Port 9iAS from NT to Solaris

What are the issues that you may face while porting 9iAS from NT to UNIX with Oracle Developer 6 applications deployed on 9iAS

Hm, I don't see any problems unless you're using native libraries. Just
          try it...
          Nils
          William Ruegg wrote:
          >
          > I have a servlet in WLS on NT that I want to port to the same version (6.1) for Solaris. The servlet captures web clicks, logs name/value pairs via JDBC to a database and redirects to another address. What issues if any am I likely to run into?
          ============================
          [email protected]

Similar Messages

Conversion to 9ias from OAS

We are putting together a migration/conversion strategy for
moving to 9ias from OAS and need to know if we can install 9ias
on the same server as OAS without any issues, then once we have
moved users to this, remove the OAS from the App Server?

I also posted this on the Metalink forum and did get a response
back:
You can certainly install 9ias and OAS on the same box. You need
to be aware that the www listener of OAS uses Port 80 which is
the same port that 9ias tries to use for Apache. You will want
to change the www listener to something else. In addition, it is
not recommended that you use the same database for OAS and 9ias
because they use different pl/sql toolkit. You should use a
different database for 9ias.

Ping return a lot of "ICMP Port Unreachable from gateway"

hi all,
continues getting many "ICMP Port unreachable" messages while i ping a host that is within same subnet. both servers are running solaris 10 U6. is there any wrong configuration of IPMP ?
PING rac-dbs-a2: 1024 data bytes
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=0. time=0.830 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=1. time=0.608 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=2. time=0.547 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=3. time=0.611 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=4. time=0.543 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=5. time=0.616 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=6. time=0.663 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=7. time=0.596 ms
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=8. time=0.672 ms ICMP Port Unreachable from gateway rac-dbs-a2 (10.1.3.27) for udp from rac-dbs-c2 (10.1.3.36) to rac-dbs-a2 (10.1.3.27) port
37833
1032 bytes from rac-dbs-a2 (10.1.3.27): icmp_seq=9. time=0.582 ms
----rac-dbs-a2 PING Statistics----
10 packets transmitted, 10 packets received, 0% packet loss round-trip (ms) min/avg/max/stddev = 0.543/0.6268/0.830/0.0828
ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.27 netmask ffffff00 broadcast 192.168.1.255
groupname internal-multipath
bge0:1:
flags=201040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,CoS> mtu 1500 index 2
inet 192.168.1.37 netmask ffffff00 broadcast 192.168.1.255
bge1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3
inet 172.22.100.27 netmask ffffff00 broadcast 172.22.100.255
groupname smtm-multipath
bge2: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 10.1.4.27 netmask ffffff00 broadcast 10.1.4.255
groupname crf-multipath
bge2:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 4
inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
bge3: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
inet 10.1.3.27 netmask ffffff00 broadcast 10.1.3.255
groupname rac-multipath
bge3:1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 5
inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
ce0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 6
inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
groupname internal-multipath
ce1: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 7
inet 0.0.0.0 netmask ff000000 broadcast 0.255.255.255
groupname smtm-multipath
ce2:
flags=249000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,INACTIVE,CoS
mtu 0 index 8inet 0.0.0.0 netmask 0
groupname crf-multipath
ce3:
flags=249000842<BROADCAST,RUNNING,MULTICAST,IPv4,NOFAILOVER,INACTIVE,CoS
mtu 0 index 9inet 0.0.0.0 netmask 0
groupname rac-multipath
Edited by: hello78 on May 11, 2009 9:02 PM

This isn't a Java question. Try the Solaris forum.

How to hide the PORT NUMBER from the URL

Hi,
We have Application on Node 1 and Database on Node 2
Apps Version: 11.5.10.2
DB: 9.2.0.6
We recently added a new node to act as web server for iSupport.
Now we are able to access the url using public Ip-address which looks like
http://<Internet Ip-Address>:<PORT NUMBER>
Eg: http://******.com:8000
But we dont want the *'PORT NUMBER(8000)'* to be displayed.
How to hide the port number ?..
Thanks in Advance,
Mahesh

Hi Hsawwan,
Can you plz explain me the steps how to hide the port number from the url as our network administrator is not aware of this.
Regards,
Mahesh

Port number from 7777 to 8080 - URGENT please

dear all,
i'm using Apex 2.2,
i wanted to change port number from 7777 to 8080,
due to Security Reasons, i have to change the port from 7777 to 8080
in which File i need to do the Changes & what are the Steps to be Followes,
http://10.33.20.6:7777/pls/apex1/apex
i wanted to change the same to
http://10.33.20.6:8080/pls/apex1/apex
please Help me out in this,
its is Very URGENT PLEASE
Many thanks

This is unlikely to be any help becaue your URL specified 'pls' in the path indicating that you are using mod_plsql, but but you might like to check that you are not inadvertently servicing your Apex instance with the embedded PL/SQL gateway.
Check to see if you are using EPG with the simple sql :
SELECT DBMS_XDB.GETHTTPPORT FROM DUAL;
If value returned is 7777 then you appear to be using EPG.
Change the port using EXEC DBMS_XDB.SETHTTPPORT(8080);
And then navigate your http://10.33.20.6:8080/pls/apex
As I said it's unlikely to be any help but wort checking all the same.

NAM 5.1 How to create Application with port range from cli?

Hello,
I can create new Applicaion with port range from GUI, but I can not do it from CLI
If I do it by CLI as a:
nam# application
nam# name mkst-cur-A
nam# match udp 16001-16009
nam# exit
then
nam# show application app-tag 268435576
custom:120 (268435576) mkst-cur-A
udp 16001
nam#
But if I do it by GUI and than
nam# show application app-tag 268435576
custom:120 (268435576) mkst-cur-A
udp 16001 - 16009
nam#
How to do it by CLI?

Hi Alexey,
Sure, the function you're looking for is in the ANALYSIS panel under the "CUrve Fitting" palette-- it's called "Linear Mapping". You will need to create the desired X channel prior to calling this function, though, so you will probably need to use the ANALYIS function "Generate Numeric Channel" in the "Channel Functions" palette.
Brad Turpin
DIAdem Product Support Engineer
National Instruments

OC4J_BPEL no port available from the port range

To All,
We could not start our BPEL Process Manager and OC4J_BPEL. We have shut down and restarted the Linux server repeatedly and re-running the IRCA. All stacks are running except the OC4J_BPEL and BPM.
We keep receiving the following message when we start the BPM:
BPEL Process Manager
OraBPEL : OC4J_BPEL no port available from the port range
OraBPEL : OC4J_BPEL - failed to start a managed process after the maximum retry limit
OC4J_BPEL
OraBPEL : OC4J_BPEL no port available from the port range
OraBPEL : OC4J_BPEL - failed to start a managed process after the maximum retry limit
Our OraBPEL is on a single HP NetServer LH6000 with Red Head AS 3.0, Oracle 10g DB and AS middle tier all in the same machine. The server was running a batch BPEL process. After running 2 hrs and process 12,000 records it was brought down by a single runtime exception. We were able to bring back the Oracle 10g AS middle tier but not the OC4J_BPEL instance. Any help would be appreciated.

I changed the OC4J_BPEL port from 3201 to 3211 fix the problem. It was conflicted with the home instance that is using port 3201. However that still can not get rid of the OC4J-BPEL failed to start a managed process after the maximum retry limit.

Porting data from Oracle8i to XML and from XML to Oracle 10g

Hai
I have a client database (using oracle 8i) and a server database (oracle 10g).
Due to lack of leased line connectivity i want to port these offline data from 8i to 10g
using a modem(dial up connection).Is there is any way to port data from 8i to XML
and from XML to 10g.
thanks in advance
dejies

Thanks Nicolas,
As per documentation, it seems to be difficult for export/import from Oracle8i to 10g. Is that any way to achieve this? I have to append the newly imported data with old or exisiting data into Oracle10g.
Regards
Nikhil

W701 esata port suffering from poor design/quality from manufacture?

After having my W701 for 5 weeks, with 2 replacment of MB due to different problems, last time bios and port problems, I got i back from Lenovo today. I had reported it with a no functional/very poor functional esata port.
What happens is that:
With my lacire drive;
When I write to internaldrive everything is ok - when I write from my internal drive to the external it stops and says that the disc is no longer attached.
With my chieftech cabinet with esata port:
Writing from works fine - writing to starts good, then hangs for a minute or so - then drop from 50 MBps til 18 MBps, then continous, and does it again.
When I use them against my HP Homeserver EX495 it works like a charm, so non of the disk is the problem, unless the have some love for my HP, and hate Lenovo - but that would seem rather absurd to me.
The last MB didn't work better, and the new one dosn't either. Anyone who has an idea? I can't belive that 2 MB has the same problem, or? Allthough the IBM technician admitted when asked that he had not tested the esata port, he figured that since it was on MB, and that was changed it would work fine - but obviously that wasn't right.
edit:
I did another test now after packing a .rar file. The transfer to the lacie failed, but to chieftech it went fine. But - sending huge .tiff files was the reason of buying esata disk, so that dosn't really help me, other than telling that sending 100 files will crash, and 1 file is less probable to fail, but has currently a 50/50 chance of doing so.
I tried with the chieftech later - and it repeated the problem - it started with 6 MBps - den stopped - worked again - and so it kept on working.
How I tested this time:
1 file was zipped on my server - 2,5 GB (1)
1 file was zipped on the internal drive - 5,5 GB (2)
Transfer of file 1 from server to drive went fine to Chieftech , but failed on Lacie.
Transfer of file 2 from internal to both Cheiftech and Lacie failed big time. Chieftech froze explorer, and until I plugged the disk out by napping the cable out it wasn't possible to use the computer. Lacie failed after 5 seconds.
The first times I tried to transfer 129 files - and that didn't work any better.

Sorry, but I have no suggestions for solutions to your first post.
But, the W700 can run without RAID; you just need to turn it off. Backup all files before proceeding, during the boot process you can press CTRL + I to enter the RAID BIOS. Simply remove the drives from the RAID and install the OS to HDD 0 or 1. The other HDD will then be an "extra". After doing this you may also be able to hide RAID in BIOS, can't remember 100%, but should be do-able.
Hope this helps
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Airport extreme blocking port 25 from my macbook pro

My airport extreme is not supporting port 25 from my macbook pro, only product in my residence that port 25 is not supported. (iPads, iPods, macbook air)

I believe I understand this better now. When I unplug my MacBook Pro from the network including disabling Wi-Fi, then when I open AirPort Utility it of course shows and I am no longer connected to my home network on the MBP. All the other hardwired or Wi-Fi connected computers, printers, hard drives and iPads are still connected.
Steve
6 Jan 2013

How to do port forwarding from wla2-g54l Buffalo bridge to mac mini

Hi,
I am trying to get Azurus to remove the "firewall block" message and I think I have narrowed it down to port forwarding.
I have set up port forwarding from my X modem to the Airport Xpress base station. I have then set up the port forwarding from the base station to the buffalo.
The problem I have had is setting up the wla2-g54l to forward the same port to the mac mini....
any Ideas? Not much luck on the Buffalo website.. and I have RTFM. Many times!
Cheers
Mac Mini G4 1.2Gz Mac OS X (10.4.8)

It sounds like your set-up is in a horrible mess with 3 levels of NAT going on.
What you should really have is the X-Modem configured in it's default mode "Modem Mode" where there will be no need to do any port forwarding as the modem is acting as a pure modem without having any influence over ports.
Then the Airport express should be configured to "Distribute IP addresses" so that the Airport is acting as a router. I presume that you use the Buffalo unit as a repeater for the AIrport so you should set-up WDS so that both are on the same network. Then your computers will all be using IP addresses in the 10.0.1.x range as issued by the Airport. You can then configure the Airport to directly forward ports to the IP address of your computer. Therefore only one instance of NAT and only one set of port forwarding rules.

Upgrade 9iAS from 1.0.2 to 1.0.2.1

I want to upgrade portal from 3.0.6.6.5 to 3.0.8. I'm working on HP-UX 11.0.
I've read on otn, that I need to upgrade also 9iAS from 1.0.2 to 1.0.2.1.
Where can i find this upgrade script and some documentation about it.
Thanks for your answers.
Alain.

Hi!!
I have migrating from ias 1.0.2 to 1.0.2.1 and i want to migrate also Portal from 3.0.7 to 3.0.8 and i don4t know what are the correct steps. I read the migration document and i have minimal installatio tipe (http sever and Portal) and if don4t read bad i only have to backup the panama directory install 9ias in the same oracle home that the previous release and make changes in jserv.properties but and then i don4t know if i have to upgrade portal with the installation gives me configuration assistant or launch the pupgrade.cmd, i launch this and don4t works, i do it in a second machine but i need to do thus in our server.
Could anyone say me what are the good steps to migrate this??
Thanks in advance.

Migrating production oracle 9.2.0.6 datawarehouse from HP to Solaris

Hi,
I am planning to move my production data warehouse(oracle 9.2.0.6) with size 600GB from Hp to Solaris.Could you please help me figure out the steps.

Check my note in this Doc on Migration of Oracle 9i database from HP Unix to RedHat Linux

Retain SAMBA permissions while migrating from linux to solaris 10 x86

Hello,
We are migrating a system from Redhat to Solaris 10 x86 and this has brought up a question on how we can restore our SAMBA files and retain our permissions that are associated by the users name rather then their numeric ID(UID/GID). So far my research hasnt produced anything that gives a solid answer to how we do this and is it even possible.
The problem is that Windows user and group accounts are mapped locally per host by default. That mapping is defined as the accounts are referenced, so unless there is a way to guarantee the order of accounts being referenced, the mappings from Windows SIDs to Unix UIDs will be different between old and new.
If the data restoration option we choose for the new server is naive and restores only by UID and GID, the permissions in the ACLs will not map to the correct Windows accounts. We either must find a restoration option which restores permissions by name rather than ID or we must create a script which can automate pushing the ACLs into the restored filesystem correctly by name.
Initially I thought ufsdump could handle this but we are on ext3 filesystem going to vxfs. I have read a little on star but havent heard about it before. Has anyone used star for backup/restore for the purpose of retaining ACL ownership/permissions? It seems like its an old utility, maybe not used much anymore. Does anyone have a utility they have used for this purpose?
Your help is much appreciated!!
LR

The problem is that Windows user and group accounts are mapped locally per host by default. That mapping is defined as the accounts are referenced, so unless there is a way to guarantee the order of accounts being referenced, the mappings from Windows SIDs to Unix UIDs will be different between old and new.Is there anyway that you can sanitize and post a small snippet of what's going on with the mapping files? I think I can follow this but I'm a bit confused by the username/UID thing since usually if a username is defined in /etc/passwd than the files will display the username. If a username is not defined in /etc/passwd then the ls command will revert to just showing the numbers which I take it is what you don't want to happen.
If you could also sanitize and post even one of the acl's that might help clear up that portion of the problem as well.
alan

No Port Available from the port range

Hi, Im getting "no port available from the port range" for the default_group/home/default_group process when I attempt to start opmn. I changed the port no through the application server control panel, and now I cant start opmn to change it back again! Could anyone tell me how to go about changing it back please?
The error report looks like this:
There are some errors while stopping the following components. Refer to the generated error report for more details.
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:no port available from the port range
==================================================
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:failed to start a managed process after the maximum retry limit
==================================================
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:no port available from the port range
==================================================
==================================================
ias-component: default_group
process-type: home
process-set: default_group
Error Message:no port available from the port range
==================================================
Can anyone help?

See the Oracle Application Server Administrator's Guide. Here's a link for the 10.1.2.0.2 version of the book:
http://download-west.oracle.com/docs/cd/B14099_19/core.1012/b13995/ports.htm#i1038905
Helen

Port 9iAS from NT to Solaris

Similar Messages

Maybe you are looking for