewall, NAV, and Snort.
The trouble seems to be confined to my machine. I am cabled to an AirPort Extreme base station; our network includes another two eMacs and a PC, all connected wirelessly. I tried to telnet from one of the other Macs and had no trouble.
So what can I do to discover what's blocking port 25, and how to unblock it? What haven't I thought of? (Probably something obvious...)
TIA, JeffThat's good advice, but I'm stymied: whenever I try to run Norton Uninstaller, it gives me a nasty message "UNKNWON_ERROR" [sic] many times repeated, and nothing has been removed. I'm hesitant to remove files manually without knowing what support files to get rid of besides the application(s).
But having tried again before replying, I can now add to the characterization of the problem. When Norton Uninstaller asked me to restart, I booted in Single User mode and ran fsck. A sh*tload of orphaned temp files showed up and had to be cleared. When I got back into normal mode, the fault had cleared (no surprise, really).
So the question becomes this: What process running on my machine is breaking down so as to block me from sending SMTP?
A further symptom turns out to be that, although my machine was properly connected to the internet through the AirPort Extreme base station, and was getting a good DHCP lease, the base station itself was inaccessible from AirPort Admin Utility. (I looked because I wanted to see whether there could be anything blocking my machine alone from that end.) That too now works.
Anyway, I now know how to recover when the SMTP problem arises. But that's only half the issue -- I really want to know what's going wrong in the first place, so I can prevent it happening in the future. -
iTunes crashes when I click the iTunes Store block. What can I do to get the iTunes Store to open on my computer running Window 7 (all updates installed)? It used to work last fall but some update must have reset something or the newer version of iTunes omitted something that would allow access to the Store from a PC.
Look here.
http://support.apple.com/kb/index?page=answerlink&url=http%3A%2F%2Fsupport.apple .com%2Fkb%2FHT1495&answerid=16777216&src=support_site.home.search -
I connected the rocketfish mini display port but am only able to have audio through my computer. I was able to successfully drag the video to the tv. What can I do to hear through the tv?
I HAVE T.V VOLUME!!! Thank you sooooo much eww. I was on my way thinking I would have to buy yet another type of cable. : ) Again thanks!!!
-
Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me
Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me
-
What can I do aout Adobe Flash Player blocking view of internet sites?
1. System Preferences > Other/ Flash Player > Advanced > Delete All
Press the "Delete All" button
Install Adobe Flash Player.
http://get.adobe.com/flashplayer/
Follow the prompts.
Quit Safari.
Restart computer. Relaunch Safari.
2. Allow Plug-ins
Safari > Preferences > Security
Internet Plug-ins > "Allow plug-ins"
Enable it.
Press " Manage Website Settings" button for more options.
Maybe you are looking for
-
Bose DockStation Incompatibility since Nano Op Sys Upgrade to 1.3
Hi, has anybody else suffered a 'mute' Bose DockStation since upgrading to 1.3 of the iPod Nano operating system? I've tried all other suggestions of plugging/unplugging headphone jacks and adapter cables, as well as resetting the Nano, and still sil
-
i have a slow macbook, i ran live disk utilities (from hard drive), turned out I needed to repair disk from a installation disk. Did that, I got the volume (Hard drive) repaired from the installation disk disk. To this point, great! When I reboot fro
-
With 'Mail v8' and 'Yosemite' 'mail' "account settings" are not saved and I keep having to check the "SSL" box. This has only occurred since upgrade to Yosemite? Any help would be appreciated as this is so frustrating!!
-
Unable to use ora:countNodes in OBPM 11g
Hi, I have a BPM Data Object 'solutionProposal' which has the following value after picking up the response from a service call. <?xml version="1.0" encoding="UTF-8" ?> <solutionProposal xmlns="http://agreement.pdom.nordea.com/solutionproposal/object
-
Can anyone explain why the following tween in Frame2 of the main timeline doesn't work? The 1st works fine. Frame1 var twMoveClip:Object = new Tween(this.mcMenu.mcB, "_y", Strong.easeInOut, 196, 0, 20, false); twMoveClip.onMotionFinished = function()