Port could not be created in SAP r/3

HI sap gurus...
 I am trying to do this scenario..IDOC-XI-JDBC In this ....from SAP R/3
SAP R3 SAP NW XI
1. Define Logical system - BD54 1. Define Logical system - BD54
MATLO
GR3 MATLOGR3
MATLOGXI
MATLOGXI
2. Assign logical System to Client 2. Assign logical System to Client - SCC4
Here assign both the logical system Here assign both the logical system
are assigned to client 800 are assigned to client 100
MATLOGR3 MATLOGR3
MATLOGXI MATLOGXI
3. Create RFC destination of type 3 for SAP XI system using transaction SM59:
RFC Destination : MATLOGXI RFC Destination : MATLOGR3
Connection Type : 3 Connection Type : 3
Target Host : ECCSERVER Target Host : ECCSERVER
System Number :01 System Number : 00

up to this successful...
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
|
.-> "ALE configuration for pushing idocs from SAP to XI"
I am following this blog....
here while creating the partner profile .. i am getting an error
like this
under port tabular column
i am getting an error that
Log for Partner Profile Generation
Partner
System MATLOGR3 System MATLOGR3 as a partner type already exists
System MATLOGXI System MATLOGXI as a partner type already exists
Port
System MATLOGR3 Port could not be created
RFC destination MATLOGR3 not specified for system MATLOGR3
 Enter the RFC destination and restart the generation 
Inb. Parameters
System MATLOGR3 Inbound parameters for message type MATMAS already exist

Hi
1. Go through these documents for the settings that need to be done.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.do
2. Check out whether you assigned logical systems to your clients.Next check the ports(for inbound and outbound) also in we20.And also go through the link below.
http://www.sappoint.com/abap/ale.pdf
3. Might be you have not created the RFC destination from your target system.
say for eg if u have two systems sys1 and sys2.
you need to create RFC destination for sys2 from sys1 and viceversa before generating Partner Profile

Similar Messages

Port could not be created

Hi gurus,
While creating ALE partner profiles from R/3 , I am getting the following error.
Port could not be created
RFC destination SRMCLNT100 not specified for system SRMCLNT100
Enter the RFC destination and restart the generation
I have created the RFC destination from R/3 as wellas from SRMclinet 100 and could be able to remote logon to the respective systems. I am able to create partner profiles from SRMclient 100 but I could not do it from R/3.
Pl give your advice.
SS

Hello,
We defining ALE Distribution models, we add message types between 2 logical systems.
When generating the partner profile from this view, the system tries to use an RFC destination with exactly the same name as the logical system.
In your case, it does not find the RFC destination SRMCLNT100 in R/3.
A workaround is to maintain the partner profiles manually :
WE20 to maintain partner profile
WE21 to maintain ports
Rgds
Christophe

ALE-Port could not be created

HI,
Could someone tell me why and how to fix my issue,
when i generating partner profile (ALE process) there is a error :
"Port could not be created
RFC destination D010500 not specified for system D010500
Enter the RFC destination and restart the generation "
Thanks & Regards,
Saiful arif

Hi
Follow the given sequence for ALE settings :
Steps to be done:
Steps for XI
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the R3 system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto IDX1.
Create a new port.
Give the port name.
Give the client number for the R3 system.
Select the created Rfc Destination.
Step 3)
Goto IDX2
Create a new Meta data.
Give the Idoc type.
Select the created port.
Steps for R3.
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the XI system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto WE21.
Create a port under transactional RFC.(R3->XI)
Designate the RFC destination created in prev step.
Step 3)
Goto SALE.
Basic settings->Logical Systems->Define logical system.
Create two logical systems(one for XI and the other for R3)
Basic settings->Logical Systems->Assign logical system.
Assign the R3 logical system to respective client.
Step 4)
Goto WE20.
Partner type LS.
Create two partner profile(one for XI the other for R3).
Give the outbound or inbound message type based on the direction..
hope this helps you out :
Regard's
Chetan Ahuja

FILE /usr/sap/trans/bin/DOMAIN.CFG could not be created

Hi
After a DB copy into the QAS system the TMS will not connect to QAS. I set the CHGR3SHLOC to the domain controller and ran SE06 to delete and reset the TMS as DDIC in client 000.
When I run TMS on the QAS box and try to include QAS in the DOMAIN_DEV I get the message
FILE /usr/sap/trans/bin/DOMAIN.CFG could not be created.
I have all the QAS accounts on the TMS domain controller and they have the same password on both systems.
Any one else had this one? Its v5r3 and 4.6c releases.
Thanks
Matt Milne
Freelance SAP BASIS Consultant

Hi Matt,
I'm pretty sure, you are missing one:
sidnn ...
Change this user on QAS so that you can logon and logon and try to edit the following file:
edtf '/usr/sap/trans/bin/test.txt'
I guess, you run into the same issue ... that needs to be fixed first ... most likely the wrong password for this user (default: sapNNpwd)
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharath

hi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath

I am having issues with Time Machine. Error message "The backup disk image could not be created.

Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-A

How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A

RFC Send could not be resolved against SAP system because its metadata could not be obtained...EXCEPTION FU_NOT_FOUND RAISED

Hello,
I am getting the following error in sending IDOC to SAP via WCF-SAP adapter in BizTalk Server 2009. I have the SOAP header in the adapter mentioned below. Also, wondering what is the convension for Action URL? Is it always "http://Microsoft.LobServices.Sap/2007/03/Rfc/"
+ Operation name mentioned in the Orchestration? I would appreciate if anyone could help me resolve this error.
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False".
It will be retransmitted after the retry interval specified for this Send Port. Details:"Microsoft.ServiceModel.Channels.Common.MetadataException: RFC Send could not be resolved against SAP system because its metadata could not be obtained. ---> Microsoft.Adapters.SAP.RFCException:
Details: ErrorCode=RFC_EXCEPTION. ErrorGroup=RFC_ERROR_APPLICATION_EXCEPTION. SapErrorMessage=EXCEPTION FU_NOT_FOUND RAISED. AdapterErrorMessage=An error occurred while determining the function interface of the RFC Send.
at Microsoft.Adapters.SAP.RFCException.HelperThrow(Int32 retCode, String additionalErrorMessage)
at Microsoft.Adapters.SAP.RfcClientConnection.GetRfcFunctionInterface(String rfcName)
at Microsoft.Adapters.SAP.InternalRfcMetadata..ctor(String originalRfcName, SAPConnection sapConnection)
at Microsoft.Adapters.SAP.SAPMetadataContract.ResolveOperationMetadata(String operationId, TimeSpan timeout, TypeMetadataCollection& extraTypeMetadataResolved)
at Microsoft.ServiceModel.Channels.Common.Design.MetadataCache.GetOperationMetadata(String uniqueId, Guid clientId, TimeSpan timeout)
at Microsoft.ServiceModel.Channels.Common.MetadataLookup.GetOperationDefinition(String operationId, TimeSpan timeout)
at Microsoft.Adapters.SAP.SapFunctionMetadata.ResolveOperationMetadataUsingSdk(String absoluteName, String displayName, String funcName, String operationNamespace, SAPConnection sapConnection, Boolean isTrfc, MetadataLookup metadataLookup, TimeoutHelper
timeoutHelper)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndRequest(IAsyncResult result)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.Channels.IRequestChannel.EndRequest(IAsyncResult result)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.RequestCallback(IAsyncResult result)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
SOAP Header:
<BtsActionMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<Operation Name="Send" Action="http://Microsoft.LobServices.Sap/2007/03/Rfc/Send" />
</BtsActionMapping>
Thanks,
Tarun

Hello Morten,
The Send is actually just the name of the operation in Orchestration and it does not exist in SAP. Hence, do I really need to have the SOAP header in WCF-SAP adapter or can I send the IDOC without any SOAP header info? When I try to send without
SOAP header I get the following error. Can you help me resolve this?
The adapter failed to transmit message going to send port "SendReceive_PO_IDOC_TO_SAP" with URL "sap://CLIENT=111;LANG=EN;@a/123.456.789.101/00?GWHOST=123.456.789.101&GWSERV=sapgw00&ListenerProgramId=ABCDEF111&RfcSdkTrace=False&AbapDebug=False". It
will be retransmitted after the retry interval specified for this Send Port. Details:"System.ArgumentNullException: Value cannot be null.
Parameter name: key
at System.ThrowHelper.ThrowArgumentNullException(ExceptionArgument argument)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.CreateChannelFactory[TChannel](IBaseMessage bizTalkMessage)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2.InitializeValues(IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient`2..ctor(IBaseMessage message, WcfTransmitter`2 transmitter)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfTransmitter`2.GetClientFromCache(String spid, IBaseMessage message)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfAsyncBatch`2.BatchWorker(List`1 messages)".
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Thanks,
Tarun

RFC Destination could not be created in TREX administration tool

Hi All,
Recently i installed the TREX server, I am trying to connect the ABAP system with the RFC connection. I entered all necessary data for the RFC connection it giving error as
RFC Destination could not be created.
To solve the above problem i created one RFC connection of type TCP/IP in ABAP server eventhough it is not solved.
Can i have the solution for the above problem?
Regards,
Vivek.

Hi Michale,
Thanks for your quick response; I tried all the mentioned possibilities in that help document, still i am facing the same problem.
It is giving the below error
Connect to SAP System failed.Possible reasons:
-Logon data incorrect
-Password is not uppercase(must also be uppercase)
-SAP system user locked
-SAP user not in specified client
-SAP User rights are insufficient
-SAP system not reachable
-saprfc.ini unavailable or entries incorrect
-TREXTcpipClient.ini section[communication],parameters rfcdestination, sapsystem not set
-SAP system Basis component below 6.20 or SP too low
-->check also latest TREXTcpiplient trace file entries.*
The above all are check by me everything is fine.
The below information from the saprfc.ini file
DEST=NPI
TYPE=B
MSHOST=server1
GROUP=server1_group*.
Is there any mistake, please let me know.
Regards,
Vivek.

RFC destination BW could not be created in the source system

Hi,
Recently I installed BI 7.0 on Win 2003 and try to create a SAP system in RSA1.
I try to connect R/3 system (on UNIX) and getting RFC connection error u201CRFC user logon failed. Check the connection.u201D & u201CRFC destination BW could not be created in the source systemu201D. However, I test the connection and it is working fine.
Please suggest the solution.
Regards,
Rajesh

Rajesh,
Answer is very simple. I did get same kind of problem. It is very simple answer depending on your R3 version.
Use password all capital letters. Don't include any small letter at all. unlock your user id and change password to capital letter. BW doesn't like small and capital letter mix. this bug is fixed in ECC 6.0
<removed_by_moderator>
*Do not ask for points
Read the "Rules of Engagement"
Regards
RK
Edited by: Juan Reyes on May 21, 2009 9:30 AM

PARCONV phase Index could not be created ERROR

Upgrading Solution Manger 3.2 to 7.0 Windows Nt SQL Server 2000
We are in teh PARCONV phase now and getting errors regarding tables with missing indexes.
Example from PARCONV.ELG file:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
CONVERSION ERRORS and RETURN CODE in NCONV00.TS3
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2EEGT236 The SQL statement was not executed
2EEDI006 Index " " could not be created completely in the database
Long text:
 Cause
 It was not possible to create the index in the database.
 This could be caused by the fact that an index with the same name
 exists in the database, but it is unknown to the ABAP/4 Dictionary.
 Activating the index in the ABAP/4 Dictionary is possible, but it is
 not possible to create it in the database.
 System Response
 What to do
 For more information about the cause of the error, analyze the SQL
 error messages in this log.
2EEGT221 Creation of secondary indexes for table "BBP_PDHGP" failed
Long text:
 Cause
 There might be a SQL error.
 System Response
 What to do
 Check the SQL codes for errors.
2EEGT239 Error in step "BBP_PDHGP-STEP6"
2EEGT094 Conversion could not be restarted
Long text:
 Cause
 The conversion could not be restarted, i.e. it was not possible to
 continue the conversion at the point where it was interrupted.
 System Response
 What to do
 Information about the cause of the error can be found in the restart
 log.
2EEGT236 The SQL statement was not executed
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have gone into se14 the index name exists but the index doesn't exist on the database. I've tried using the Create to create teh index on the databse but that fails with a name may already exist.
How to I clear these errors?
Thanks
Laurie McGinley

It appears on all the ABAP Dictionary: Restart Log List, that the same error is occuring on creating the secondary indexes...
Database error 170 at EXE
Line 1: incorrect syntax near '('
Same error occurs if I use the SE14 to "Continue Adjustment".
Note 1180553 u2013 Syntax error 170 during index creation on SQL 2000 and
Note 1346662 u2013 Avoid index creation errors in 7.0 EHP and higher upgrades.
Note 1365755 - Scripts to fix fillfactor issues on SQLServer 2000
These seem to be the key.... but...
I ran the scripts in 1180553 ... no change in the errors. In fact, there isn't a dbo.[TATAF~] table and the dbo.[TATAF] table doesn't have the 'With fillfactor" entry. So i wonder if I'm at a different phase?
I'm looking at 1365755 and think I'd like to give that one a try, but it says to unpack the ZIP file in the <upgr dir>\abap\bin directory. Well there isn't one. I have the upgrade dir \usr\sap\put and its subdirectories, but no \abap\bin dir.
So I'm not sure where to unpack this to give it a try.
Perhaps it would be better to go back to teh beginning of the UPGRADE (after PREPARE) and start again?
I didn't upgrade to SQL Server 2005 because the version of SolMan we are on isn't certified on it, so thought I'd get through the Sol Man upgrade then do SQLServer 2005... maybe need to rethink this to?
I'm open you suggesions, ideas, answers!
Thanks
Laurie McGinley
Edited by: Laurie McGinley on Sep 28, 2009 12:23 PM

BPM Error:Runtime handle of object type could not be created:CX_MERGE_SPLIT

HI Guys...
I am working on a RFC to HTTP scenario:
It is a standard SAP interface ....so we created only ID objects..obviously the BPM delivered by must be correct.
in sxmb_moni_bpe it is throwing th following error texts:
Runtime handle of object type could not be created
Error executing service for node
Exception CX_MERGE_SPLIT occured
component mapping has returned an error
unmodeled exception when executing service for node
No payload found
object FLOWITEM method EXECUTE cannot be executed
I tested the mapping payload from sxmb_moni in IR and it is working fine.
Receiver is an HTTP so could not able to find exactly whats happening as no thrid party tools can be installed....struck up here.
Any iputs will be of help in this area.
Thanx in adavance.
Kiran

any inputs around this plz??

PO could not be created

Hi All,
PO could not be created, document contains no items, message id 06,#10, error in external tax system: no mapping could be located for input function. Message id is FS, message #861.
Please help.
Thanks in Advance.

Hi
Please refer the following link which explaining all the statuses of WBS elements and also statuses which are required by you
http://help.sap.com/erp2005_ehp_02/helpdata/en/ee/41f82246ee11d189470000e829fbbd/frameset.htm
Regards
Ramakrishna

The Configuration Area could not be created (HANA Studio)

This message is posted in case some else comes across this issue. After installing the SAP Hana Studion, I was continually receiving the following message:
"The Configuration Area at 'c:\Users\U\.eclipse\org.eclipse.platform_3.5.0_1152700900\configuration' could not be created. Please choose a writable location using the '-configuration' command line option'.
After trying to mess around with the command line option, I found that I needed to run the Hana Studio as an Administrator. ie, right click on the HANA Studio icon and select 'Run as Administrator' from the context menu.

If this is a new setup discard existing web application along with site and content database. Recreate the same web application and try provisioning PWA with new databases
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful if a post has been useful to you.This can be beneficial to other community members reading the thread.

(Solved) Workflow System Verification Step 4: workitem could not be created

Hello all
We're on R/3 4.7 and I'm trying to get workflow runtime environment up and running. I've already passed through the automatic customizing (SWU3), all is green!
When starting the verification workflow I get a mail in my SAP Workplace inbox telling me something about error WL 410.
In the workflow log I can see this (had to translate it from german, so please bare with me if wording in english is not absolutely correct):
green -> Start event received
green -> (sub-)workflow created
green -> workflow started
green -> SWW_WI_ERROR_MESSAGE_SEND_S
red   -> Callback vom Workitem ausgeführt
red   -> GET_DEADLINE
red   -> SWW_WI_STATUS_CHANGE
Clicking on the first red light pops up a message telling me something like that:
Workflow 'Workflow-System-Verification' Step n° 4: Workitem could not be created
The long text message of this and the workflow protocol tells nothing more.
Anyone out there able to help me on this issue?
Kind regards,
Renaud

Hello Alan
Yes, this nearly made me crazy. Posted a customer message to SAP concerning this in parallel last week and also sent them some screenshots. They also advised me to move unit H from (non standard) dimensionless to dimension "time". This corrected it as already mentioned before.
I did several workflow activations before and never had any problems with automatic customizing and the verification workflow... until I came across this system here. Also on all other systems known to me the unit H was never dimensionless. Double checked it last week as well. Probably someone else fiddled around in CUNI without knowing what he or she was doing? Will probably never find it out. I just hope that this was an exception! Else...
Some extra points would be great of course )
Thanks and kind regards,
Renaud

Index could not be created

Hi All.
I have instaled TREX and then declared the name server and port in visual admin and restarted portal
But still getting the error
Index could not be created; creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Any suggestions or procedure to integrate portal with TREX ?
Thanking You,
Rukmini

Hi,
if this is your exact error message:
creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Than you have not changes the value <trexhost> do your real trex name server host name.
And that's why all the lights in TREX monitoring from your application point of view must be red.
Best regards
Frank

Port could not be created in SAP r/3

Similar Messages

Maybe you are looking for