Port creation?

iam sending a data from 4.6c to 4.7,is it required to create two ports ?
orone port is reqiured ?plzzzzzzzz tell me ?

Hi,
Are you maintaining both systems (4.6C and 4.7) and planning to use IDoc port for both inbound and outbound interface?
If you are then you need to create two IDoc ports (WE21) and attach them to the partner profile (WE20) for the corresponding message types.
If you only maintain the sender system (4.6) then you only need to create one IDoc port.
Regards,
Ferry Lianto

Similar Messages

Cannot find the maps stored in import manager during port creation

Hi All,
I am unable to find any maps that i saved in import manager during port creation ,the maps are not showing in dropdown list during port creation in console.Do i need to store the maps that i have in import manager in specific place under mdm server,so that i can see them during port creation.
All i need to do is assign my import map during inbound port creation,but i cannot find any maps in console.
Could I know whether i am storing my maps some where other than default location.
Thanks
Aravind

Hi Aravind,
First of all check the remote system assigned to ur Port. After that go to import manager. When u logon to the import manager, u get a window "Connect to source". Mention the same remote system over there.Select the file type.Browse the file and map the fields,values,field matching and save the map. then unload the repo and assign the map to the port.
Second way is, u create the port first and give any particular remote system to it. Put the file (u want to use for mapping) in the ready folder of that port and in connect to source window select the type as port, remote system(ame as used port port) and port.then map and save. unload the repo and assign the map to port. Ready folder will be in ur server at location: C drive or D drive->SAP MDM 5.5 ->server->distributions->repo name->inbound->port code->ready. For this option, Ur port type should be manual. After assigning the map u can change it to automatic or keep it manual as per ur requirement.
Hope this solves ur problem.
Regards,
Dheeraj.
Edited by: Dheeraj Kumar on May 6, 2008 9:16 AM

WSDL version used for port creation in SOAMANAGER for Netweaver 7.01 SP-5.

Hi,
Does SOAMANAGER refer to a particular version of WSDL while creating the logical ports for consumer proxies. I'm asking this because after one of the upgrades in our ECC system we find that the authentication configurations of the port are automatically done based on the WSDL now, however this was not the case earlier.
Also logical ports created manually are giving runtime exception (Soap FAult Code : 1). Does logical ports creation necessarily have to be done from WSDL.
Please throw some light on the above, if any of you have faced this issue already.
Regards,
Avishek.

We got a reply from SAP that from NetWeaver 7.0 SP3, logical ports will be created based on Security policy mentioned in WSDL. We can however override this by creating the port manually and the SOAP fault code error can be resolved by manually entering the SOAP Action for each method of the Service in the 'Operation Specific' tab of the Logical Port details.

Error in Logical Port Creation

Hi,
When I try to create a logical port in my consumer system I am getting error
"Error: HTTP: Error in interface for management of HTTP destinations; "
Any ideas on how to fix this?

Sorry - I should have been more clear earlier.
I am using SOAMANAGER to create the logical port. The error occurs when I choose 'WSDL Access Settings' to obtain the WSDL. I was able to get around the problem by going into SOAMANAGER on my provider system, locating the service & binding I want, and then downloading that file. This is a workaround as I would like to get the file via HTTP access.
I suspect this has to do with configuration but I do not know where this needs to be setup.

Connection to ByDesign with a ODP Source system: Logical port creation on CO_RSDSPX_ODP_IN

Hello,
I am trying to connect my ByDesign Could server to the our BW Server by an ODP Source system.
I tried applying what SAP recommend:
http://help.sap.com/saphelp_nw73/helpdata/en/46/b9297716c94e509fcbe62d3c795e85/content.htm?frameset=/en/c6/afacb707764885a6fb62f511c24f34/frameset.htm
http://help.sap.com/saphelp_nw73/helpdata/en/ca/14c0899cb04f16929b5d88e147fc8f/content.htm
http://help.sap.com/saphelp_nw73/helpdata/en/9e/c7a3591dc74a679bbc9716354e42af/frameset.htm
When trying to create a Logical Port on CO_RSDSPX_ODP_IN from SOA Manager with a WSDL Based configuration (downloaded from a Webservice of our ByD), this error is thrown:
SRT Framework exception: The WSDL document is not compatible with proxy class "CO_RSDSPX_ODP_IN": "Unsupported Operation(s):GetList, CloseSubscription, CloseSubscription, CloseSubscription, CloseSubscription, CloseSubscripti
Do you have any idea ?
Also, i was unable to use any Consumer Service directly ... I am not a Basis and don't understand what configuration needs to be done.
Thank you very much.

Hi,
Did you create consumer proxy for the service you like to consume ?
It looks like your WSDL and Consumer proxy are not the same ?
Or you could create Logical Port Manually, but it will fail on provider side because the message you are sending and the provider of the service are not the same.
Manual Configuration
The system uses a user-specified binding URL to create a logical port. You need to specify a unique name for the logical port.
Thank You
Regards
Gov

Is logical port creation mandatory

Hi,
i am creting a service consumer in ABAP ..but it is giving me error :
no receiver could be determined....is it because i have not specified logical port while createing the object...
is it mandatory to create a logical port ?
Also when i create a logical port in soamanager i am getting the following error.
Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.

hi gourav,
thanks for a very helpful.. answer..
but i am still getting the error Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
while creating the logical port....i am using endpoint URL from the wsdl ...i also tried seleting the wsdl file while cerating port..
Also when i tried creting port for another consumer proxy it is working....so this is not a system issue
what could be the problem

Logical port creation error through SOAMANAGER

Hi,
When I try to create a logical port through SOAMANAGER I got the following error.
Error: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL
When I actually look into the class CL_SRT_WSP_CONFIG_SIDL I could'nt find the method CREATE_CLNT_CFG_FROM_WSDL_D in SAP 720 version.
I had seen some discussions in the forum on this error but I could'nt find a proper solution.
Can someone explain me on how to resolve this issue.
Do I need to apply a oss note ? Is it mandatory. Also in one thread they talked of SICF transaction usage which is also not clear. Is there any other way.
Thanks,
Shashi

Sorry - I should have been more clear earlier.
I am using SOAMANAGER to create the logical port. The error occurs when I choose 'WSDL Access Settings' to obtain the WSDL. I was able to get around the problem by going into SOAMANAGER on my provider system, locating the service & binding I want, and then downloading that file. This is a workaround as I would like to get the file via HTTP access.
I suspect this has to do with configuration but I do not know where this needs to be setup.

SAP MDM Port Creation not Possible

Hi,
I am not able to create MDM Inbound Port for my Repository.
The problem is I am not getting the XML Format is coming as Deactivated.
Regards
Kaushik Banerjee

Hi Kaushik ,
To import a XML source file in to MDM from a Remote sytem using the port:
- Create an XML schema which will define the structure of the incoming XML file .and upload this xml schema under the XML schema table in mdm console under teh Admin node
- After this create the port in MDM with type as inbound.
- Select the the XML Format for importing in the format property and the XML schema which you have uploaded in console.
- Make the processing type as Manual if you are going for manual importing or else change it to automatic and configure the MDIs.ini file accordingly.
Refer the use of XML schema table in Console in the below link:
http://help.sap.com/saphelp_mdm550/helpdata/en/8e/9f9c427055c66ae10000000a155106/frameset.htm
If you are importing a standard XML file from the ERP system you will have to acc use the std XML like Matmas05 for a Material record frm R/3 or ECC else if you are importing a test data which corresponds to the MDM repository structure you can generate the XSD using Xomlite software and the exported schema from MDM rep(rep->rt clik->export schema)
Hope It Helped,
Thanks & Regards
Simona Pinto

Dynamical logical port creation

Hi
Is it possible to generate a logical port dynamically at runtime. I only need a logical port once for executing a web service, so I'm looking for a way to minimize administration work.
Regards, Mathias

hi gourav,
thanks for a very helpful.. answer..
but i am still getting the error Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL'.
while creating the logical port....i am using endpoint URL from the wsdl ...i also tried seleting the wsdl file while cerating port..
Also when i tried creting port for another consumer proxy it is working....so this is not a system issue
what could be the problem

Regarding lsmw file port creation

Hi Experts,
By using lsmw (bapi technic),while executing ,
the step of start idoc generation its showing that 'no partner exists with the name type'.and how to create lsmw file port.
Please resolve this issue ASAP.
Regards,
Reddy.

Hi venugopal ketu ,
please go thru the below useful links....
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://www.****************/Tutorials/LSMW/LSMWMainPage.htm
http://www.****************/Tutorials/LSMW/IDocMethod/IDocMethod1.htm
http://www.****************/Tutorials/LSMW/BAPIinLSMW/BL1.htm
http://www.****************/Tutorials/LSMW/LSMWMainPage.htm
All the very best....
Regards,
Sreenivasa sarma K.
Edited by: sharmashree kashi on Mar 28, 2008 5:04 PM

LSMW: File port creation

Hi all!
I am trying to create LSMW. Now i have assigned BAPI object. It is asking me to maintain IDOC parameters. In which one is File port.
If i click on Maintain. Then it takes me to other screen.
May i know how to create file port.
Thanks in advance,

Hi,
You can create the file port using WE21, for more details refer,
Lsmw
LSMW
Regards,
Hema.
Reward points if it is useful.

Difference in port creation in idx1 and we21

i m in my ABAP stack of XI..
what is the difference in creating port in idx1 and we21

Hey
follow the below steps for IDOC to FIle
Configuration to be done on R/3 server
RFC destination(SM59):Pointing towards the XI server
Port(WE21):Use the RFC destination created above
Logical system(BD54):Logical system name for the XI server,it's advised to be of the form sid"CLNT"client(if ur sid is XD1,and client is 110,the it should be XD1CLNT110)
Partner Profile(WE20):use the same name as that of the Logical system name created above i.e. XD1CLNT110.
Configuration to be done on XI server.
Nothin need to be done here,jst make sure ur IDX2 (IDOC metadata) is correct.
SLD
Two business system's have to be created.
first Business system will use the Logical system name of the R/3 server and will be used as a sender service.configured of type Webaas ABAP
second business syatem will use the Logical system name u created in BD54 and will be used as a receiver service.Configured of type Third party.
Note:Most of the time RFC destination and ports are already created in both R/3 server and XI server,so u can use the existing ones rather than creatin ur own.
thanx
ahmad

IDOC- PORT CREATION

Hi all,
1. How to create the port.
2.wats the need of creating port.
3.port has to created for outbound or indound .
please give me the relevent answer.

Hi surprith,
check this..
Port Definition
The port definition defines the medium in which data is exchanged between the two systems in the ALE process, IDocs are transferred via memory. Six port types are available.
     Transactional RFC (tRFC) ports used for ALE communication.
     File ports used by EDI
     CPI-C ports used to communicate with R/2 systems
     Internet ports used to connect with Internet applications
     ABAP-PI ports used to process data via the ABAP programming interface
     XML ports used to process files in XML format.
Port Settings
Implementation Guide for R/3 Customizing (IMG) - Basis Components - Application Link Enabling (ALE) - Sending and Receiving Systems - Systems in Network - Asynchronous Processing
- Define Number Range for Ports
- Define Port
Transaction:   Port Definition     WE21
Port Definition
The port defines the technical characteristics of the connection between SAP and the Subsystem. It also defines the medium in which data is exchanged between the two systems. In the EDI process, IDocs are transferred to external systems via ports. The EDI processes use the file port. The type of port also depends on the receiving side. If the receiver cannot accept data in the medium used by a port, the port cannot be used. For example, the tRFC port cannot be used for EDI unless the receiving subsystem has support for tRFC.
Types of Ports
Port     Function
Transactional RFC     Used for ALE Communication
File     Used by EDI
CPI-C     Used to communicate with R/2 system
Internet     Used to connect with Internet Application
ABAP-PI     Used for Custom IDoc processing via ABAP Programming Interface
XML     Used for processing files in IDoc/XML format
A port is a client-independent object. The parameters specified for port definitions are
     Port: The port name is any meaningful name that uniquely identifies the port.
     Description: This is for documentation purpose only.
     Version: The internal structure of the IDoc has changed in every major release.
     Message Edited by
shibu kurian

RFC Port Creation Problem

HI Experts,
I have trying to Created RFC Port for ECC to IDOC as TYPE: 3 i have given the all fields and Tested the Connection i got this error:
Connection Error
Error when opening an RFC connection
ERROR: partner 'eccdcs1s:sapgw01' not reached
LOCATION: SAP-Gateway on host gcecc6 / sapgw00
DETAIL: NiPConnect2
CALL: connect
COMPONENT: NI (network interface)
COUNTER: 246
ERROR NUMBER: 10060
ERROR TEXT: WSAETIMEDOUT: Connection timed out
MODULE: nixxi.cpp
LINE: 2764
RETURN CODE: -10
SUBRC: 0
RELEASE: 700
TIME: Fri Jun 25 19:16:36 2010
VERSION: 38
can u please help me out to resolve this problem.
Regards,
-Prabhakar.A

Hello,
I have given the IP address and tested it is given the following error.
Connection Error
Error when opening an RFC connection
ERROR: timeout during allocate
LOCATION: SAP-Gateway on host gcecc6 / sapgw00
DETAIL: no connect of TP sapdp01 from host eccdcs1s after 20 sec
COMPONENT: SAP-Gateway
COUNTER: 322
MODULE: gwr3cpic.c
LINE: 1872
RETURN CODE: 242
SUBRC: 0
RELEASE: 700
TIME: Fri Jun 25 19:56:47 2010
VERSION: 2
Regard's
-Prabhakar.A

Port creation error

hi..
while creating parner profile i am getting this error
<b>
port could not be created
RFc destination MLS_100 not specified for system mls_100
enter the rfc destination and restart the genartaion</b>
Please hel pme to solve this error..
regards
kumar

hi
Check out whether you assigned logical systems to your clients.Next check the ports(for inbound and outbound) also in we20..
Go through these documents for the settings that need to be done.
http://www.sappro.com/downloads/OneClientDistribution.pdf
http://www.sapgenie.com/sapgenie/docs/ale_scenario_development_procedure.

Port creation?

Similar Messages

Maybe you are looking for