Port addressing and restricted MACs to a port Cisco Catalyst 1900
Hi, to everyone I want to ask if there is a method or documentation to guide me throught to give restricted mac or macs to a port via snmp. What are the OIDs and method? Any information would be helpful. Thanks in advance.
Thank you for your reply. So, you mean that I can do this via SNMP? What are the OIDs or the MIB? Is there any available documentation on how to do that?
Similar Messages
-
Multiple IP Address And Same MAC
We have a netapp storage device and we are having intermittent problems with it.
When I look at the ARP cache on our core switch I noticed that the storage guys have created mulitple shares with the different IP address but they all point to the same MAC address
Internet 172.16.14.23 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.16 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.17 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.18 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.19 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.28 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.29 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.30 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.31 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.24 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.25 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.26 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.27 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.37 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.38 219 02a0.9945.bfec ARPA Vlan400
Internet 172.16.14.39 219 02a0.9945.bfec ARPA Vlan400
Is this allowed?Hi,
Yes - this is OK.
Many server guys use this method when a server with 1 Nic has different roles
1) Web server - ip add a.a.a.a
2) Print server - ip add a.a.a.b
3) shared drive - ip add a.a.a.c
and so on
Regards
Alex -
Cisco Catalyst 2960-X and Cisco Prime compatibility
Hello All,
I had review all the compatibility matrix of versions of Cisco Prime 1.2, 1.4 and 2.0, and just can't find the Cisco Catalyst 2960-X series as a listed device, which really surprises me.
Can you clear that out??
Thanks,The 2960X (and XR) support was added with Device Pack 2 for PI 2.0. It was released on 22 January 2014 and is available here.
(PI 2.1 won't be out until later this year, release date not yet announced.)
Following are the 2960X/XR types added:
Cisco Catalyst 2960-X Series Switches
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 2960X-24TS-L Switch
OID:1.3.6.1.4.1.9.1.1699
>=12.1
IOS
Cisco Catalyst 2960X-48FPD-L Switch
OID:1.3.6.1.4.1.9.1.1690
>=12.1
IOS
Cisco Catalyst 2960X-48LPD-L Switch
OID:1.3.6.1.4.1.9.1.1691
>=12.1
IOS
Cisco Catalyst 2960X-48TD-L Switch
OID:1.3.6.1.4.1.9.1.1692
>=12.1
IOS
Cisco Catalyst 2960X-24PD-L Switch
OID:1.3.6.1.4.1.9.1.1693
>=12.1
IOS
Cisco Catalyst 2960X-24TD-L Switch
OID:1.3.6.1.4.1.9.1.1694
>=12.1
IOS
Cisco Catalyst 2960X-48FPS-L Switch
OID:1.3.6.1.4.1.9.1.1695
>=12.1
IOS
Cisco Catalyst 2960X-48LPS-L Switch
OID:1.3.6.1.4.1.9.1.1696
>=12.1
IOS
Cisco Catalyst 2960X-24PS-L Switch
OID:1.3.6.1.4.1.9.1.1697
>=12.1
IOS
Cisco Catalyst 2960X-48TS-L Switch
OID:1.3.6.1.4.1.9.1.1698
>=12.1
IOS
Cisco Catalyst 2960X-24PSK-L Switch
OID:1.3.6.1.4.1.9.1.1700
>=12.1
IOS
Cisco Catalyst 2960X-48LPS-S Switch
OID:1.3.6.1.4.1.9.1.1701
>=12.1
IOS
Cisco Catalyst 2960X-24PS-S Switch
OID:1.3.6.1.4.1.9.1.1702
>=12.1
IOS
Cisco Catalyst 2960X-48TS-LL Switch
OID:1.3.6.1.4.1.9.1.1703
>=12.1
IOS
Cisco Catalyst 2960X-24TS-LL Switch
OID:1.3.6.1.4.1.9.1.1704
>=12.1
IOS
Cisco Catalyst 2960-XR Series Switches
Device Type
SYSOIDS
S/W Version
Software
Cisco Catalyst 2960XR-48FPD-I Switch
OID:1.3.6.1.4.1.9.1.1797
>=12.1
IOS
Cisco Catalyst 2960XR-48LPD-I Switch
OID:1.3.6.1.4.1.9.1.1798
>=12.1
IOS
Cisco Catalyst 2960XR-48TD-I Switch
OID:1.3.6.1.4.1.9.1.1799
>=12.1
IOS
Cisco Catalyst 2960XR-24PD-I Switch
OID:1.3.6.1.4.1.9.1.1800
>=12.1
IOS
Cisco Catalyst 2960XR-24TD-I Switch
OID:1.3.6.1.4.1.9.1.1801
>=12.1
IOS
Cisco Catalyst 2960XR-48FPS-I Switch
OID:1.3.6.1.4.1.9.1.1802
>=12.1
IOS
Cisco Catalyst 2960XR-48LPS-I Switch
OID:1.3.6.1.4.1.9.1.1803
>=12.1
IOS
Cisco Catalyst 2960XR-48TS-I Switch
OID:1.3.6.1.4.1.9.1.1804
>=12.1
IOS
Cisco Catalyst 2960XR-24PS-I Switch
OID:1.3.6.1.4.1.9.1.1805
>=12.1
IOS
Cisco Catalyst 2960XR-24TS-I Switch
OID:1.3.6.1.4.1.9.1.1806
>=12.1
IOS
Cisco Catalyst 2960XR-48FPD-L Switch
OID:1.3.6.1.4.1.9.1.1807
>=12.1
IOS
Cisco Catalyst 2960XR-48LPD-L Switch
OID:1.3.6.1.4.1.9.1.1808
>=12.1
IOS
Cisco Catalyst 2960XR-48TD-L Switch
OID:1.3.6.1.4.1.9.1.1809
>=12.1
IOS
Cisco Catalyst 2960XR-24PD-L Switch
OID:1.3.6.1.4.1.9.1.1810
>=12.1
IOS
Cisco Catalyst 2960XR-24TD-L Switch
OID:1.3.6.1.4.1.9.1.1811
>=12.1
IOS
Cisco Catalyst 2960XR-48FPS-L Switch
OID:1.3.6.1.4.1.9.1.1812
>=12.1
IOS
Cisco Catalyst 2960XR-48LPS-L Switch
OID:1.3.6.1.4.1.9.1.1813
>=12.1
IOS
Cisco Catalyst 2960XR-48TS-L Switch
OID:1.3.6.1.4.1.9.1.1814
>=12.1
IOS
Cisco Catalyst 2960XR-24PS-L Switch
OID:1.3.6.1.4.1.9.1.1815
>=12.1
IOS
Cisco Catalyst 2960XR-24TS-L Switch
OID:1.3.6.1.4.1.9.1.1816
>=12.1
IOS -
Just installed Firefox for my boss, and ran into something I've not seen before. When trying to access our private camera system, that uses specific ports, I got this message: "This address is restricted - This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection."
Cannot find a setting in Firefox to correct this problem. Please help.Hello,
Can you please check if either of these links help in the resolution of the issue
# [http://kb.mozillazine.org/Network.security.ports.banned.override Firefox ports override]
#[http://blog.christoffer.me/post/2012-02-20-how-to-remove-firefoxs-this-address-is-restricted/ Remove Firefox this address is restricted error]
Thank you -
Does anyone know the YAHOO authentication method and port? I recently installed the new OSX 10.8.2 software and my mac mail wont work.
Hello,
I have no idea what you're talking about, however my Mail stopped working when I
had to add a new e-mail address for my Hotmail account.
My new Hotmail address works, and seems to get e-mail from the old e-mail address,
which from I've read behaves as a "default" address for the old address.
Apple Mail is linked to my Hotmail account of the old e-mail address.
I no longer know my old password.
Apple Mail will not accept my new password for ny new Hotmail account.
Can someone help me solve this problem WITOUT COMPLICATED SOLUTION!
As I said I have no idea what a port, or SSL or authentication is!
If you do answer,please answer in vert simple steps that are easy to follow, and donlt make matters worse.
Thanks,
SB -
WLS9: address and port of a starting member?
Hi
I have a cluster running on different solaris 10 machines.
Each machine has different virtual interfaces:
myHostName1en1,myHostName1en2, myHostName2en1, etc... where myHostName#en0 is the standard network interface.
Cluster's members are always binded on an interface different from the standard one.
We restrict access to the admin server via connection filter so that only the addresses and ports of the members can access it. The problem is that a starting member (like every java process) makes its outgoing call from the standard interface(myHostName#en0).
Is there a way to tell the members that they should open the outgoing connection on a specifical interface and port via system properties?
Thank you in advance for your answer
Best RegardsCarlo de Rossi <> writes:
This is supported in WLS 9. Once bootstrapped the default listen
address should be used for outbound calls (or admin channel address if
configured). In order to route bootstrap calls over this address you
need to set the property -Dweblogic.admin.ListenAddress=<address> on
the command line of the booting server, where <address> is the address
you want to bind to outbound and should correspond to the regular
listen address when booted. You may also need to enable the admin port
/ admin channel for this to work.
andy
> Hi
> I have a cluster running on different solaris 10 machines.
> Each machine has different virtual interfaces:
> myHostName1en1,myHostName1en2, myHostName2en1, etc... where myHostName#en0 is the standard network interface.
> Cluster's members are always binded on an interface different from the standard one.
> We restrict access to the admin server via connection filter so that only the addresses and ports of the members can access it. The problem is that a starting member (like every java process) makes its outgoing call from the standard interface(myHostName#en0).
> Is there a way to tell the members that they should open the outgoing connection on a specifical interface and port via system properties?
> Thank you in advance for your answer
> Best Regards -
Hi
I have installed coheI have installed coherence server "fmw_12.1.3.0.0_coherence_Disk1_1of1.zip" along with Examples on windows machine and C++ client coherence-cpp-12.1.3.0.0b51709-windows-x86-vs2012.zip on the same machine.
I have built the "contacts" C++ Example successfully and while I execute this "contacts" using run I am facing TcpAcceptor error.
On my coherence server the TcpAcceptor is listening on port 8088, so I have modified the extend-cache-config.xml file with values "ip address of my windows machine" and port as "8088".
All the time I am getting below error,
coherence::net::messaging::ConnectionException: could not establish a connection to one of the following addresses: {10.242.152.242/10.242.152.242:8088}; make sure the "remote-addresses" configuration element contains an address and port of a running TcpAcceptor
at class coherence::lang::TypedHandle<class coherence::component::net::extend::PofConnection> __thiscall coherence::component::util::TcpInitiator::openConne
ction(void)(TcpInitiator.cpp:307)
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::net::messaging::ConnectionException: coherence::component::util::TcpInitiator::TcpConnection@029EAD78{Id=NULL, Open=1, LocalAddress=NULL,
RemoteAddress=10.242.152.242/10.242.152.242:8088}: socket disconnect
at class coherence::lang::TypedHandle<class coherence::net::messaging::Response> __thiscall coherence::component::net::extend::AbstractPofRequest::Status::g
etResponse(void)(AbstractPofRequest.cpp:203)
at coherence::component::net::extend::AbstractPofRequest::Status::getResponse
at coherence::component::net::extend::AbstractPofRequest::Status::waitForResponse
at coherence::component::util::Initiator::openConnection
at coherence::component::net::extend::PofConnection::open
at coherence::component::util::TcpInitiator::openConnection
at coherence::component::util::Initiator::ensureConnection
at coherence::component::net::extend::RemoteCacheService::openChannel
at coherence::component::net::extend::RemoteService::doStart
at coherence::component::net::extend::RemoteService::start
at coherence::component::util::SafeService::startService
at coherence::component::util::SafeService::restartService
at coherence::component::util::SafeService::ensureRunningServiceInternal
at coherence::component::util::SafeService::start
at coherence::net::DefaultConfigurableCacheFactory::configureService
at coherence::net::DefaultConfigurableCacheFactory::ensureService
at coherence::net::DefaultConfigurableCacheFactory::ensureRemoteCache
at coherence::net::DefaultConfigurableCacheFactory::configureCache
at coherence::net::DefaultConfigurableCacheFactory::ensureCache
at coherence::net::CacheFactory::getCache
at unsigned __int64 coherence::lang::class_spec<class coherence::lang::Managed<class ContactId>,class coherence::lang::extends<class coherence::lang::Object
,class coherence::lang::Void<class coherence::lang::Object> >,class coherence::lang::implements<void,void,void,void,void,void,void,void,void,void,void,void,void
,void,void,void> >::sizeOf(bool)
at _onexit
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at class coherence::util::Hashtable * coherence::lang::factory<class coherence::util::Hashtable>::create(void)
at BaseThreadInitThunk
at RtlInitializeExceptionChain
at RtlInitializeExceptionChain
on thread "main"
Caused by: coherence::io::IOException: socket disconnect
at unsigned int __thiscall coherence::net::Socket::readInternal(unsigned char *,unsigned int)(Socket.cpp:333)
at coherence::net::Socket::readInternal
at coherence::net::Socket::SocketInput::read
at coherence::io::BufferedInputStream::fillBuffer
at coherence::io::BufferedInputStream::read
at coherence::component::util::TcpInitiator::readMessageLength
at coherence::component::util::TcpInitiator::TcpConnection::TcpReader::onNotify
at coherence::component::util::Daemon::run
at coherence::lang::Thread::run
on thread "ExtendTcpCacheService:coherence::component::util::TcpInitiator:coherence::component::util::TcpInitiator::TcpConnection::TcpReader"We are facing same issue. Could you please provide us any working .Net sample code for the version 12.1.2.0.
<ssl>
<protocol>Tls</protocol>
<local-certificates>
<certificate>
<url>c:\Cert\</url>
<password>password</password>
<flags>DefaultKeySet</flags>
</certificate>
</local-certificates>
</ssl>
thanks
Bala -
How to determine which IP address and port is used to make DNS queries?
I am using JNDI/DNS API to query a Enum server (Tel URI resolution in VOIP world) what is a DNS server.
But I have many network interfaces, in a VLAN environment, and I must to specify from which interface (and port)
all the requests are sent.
When I read the code of JNDI/DNS API (in JDK 1.5) and specially the DNSClient class, I can see that the
DatagramSocket is created without parameters... : udpSocket = new DatagramSocket();
How can I specify the IP address and port to use for my client???
Thanks for your help.I must to specify from which interface (and port) all the requests are sent. You don't have to specify the interface unless your static unicast routing tables are incorrect, and you never have to specify the port unless some lunatic is in control of your firewall.
-
Should I get a 2.0 or 3.0 USB external hard drive for my 2011 Macbook Pro? I need it to be compatible with the USB ports of both a PC and a Mac. I was thinking of getting a Seagate becuase apparently it is compatible with both systems, but I want to know which would be a better investment.
Using USB 3 devices on Mac computers FAQ
-
Essbase1113 IP Address and Port Questions
hello,
everyone, i'm puzzled on a question about essbase.
it'll be so kind if you give me some suggestions.
in our project, we install EMP System 1113 on Win Server2003, but it's in local network. there is no problem when we connect it using client tools in local network environment.
however, we wanna connect the Essbase Server through Internet, we map the server address (such as 10.163.163.163) as an Internet address (such as 111.111.111.111).
we didn't use VPN such tools, and, the address is just a mapping, if we don't map the port, we couldn't connect the essbase server.
here comes the question, how do we map the essbase address and port ? i mean which port should we use, so that we could connect it through Internet ?
thank you so much.
wish to reply.
hawk.The ports that essbase use are outlined at :- http://download.oracle.com/docs/cd/E12825_01/epm.111/epm_install_start_here/ch06s05s01.html
Cheers
John
http://john-goodwin.blogspot.com/ -
Configuration for LDAP IP Address and Port for Exchange 2010
Let's say Exchange 2010 is installed on a computer that is joined to a domain. However, I would like to redirect LDAP authentication to another IP address and another port like how sharepoint implement it below
http://sharepoint.stackexchange.com/questions/33540/ldap-authentication-connection-string
Is it possible to do the equivalent for Exchange 2010?
Note: I would like to do this without installing any Edge Transport server or Microsoft Forefront TMGThe question I would need to ask is "Why would you need to do this?" I ask because Exchange requires an Active Directory account for authentication. That account may have permissions from some other directory (as in a linked mailbox),
but the account is used to find it. For SharePoint, you can authenticate to other directories directly. -
Changing the multicast Address and Port giving error
I am using Coherence 3.3.1 jar files (Coherence.jar and tangosol.jar) in my local application. But when I try to change the multicast Address and Port in tangosole-coherence.xml(in Coherence.jar) then it is giving this error -
"This member could not join the cluster because of an incompatibility between the cluster protocol used by this member and the one being used by the rest of the cluster. This is most likely caused by a Coherence version mismatch, or by mismatched protocol filters (e.g. compression, or encryption)"
If i am using unique IP and Port then how can it be in a Cluster as this error stating. Please reply ASAP.Hi,
There is a good chance that there is already the IP and port is being used by another cluster (which uses different versions of jars or configurations) and hence, when you are starting your cluster, throwing the error.
Can you double check if another cluster is already using it or not ?
Thanks,
Amit -
To know IP address and port no using DB Link
Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?user4587979 wrote:
Hi -
Is it possiable to know the IP address and port no of other oracle database that are connected with DB link. i.e for example
we have 2 oracle databases(For example A and B and it's schemas are A_A and B_B) on two different IP address and DB link is created on B database i.e using B_B user to access A database i.e A_A user. Now By using A database i.e A_A user can we know the IP and PORT NO of database B?you can also know the ip address and port number by tnsping command.
$tnsping B
eg:-
C:\Documents and Settings\rajesh-kg>tnsping TESTDB
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 07-JUN-2
011 18:44:48
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
D:\oracle\product\10.2.0\db_2\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xxxxxxxxxx)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SER
VICE_NAME = testdb)))
OK (50 msec) -
How to create more than one VIP use the same IP address and different port(e.g. 80 and 443)
Hi,
I use SCVMM LB Provider deploy network. I want to create 2 VIP use the same virtual IP but use the different port.
for example: VIP address 1.1.1.123 use port 80 for HTTP and port 443 for HTTPS
However,
the following problems encountered, when I create the second VIP.
PS C:\Windows\system32> New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -LoadBalancerVIPTemplate $VIPTemplate1 -LoadBalancerProtocol $Protocol1 -LoadBalancerHealthMonitor $HM1
New-SCLoadBalancerVIP : A virtual IP (VIP) address with the specified name (vip11) or
address (1.1.1.123) already exists on the load balancer (xxx). (Error ID: 13691)
Specify a different name or IP address and try again.
To restart the job, run the following command:
PS> Restart-Job -Job (Get-VMMServer localhost | Get-Job | where { $_.ID -eq
"{b41a77eb-ae0b-490a-8948-662a529b1d8c}"})
At line:1 char:1
+ New-SCLoadBalancerVIP -Name "vip11" -LoadBalancer $LB -IPAddress "1.1.1.123" -Lo ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ReadError: (:) [New-SCLoadBalancerVIP], CarmineException
+ FullyQualifiedErrorId : 13691,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.Ne
wSCLoadBalancerVIPCmdlet
PS C:\Windows\system32>
any suggestions ?
Thank you in advance !I really don't know DDE very well. It is usually recommended that you switch to using ActiveX. You may not be correctly configuring the netDDE server. There is an example in the reource library that shows how to do this. You may also want to look at the DDE advise examples that came with LabVIEW 5.1 and earlier.
-
Changing IP Address and ports in Directory Server 5.1 SP 4 and 5.2 SP4
I have installed multiple instance of Sun Directory Server 5.1 and 5.2 on ports 389 and 390,now I want to change the IP Address and ports, I am able to change the directory server port from 389 by editing the dse.ldif file, now I want to change the port 390 and the IP address same as directory server, can someone expert from the forum guide me.
Thanks in Advance.
Mukesh Kumar1) I don't know what you've typed in when installing... but I've never seen that message. Are you using any language specific characters ?
Do you get the error after this screen ?
<b>
The suffix is the root of your directory tree. You may have more than
one suffix.
Suffix [dc=sun,dc=com]:
</b>
If yes, then this means that the value you typed in is not a valid DN... and you must enter a valid one.
2)The Directory Server is installed under /usr/iplanet but the database is under /var/iplanet/ds5 and configuration is under /etc/iplanet/ds5 ...
You can use symbolic links if you want to move things around.
3) You mean you downloaded the tar.gx file of iDS 5.1 and install it on Solaris 9... No problem, I do this every day. As long as you have right to create directories and files, you should be able to install as anyone. If not, you should install as root and then let the server run as a special user.
4) Solaris 9 comes with iDS5.1 packages already installed. But the server is not configured at all.
Running directoryserver setup allows you to configure it and create the database, accounts...
Running directoryserver uninstall remove the instance of the installed database... It doesn't remove the packages. You can start again a setup...
By the way, I think that iDS 5.1 on Solaris 9 comes with the full documentation... May be you should start by reading it.
Regards,
Ludovic.
Maybe you are looking for
-
Woes of the Z10, and now i want to use it as a backup phone for my contacts and data. Can I?
Ok, this has been a real nightmare. I am an extensive user of BB since OS4. Wanted to try the new Z10, so I got myself a spanking new one. With my prior experience in switching devices, it would be a cinch. Transfer device over via blackberry desktop
-
How to setup NLS_LANG on Windows XP
Hi, We have an oracle database with character set AMERICAN_AMERICA.US7ASCII setting. and our production application inserts different language characters directly to the database without any UTF8 conversion. Another function has been coded which can
-
ERROR in configuration:more elements in file csv structure than filed names
<p ct="TextView" class="urTxtStd" style="white-space:nowrap;">Hello,<br>we have problem with file content conversion on file (FTP) sender<br>adapter when reading flat delimited file.<br><br>Error:<br>Conversion of file content to XML failed at positi
-
since the last update to 14.0.1 and updating plugins for adobe shockwave flash my internet connection dropped out. I have two other laptops, an Ipod touch and samsung phone on the same router and all work fine. I have connection to the router but dia
-
I rebooth my macbook pro and now its not letting me download osx mountain lion
..