Port Assignment SIA and CMS

Hi,
I need to change port assignment on SIA and CMS.
How do I change ports on these services?
Br,
Sonni

stop the sia and go into it's properties from the CCM. I believe they can both be set there as well as in the CMC > Servers > CMS
Regards,
Tim

Similar Messages

Query to get all ports assigned and used by EBS instance.

Hi,
Can some one pleaase help to get
Query to get all ports assigned and used by EBS instance.
Help is appreaciated.
Regards,
Milan

MILAN RATHOD wrote:
Hi,
Can some one pleaase help to get
Query to get all ports assigned and used by EBS instance.
Help is appreaciated.
Regards,
MilanIn addition to the thread referenced above by Helios, please check the context files and (Oracle E-Business Suite R12 Configuration in a DMZ [ID 380490.1] -- F. List of Ports to Open in a DMZ Configuration).
Thanks,
Hussein

Port assignment script availability?

Hi, I am wondering if there are any jython scripts available that will take a "starting port" value and then go and configure all of the ports within a new domain? I would like to be able to install a new domain, add any number of managed jvm's and nodemanagers and have this script configure the entire domain with wlst.

stop the sia and go into it's properties from the CCM. I believe they can both be set there as well as in the CMC > Servers > CMS
Regards,
Tim

After BI install SIA and Tomcat could not start with service account.

Hi BO Gurus,
I want to install BO child node (Expand the parent install)
Client IT prepared a system with MS Server 2012 with Windows 8 as OS, and assigned a Service Account for me.
I gave service account following permissions -
Act as a part of operating system
log on as a batch
log on as a service
After this I rebooted the system and logged in with Service Account credentials. Started the installer, performed custom/expand install.
the install was successful.
When I opened CCM, both Tomcat and SIA are running under 'localsystem' account.
I want them to run under service account --> i sopped SIA and changed credentials in 'Log on as' box under SIA properties.--> Click on 'apply' and 'OK'
When I go on and start SIA I get following error -
' The Service did not start due to log on failure'.
The same service account runs services on 3 other BO boxes including parent node of the above install and 2 other DS boxes and everything apart from this machine works exactly fine.
Please help!
Thanks,
Maitreyee

Maitreyee,
BI 4.x Platform will NOT work on Desktop OS like Windows 7 / 8.x / 8.1, it required 64bit Server Operating system. See attached screenshot.
Regards,
Ajay

VLAN Port Assignment failed on Campus Manager 5.1

Dear All,
i deploying LMS 3.1 in my organization.
I finalized the installation and all looks fine BUT when i try to assign a port to a different VLAN in Campus Manager (5.1) i am getting the following error message.
There were some errors during operation."
Error occured moving port Gi1/8 in device 10.x.y.z into vlan with index XY.
Cause:An error occured while performing SNMP operation.
Action:Examine and save the server log file and report the error to the product administrator for further action.
VLAN Port Assignment failed
any idea?
here is simply the config related to SNMP on my switch.
snmp-server community XXXXXXXX
snmp-server host 10.X.Y.Z version 2c XXXXXXXX
snmp-server enable informs
snmp-server enable traps
do i miss anything else? any recommendation? Why i am getting that error message?
Thank you for your support and asistance.
Kind Regards,
mico

Hi Joe,
thank you so much for your kind reply. I configured the snmp RW community string on the switch matching the credentials on the LMS server but still getting the same error message when i try to assign ports no a different VLAN
here is my commands for the switch:
snmp-server community xxxxxx ro
snmp-server community yyyyyy rw
snmp-server host x.y.w.z version 2c yyyyyy
snmp-server enable informs
snmp-server enable traps
and on the LMS server i set the values:
snmp-server community xxxxxx ro
snmp-server community yyyyyy rw

Hp officejet j6450 port assignment changes each time i start up.

When I startup, the printer always comes up in "offline status", and I cannot figure out how to reset to online. The problem seems to be that each time the printer syncs up with the wireless router, the port assignments change, so I have to "discover" the correct port and reset that via the Windows control panel properties for the printer. How can I set this such that the port assignment remains constant? or is there some simpler solution? Thanks.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Port assignment for Online library

I'm sitting behind a rather stern firewall and it's blocking
access to Device Central CS4's Online Library. I need to know the
port assignement for the feature in order to request access from
our IT staff. Any info on this question will be greatly
appreciated.

WorldofCables One Stop Store for USB Cables, DVI Cables,
Firewire Cables, Monitor Cables, Adapters, PC Cables, Connectors,
Audio Video Cables, Gaming Accessories, PDA & Phone
Accessories, iPOD Accessories.
http://www.worldofcables.com/store/default.asp

%SW_MATM-4-MACFLAP_NOTIF: Host 3270.990a.a504 in vlan 125 is flapping between port Fa0/21 and port Gi0/1

%SW_MATM-4-MACFLAP_NOTIF: Host 3270.990a.a504 in vlan 125 is flapping between port Fa0/21 and port Gi0/1
Please suggest me how can i fixed it ?

Sachin,
those are by no mean errors! they are informative messages which, in some circumnstances, can represent issues.
As I wrote in step 1, very first step is to determine how often you see a given mac flapping between 2 interfaces.
How often do you see that?
I am reiterating the concept as, according to your description, what you see can be pretty normal in your scenario.
Maybe it is worth clarifying that the message only means that a frame learned via Fa0/21 is now seen from Gi0/1. In static and stable networks traffic from a given host should always come from the same path and therefore should not be re-learned from another port. Every time a switch notices that a MAC which was previously learned from a port is now seen and learned from another one it trigeers that message as this behaviour might represent an ongoing L2 loop, but as I wrote this is not always true.
However since you have an AP connected to Fa0/21 it is likely that a host with mac 32:70:99:0a:a5:04 was connected to it for some time, and then it browsed and connected to another AP. This is why your switch started seeing traffic from that mac coming from a distribution/switch switch connected to gi0/1, as the l2 path changed.
I was not able to find the vendor of 32:70:99 as this is not an assigned OUI. Also since this is an unicast locally administered address it could besome kind of application/protocol using it.
What you have to do is
- Check in stable condition where this mac is learned from, that is following it switch by switch until you find the port. Since it comes from an AP most likely it is learned from the radio antenna of the AP. You need to check wheter this is an addressed learned over the radio or local to your motorola AP.
- Once you identify you you will be able to udnerstand why it flapped.
Having said that you will understand that the majority of your questions don't have too much sense now.. however
1. They are messages and not errors. see above why you see them.
2. Check on APs mac address table and see where that address is learned from. I don't know if your AP has some kind of mac notification feature logging all the changes. This is somethign you have to work out yourself. The focus is to first understand what is the mac address in the first place.
3. This question means nothing. If the flapping address is the mac of some kind of wireless NIC (laptop, smartphone etc.) you cannot prevent users from moving from a site to another. This is waht wireless networks are about. Still, sporadic flapping messages are expected as they just represent how the network is being utilized and you cannot fix them as there is nothing to fix.
4. The message itself has no impact. If they represent users moving from a wireless location to another there is no harm. If they are continuous and are not related to wireless networks they might indicate a L2 loop. To verify that you need to look for other symptoms which normally are associated with l2 loops: high cpu on the switches in the path, interface drops (on l2 and l3 interface, if present), increasing STP TCNs (not all the times), unstable STP topology, unstable control plane, similar logs logged in all/many switches. Some or all symptoms can occurr.
5. plenty.... google it and spend some time reading the docs you find
Riccardo

LMS 4.0 VLAN Port Assignment Cat3750X

Hello together
Have installed LMS 4.0 at a customer. The main switches he uses are the following ones:
WS-C3750X-24P-S (1.3.6.1.4.1.9.1.1224)
First problem I faced was with lack of support for Cisco View and the mentioned device. This is fixed with the following package Cisco View Device Update: Cat3750.cv50.13-0.zip. Have tested this today.
But now to my new problem. One reason for Cisco View usage is VLAN assignement. Unfortunately this is not supported with the Cat3750 devices and Cisco View like with other devices. So I thought I show the customer how to do it with the VLAN Port Assignement:
Configuration > Workflows > VLAN > Configure Port Assignment
Unfortunatly it seems that this is not supported with these devices. From the following document I can't find something which underlines the lack of support: http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.0/device_support/table/lms40sdt.html#Cisco Catalyst 3750 Series Switches
It even seems it should be supported. See picture in the bottom from the above link.
My question to the community:
- Does anybody else have the same switches? If yes, does Configure Port Assignment work in LMS 4.0
- @Cisco, is this feature really not supported with the following device: WS-C3750X-24P-S? If yes, are any patches planned with release date.
Thanks for any feedback.
Erich

Hi Joseph
Thanks for your feedback. Have asked the customer to do the following steps and send me a screen shot:
- Configuration > Workflows > VLAN > Configure Port Assignment
- Select Domain Selector
- Choose a Domain of a Switch C3750X
- Click on List Ports
Actually the same thing what I have done during my installation Onsite. When I have done the above steps I only have received a empty windows. Now, a week later it seems to work. Enclosed a screen shot with evidence for all those you have the same devices in use.
Happy that it works. Funny, that it didn't worked when I was onsite. Sorry for the inconvenience and thanks for your feedback / support.
Erich

"Device connected to USB port has malfunctioned and is not recognized"

When I hooked my nano up to my computer today, the screen went black with a silver apple icon on it...it's still all lite up and on...but it won't change from that screen.
And my computer says, "Device connected to USB port has malfunctioned and is not recognized", so it won't show up in iTunes.
What do I do?? Thanks.
Windows

iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.

To Assign role and flavor in SAP PERSONA 2.0

In SAP Screen Persona 2.0, through t-code /persos/admin_ui -> I'm trying to assign a flavor to the user only to view. To do this, I created a group under Group maintenance -> included the user name under user tab -> given the flavor name under shared flavor - > under system tab, given the system and selected assign flavor-> mentioned the flavor name and selected the default check box.In SU01-assigned the role as renderswitch. Its not working.Can anyone help on this?

Yes, i log out and checked. Not working. below are the steps i have done. I'm getting an error message.
In SAP Screen Persona 2.0, through t-code /persos/admin_ui -> Under Use Maintenance - > I assigned a user, systems and role ( as "RENDER_FLAVORSWITCH") . Next step -> Under Group maintenance-> Created a group -> assigned system, user, and flavor as below.Then i log into the assigned user and checked the t-code MM03. Below is the error message i'm getting. Assign flavor option and role is not working. How to correct this?

E1200 - Ports not working and mac filtering problem

If there was a way to give negative stars to this router, I would. As it is, the minimum rating I can give this product is one star, and that's one star too many.
I was upgrading from the WRT54G, which is an ugly thing to look at, but a reliable workhorse nonetheless. I turned that in to a downstream switch in my comms hub.
On the E1200, I flashed the latest firmware, used different Cat5 cables, and different laptops before committing to hating this product.
The first time I reached out to Amazon, the Amazon rep gave me a Cisco number to call. Turns out, that's some shady mortgage refinance hotline. Try it for yourself! 1-800-666-1771.
Now, the rant -
1. Two out of four wired LAN ports don't work: What can be the fix for this?! The activity lights on ports 3 and 4 blink and suggest data transfer is taking place, but the wired laptop simply can't acquire an IP address and access the internet. Same result when I connect my Panasonic Blu-Ray player to ports 3 and 4. None of the Viera Cast features load.
2. MAC filtering unreliable: The wireless routing works somewhat reliably, if and only if, one settles for the most basic security. If I only choose a password and WPA2 protocol, things work fine. If I add another layer of security (in my case, enabling MAC filtering and only PERMITTING gateway to listed MAC IDs), things break down. As soon as I disable MAC filtering, wireless access to authenticated clients is restored.
3. Cisco customer service: The censored world we live in, compels me to criticize politely. TERRIBLE. Cisco website is unintuitive, and frustrating. There's no easy way to register your purchased product. The Cisco "registration" is intentionally misleading and deceptive. For all intents and purposes, it's just an information gathering tool for Cisco. Don't bother registering there, unless you love the idea of storing your personal information on their servers. Their phone-based customer service is apathetic and uninterested. My rep was so distrusting of my intelligence and motor control, that he simply wouldn't believe that I had selected "PERMIT" and not "PREVENT" as the option under MAC filtering. After he asked me the same question for the fourth time, I raised my voice, and he gave up the idea of checking for the fifth time.
However, this review is a tale of two companies. I reached out to Amazon again. This time, I got a rockstar in the shape of Leanne C! She was incredibly helpful, and understanding. What's more, she set up my return without any hassle and this Cisco dud is on its way back. I'm a big fan of Leanne's and my confidence in Amazon is restored.
I'm sure that i received a lemon. I've never had problems with Linksys products. Maybe others' experience is different from mine.

In your case as port numbers 1 and 2 does not work, what you could have done a loop back test. To perform a loop back test you need to take an ethernet cable, connect one end of that cable to internet port and the other end to the non-working port on the router. If you get the led to glow on both internet and the respective ethernet port that indicates that the port is working fine.
It could also be a sychronization issue between the above mentioned lan ports and the lan card of your computer. As a part of trouble shooting you can try to reduce the card speed of your lan card. Following are the steps to reduce the speed of your lan card.
START--> right-click My Network Places and click Properties
right-click on the device manager and click properties
Click on the CONFIGURE button
Select the ADVANCED tab and in the box under the header property select "speed and duplex" and change the value on the right to 10 mbps half duplex. A restart would be recommended after performing these steps.
In the second half you said that after enabling the mac filter option the internet breaks down. Here, do you mean to say that the computer
gets disconnected from the wireless network or it stays connected with a valid IP address but without an internet connection.
Well, it is an unusual issue however you could have reset and reconfigure the router as you got the latest firmware upgraded on it.
Steps to reset the router:
Push the reset button on router for 30 seconds, turn off the router wait for 30 seconds and then power it on. Power light should blink when you perform the reset process.

Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

Hi. My air port is connected and wifi is working but i cannot connect to the time capsule to access any files stored there

How to configure DTR,CBS and CMS?

hi all,
I am working with SneakPreview (EP7.0).Is it possbile to configure DTR,CBS and CMS on sneskpreview ? Can any one tell me the procedure to configure ?
Thanks&Regards
Suresh

Hi,
pl go through this article
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f37d7e6a-0b01-0010-6690-8f4403b810cf
Regards
Ayyapparaj

Battery charging by usb port on PC and adapter which is better

Please help me
Battery charging by usb port on PC and adapter (enclosed with IPHONE box )which is better?
Regards

Adapter is probably quicker as you have slightly better power than from a USB socket

Port Assignment SIA and CMS

Similar Messages

Maybe you are looking for