Port for recieving sms

I'm working on a sms application and was wondering if there is a port which is available (not used by phone software or app) on mobile phones of all brands?

Hi
If you want to send to the standard port then leave the port number out.
Steve

Similar Messages

Port number while mentioned the RFC for reciever business system

hi
Could somebody tell me what is the port number to be mentioned while specifying the RFC for reciever busines system in the integration builder)configuration phase

Hello..
This might point to an unhanded exception. There should be a backend dump (ST22) available and that would help in more analysis. You might need a ABAPer to look into the dump. You may paste the dump here for more analysis.

I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem?

Problem with an incoming message. For example, during my conversation the second line receives a call, I hear the sound in dynamics such as "piiiip piiiip," but when in this situation I recieve SMS and i hear established melody and I do't hear the person on all over SMS. How to solve this problem? Perhaps someone tell me? save in advance

Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

How to recieve SMS in APplication express

Hi
I have to develop application which can receive sms and answer by sms.For example receive SMS customers number and answer back the dues am interested in developing using Oracle Apex . Please help
Prashant

Hello Prashant
We're using/trialling Orange API. Seems to be a low cost way of sending and potentially receiving SMS from your PAEX App
We only use it to send SMS messages out but the APIs exist to recieve SMS messages also.
[http://tinyurl.com/dzqybk]
In a nutshell, the SMS API enables you to:
- send text messages
- receive text messages through your e-mail and URL
Kind regards
Simon Gadd

Re: Sending SMS and Recieving SMS from chat server

Hi all, I would like to know how can i send sms from J2ME wireless toolkit to a macromedia flash socket server (electroserver) and recieved a feedback from the server that the message is successfully recieved.
as example of what i want was:-
1. user send a sms using j2me wireless toolkit to chat in the flash client chat (IRC)
2. if is a new user, user will need to register their nickname on the server and the server will acknowledge them wether their nickname is already in used or not. so the server will reply the SMS.
Is there any way to do it using J2ME wireless Toolkit or the server may not support such function. please help me and give some advice on how to make this work. Help from all is much appreciated.
Thanks.

You may try this tip for sending SMS from your computer:
Send/Recieve SMS from computer
http://www.java-tips.org/content/view/96/39/

Failed to get the Availability State on server Distriubtionpoint1 for role SMS Distribution Point

Distriubtionpoint1-- Server share distribution point
Distriubtionpoint1-- Acting as site system role (DP)
Distriubtionpoint1--attached under the primary PR0 (Primary server0)
Primary server0-- reporting to CS0 (central site 0)
Distriubtionpoint1-- Windows 2008 sp1 r2 standard
Infrastructure details:-
=============
Distriubtionpoint1 located in different domain with one way trust.
1) Check ping status with FQDN from both domain and it is success.
2) Check port 135, 445, 80,443 through telnet from both domain and success.
3) Primary Server0 account is member of the local admin group on Distriubtionpoint1.
4) Check the PR0-SCCM-DP$ folder NTFS & Share permission
Share permission
a) everyone & local admin group has full control
Security permission
a) System has full permission
b) user has read & exec
4) Local admin full
Sitestat.log error message:
---->: Failed to get the Availability State on server
Distriubtionpoint1 for role SMS Distribution Point. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:15 PM 952 (0x03B8)
---->: Now polling via NAL for SiteObject "["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\" SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:15 PM 952 (0x03B8)
---->: The NAL path ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ is currently not accessible. SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
Info>: Unable to get available space for the Site Object ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\ SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
STATMSG: ID=4701 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_SITE_SYSTEM_STATUS_SUMMARIZER" SYS=Distriubtionpoint1 SITE=PR0 PID=4112 TID=952 GMTDATE=Wed Apr 23 01:00:18.002
2014 ISTR0="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR1="\\Distriubtionpoint1\PR0-SCCM-DP$" ISTR2="2014 04 4 17 04 31 31 000" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8=""
ISTR9="" NUMATTRS=0 SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:18 PM 952 (0x03B8)
for ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\, no connection account is available SMS_SITE_SYSTEM_STATUS_SUMMARIZER
4/22/2014 9:00:18 PM 952 (0x03B8)
---->: GetOperationsManagementData failed to connect to ["Display=\\Distriubtionpoint1\PR0-SCCM-DP$\"]MSWNET:["SMS_SITE=PR0"]\\Distriubtionpoint1\PR0-SCCM-DP$\; error
= 5. SMS_SITE_SYSTEM_STATUS_SUMMARIZER 4/22/2014 9:00:20 PM 952 (0x03B8)

I have tried to access the server share DP from the primary server by using my user
credential. Yes I can able to access the share.
But when I use the system credential to access the share received an error message as shown in below screenshot
Hence i have provided the share and ntfs permission administrators, system, everyone,
primary server account with full control on both tab. but still i am receiving error message.
:\temp>whoami
US\prasath
c:\temp>dir \\PrimaryServer1\SCCM-DP$
Volume in drive \\PrimaryServer1\SCCM-DP$ is Data
Volume Serial Number is 22F0-661B
Directory of \\PrimaryServer1\SCCM-DP$03/17/2014
03:33 PM <DIR> .03/17/2014 03:33 PM <DIR> .
04/01/2014 08:04 AM <DIR> SMSPKG
0 File(s) 0 bytes
3 Dir(s) 514,625,064,960 bytes free
===========================================
C:\Windows\system32>whoami
nt authority\system
C:\Windows\system32>dir
\\PrimaryServer1\SCCM-DP$
Access is denied.

Inconsistent prob when adding listeners to serial ports for sending AT cmds

I have an app that sends and receives SMSs from two different cell phone carriers (lets say verizon and sprint by example).
For that matter i have two cell phones, exactly the same model, one from each carrier, connected to the PC serial ports, COM, COM6 and COM7 being aware that they are available.
-The application communicats with the phones through the a serial communication API and sending AT commands.
-The application can send messages correctly from both phones within the same transaction, this is, i click in send message and the message is sent from both phones.
The problem is when receiving, getting the SMS received by the phones:
-When i have ONE phone connected to the PC it work properly for both phones.
-When i have BOTH phones connected, only Carrier1 phone receives properly.
When checking, i just find out that the problem rises when i try to add the listeners (see code comments below).
When both phones connected there seems to be a problem that i cant figure out, and may be its a conceptual misunderstanding from me.
I attach the code if you can help me,
thank you,
fernando
// class fields
private static String PORT_CARRIER1;
private static String PORT_CARRIER2;
private static CommPortIdentifier portId;
private static Enumeration portsList;
private static SerialPort carrier1SP;
private static SerialPort carrier2SP;
private static InputStream carrier1_input;
private static InputStream carrier2_input;
private static OutputStream carrier1_output;
private static OutputStream carrier2_output;
// ... all the code below is from the app method where everything is initializated
portsList = CommPortIdentifier.getPortIdentifiers();
while(portsList.hasMoreElements()){
     portId = (CommPortIdentifier) portsList.nextElement();
     if(portId.getPortType() == CommPortIdentifier.PORT_SERIAL){
          // try to open ports
          try{
               if(portId.getName().equals(PORT_CARRIER1))
                    carrier1SP = (SerialPort) portId.open("SMS", 5000);
               else if(portId.getName().equals(PORT_CARRIER2))
                    carrier2SP = (SerialPort) portId.open("SMS", 5000);
               else System.out.println("Error " + portId.getName());
          }catch(PortInUseException piue){
               System.out.println("Exception while opening serial ports: "+piue.getMessage());
               continue;
          // try to open input streams
          try{
               if(portId.getName().equals(PORT_CARRIER1))
                    carrier1_input = carrier1SP.getInputStream();
               else if(portId.getName().equals(PORT_CARRIER2))
                    carrier2_input = carrier2SP.getInputStream();
          }catch(IOException ioe){
               System.out.println("Exception while opening input streams: "+ioe.getMessage());
               continue;
          // try to open output streams
          try{
               if(portId.getName().equals(PORT_CARRIER1))
                    carrier1_output = carrier1SP.getOutputStream();
               else if(portId.getName().equals(PORT_CARRIER2))
                    carrier2_output = carrier2SP.getOutputStream();
          }catch(IOException ioe){
               System.out.println("Exception while opening output streams: "+ioe.getMessage());
               continue;
          // adding listeners
          try{
               if(portId.getName().equals(PORT_CARRIER1))
                    carrier1SP.addEventListener(new ListenerPuerto(this, carrier1_input, "CARRIER1"));
               else if(portId.getName().equals(PORT_CARRIER2))
                    carrier2SP.addEventListener(new ListenerPuerto(this, carrier2_input, "CARRIER2"));
          }catch(TooManyListenersException tmle){
               System.out.println("Error while adding listeners: " + tmle.getMessage());
               continue;
          // Adding specific event to listeners
          if(portId.getName().equals(PORT_CARRIER1))
               carrier1SP.notifyOnDataAvailable(true);
          else if(portId.getName().equals(PORT_CARRIER2))
               carrier2SP.notifyOnDataAvailable(true);
          // Setting params to serial communication
          try{
               if(portId.getName().equals(PORT_CARRIER1)){
                    carrier1SP.setSerialPortParams(9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
                    carrier1 = true;
               }else if(portId.getName().equals(PORT_CARRIER2)){
                    carrier2SP.setSerialPortParams(9600, SerialPort.DATABITS_8, SerialPort.STOPBITS_1, SerialPort.PARITY_NONE);
                    carrier2 = true;
          }catch(UnsupportedCommOperationException uscoe){
               System.out.println("Error while setting params for serial communication: " + uscoe.getMessage());
               continue;
          // ... nothing else important ...thanks in advance

Thinking of a java application as its what I am most
comfortable with, but also thinking of having an
apache server, and using jsp pages or servlets...
because I hate formatting things in a java frame..
have never quite mastered that! Any thoughts on what
I should use?I'd prefer a Swing GUI for a maximum of controls. If you have any problems regarding layout, you can post concrete questions here (or even better: the Swing forum).
And my main stumbling block would be how do I send
signals to the green light from the computer? How do
I get signals from the light beams to the computer?
How do I use a serial port (for eg) from a java app.There's an additional library for serial I/O, it's named javax.comm ... should be downloadable somewhere on the java.sun.com site.

API's for sending SMS messages

Where can I find documentation on how to send/receive SMS messages via Oracle WE? Are there any API's available? I am currently on v1.0.2.2.

Hi Friend,
It is a great difficult to find API for sending SMS messages....but i succeeded....for sending SMS messages there is a Class Calles SmsSender and use
sendSms(String mobileno, String message).....it will send message to the given mobile no...before i hope u have configured SMS Properties in Notification.properties file..
and Coming to receive SMS...there is one more Class SmsServer which listens to all the messages coming on the configured port..now you need to customize this class...
All the best....
Cheers
Krishna

Send and recieve sms from oracle(database+application server)

HI all
I Wanted to send and recieve SMS not mails from oracle(database/application server).any possible solutions and what are the things that i required for that.i-e any service provider or any machine or somethings else.

Handle: taimur
Status Level: Newbie
Registered: Aug 3, 2009
Total Posts: 42
Total Questions: 16 (16 unresolved)
so many questions without ANY answers.
http://forums.oracle.com/forums/ann.jspa?annID=718
http://www.lmgtfy.com/?q=oracle+send+sms
Edited by: sb92075 on Nov 20, 2010 7:23 PM

Send and recieve sms

wanted to design a user interface such that i can handle all the incoming and outgoing calls , also send and recieve sms. using oracle 10g
I know that for sure that we can
1a .call
2a send sms
but not sure if we can
1b. recieve a call
2b., receieve an sms.
kindly help..

here is a great article from Grant
http://groundside.com/blog/GrantRonald.php?title=live_demo_of_sending_an_sms_from_forms&more=1&c=1&tb=1&pb=1

How can I send & recieve SMS via Mac ?

How can I send & recieve SMS via Mac ?
Handoff is already working fine between my iPhone 5 & Mac, I want to know how I can send & recieve SMS using my MAC

Thank you so much
I have another problem please:
Handoff is working perfectly between my iPhone 5 & my Macbook pro, I also can receive calls on my mac and iPhone 5 at the same time, but when I try to make calls from my laptop it says that message:
I am already using the same account for both of them

Unable recieve sms messages

I've got a 6230 which has always worked fine until last week it stopped recieving sms messages.
I havn't changed any settings on it - the only thing i can think of thats different is that i swapped batteries with a friends phone, but the new battery i have in it is still the standard BL-5C that comes with the model and the phone was recieving messages for at least a day after i changed the battery so i don't know if this is the cause of the problem..
Any ideas??

Hi there
The same thing happened to me on my brand new N95. I went through all possible tests with my carrier and they determined there was nothing wrong on their end. Was so weird as, like you, I could do everything except receive sms. I ended up taking the 10 day old phone back into the shop and they put the sim card in another handset and it didn't receive sms in that handset either, and the shops sim card did receive sms in my handset.
So I was given a new sim card and problem was fixed. 2 days worth of received sms lost in the ether though No explanation as to why this happened. The sim card was also only 10 days old.
So I would suggest trying your sim card in another handset and seeing if u still have the same probs.
good luck!

Cannot recieve sms, or log sent sms and calls

Pearl 8130
This issue has come and gone a few times while I've had the phone. As of yesterday my phone stopped recieving sms messages. I'm able to send messages however they are only viewable on the sms list for a few seconds then it dissapears. I can send and recieve calls but there is no logging of these at all. Email seems to be unaffected. I've read that this is a problem related to my memory, so I've deleted almost all of my pictures; recordings and videos are gone.
Help me sms again!

Look in Options >Status and post the number next to "File Free."
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Using Serial Port for Non-Serial Data Acquisiton

I searched the forums and couldn't find anything related to this topic.
I saw that it was possible to use the parallel port for simple digital I/O and I was hoping the serial port can be configured the same. It seems all the VISA VI's only want to use the serial port to recieve ASCII chars at a given baud rate, but is it possible to simply poll the status of the serial line at my own speed to see if it is high or low, kind of like a single pin DAQ?
It seems it would be possible as long as the serial data is read and controlled by labview and not by Windows. Let me know if you have any ideas how to approach this problem, or any feedback as to why it is not possible.
Thanks everyone!
Solved!
Go to Solution.

Select Property>Serial Settings>Modem Line Settings. For example, the CTS State is an input to the pc.
Using these lines is a very poor replacement for a scope or DAQ board. The only things you can get back is Asserted, Unasserted, or Unknown. The range of acceptable signals is quite large. Anything between +3 and -3 is an unknown state. Your other signals are +/3 to 15 volts. what kind of signals do you actually want to capture?
edit: There is no such thing as VISA Status so I have no idea what you are actually using.
Message Edited by Dennis Knutson on 07-20-2009 11:09 AM

How to create an inbox for WMA sms?

Hi,
Please can anyone tell me how to create an inbox for the WMADemo that is used for sending and recieving sms. PLEASE HELP!!!

For this you will need persistant storage. The only persistant storage available on J2ME devices are RecordStores. You'll probably need to use that.
Everytime a message comes it, store it in the RMS, and only delete it if the user requests that op.

Port for recieving sms

Similar Messages

Maybe you are looking for