Port does not exist

Hi
I was trying to trigger an Idoc from QAS. This Idoc has not been triggered before. I went to BD10 but then I couldn't as I don't have authorization. I went to WE19, I click on Standard Outbound Processing, I get an error that Port doesn not exist in the table of port descriptions.
I already created Port pointing to XI using WE21 and I have also created a Partner Profile using We20. Why do I get the error ?
I also don't see any data in the Idoc when I go to We19
Midhun

Hi,
Probably you would like to see this blog for the required steps for pushing the Idocs from SAP to XI-
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Regards,
Francis

Similar Messages

"Port 'A000000001' of type ALE does not exist"

Hi Guys,
I am getting the following error message when I am trying to activate the Source System in RSA1. This connection is self connection to BW system.
"Port 'A000000001' of type ALE does not exist"
When I go and try to create the port in WE21 for the port "A000000001". I am getting the following error message.
Choose another name! Name Range reserved.
As far as I know that the source system is pointing to 'A000000001" port which I could not find in WE21. So how do i point this particular port to this system. Is there any way where I can go ahead and change the table entries.
Waiting for your suggestions.
Regards
Pooja

Thanks for update.
I am the one responsible for al.
I went to we21 under TRFC type a port XXXXXXXXX9 alreday exists pointing to the logical client rfc.
I tried to create a new port entry with A0000000001 but no sucess.
I tried to edit the 1st entry but the port filed comes disabled.
Please assist in this regard.
Thanks
Pooja

SRM MDM, Error, "Table with Code 'null' does not exist in repository"

Hi experts,
We has SRM MDM scenario, while doing OCI settings, we are able to connect with MDM repository but getting follwoing error message in portal, "java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Can You please suggest,
Thanks and Regards,
Munish

Hi everyone,
Sudhanshu and Anshuk:- Thanks for your response, let me try and explain the real scenario in details:-
We have deployed the SRM-MDM Catalog Search UI in Portal.
We tried accessing the http://<Portal Host>:<Portal Port>/SRM-MDM/SRM_MDM
Then we got a screen (Search UI App screen), where in we have provided the MDM Server name, then the MDM Server Password, then presses the Connect button, then below this, it displayed the Repository name created in the MDM. We have selected the Repository, then provided the Credentials of a User (Name: T_CORP) in MDM which has "Catalog Manager", and the "UI Configuration Manager" Roles. Please note that these Role names were created by us in MDM. Is it the right procedure or do we have any standard Roles delivered by SAP in MDM to map? If any standard Roles are available, where we need to check these.
Once the Credentials of MDM User is provided, and then selected the "Login" button.
Then we are getting the below error.
"java.lang.IllegalArgumentException: Table with Code 'null' does not exist in the repository 'Repository' or is one of the system table (e.g. Workflows) that is not exposed in repository schema"
Please clarify; we are not configuring any values in iViews. Where we need to do this, I mean name of the iView, and what values do we need provide generally? We are just running the Search UI App application; I don't think it is an iView, because the URL shows the Application name details, etc...
Please guide us, how to fix this Error.
Thanks and Regards,
Munish

Destination does not exist (help please)

Background:
- Using Flex Builder 3 plugin for Eclipse
- Downloaded latest BlazeDS release build
- Running Tomcat 6.0.16
=======
First I want to note the samples that come with BlazeDS run
absolutely fine.
So I created a new project in Flex Builder 3. I'm just trying
to get something simple working at first so my one mxml file is as
follows (I stripped out everything except the code in question):
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
layout="absolute">
<mx:RemoteObject id="ro"
destination="enrollmentService"/>
<mx:DataGrid
dataProvider="{ro.getEnrollmentList.lastResult}" width="100%"
height="100%"/>
<mx:Button label="Get Data"
click="ro.getEnrollmentList()"/>
</mx:Application>
=====
I created and EnrollmentService class and I'm sure it's
getting compiled to WEB-INF/class...I see .class file there.
I added the flex folder to the WEB-INF folder. My
remoting-config.xml is as follows (because of problems I specified
a default and repeated it to be sure):
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
class="flex.messaging.services.RemotingService">
<adapters>
<adapter-definition id="java-object"
class="flex.messaging.services.remoting.adapters.JavaAdapter"
default="true"/>
</adapters>
<default-channels>
<channel ref="my-amf"/>
</default-channels>
<destination id="enrollmentService">
<properties>
<source>test.service.EnrollmentService</source>
</properties>
<channels>
<channel ref="my-amf"/>
</channels>
</destination>
</service>
My services-config has the following channel defined:
<channel-definition id="my-amf"
class="mx.messaging.channels.AMFChannel">
<endpoint url="
http://{server.name}:{server.port}/{context.root}/messagebroker/amf"
class="flex.messaging.endpoints.AMFEndpoint"/>
<properties>
<polling-enabled>false</polling-enabled>
</properties>
</channel-definition>
My web.xml is a follows:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD
Web Application 2.3//EN" "
http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app>
<display-name>RemoteTest</display-name>
<context-param>
<param-name>flex.class.path</param-name>
<param-value>/WEB-INF/flex/hotfixes</param-value>
</context-param>

<listener>
<listener-class>flex.messaging.HttpFlexSession</listener-class>
</listener>

<servlet>
<servlet-name>MessageBrokerServlet</servlet-name>
<display-name>MessageBrokerServlet</display-name>
<servlet-class>flex.messaging.MessageBrokerServlet</servlet-class>
<init-param>
<param-name>services.configuration.file</param-name>
<param-value>/WEB-INF/flex/services-config.xml</param-value>
</init-param>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>MessageBrokerServlet</servlet-name>
<url-pattern>/messagebroker/*</url-pattern>
</servlet-mapping>
<welcome-file-list>
<welcome-file>index.html</welcome-file>
<welcome-file>index.htm</welcome-file>
</welcome-file-list>
</web-app>
====
So I start Tomcat from Eclipse and run the app by clicking
the Run button in Eclipse. The app comes up fine, but when I press
the "Get Data" button. I get the error message below. For the life
of me I don't understand why. I clearly have a default channel AND
I have specified a channel. This is so frustrating...any help would
be greatly appreciate.
====
[RPC Fault faultString="[MessagingError message='Destination
'enrollmentService' either does not exist or the destination has no
channels defined (and the application does not define any default
channels.)']" faultCode="InvokeFailed" faultDetail="Couldn't
establish a connection to 'enrollmentService'"]
at mx.rpc::AbstractInvoker/
http://www.adobe.com/2006/flex/mx/internal::invoke()[E:\dev\3.0.x\frameworks\projects\rpc\ src\mx\rpc\AbstractInvoker.as:257
at mx.rpc.remoting.mxml::Operation/
http://www.adobe.com/2006/flex/mx/internal::invoke()[E:\dev\3.0.x\frameworks\projects\rpc\ src\mx\rpc\remoting\mxml\Operation.as:197
at
mx.rpc.remoting::Operation/send()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\remotin g\Operation.as:113]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at
mx.rpc.remoting.mxml::Operation/send()[E:\dev\3.0.x\frameworks\projects\rpc\src\mx\rpc\re moting\mxml\Operation.as:170]
at Function/
http://adobe.com/AS3/2006/builtin::apply()
at mx.rpc::AbstractService/
http://www.adobe.com/2006/actionscript/flash/proxy::callProperty()[E:\dev\3.0.x\frameworks \projects\rpc\src\mx\rpc\AbstractService.as:285
at
FlexJ2EE_test/___FlexJ2EE_test_Button1_click()[C:\Prj\workspace\RemoteTest\flex_src\Remot eTest.mxml:36]

While creating a Flex project using Flex builder, did you
select the server type for your project? If you did not select a
server type for your flex project, did you configure your compiler
to include your services-config.xml using the -services argument?
In your project's compiler settings, add -services
"configurationfiles/services-config.xml" argument to the compiler
arguments. The path should point to your services-config.xml.
If the above mentioned steps were completed and still your
facing problem, can you please try running "clean" on your project.
Hope this helps.

XIServerEngine does not exist

Hello friends,
Ive configured Alert Framework and I get Alerts via email. Under the mail there are 2 links:
<b>Message Monitor:</b> http://<host>:<port>/rwb_mdt/index.jsp?rwb=true&objectName=name=is.09.cip10,type=XIServerEngine&messageid=2C9535E009E111DC894B00300571D808
<b>Message Monitor (Safe Connection):</b> https://<host>:<port>/rwb_mdt/index.jsp?rwb=true&objectName=name=is.09.cip10,type=XIServerEngine&messageid=2C9535E009E111DC894B00300571D808
If I click on the first link I get this error:
MBean com.sap.XI:name=is.09.cip10,type=XIServerEngine does not exist
Stack trace for the above error message is:
com.sap.aii.rwb.exceptions.WrongMBeanException: MBean com.sap.XI:name=is.09.cip10,type=XIServerEngine does not exist
     at com.sap.aii.rwb.core.XIComponent.getSubComponent(XIComponent.java:313)
     at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedXIComponent(AppMainModel.java:151)
     at com.sap.aii.mdt.web.MonitorDynPage.setNewComponent(MonitorDynPage.java:422)
     at com.sap.aii.mdt.web.MonitorDynPage.doInitialization(MonitorDynPage.java:238)
     at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:105)
     at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
     at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:207)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
And for the second link I get a "page could not be displayed" error
How comes that XI makes these 2 links standard?
Do anyone has eny suggestion what to do and where to look for these errors?
Kind regards,
Kamran

Hi Kamran,
the problem might be that in the Exchange Profile
the property 'com.sap.aii.connect.integrationserver.name' contains the
host name "HOSTNAME" (i.e. capital letters) whereas the Integration
Server registers with the SLD under "hostname" (lower case). The URL to the message
monitor is currently build from the Exchange Profile entry instead of
the SLD entry. This is usually not a problem since in general the host
names are given in small letters.
As a workaround, you can replace the Exchange Profile parameter
'com.sap.aii.connect.integrationserver.name' with "hostname" (lower case) and check if
that helps.
Regards,
Jaime

ORA-01031: insufficient privileges and shared memory realm does not exist

Hi all,
I came to a dead end to start oracle 10.2 database. I have searched on google and this forum, none of these solutions work for me. PS, I have installed 11g on my machine too.
I have set up ORACLE_SID,ORACLE_HOME to 10.2 database based on the tnsnames.ora.
follow is error message：
sqlplus sys as sysdba
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 3 02:09:54 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter password:
ERROR:
ORA-01031: insufficient privileges
sqlplus /nolog
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Apr 3 02:10:55 2013
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> conn / as sysdba
ERROR:
ORA-01031: insufficient privileges
SQL> conn scott/tiger
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
First I thought the instance has been start yet, but since I can't login with sysdba. I don't know what other options.
For 10.2, the tnsnames.ora
ORA102 =
+(DESCRIPTION =+
+(ADDRESS = (PROTOCOL = TCP)(HOST =XXX)(PORT = 1523))+
+(CONNECT_DATA =+
+(SERVER = DEDICATED)+
+(SERVICE_NAME = ora102)+
+)+
+)+
LISTENER_ORA102 =
+(ADDRESS = (PROTOCOL = TCP)(HOST =XXX)(PORT = 1523))+
EXTPROC_CONNECTION_DATA =
+(DESCRIPTION =+
+(ADDRESS_LIST =+
+(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))+
+)+
+(CONNECT_DATA =+
+(SID = PLSExtProc)+
+(PRESENTATION = RO)+
+)+
+)+
listener.ora:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /data/oracle/ora102)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
(ADDRESS = (PROTOCOL = TCP)(HOST =XXXXX)(PORT = 1523))
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)

try do this steps on server side:
1) sqlplus sys as sysdba
2) select open_mode from v$database;
show result 2 step

Mysql.sock does not exist!

I'm trying to set up mysql. So I went and installed phpmyadmin and it set up without any errors. But when I go to log into it, it gives me error #2002 Cannot log into mysql server. I read that this was because it couldn't access mysql.sock, and sure enough it was looking for the file in /var/mysql/mysql.sock
Unfortunatly for me, the directory /var/mysql does not exist. I thought I would try to install a later version from mysql.com, but it told me to stop all other instances of mysql with this command. I ran that command, and it said "Cannot connect to local MySQL server through socket '/var/mysql/mysql.sock'" !!!!!
I could go ahead and try to install a new version of MySQL, but it said it would install the sock file in this other folder. (/tmp/mysql.sock) If I do that, I would have to change a bunch of config files to point to this new location, and I don't really know what things need that and what things don't. (I'm kindof new to server management)
So my question is: Why is mysql.sock not in /var/mysql/ and how do I get it there? I ran locate "mysql.sock" and it returned no results.
I'm using the stock versions of everything on Mac os X server 10.6.5

How a server is secured depends on the local configuration and requirements.
Blocking access to this particular tool might involve putting the tool on a separate Site on a different IP port and not passing that port through the firewall, or blocking access to the tool via rewrite rules, or setting up an http-level password.
[Here is one thread on this topic|http://stackoverflow.com/questions/2631269/how-to-secure-phpmyadmin], or [here|http://www.phpbuilder.com/board/showthread.php?t=7109220], and particularly see the last part of the [phpMyAdmin Official Quick Install documentation|http://www.phpmyadmin.net/documentation>.
There are some specific recommendations in the phpMyAdmin tool, including +You should deny access to the ./libraries and ./setup/lib subfolders in your webserver configuration. For Apache you can use supplied .htaccess file in that folder, for other webservers, you should configure this yourself. Such configuration prevents from possible path exposure and cross side scripting vulnerabilities that might happen to be found in that code.+
I've seen all manner of access attempts and injection attacks attempted against that tool, too; there was a barrage of attempts earlier today on one of my servers.
And FWIW, I tend to use the command line tools, or the Sequel Pro tool.

Error: Selected disk does not exist (21) Module-SRE-700

Already tried everything that the recovery cisco commands, anyone have idea how to solve the problem of the print shown in print?
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
ServicesEngine boot-loader> install_key waas-accelerator-4.4.5c.4-k9.bin
Keyfile Size 202814577 over limit 32768 will not burn into flash
ServicesEngine boot-loader> verify
Loading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
Unrecognized command
ServicesEngine boot-loader>
#service-module sm 1/0 session
Trying 172.20.245.1, 2067 ... Open
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Trying to reset Service Module SM1/0.
May 7 11:27:33.055: %SRE_SM-6-STATE_CHANGE: SM1/0 changing state from SERVICE_MODULE_STATE_ERRQ to SERVICE_MODULE_STATE_SHDN
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:29:03.331: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
þ
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...
Now booting from primary boot loader....
Authenticating boot loader....
Primary Boot Loader Authenticated - booting....
Please enter '***' to change boot configuration:
Detect and Initialize network device
Backup current platform configurations....
SRE step 1 - SM registration...
Finding (hd1,3)/296e03bc-3236-4a68-a178-688e56400a1e, failed
Local install not supported
Response - no installation needed (len: 422)
SRE Installation Not Needed
Restoring orignial configuration...
Updating flash with bootloader configuration.
Please wait ................... done.
May 7 11:30:31.339: %SM_INSTALL-6-INST_RBIP: SM1/0 received msg: RBIP Registration RequestLoading disk:/bzImage ... Unable to load image
Error: Selected disk does not exist (21)
Unable to boot image
ú
Initializing memory #1. Please wait...
Initializing memory #2. Please wait...
This may take a minute....
Serial ATA Port 0 : Hitachi HTE545050B9A300
DDR Memory 4096 MB detected
Intel(R) Core(TM)2 Solo CPU    L3400 @ 1.86GHz
BIOS SM 3.52.8, BIOS Build date: 02/08/2011
System now booting...
Please wait...
Please press P to select Primary Boot Loader ...
          or S to select Secondary Boot Loader ...
          or wait to boot from default configuration ...

Hi,
Opened a tac and managed to get the resolution of the problem. For those with the same problem reported by me above just follow the procedure below:
1. uninstall existing SRE-V software
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1055364
2. run sm-hw-util to set sata mode to IDE
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438
3. configure a static, 32bit route to point the service module IP address to the SM slot/0 interface
ip route 255.255.255.255 SM slot/0
4. install WAAS:
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/v421/module/installation/guide/wssmcfg.html#wp47040
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/sre_v/1.5/user/guide/software.html#wp1091438

Error: File does not exist (while trying to get Petstore and demos to run)

Hi all,
I have been trying in vain to get the Petstore demo and other servlet demo HelloWorld to run. It seems to install okay cause it creates the directories and extracts the .ear or .war files. My problem is connecting to the application. When I run http://my.host:7778/estore or http://my.host/7778/HelloWorld/HelloWorld I get and error in the Apache error_log that says: File does not exist: c:/oracle/components/apache/apache/htdocs/helloworld/helloworld and File does not exist: c:/oracle/components/apache/apache/htdocs/estore
I have looked and searched everywhere for help but to no avail. Under the WebModule the URL Binding is /HelloWorld and /estore.
Please help me!!! I am going crazy with this.
Thanks,
Grant
PS. I am running 9iAS 9.0.2.0.1 and everything is on 1 Windows 2000 (sp1) machine. Infrastructure and Components in separate dirs with port 7777 and 7778 for each.

I'm having the same problem under a solaris system did anyone ever find the solution to this problem. For some reason the server just wants to use the document root instead of the deployed application directory.

Error: The preference path does not exist

Subject:
Error: The preference path does not exist:
Oracle.Portal.Page(WWC-51000)]
I can not resolve this error.
Have you already experienced this error?
I'm sending more information below.
Regards, Dime
DETAILS:
========
ORACLE Product: iAS 9i EE, v1.0.2
Platform: RedHat Linox 6.2, kernel 2.2.18
HW Platform:
IBM Intellistation 6889, Intel P2 350MHz, 384MB
Problem:
After successful installation of the Application Server and data base creation, the installation of ORACLE Portal 3.0.6 is successful too, but the following message
appears when we try to access the URL http://servername:port/pls/portal30:
Error: The preference path does not exist:
Oracle.Portal.Page (WWC-51000)
About the Attachments:
- init.ora.original (the original init.ora file)
- init.ora.try1 (the file modified as described in the configuration guide)
- init.ora.try2 (according suggestions in the discussion group on
the ORACLE Metal Partners Site)
- install.log (install.log generated with init.ora.try2)
Regards,
Dimitar Indovski,
GORD Systems
ATTACHMENT-1 (init.ora.original)
db_name=DEFAULT
db_files= 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
ATTACHMENT-2 (init.ora.try1)
db_name=DEFAULT
db_files = 80 # SMALL
db_file_multiblock_read_count = 8 # SMALL
db_block_buffers = 100 # SMALL
shared_pool_size = 3500000 # SMALL
log_checkpoint_interval = 10000
processes = 50 # SMALL
parallel_max_servers = 5 # SMALL
log_buffer = 32768 # SMALL
max_dump_file_size = 10240 # limit trace file size to 5 Meg each
global_names = TRUE
control_files = (ora_control1, ora_control2)
max_enabled_roles = 25
open_cursors = 50
compatible = 8.1.0
java_pool_size = 20
ATTACHMENT-3 (init.ora.try2)
db_name=DEFAULT
db_file_multiblock_read_count = 16
db_block_buffers = 550
shared_pool_size = 31457280
log_checkpoint_interval = 10000
processes = 100
parallel_max_servers = 5
log_buffer = 32768
max_dump_file_size = 10240
global_names = TRUE
control_files = (ora_control1, ora_control2)
open_cursors = 300
large_pool_size = 45000000
java_pool_size = 32768000
db_block_size = 8192
ATTACHMENT-4 (install.log.gz)
-----------------------------

Dennis
A general shared_pool_size Q&A is part of the Troubleshooting Guide on OTN: http://technet.oracle.com/products/iportal/htdocs/portal_troubleshooting.htm
The Configuration Assistant determines the shared pool size from the view v$parameter,
which lists information about the initialization parameters (populated from init.ora file). If the shared_pool_size value is more than 15728640 (for a default installation), you pass the minimal requirements set by the Portal Installer. Make sure you actually write out all the digits (i.e. 1000000000) and don't use abbreviations (1000M). Currently, the Configuration Assistant does a numeric check against the values that are set and cannot resolve the abbreviate syntax.
Also try running the sql [select value from v$parameter where name like 'shared_pool_size';] to check if the changes you are making in the init.ora is really getting populated in the v$parameter view. As long as you restart the database once you make the change in init.ora, it should take effect.
null

Import Error: The root directory does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

Import Error:Root Directory Does not exist

Hi,
I have some isuuses with importing the extended page. When I try to Import it throws an error.
Root Directory does not exist.
I am using the following command.
import c:\jdev\jdevhome\jdev\myprojects\oracle\apps\asn\opportunity\webui\EMCOpptyDetPG.xml -includeSubpackages -validate -rootdir c:\prabhat\Jdev\jdevhome\jdev\myprojects -mmddir C:\prabhat\Jdev\jdevhome\jdev\myhtml\OA_HTML\jrad -userId 1 -username apps -password apps -dbconnection "(description = (address_list = (address = (community = tcp.world)(protocol = tcp)(host =xxxx)(port =xxx)))(connect_data = (sid = xxxx)))" -jdk13
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetP
G":
Importing /oracle/apps/asn/opportunity/webui/EMCOpptyDetPG
Validation warnings in document "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG":
Invalid value "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubt
abPrmRN". Component "/oracle/apps/pv/opportunity/webui/PvOpptyPartnerRN" cannot
be referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabPr
mRN" because it violates scope restrictions.
Invalid value "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" for property "Exte
nds" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTas
kRN". Component "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN" cannot be refere
nced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN" bec
ause it violates scope restrictions.
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTable" of t
able style because it is inside "tableLayout".
The component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNSubtabTaskRN"
cannot contain "/oracle/apps/jtf/cac/task/webui/CacTaskSummRN.CacSmrTaskButtonR
N" of stackLayout style because it is inside "tableLayout".
Invalid value "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" for property
"Extends" on component "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmS
tack". Component "/oracle/apps/pv/opportunity/webui/PvAbandonOpptyRN" cannot be
referenced from "/oracle/apps/asn/opportunity/webui/EMCOpptyDetPG.ASNPrmStack" b
ecause it violates scope restrictions.
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Error: The root directory does not exist
Import completed.
But After this when I try to see from the server there is no file with name EMCOpptyDetPG.xml exist. So I think this file is not imported.
Could suggest how to solve this problem.
Thanks
Prabhat

Hi Tapash
while deploying a page to mds Repository i m getting the same error that root Directory does not exist but it also says that import completed successfully.
when i see the same using jdr_utils.listDocuments('xxxx/oracle/apps/ak/server/webui/xxxPG')
it says printing /xxxx/oracle/apps/ak/server/webui/xxxPG thus page is available in the mds repository and i m able to access the page at run time
my concern is why i m getting this error
my import command looks like this
java oracle.jrad.tools.xml.importer.XMLImporter $JAVA_TOP/xxxx/oracle/apps/ak/server/webui/xxxxPG.xml -jdk13 -mmddir $OA_HTML/jrad -username apps -password apps -rootdir $JAVA_TOP -validate -dbconnection " (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = xyxyxyxyxy)(PORT = xyxyx)) (CONNECT_DATA = (SID =yyy)))"
could u pls suggest some solution.

ORA-27101: shared memory realm does not exist urgent cannot connect

Hi i can't succeed connectivity test with netmgr
Initializing first test to use userid: scott, password: tiger
Attempting to connect using userid: scott
The test did not succeed.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
There may be an error in the fields entered,
or the server may not be ready for a connection.
Here is what i get from tcpdump:
0x00a0: 5241 2d30 3130 3334 3a20 4f52 4143 4c45 RA-01034:.ORACLE
0x00b0: 206e 6f74 2061 7661 696c 6162 6c65 0a4f .not.available.O
0x00c0: 5241 2d32 3731 3031 3a20 7368 6172 6564 RA-27101:.shared
0x00d0: 206d 656d 6f72 7920 7265 616c 6d20 646f .memory.realm.do
0x00e0: 6573 206e 6f74 2065 7869 7374 0a4c 696e es.not.exist.Lin
0x00f0: 7578 2045 7272 6f72 3a20 323a 204e 6f20 ux.Error:.2:.No.
0x0100: 7375 6368 2066 696c 6520 6f72 2064 6972 such.file.or.dir
0x0110: 6563 746f 7279 0a ectory.
Here an attempt with sqlplus that didn't work
sqlplus scott/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:05:03 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Another attempt with sqlplus that succeed i dunno why
oracle@debian:~$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:06:02 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
Can someone help me to understand what is wrong please?

user499283 wrote:
Well I don't understand exactly what you mean
here is the listener status
SNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:24:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=debian)(PORT=1521)))
Services Summary...
Service "CHUCKY" has 1 instance(s).
Instance "CHUCKYSON", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0
LOCAL SERVER
Service "chucky.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "chuckyXDB.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: debian, pid: 11725>
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=49930))
Service "chucky_XPT.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I dont know if it is a good thing i copy an init.ora file to initCHUCKY.ora and now database is using it I have just changed some values in it like control files dbname ... that were pointing to another database maybe this is why i dont manage to get this database runing.
Now i am stucked I dunno what to do
racle@debian:~$ tnsping chucky
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:27:45
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = debian)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = CHUCKY)) (HS = OK))
OK (0 msec)
I am so new to it as i understand the listener is working if i beliave what reports tnsping
As I understand the database is started
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1218316 bytes
Variable Size 62916852 bytes
Database Buffers 100663296 bytes
Redo Buffers 2973696 bytes
Database mounted.
Database opened.
As Inunderstand it is listeneing on 1521
netstat -anp | grep 1521
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 11762/tnslsnr
tcp 0 0 127.0.0.1:46370 127.0.0.1:1521 ESTABLISHED11703/ora_pmon_CHUC
tcp 0 0 127.0.0.1:1521 127.0.0.1:46370 ESTABLISHED11762/tnslsnr
unix 2 [ ] DGRAM 43990 11521/su
I made a tcpdump i saw the data is comong on localhost port 1521
Synthese I think the listener is runing, the database too, it is making a listen on 1521 port , when I try to connect data arrives on the right interface.
But I can't login by
sqlplus scott/tiger@CHUCKY
qlplus SCOTT/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 18:32:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
I dunno what is this fuckin shared memoryThis fuckin shared memory is how oracle does interprocess communication. When you connect to Oracle, you have to connect to this area. If you tell it the wrong area, it won't find it. You can see the areas with the ipcs command on the server. Since you can connect locally, but can't connect remotely, there is something wrong with how you told Oracle to connect remotely. Remotely can be on the same host if you have an @ in the connect string.
>
env | grep ORACLE
ORACLE_SID=CHUCKY
ORACLE_BASE=/home/oracle
ORACLE_HOME=/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/
seems like my variables are good.
Well I dunno what to do I didn't think getting a simple login locally over tcp/ip would be so difficult, I am afraid of what will happen after this will work :) As it should be one of the easiest things on oracle what about the hardest :)Well, first try removing the trailing slash from ORACLE_HOME everywhere, including if you have it in the listener.ora. Then compare the tnsnames.ora ORACLE_HOME with your environment ORACLE_HOME. In fact, if you have a listener.ora, try renaming it to something else and restarting the listener.
That error is normally due to a bad ORACLE_HOME or ORACLE_SID. Since your tnsping works, that indicates the ORACLE_HOME is good. But all that tells you is that the listener responds. Other causes may be inadequate processes in init.ora or case issues with the sid, or just generally not following the installation instructions. But are there installation instructions for debian?
With multiple databases on one host, some kernel parameters may need to be increased.

10g - File does not exist: .../Apache/Apache/htdocs/dsl/apex/apex_admin

We are on 10.2.0.3, and created a separate (dedicated) ORACLE_HOME for the App Exp 3.0.1 installation.
We used the OUI to install the Companion version of Apache (HTTP server 1.3) on our IBM AIX5L machine 9119-595 (64 bit) and we set all appropriate conf files (dads.conf, httpd.conf, don't have a 'marvel' file) to port 3232. Successfully ran the command "EXEC DBMS_XDB.SETHTTPPORT(3232);" in the App Exp repository DB. We restarted Apache (HTTP server).
The Oracle Apache HTTP web page successfully displays at http://bbbbb.oooo.com:3232/ .
When trying to start the App Exp Aministrator at "http://bbbbb.oooo.com:3232/dsl/apex/apex_admin" we get "The page cannot be found" (HTTP 404 - File not found, Internet Explorer).
The Apache error log "/Apache/Apache/logs>view error_log.1205496000" contains the following lines:
[Fri Mar 14 15:21:31 2008] [error] [client 10.30.24.9] [ecid: 1205526091:10.9.8.244:5546130:0:485,0] File does not exist: /seamnt/prd203
/u01/oracle/product/10_2_http_server/Apache/Apache/htdocs/dsl/apex/apex_admin
Here is our dads.conf file contents (password hidden, but does work to login to APEX_PUBLIC_USER via SQL*plus):
# ============================================================================
# mod_plsql DAD Configuration File
Alias /i/ "/u01/oracle/product/10_2_http_server/Apache/Apache/images/"
AddType text/xml xbl
AddType text/x-component htc
<Location /pls/apex>
Order deny,allow
PlsqlDocumentPath docs
AllowOverride None
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlDatabaseConnectString bbbbb.oooo.seagate.com:3232:okdedw1 ServiceNameFormat
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
PlsqlAuthenticationMode Basic
SetHandler pls_handler
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDatabaseUsername APEX_PUBLIC_USER
PlsqlDefaultPage apex
PlsqlDatabasePassword XXXXXXX
Allow from all
</Location>
All the following conf files seem to contain the suggested references to other conf files:
httpd.conf
# Include the Oracle configuration file for custom settings
include "/seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/Apache/conf/oracle_apache.conf"
"plsql.conf" 37 lines, 1722 characters
include /seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/modplsql/conf/dads.conf
include /seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/modplsql/conf/cache.conf
"cache.conf" [Read only] 21 lines, 728 characters
PlsqlCacheDirectory /seamnt/prd203/u01/oracle/product/10_2_http_server/Apache/modplsql/cache
That directory "dsl" does NOT exist under the "htdocs" directory.
Any ideas what's wrong ("File does not exist: .../Apache/Apache/htdocs/dsl/apex/apex_admin) ?
That directory "dsl" does NOT exist under the "htdocs" directory.
okdev9a#:/u01/oracle/product/10_2_http_server/Apache/Apache/htdocs>ls -la
total 754
drwxr-x--- 9 oracle dba 2048 Mar 13 15:04 .
drwxr-x--- 16 oracle dba 1024 Mar 13 15:16 ..
-rw-r----- 1 oracle dba 5927 Jan 22 2005 NFIntro.htm.de
-rw-r----- 1 oracle dba 5864 Apr 26 2005 NFIntro.htm.en
-rw-r----- 1 oracle dba 6049 Jan 22 2005 NFIntro.htm.es
-rw-r----- 1 oracle dba 6049 Jan 22 2005 NFIntro.htm.es_ES
-rw-r----- 1 oracle dba 5962 Jan 22 2005 NFIntro.htm.fr
-rw-r----- 1 oracle dba 5962 Jan 22 2005 NFIntro.htm.fr_CA
-rw-r----- 1 oracle dba 5864 Apr 26 2005 NFIntro.htm.htm
-rw-r----- 1 oracle dba 5989 Jan 22 2005 NFIntro.htm.it
-rw-r----- 1 oracle dba 5782 Jan 22 2005 NFIntro.htm.ja
-rw-r----- 1 oracle dba 5902 Jan 22 2005 NFIntro.htm.ko
-rw-r----- 1 oracle dba 5973 Jan 22 2005 NFIntro.htm.pt_BR
-rw-r----- 1 oracle dba 5788 Jan 22 2005 NFIntro.htm.zh_CN
-rw-r----- 1 oracle dba 5806 Jan 22 2005 NFIntro.htm.zh_TW
-rw-r----- 1 oracle dba 5927 Jan 22 2005 OHSDemos.htm.de
-rw-r----- 1 oracle dba 6708 Apr 26 2005 OHSDemos.htm.en
-rw-r----- 1 oracle dba 6049 Jan 22 2005 OHSDemos.htm.es
-rw-r----- 1 oracle dba 6049 Jan 22 2005 OHSDemos.htm.es_ES
-rw-r----- 1 oracle dba 5962 Jan 22 2005 OHSDemos.htm.fr
-rw-r----- 1 oracle dba 5962 Jan 22 2005 OHSDemos.htm.fr_CA
-rw-r----- 1 oracle dba 6708 Apr 26 2005 OHSDemos.htm.htm
-rw-r----- 1 oracle dba 5989 Jan 22 2005 OHSDemos.htm.it
-rw-r----- 1 oracle dba 5822 Jan 22 2005 OHSDemos.htm.ja
-rw-r----- 1 oracle dba 5902 Jan 22 2005 OHSDemos.htm.ko
-rw-r----- 1 oracle dba 5973 Jan 22 2005 OHSDemos.htm.pt_BR
-rw-r----- 1 oracle dba 5788 Jan 22 2005 OHSDemos.htm.zh_CN
-rw-r----- 1 oracle dba 5806 Jan 22 2005 OHSDemos.htm.zh_TW
drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 Tab_files
drwxr-xr-x 2 oracle dba 96 Mar 13 14:59 _pages
drwxr-x--- 2 oracle dba 96 Mar 13 15:04 dav_public
drwxr-x--- 2 oracle dba 1024 Mar 13 14:59 error_docs
-rw-r--r-- 1 oracle dba 15326 Mar 13 15:04 index.html.de
-rw-r--r-- 1 oracle dba 14643 Mar 13 15:04 index.html.en
-rw-r--r-- 1 oracle dba 15724 Mar 13 15:04 index.html.es
-rw-r--r-- 1 oracle dba 15724 Mar 13 15:04 index.html.es_ES
-rw-r--r-- 1 oracle dba 15481 Mar 13 15:04 index.html.fr
-rw-r--r-- 1 oracle dba 15481 Mar 13 15:04 index.html.fr_CA
-rw-r--r-- 1 oracle dba 14643 Mar 13 15:04 index.html.html
-rw-r--r-- 1 oracle dba 15199 Mar 13 15:04 index.html.it
-rw-r--r-- 1 oracle dba 18542 Mar 13 15:04 index.html.ja
-rw-r--r-- 1 oracle dba 17428 Mar 13 15:04 index.html.ko
-rw-r--r-- 1 oracle dba 15472 Mar 13 15:04 index.html.pt_BR
-rw-r--r-- 1 oracle dba 16961 Mar 13 15:04 index.html.zh_CN
-rw-r--r-- 1 oracle dba 17134 Mar 13 15:04 index.html.zh_TW
drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 ohs_images
drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 sol
drwxr-x--- 2 oracle dba 1024 Mar 13 14:57 win
Any ideas what's wrong ("File does not exist: .../Apache/Apache/htdocs/dsl/apex/apex_admin) ?
Thanks!!!
Scott.
Message was edited by: Scott McMillan
user625897

Your dads.conf says
<Location /pls/apex>
but you say
"When trying to start the App Exp Aministrator at "http://okdev9a.okla.com:3232/dsl/apex/apex_admin" "
Try http://okdev9a.okla.com:3232/pls/apex
instead of dsl/apex..
Cheers,
Vidar

File does not exist: /oa_servlets/AppsLogin

Hi.
The Apache error log reads thus: File does not exist: /oa_servlets/AppsLogin.
The login page appears. BUt when selecting the EBS suite link, or OAM link, the HTTP 404 Not Found appears.
I have checked that all services are up on the server. I have cleared the web cache and rebooted Apache.
The only change to this environment is that I took it out of archivelog mode today.
I am not sure where the /oa_servlets/AppsLogin is supposed to be - if I did then I could verify where it is.
Apart from raising an SR, are there any other ideas for this?
Thank you!
DA

Just checked the dbc file - does not contain any information (how could this happen??)
[ cat da_test.dbc
# $Header: template.dbc 115.4 2000/04/20 11:50:57 pkm ship $
# TEMPLATE.dbc
# Template database configuration file.
# Create one copy of this file for each database instance this
# Applications Server will connect to. Each file should have the name
# <database_instance_name>.dbc
# and be located in this directory ($FND_TOP/secure).
# Change each of the parameters below to values appropriate for
# the database instance. Do not change the syntax.
# This file can be gererated using the AdminAppServer tool.
# This is a java utility that can be run from the command line.
# Instructions to use this tool are documented in the Applications
# Sysadmin Manual.
# TWO_TASK
# SQL*Net name of database.
TWO_TASK=database
# FNDNAM
# Oracle User to be used for Oracle Applications connection.
# The FNDNAM Oracle User must have Oracle Applications privilege level
# 'Universal'.
FNDNAM=APPS
# GWYUID
# Oracle User/Password of the public account to be used for initial
# Oracle Applications connection.
# The GWYUID Oracle User must have Oracle Applications privilege level
# 'Public'.
GWYUID=APPLSYSPUB/PUB
# GUEST_USER_PWD
# Applications User/Password of the Guest user.
# The Guest Applications User is a public Applications user
# with no responsibilities assigned. If no such user exists,
# create one in the 'Define User' form. Do not use a user with
# any active responsibilities. Note: This parameter is for
# an applications user NOT an Oracle user. The Guest user
# is seeded with 11i.
GUEST_USER_PWD=GUEST/GUEST
# THE FOLLOWING PARAMETERS ARE RELEVANT ONLY
# IF JDBC IS BEING USED. IF THEY ARE NOT SUPPLIED, DEFAULTS
# WILL BE USED.
# APPS_JDBC_DRIVER_TYPE
# The type of JDBC driver being used. If no value is supplied,
# the thick (OCI) driver will be used. Give a value of THIN
# or THICK depending on the type of JDBC driver to be used.
# For a detailed discussion on the THIN vs the THICK driver,
# refer to the JDBC documentation. For Release 11i , this
# should be set to a value of THIN.
APPS_JDBC_DRIVER_TYPE=THIN
# DB_HOST
# The host machine on which the database resides. This parameter
# is required only if the THIN DRIVER is being used.
DB_HOST=host_name
# DB_PORT
# The port of the host machine on which the database resides.
# This is required only if the THIN driver is being used.
DB_PORT=port_number
# DB_NAME
# Database instance name.
# This is required only if the THIN driver is being used.
# If no value is provided, the TWO_TASK is used.
# DB_NAME=db_name

Port does not exist

Similar Messages

Maybe you are looking for