Port could not be created

Hi gurus,
While creating ALE partner profiles from R/3 , I am getting the following error.
Port could not be created
RFC destination SRMCLNT100 not specified for system SRMCLNT100
Enter the RFC destination and restart the generation
I have created the RFC destination from R/3 as wellas from SRMclinet 100 and could be able to remote logon to the respective systems. I am able to create partner profiles from SRMclient 100 but I could not do it from R/3.
Pl give your advice.
SS

Hello,
We defining ALE Distribution models, we add message types between 2 logical systems.
When generating the partner profile from this view, the system tries to use an RFC destination with exactly the same name as the logical system.
In your case, it does not find the RFC destination SRMCLNT100 in R/3.
A workaround is to maintain the partner profiles manually :
WE20 to maintain partner profile
WE21 to maintain ports
Rgds
Christophe

Similar Messages

Port could not be created in SAP r/3

HI sap gurus...
 I am trying to do this scenario..IDOC-XI-JDBC In this ....from SAP R/3
SAP R3 SAP NW XI
1. Define Logical system - BD54 1. Define Logical system - BD54
MATLO
GR3 MATLOGR3
MATLOGXI
MATLOGXI
2. Assign logical System to Client 2. Assign logical System to Client - SCC4
Here assign both the logical system Here assign both the logical system
are assigned to client 800 are assigned to client 100
MATLOGR3 MATLOGR3
MATLOGXI MATLOGXI
3. Create RFC destination of type 3 for SAP XI system using transaction SM59:
RFC Destination : MATLOGXI RFC Destination : MATLOGR3
Connection Type : 3 Connection Type : 3
Target Host : ECCSERVER Target Host : ECCSERVER
System Number :01 System Number : 00

up to this successful...
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
|
.-> "ALE configuration for pushing idocs from SAP to XI"
I am following this blog....
here while creating the partner profile .. i am getting an error
like this
under port tabular column
i am getting an error that
Log for Partner Profile Generation
Partner
System MATLOGR3 System MATLOGR3 as a partner type already exists
System MATLOGXI System MATLOGXI as a partner type already exists
Port
System MATLOGR3 Port could not be created
RFC destination MATLOGR3 not specified for system MATLOGR3
 Enter the RFC destination and restart the generation 
Inb. Parameters
System MATLOGR3 Inbound parameters for message type MATMAS already exist

Hi
1. Go through these documents for the settings that need to be done.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.do
2. Check out whether you assigned logical systems to your clients.Next check the ports(for inbound and outbound) also in we20.And also go through the link below.
http://www.sappoint.com/abap/ale.pdf
3. Might be you have not created the RFC destination from your target system.
say for eg if u have two systems sys1 and sys2.
you need to create RFC destination for sys2 from sys1 and viceversa before generating Partner Profile

ALE-Port could not be created

HI,
Could someone tell me why and how to fix my issue,
when i generating partner profile (ALE process) there is a error :
"Port could not be created
RFC destination D010500 not specified for system D010500
Enter the RFC destination and restart the generation "
Thanks & Regards,
Saiful arif

Hi
Follow the given sequence for ALE settings :
Steps to be done:
Steps for XI
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the R3 system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto IDX1.
Create a new port.
Give the port name.
Give the client number for the R3 system.
Select the created Rfc Destination.
Step 3)
Goto IDX2
Create a new Meta data.
Give the Idoc type.
Select the created port.
Steps for R3.
Step 1)
Goto SM59.
Create new RFC destination of type 3(Abap connection).
Give a suitable name and description.
Give the Ip address of the XI system.
Give the system number.
Give the gateway host name and gateway service (3300 + system number).
Go to the logon security tab.
Give the lang, client, username and password.
Test connection and remote logon.
Step 2)
Goto WE21.
Create a port under transactional RFC.(R3->XI)
Designate the RFC destination created in prev step.
Step 3)
Goto SALE.
Basic settings->Logical Systems->Define logical system.
Create two logical systems(one for XI and the other for R3)
Basic settings->Logical Systems->Assign logical system.
Assign the R3 logical system to respective client.
Step 4)
Goto WE20.
Partner type LS.
Create two partner profile(one for XI the other for R3).
Give the outbound or inbound message type based on the direction..
hope this helps you out :
Regard's
Chetan Ahuja

I am having issues with Time Machine. Error message "The backup disk image could not be created.

Error message "The backup disk image could not be created." I have tried everything I have found online in the community from TM full reset to changing my computers name. Anything else I can try? I am using a Seagate external HD with a connection through my router. I spent an hour on the phone with seagate and everything is ok on the HD end.
TM sees it and it is mounted but cannot go any further. HELP?!!!!
Thanks
-A

How should it be connected? It has a usb port and ethernet. The USB on the ExHD looks like the port on the back of my computer, so I would need one wth the same ends? Do they make those?
I can usually fix most my comp problems myself, but this new ExHD has stumped me.
Thanks for your help.
-A

Index could not be created

Hi All.
I have instaled TREX and then declared the name server and port in visual admin and restarted portal
But still getting the error
Index could not be created; creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Any suggestions or procedure to integrate portal with TREX ?
Thanking You,
Rukmini

Hi,
if this is your exact error message:
creating index failed: Invalid entry in configuration: section nameserver, key address, value tcpip://<trexhost>:<30201> is invalid (Errorcode 7213)
Than you have not changes the value <trexhost> do your real trex name server host name.
And that's why all the lights in TREX monitoring from your application point of view must be red.
Best regards
Frank

Trex Index could not be created HTTP server error: 503 (Errorcode 7266)

Hi Friends,
I have installed EP6.0 SP15 on one machine and Trex 6.1 on another machine.All the services are green in the Trex monitor.And also i am able to get a reply from http://host:30205/TrexHttpServer/TREXISAPIExt.dll?CMD=PING.Connection sucessful.While creating my first index in Index Administration i get this error message.
"Index could not be created; creating index failed: HTTP server error: 503 (Errorcode 7266)."
Please tell me as to what steps i am missing and also where can i see the log message in portal.
Thanks
Sidharath

hi friends,
I went through the settings of trex services on server and found out that even after installing IIS 6.0 it was showing the path of Apache that that is i think the reason that httpserver is green but it is not using the CPU resources.I will share the setting with you.
[queueserver]
executable=TREXQueueServer.exe
arguments=-port 30204
startdir=C:\usr\sap\trex_02
starttime=5000
instances=1
#hp_32:environment=_M_ARENA_OPTS=1:256,_M_SBA_OPTS=512:100:16
As the executable for queserver is there so it is using cpu resources.
[apache]
executable=httpd
arguments=-d C:\usr\sap\trex_02/Apache -R C:\usr\sap\trex_02/Apache/libexec -F
startdir=C:\usr\sap\trex_02/Apache/bin
instances=1
As there is no folder for apache in trex installation so i think it is not working.Please check the setting in Trex Administration->Configration->Choose name server and on the right botton of it is edit services.Double click it and you will see the settings as i have shown above.Please share the settings with me as i will be then able to work with trex.
Do i have to install Apache instead of IIS6.0.Please guide me.
Thanks
Sidharath

HT201269 When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a serve

When I try to setup my new iPad air, I go through all the steps for the iCloud sign-in and choosing security questions and what not. But after I hit the agree to the terms and conditions... It says Apple ID could not be created because of a server error. Have no clue what to do... I've restarted the iPad and get the same message. But my internet works just fine.

1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings

I'm having trouble backing up my second macbook to a new time capsule. continue to get an error message -- "Time Machine Error. The backup disk image could not be created." Is there something I need to change in my time capsule or time machine?

I just set up a new time capsule. it worked fine on my first macbook. But now I cannot backup my second macbook. Getting "Time Machine Error" "The backup disk image could not be created." Do I need to change settings on my time capsule to allow the second computer, or do I need to change something on the computer to allow time machine to work right?

Try #C9 in Pondini's Time Machine Troublshooting
http://pondini.org/TM/Troubleshooting.html

PO could not be creating using the Enjoy-BAPI

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Hi expersts.
I have a problem with BAPI function module BAPI_PO_CREATE1. When program will generate orders for several suppliers for one supplier "PO could not be creating using the Enjoy-BAPI" and "Purchase order item 00010 still contains faulty schedule lines" and
"Source not included in list despite source list requirement" messages occur. Order won't be generated.
When I am generating order only for that supplier, everything is fine. They are generated and no messages are displayed.
Could anyone help me ?
Thanks, regards.
Dan.

Training & Event Management Course type ** could not be created Message no. LSO033

Dear Gurus;
I'm trying to record a Business Event Group through S_AHR_61011889 - Business Event Group , then a Business Event Type through S_AHR_61011888 - Business Event Type.
Actually when I'm recording the data of the Business Event Type then I save i get a message stating
Course type **** could not be created
Message no. LSO033
to be able to save the event type I have just to record its name and the capacity then after saving I have to select change "F6" and record each data infotype separately, something which is not logical for the users.
Even when they make change and record the remaining Infotypes like the description then they select display what they've recorded doesn't come
Does anyone know how can I fix this?
Thanks in advance.
Best Regards;
Lobna

Dear,
Looks like has issue in authorization access, verify and fix it.
Regards,
TG

Is there a way to fix 'Sent mailbox could not be created?'

I have OS 10.8.5 and am using Mail as the mail program, since November. I have not had this problem before. I have four accounts in mail, iCloud, Gmail, Roadrunner and Earthlink. The main one i use is Gmail. Today i noticed that there was an exclaimation point next to my Gmail Sent mailbox. i opened the mailbox and it showed only one sent message that i sent earlier today. There should have been a few months of mail in the mail box, maybe 30 to 50 messages. i clicked on the exclaimation point and the message said:
The Sent mailbox could not be created on the mail server. The local "Sent Messages (Gmail) mailbox was created instead. Mail has changed your account's Mailbox Behaviors preferences to use the local "Sent Messages (Gmail)" mailbox.
i don't know what this even means. My other account mailboxes have their mail in them, only the Gmail mailnbox is not created (although it does have that one message in it). There wasn't anything different i did that would change any preferences that i know of. I see the Gmail Sent messages mailbox at the bottom of the mailbox list and the missing messages are there, but instead of listing the name of the recipient under a To: column, instead there is a From: column, and my name is all that is listed. There is no To: column. I need to know who the messages were sent to if i need to search for one later. i want the recipient to be idendified in the header, as it is in my other Sent mailboxes.
There is one thing that happened right before this occurred. I got a brand new Time Capsule and replaced my very old Airport Extreme with it. I didn't change anything. i just replaced the old base station with the new one, keeping all settings, network names and passwords the same, i just switched the hardware.
After setting up the Time Capsule, when i checked my email, i found this problem with my Gmail mailbox missing.
I found this problem raised in a few other postss on these discussion forums, but there was little or no discussion on the threads. None of them mentioned a new Time Capsule. i'm hoping someone who reads this can say what might have caused this and where the mail box is, and how to get it back.

Glenn--thanks for the reply. I think i tried your first suggestion---i highlighted the Gmail account Sent mailbox and went to the Mailbox menu, went to 'Use this mailbox for,' but all of the four options were grayed out (Sent, Junk, Trash, Drafts). i tried highlighting (or selecting) other mailboxes in the column on the left, including the ones on the server and the ones 'on this mac.' No matter which one i selected, the options were grayed out. Do you know why they would be grayed out? Am i not understanding what to do, or is there some other reason? i'm in Classic mode, in case that matters as to what's in the left column.
I have not yet tried disabling the Gmail account. i was going to, but when i went to Preferences > Accounts > Gmail, i saw and remembered that i had changed one of the settings not long ago, a week or so--where it says "Use only this server" under Outgoing Mail Server (SMTP) i had unchecked 'use only this server,' since none of the other accounts had that checked. So i rechecked it and am wondering if that would protect against what happened.
I feel nervous about disabling the account and removing it from Mail and wanted to ask you, will everything come back when i re-enable it?
Thanks

COREid Federation Error: A local user session could not be created for the

Hi,
I installed two instances of COREid Federation in my machine. Also installed SiteMinder and LDAP. Source Domain of COREid (8101) uses LDAP as IdMBridge and Destination Domain (9101) uses SiteMinder as IdMBridge. I am trying to access the resource protected by the SiteMinder from the source domain using the URL which is constructed using the pattern given in the PDF:
http://mymachine.domain.com:8101/shareid/saml/ObSAMLTransferService?DOMAIN=DestinationDomain&method=POST&TARGET=http://mymachine.domain.com:8887/Source/Source.html
Assertions are generated and I can see the assertion in the Source domain and transferred to the Destination Domain.
I get the following error in the Destination Domain Shareid Log file:
ERROR - [http10113-Processor3] - RECEIVER: ERROR: A local user session could not be created for the assertion
Please help me to solve this issue?
Note: The Web agent runs on the web server instance 8887.
SiteMinder is able to protect the resource when accessed.

Typically that error occurs when the destinations access management system can't find the user based on the SAML attribute. Check to make sure that the attribute that you are matching on matches exactly.

RFC destination BW could not be created in the source system R3073

I'm creating a source system for our BW (version 7.0) dev client.I'm linking it to our R/3 4.7 QA client. From RSA1 I select create source system, I enter the system information and in the next screen I'm prompted to log on as system administrator. I'm in QA now and the system automatically crated the RFC connection. I test the connection and it runs ok. I log on to the BW client from QA and it logs on just fine. When I exit the screen I get the following message:
RFC destination BW could not be created in the source system message number R3073
Why is this happening? The connection tests just fine.
I'm using RFCREMOTE user in BW and ALEREMOTE in QA with the same password
Any ideas?
thanks

Hi,
I cannot tell you surely the settings for SCC4 now (I can't connect to my sys).
Nevertheless, create your R3QA RFCDEST manually in your BWDEV with SM59.
Create your BWDEV RFCDEST manually in your BWQA .
Perform test and authorization test within SM59 from both sys.
When creating the source system in BW the system will detect the RFC and ask you if you want to use it; accept an proceed the the rest of the procedure.
hope this helps...
Olivier.

SHAREid - A local user session could not be created for the assertion

Problem: We have a client trying to federate to our environment using POST profile but we are getting the following error, "RECEIVER: ERROR: A local user session could not be created for the assertion".
I verified that the user exist in the directory and I am able to execute a test successfully as that user.
Thanks.

There is a requirement that the client needs to send an attribute called "traveler" in the assertion. We found out that the problem occurs only when client sends a attribute in the assertion. When the assertion does not include the attribute, there is no issue. Not sure why that is the case as we have other clients sending the same attribute in the assertion.
Here is the AttributeStatement.
<saml:AttributeStatement xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"><saml:Subject><saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified">XXXXXX</saml:NameIdentifier></saml:Subject><saml:Attribute AttributeName="XXXID" AttributeNamespace="http://schemas.xmlsoap.org/claims"><saml:AttributeValue>XXXXX</saml:AttributeValue></saml:Attribute></saml:AttributeStatement>
It does not have <saml:SubjectConfirmation> and <ConfirmationMethod> element. Can that be a problem?
Thanks,
Vinay
Edited by: user504421 on Jul 9, 2009 2:17 PM

ORA-20100: AppDomain could not be created for the specified security level

We recently updated our development environment to Visual Studio 2010. We have previously deployed (with success) .Net stored procedures from Visual Studio 2005 to our Oracle 10gR2 database. I am currently trying to configure a local instance (called local) of Oracle 10gR2 database to test deployment of .Net stored procedures to Oracle 10gR2 via Visual studio 2010 and ODT version 11.2.0.1.2. I have built the demo from the ode developer guide and gotten as far as deploying it but executing the stored procedures from VS 2010 or SQL*Plus produces the following error...
ORA-20100: AppDomain could not be created for the specified security level
ORA-06512: at "SYS.DBMS_CLR", line 152
ORA-06512: at "SCOTT.GETDEPTNO", line 7
Here is what I have done.
(Server)
1. Installed oracle 10gR2 with ODE.Net
2. Installed Oracle 10gR2 patch set 22
3. Installed ODE upgrade from Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21
(Client)
4. Installed Oracle Developer Tools for Visual Studio .NET with Oracle 10g Release 2 ODAC 10.2.0.2.21 (In new client home).
5. Installed patch set 22 on 10g client home.
6. Installed Oracle 11g Release 2 ODAC 11.2.0.1.2 with Oracle Developer Tools for Visual Studio(in new 11g client home, only for VS 2010)
I have made some minor changes (GAC) etc. per the following threads...
ODE.NET 11.1.0.7.20 on 10g Database?!
Re: Error: System.TypeInitializationException
The database appears to be fully functional via TOAD - SQL plus etc. I can't find much on this error but it appears Oracle needs some permissions to launch an ASP.Net application that it does not have. Any help would be GREATLY appreciated, don't hesitate to ask for additional details.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

Port could not be created

Similar Messages

Maybe you are looking for