Port forwarding ends in Huawai EchoLife HG612
Hi
port forwarding was working via the internet (no-ip.org) to my computer at home with the BT Infinity router.
Now I get this message:
"A user name and password are being requested by http://martin0574.no-ip.org. The site says: "HuaweiHomeGateway"
Why? And how can I change it back to the BT Infinity router?
Thanks
Martin
Thanks everyone for the comments.
I have just noticed that BT router (Home Hub) did not update my IP address at no-ip.org.
After I reentered all the login data it seems to work.
Similar Messages
-
Linksys WRT610N Port Forwarding
I am finding it impossible to set up port forwarding. No matter what I do I remain completely stealthed when I do a port probe via www.grc.com. The only way I seem to be able to open a port is if I enable remote management. When I do that, whatever port I specifiy as the remote management port is then fully open. Obviously, I can't leave a port exposed like this and, anyway, I need to open multiple ports for my purposes.
Is there a bug? Can technical support please help?
Some background: I'm in the UK and I connect to the internet using the Fibre-to-the-cabinet (FTTC) technology. I have a BT supplied modem (Huawei Echolife HG612) which is completely locked (it is BT property) with no ability to log in and change settings. The WRT610N is plugged into the LAN socket of the modem and connects via PPPoE. Everything else works fine.A firewall does not open or close a port. A firewall blocks or passes transient traffic. Thus if the port is closed on the computer it doesn't matter what the firewall does. The port will never show up as open as long as the port is not in use.
ifconfig
netstat -an -
Port Forwarding for RDP 3389 is not working
Hi,
I am having trouble getting rdp (port 3389) to forward to my server (10.20.30.20). I have made sure it is not an issue with the servers firewall, its just the cisco. I highlighted in red to what i thought I need in my config to get this to work. I have removed the last 2 octets of the public IP info for security .Here is the configuration below:
TAMSATR1#show run
Building configuration...
Current configuration : 11082 bytes
version 15.2
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname TAMSATR1
boot-start-marker
boot system flash:/c880data-universalk9-mz.152-1.T.bin
boot-end-marker
logging count
logging buffered 16384
enable secret
aaa new-model
aaa authentication login default local
aaa authentication login ipsec-vpn local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization console
aaa authorization exec default local
aaa authorization network groupauthor local
aaa session-id common
memory-size iomem 10
clock timezone CST -6 0
clock summer-time CDT recurring
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879941380
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879941380
revocation-check none
rsakeypair TP-self-signed-1879941380
crypto pki certificate chain TP-self-signed-1879941380
certificate self-signed 01
3082024B 308201B4 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383739 39343133 3830301E 170D3131 30393136 31393035
32305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38373939
34313338 3030819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100BD7E 754A0A89 33AFD729 7035E8E1 C29A6806 04A31923 5AE2D53E 9181F76C
ED17D130 FC9B5767 6FD1F58B 87B3A96D FA74E919 8A87376A FF38A712 BD88DB31
88042B9C CCA8F3A6 39DC2448 CD749FC7 08805AF6 D3CDFFCB 1FE8B9A5 5466B2A4
E5DFA69E 636B83E4 3A2C02F9 D806A277 E6379EB8 76186B69 EA94D657 70E25B03
542D0203 010001A3 73307130 0F060355 1D130101 FF040530 030101FF 301E0603
ip dhcp excluded-address 10.20.30.1 10.20.30.99
ip dhcp excluded-address 10.20.30.201 10.20.30.254
ip dhcp excluded-address 10.20.30.250
ip dhcp pool tamDHCPpool
import all
network 10.20.30.0 255.255.255.0
default-router 10.20.30.1
domain-name domain.com
dns-server 10.20.30.20 8.8.8.8
ip domain name domain.com
ip name-server 10.20.30.20
ip cef
no ipv6 cef
license udi pid CISCO881W-GN-A-K9 sn
crypto vpn anyconnect flash:/webvpn/anyconnect-dart-win-2.5.3054-k9.pkg sequence 1
ip tftp source-interface Vlan1
class-map type inspect match-all CCP_SSLVPN
match access-group name CCP_IP
policy-map type inspect ccp-sslvpn-pol
class type inspect CCP_SSLVPN
pass
zone security sslvpn-zone
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 2
crypto isakmp policy 20
encr aes 192
authentication pre-share
group 2
crypto isakmp key password
crypto isakmp client configuration group ipsec-ra
key password
dns 10.20.30.20
domain tamgmt.com
pool sat-ipsec-vpn-pool
netmask 255.255.255.0
crypto ipsec transform-set ipsec-ra esp-aes esp-sha-hmac
crypto ipsec transform-set TSET esp-aes esp-sha-hmac
crypto ipsec profile VTI
set security-association replay window-size 512
set transform-set TSET
crypto dynamic-map dynmap 10
set transform-set ipsec-ra
reverse-route
crypto map clientmap client authentication list ipsec-vpn
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
interface Loopback0
ip address 10.20.250.1 255.255.255.252
ip nat inside
ip virtual-reassembly in
interface Tunnel0
description To AUS
ip address 192.168.10.1 255.255.255.252
load-interval 30
tunnel source
tunnel mode ipsec ipv4
tunnel destination
tunnel protection ipsec profile VTI
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface FastEthernet4
ip address 1.2.3.4
ip access-group INTERNET_IN in
ip access-group INTERNET_OUT out
ip nat outside
ip virtual-reassembly in
no ip route-cache cef
ip route-cache policy
ip policy route-map IPSEC-RA-ROUTE-MAP
duplex auto
speed auto
crypto map clientmap
interface Virtual-Template1
ip unnumbered Vlan1
zone-member security sslvpn-zone
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.20.30.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
ip local pool sat-ipsec-vpn-pool 10.20.30.209 10.20.30.239
ip default-gateway 71.41.20.129
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list ACL-POLICY-NAT interface FastEthernet4 overload
ip nat inside source static tcp 10.20.30.20 3389 interface FastEthernet4 3389
ip nat inside source static 10.20.30.20 (public ip)
ip route 0.0.0.0 0.0.0.0 public ip
ip route 10.20.40.0 255.255.255.0 192.168.10.2 name AUS_LAN
ip access-list extended ACL-POLICY-NAT
deny ip 10.0.0.0 0.255.255.255 10.20.30.208 0.0.0.15
deny ip 172.16.0.0 0.15.255.255 10.20.30.208 0.0.0.15
deny ip 192.168.0.0 0.0.255.255 10.20.30.208 0.0.0.15
permit ip 10.20.30.0 0.0.0.255 any
permit ip 10.20.31.208 0.0.0.15 any
ip access-list extended CCP_IP
remark CCP_ACL Category=128
permit ip any any
ip access-list extended INTERNET_IN
permit icmp any any echo
permit icmp any any echo-reply
permit icmp any any unreachable
permit icmp any any time-exceeded
permit esp host 24.153. host 66.196
permit udp host 24.153 host 71.41.eq isakmp
permit tcp host 70.123. host 71.41 eq 22
permit tcp host 72.177. host 71.41 eq 22
permit tcp host 70.123. host 71.41. eq 22
permit tcp any host 71..134 eq 443
permit tcp host 70.123. host 71.41 eq 443
permit tcp host 72.177. host 71.41. eq 443
permit udp host 198.82. host 71.41 eq ntp
permit udp any host 71.41. eq isakmp
permit udp any host 71.41eq non500-isakmp
permit tcp host 192.223. host 71.41. eq 4022
permit tcp host 155.199. host 71.41 eq 4022
permit tcp host 155.199. host 71.41. eq 4022
permit udp host 192.223. host 71.41. eq 4022
permit udp host 155.199. host 71.41. eq 4022
permit udp host 155.199. host 71.41. eq 4022
permit tcp any host 10.20.30.20 eq 3389
evaluate INTERNET_REFLECTED
deny ip any any
ip access-list extended INTERNET_OUT
permit ip any any reflect INTERNET_REFLECTED timeout 300
ip access-list extended IPSEC-RA-ROUTE-MAP
deny ip 10.20.30.208 0.0.0.15 10.0.0.0 0.255.255.255
deny ip 10.20.30.224 0.0.0.15 10.0.0.0 0.255.255.255
deny ip 10.20.30.208 0.0.0.15 172.16.0.0 0.15.255.255
deny ip 10.20.30.224 0.0.0.15 172.16.0.0 0.15.255.255
deny ip 10.20.30.208 0.0.0.15 192.168.0.0 0.0.255.255
deny ip 10.20.30.224 0.0.0.15 192.168.0.0 0.0.255.255
permit ip 10.20.30.208 0.0.0.15 any
deny ip any any
access-list 23 permit 70.123.
access-list 23 permit 10.20.30.0 0.0.0.255
access-list 24 permit 72.177.
no cdp run
route-map IPSEC-RA-ROUTE-MAP permit 10
match ip address IPSEC-RA-ROUTE-MAP
set ip next-hop 10.20.250.2
banner motd ^C
UNAUTHORIZED ACCESS TO THIS NETWORK DEVICE IS PROHIBITED.
You must have explicit permission to access or configure this device. All activities performed on this device are logged and violations of this policy may result in disciplinary and/or legal action.
^C
line con 0
logging synchronous
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0
access-class 23 in
privilege level 15
logging synchronous
transport input telnet ssh
line vty 1 4
access-class 23 in
exec-timeout 5 0
privilege level 15
logging synchronous
transport input telnet ssh
scheduler max-task-time 5000
ntp server 198.82.1.201
webvpn gateway gateway_1
ip address 71.41. port 443
http-redirect port 80
ssl encryption rc4-md5
ssl trustpoint TP-self-signed-1879941380
inservice
webvpn context TAM-SSL-VPN
title "title"
logo file titleist_logo.jpg
secondary-color white
title-color #CCCC66
text-color black
login-message "RESTRICTED ACCESS"
policy group policy_1
functions svc-enabled
svc address-pool "sat-ipsec-vpn-pool"
svc default-domain "domain.com"
svc keep-client-installed
svc split dns "domain.com"
svc split include 10.0.0.0 255.0.0.0
svc split include 192.168.0.0 255.255.0.0
svc split include 172.16.0.0 255.240.0.0
svc dns-server primary 10.20.30.20
svc dns-server secondary 66.196.216.10
default-group-policy policy_1
aaa authentication list ciscocp_vpn_xauth_ml_1
gateway gateway_1
ssl authenticate verify all
inservice
endHi,
I didnt see anything marked with red in the above? (Atleast when I was reading)
I have not really had to deal with Routers at all since we all access control and NAT with firewalls.
But to me it seems you have allowed the traffic to the actual IP address of the internal server rather than the public IP NAT IP address which in this case seems to be configured to use your FastEthernet4 interfaces public IP address.
There also seems to be a Static NAT configured for the same internal host so I am wondering why the Static PAT (Port Forward) is used?
- Jouni -
HELP!! asa 5505 8.4(5) problem with port forwarding-smtp
Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: endHi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks -
Trying to Port Forward Airport Extreme 802.11ac using Airpot Utility 6.3.2
Hello kind experts. I am finally getting around to replacing my old BEFSR81 Cisco Router with an old Time Capsule attached with the Airport Extreme 802.11ac. The BEFSR81 also had 8 ports, so I have 8 hardwired locations throughout the house. I have a couple of IP cameras for which it was easy to port forward on the Cisco (just click on the port range forwarding tab, type the start/end ranges (which are identical) and the assigned IP address). Everything has been working well for years. Here's what I wish to do with the new setup: Cable Modem -> Airport Extreme -> Dumb gigaport switch with the hardwires connected to it.
When I go to Airport Utility (6.3.2) -> Network Tab -> Port Settings -> "+", the following comes up:
Firewall Entry Type (Defaulted to IPv4 Port Mapping)
Description (5 pull down choices)
Public UDP Ports : _________
Public TCP Ports: __________
Private IP Address (I take it that is where I enter the IP address for each camera, e.g. 192.168.1.xxx)?
Private UDP Ports: __________
Private TCP Ports: __________
I am obviously not a technophile, especially when it comes to networking, but was able to create my old setup.
Any advice on whether or not my configuration is appropriate and what exactly I need to put in the port fields would be greatly appreciated!
Thanks in advance!To successfully access an IP camera on the local network from the Internet, the following basics need to be taken care of:
Install the camera(s) and verify that you can access them from the local network.
Configure port mapping/forwarding on your router. Typically, IP cameras require at least two ports: 1) A web port for administering the camera; Usually TCP port 80, and 2) A streaming port to broadcast the camera video feed; Usually UDP port 9000. Note: You should check with your camera's documentation for the exact ports required.
If the camera is attached to a computer, you will need to configure the computer's firewall to open the same ports as in step 2 above.
Verify that your modem is in bridge mode, i.e., if the modem provides NAT & DHCP services, turn them off.
Test your network. Use CheckIP to determine your router's current WAN-side (public) IP address. Then, from a remote location (not from a computer on the local network), use the DynDNS Open Port Tool to verify that the required ports are open. Success is an "Open" response from the Tool.
Check out the following AirPort User tip for configuring port mapping on an AirPort base station. -
How do you set up Port Forwarding for ARD 2.2 in AEB N?
Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
JimTry the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products) -
SRP547W, How to use multiple WAN IPs for port forwarding?
Hi folks,
We've run into some difficulty trying to take advantage of multiple WAN IPs in conjunction with the SRP547, and I'm hoping someone here can help out or at least tell us that we're going to need to buy a different router...
What we're trying to acheive is the ability to port forward from our distinct public IPs to different internal servers. Looking at the options under Port Forwarding it looks like we can only configure forwards at the "WAN interface" level, but our problem is that we can't work out how to set up separate interfaces for each of our Public IPs...
Our ISP provides us with a fully managed NTU/router with a single "Internet" ethernet port, which we can use by statically configuring IPs on our end. For this configuration this port has been directly patched to the WAN ethernet port on the SRP547W.
We have been allocated a 255.255.255.248 (/29) subnet, giving us 5 usable IPs after the ISP's gateway address is taken into account, like so:
a.b.c.208 Network Address (/29 subnet)
a.b.c.209 ISP Gateway
a.b.c.210 IP1
a.b.c.211 IP2
a.b.c.212 IP3
a.b.c.213 IP4
a.b.c.214 IP5
a.b.c.215 Broadcast Address
On the SRP we've set up the default "Ethernet WAN2" sub-interface with the following details for IP1
VLAN ID: 4088 (Uneditable)
Connection Type: Static IP
Internet IP Address: a.b.c.210
Subnet Mask: 255.255.255.248
Default Gateway: a.b.c.209
The next step (I would have thought) would be to add a second sub-interface, using similar info for IP2
VLAN ID: 4000 (Chosen arbitrarily)
Connection Type: Static IP
Internet IP Address: a.b.c.211
Subnet Mask: 255.255.255.248
Default Gateway: a.b.c.209
When we try to do so however we get:
Fail!
Conflict with Ether_WAN2 interface address type
I should mention at this point that we're running on firmware version 1.02.01 (023).
Any suggestions on how we can proceed?
Is there a CLI or other method of configuration that might work if the web interface won't?
Thanks,
Tim.OK, I've seen reference to this solution before but not much in the way of details. Perhaps you can spell out how this ought to work, as the Software DMZ doesn't behave as I'd expected it to.
As before, on the SRP we've set up the default "Ethernet WAN2" sub-interface with the details for IP1 with a /29 subnet.
VLAN ID: 4088 (Uneditable)
Connection Type: Static IP
Internet IP Address: a.b.c.210
Subnet Mask: 255.255.255.248
Default Gateway: a.b.c.209
We'd now like to expose a server function on IP2, let's say LAN details for this server are:
VLAN: 3000
VLAN IP Range: 192.168.1.1/24
Server IP: 192.168.1.10
Server Port: 80
So first we turn on Software DMZ:
Status: Enabled
Public IP: a.b.c.211
Private IP: 192.168.1.10
WAN Interface: Ether_WAN2
My understanding, based on what you've said, is that this should expose the whole server to external access via IP2. Unfortunately, it doesn't seem to work this way - we don't seem to have any access at all. Perhaps there's a default deny rule on the firewall?
Just to be sure, I tried creating a rule to allow HTTP traffic to the server in the Advanced Firewall page.
In Interface (WAN): All
Out Interface (LAN): VLAN.3000
Source IP: 0.0.0.0
Source Subnet: 0.0.0.0
Destination IP: 192.168.1.10
Destination Subnet: 255.255.255.255
Protocol: TCP
Source Port: Any
Destination Port: Single:80
Action: Permit
Schedule: Everyday
Times: 24 Hours
Still no dice. What am I missing?
Cheers,
Tim. -
Please Help - Only Some Port Forwards Working
Hi all,
I have the most annoying issue with a Cisco 887VA-K9 port forwarding. Some port work while other don’t and I just can’t see why, however I suspect it is a zone based firewall (ZBF) issue.
Port forwards on the follow ports all work fine:
External port 8021 to 192.168.4.253 on port 80 works
External port 8022 to 192.168.4.253 on port 8022 works
All the rest don’t. I also have SIP phones sitting outside the LAN which are unable to register through the internet with the PBX unit which is in the DMZ network 192.168.4..0
Any help would be great appreciated as this sending me mad. Fully running config below.
Louise ;-)
Building configuration...
Current configuration : 36870 bytes
! Last configuration change at 12:49:03 Magadan Fri Nov 8 2013 by cpadmin
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname QQQ_ADSL_Gateway
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 64000
enable secret 4 gim.lMOdQK/21R4Wu.QJfOMAv3CIkRyN.hbSTG5xAxE
aaa new-model
aaa authentication login local_authen local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization exec local_author local
aaa authorization network ciscocp_vpn_group_ml_1 local
aaa session-id common
memory-size iomem 10
clock timezone Magadan 11 0
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-3471381936
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-3471381936
revocation-check none
rsakeypair TP-self-signed-3471381936
crypto pki trustpoint test_trustpoint_config_created_for_sdm
subject-name [email protected]
revocation-check crl
crypto pki certificate chain TP-self-signed-3471381936
certificate self-signed 01
3082022B 30820194 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33343731 33383139 3336301E 170D3132 30373132 31313332
34375A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D33 34373133
38313933 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100AB76 5F7EE03F 306F52A0 91E82E04 7A69528D 1839409C 55BCC55A 47F180A9
7B522E9B FBB96A32 715178FE B96B737E 788947A4 CF4791AA 15609E37 A3F66F07
AD1B8A34 A2877711 E33A613D 8E50AE40 A106DE9C B2B03B95 73392ADB 4BB51FAD
6F2D6F8D A90BA0B5 BD1A209C F54126A9 2E2FF5B7 85041B7E C72032C0 CECE7F79
51550203 010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603
551D2304 18301680 141713AB B7F927E5 50C242DF 9912C3B6 61D93313 80301D06
03551D0E 04160414 1713ABB7 F927E550 C242DF99 12C3B661 D9331380 300D0609
2A864886 F70D0101 05050003 81810099 8EBE5630 2E6734A8 4D2FD0A5 F09A98F8
9E49125F AECEF4BB E0DEBB3A 1A449E38 99B02114 7EC84845 B53C2F88 046B7290
AE44967A 8BE20F5E 9D4A1CFC E1F64FE8 59F51892 23B88B4E 3416808A 68E65660
644C7DA0 E3A7A525 14FE8E54 67C35F8E CF69EB40 34DFB13D EA302F66 102C822A
3D7107BA AA4E7273 1D43690E C4A5D4
quit
crypto pki certificate chain test_trustpoint_config_created_for_sdm
no ip source-route
ip dhcp excluded-address 192.168.0.230 192.168.0.255
ip dhcp excluded-address 192.168.0.1 192.168.0.200
ip dhcp pool QQQ_LAN
import all
network 192.168.0.0 255.255.255.0
default-router 192.168.0.254
dns-server 192.168.0.6 202.1.161.36
netbios-name-server 192.168.0.6
domain-name QQQ.Local
lease 3
ip cef
no ip bootp server
ip domain name QQQ.Local
ip name-server 192.168.0.6
ip name-server 202.1.161.37
ip name-server 202.1.161.36
ip inspect log drop-pkt
no ipv6 cef
parameter-map type inspect global
log dropped-packets enable
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
password encryption aes
license udi pid CISCO887VA-K9 sn FGL162321CT
object-group service MAIL-PORTS
description QQQ User Mail Restrictions
tcp eq smtp
tcp eq pop3
tcp eq 995
tcp eq 993
udp lt rip
udp lt domain
tcp eq telnet
udp lt ntp
udp lt tftp
tcp eq ftp
tcp eq domain
tcp eq 5900
tcp eq ftp-data
tcp eq 3389
tcp eq 20410
object-group network Network1
description QQQ Management Network
192.168.1.0 255.255.255.0
192.168.4.0 255.255.255.0
192.168.5.0 255.255.255.0
192.168.7.0 255.255.255.0
192.168.8.0 255.255.255.0
range 192.168.0.200 192.168.0.254
range 192.168.0.1 192.168.0.25
object-group network Network2
description QQQ User Network
192.168.2.0 255.255.255.0
192.168.3.0 255.255.255.0
192.168.6.0 255.255.255.0
range 192.168.0.26 192.168.0.199
object-group network QQQ.Local
description QQQ_Domain
192.168.0.0 255.255.255.0
192.168.1.0 255.255.255.0
192.168.2.0 255.255.255.0
192.168.3.0 255.255.255.0
192.168.4.0 255.255.255.0
192.168.5.0 255.255.255.0
192.168.6.0 255.255.255.0
192.168.8.0 255.255.255.0
192.168.7.0 255.255.255.0
192.168.10.0 255.255.255.0
10.1.0.0 255.255.0.0
object-group network QQQ_Management_Group
description QQQ I.T. Devices With UnRestricted Access
range 192.168.0.200 192.168.0.254
range 192.168.0.1 192.168.0.25
192.168.1.0 255.255.255.0
192.168.8.0 255.255.255.0
192.168.7.0 255.255.255.0
192.168.5.0 255.255.255.0
192.168.4.0 255.255.255.0
10.1.0.0 255.255.0.0
192.168.10.0 255.255.255.0
10.8.0.0 255.255.255.0
192.168.9.0 255.255.255.0
192.168.100.0 255.255.255.0
192.168.20.0 255.255.255.0
192.168.21.0 255.255.255.0
192.168.22.0 255.255.255.0
192.168.23.0 255.255.255.0
object-group network QQQ_User_Group
description QQQ I.T. Devices WIth Restricted Access
range 192.168.0.26 192.168.0.199
192.168.2.0 255.255.255.0
192.168.3.0 255.255.255.0
192.168.6.0 255.255.255.0
object-group service WEB
description QQQ User Web Restrictions
tcp eq www
tcp eq 443
tcp eq 8080
tcp eq 1863
tcp eq 5190
username cpadmin privilege 15 password 7 1406031A2C172527
username QQQVPN privilege 15 secret 4 Hk2tP2GgJ1xXtJUqIZr4gmNSgw6q1E.rvzWiYnDAZHU
controller VDSL 0
ip tcp synwait-time 10
no ip ftp passive
class-map type inspect match-all sdm-cls-VPNOutsideToInside-1
match access-group 118
class-map type inspect match-all sdm-cls-VPNOutsideToInside-3
match access-group 121
class-map type inspect match-all sdm-cls-VPNOutsideToInside-2
match access-group 120
class-map type inspect imap match-any ccp-app-imap
match invalid-command
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-all sdm-cls-VPNOutsideToInside-4
match access-group 122
class-map type inspect match-all SDM_GRE
match access-group name SDM_GRE
class-map type inspect match-any CCP_PPTP
match class-map SDM_GRE
class-map type inspect match-any SDM_AH
match access-group name SDM_AH
class-map type inspect match-any ccp-skinny-inspect
match protocol skinny
class-map type inspect match-any SDM_ESP
match access-group name SDM_ESP
class-map type inspect match-any SDM_VPN_TRAFFIC
match protocol isakmp
match protocol ipsec-msft
match class-map SDM_AH
match class-map SDM_ESP
class-map type inspect match-all SDM_VPN_PT
match access-group 117
match class-map SDM_VPN_TRAFFIC
class-map type inspect match-any ccp-cls-insp-traffic
match protocol pptp
match protocol dns
match protocol ftp
match protocol https
match protocol icmp
match protocol imap
match protocol pop3
match protocol netshow
match protocol shell
match protocol realmedia
match protocol rtsp
match protocol smtp
match protocol sql-net
match protocol streamworks
match protocol tftp
match protocol vdolive
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map type inspect match-any SDM_IP
match access-group name SDM_IP
class-map type inspect gnutella match-any ccp-app-gnutella
match file-transfer
class-map type inspect match-any SDM_HTTP
match access-group name SDM_HTTP
class-map type inspect match-any SDM_EASY_VPN_SERVER_TRAFFIC
match protocol isakmp
match protocol ipsec-msft
match class-map SDM_AH
match class-map SDM_ESP
class-map type inspect match-all SDM_EASY_VPN_SERVER_PT
match class-map SDM_EASY_VPN_SERVER_TRAFFIC
class-map type inspect match-all sdm-cls-http
match access-group name dmz-traffic
match protocol http
class-map type inspect match-any Telnet
match protocol telnet
class-map type inspect msnmsgr match-any ccp-app-msn-otherservices
match service any
class-map type inspect ymsgr match-any ccp-app-yahoo-otherservices
match service any
class-map type inspect match-any ccp-h323nxg-inspect
match protocol h323-nxg
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map type inspect aol match-any ccp-app-aol-otherservices
match service any
class-map type inspect match-all ccp-protocol-pop3
match protocol pop3
class-map type inspect match-any ccp-h225ras-inspect
match protocol h225ras
class-map type inspect match-any FIREWALL_EXCEPTIONS_CLASS
match access-group name FIREWALL_EXCEPTIONS_ACL
class-map type inspect match-any ccp-h323annexe-inspect
match protocol h323-annexe
class-map type inspect match-any SDM_EASY_VPN_CTCP_SERVER_PT
match access-group 102
match access-group 103
match access-group 104
match access-group 105
match access-group 106
match access-group 107
match access-group 108
match access-group 109
match access-group 110
match access-group 111
match access-group 112
match access-group 113
match access-group 114
match access-group 115
class-map type inspect match-any SIP
match protocol sip
class-map type inspect pop3 match-any ccp-app-pop3
class-map type inspect match-any SDM_HTTPS
match access-group name SDM_HTTPS
class-map type inspect sip match-any ccp-cls-sip-pv-2
match protocol-violation
class-map type inspect kazaa2 match-any ccp-app-kazaa2
match file-transfer
class-map type inspect match-all ccp-protocol-p2p
match class-map ccp-cls-protocol-p2p
class-map type inspect match-all ccp-cls-ccp-permit-1
match access-group name ETS1
class-map type inspect match-any ccp-h323-inspect
match protocol h323
class-map type inspect msnmsgr match-any ccp-app-msn
match service text-chat
class-map type inspect ymsgr match-any ccp-app-yahoo
match service text-chat
class-map type inspect match-all ccp-cls-ccp-pol-outToIn-1
match access-group name ETS
class-map type inspect match-all ccp-protocol-im
match class-map ccp-cls-protocol-im
class-map type inspect match-all ccp-cls-ccp-pol-outToIn-2
match class-map Telnet
match access-group name Telnet
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect http match-any ccp-app-httpmethods
match request method bcopy
match request method bdelete
match request method bmove
match request method bpropfind
match request method bproppatch
match request method connect
match request method copy
match request method delete
match request method edit
match request method getattribute
match request method getattributenames
match request method getproperties
match request method index
match request method lock
match request method mkcol
match request method mkdir
match request method move
match request method notify
match request method options
match request method poll
match request method propfind
match request method proppatch
match request method put
match request method revadd
match request method revlabel
match request method revlog
match request method revnum
match request method save
match request method search
match request method setattribute
match request method startrev
match request method stoprev
match request method subscribe
match request method trace
match request method unedit
match request method unlock
match request method unsubscribe
class-map type inspect match-any ccp-dmz-protocols
match user-group qqq
match protocol icmp
match protocol http
class-map type inspect edonkey match-any ccp-app-edonkey
match file-transfer
match text-chat
match search-file-name
class-map type inspect match-any ccp-sip-inspect
match protocol sip
class-map type inspect match-all sdm-cls-sip
match access-group name dmz-traffic
match protocol sip
class-map type inspect match-all ccp-dmz-traffic
match access-group name dmz-traffic
match class-map ccp-dmz-protocols
class-map type inspect http match-any ccp-http-blockparam
match request port-misuse im
match request port-misuse p2p
class-map type inspect edonkey match-any ccp-app-edonkeydownload
match file-transfer
class-map type inspect match-all ccp-protocol-imap
match protocol imap
class-map type inspect aol match-any ccp-app-aol
match service text-chat
class-map type inspect edonkey match-any ccp-app-edonkeychat
match search-file-name
match text-chat
class-map type inspect match-all ccp-cls-ccp-permit-dmzservice-1
match class-map SIP
match access-group name SIP
class-map type inspect fasttrack match-any ccp-app-fasttrack
match file-transfer
class-map type inspect http match-any ccp-http-allowparam
match request port-misuse tunneling
class-map type inspect match-all ccp-protocol-http
match protocol http
policy-map type inspect ccp-permit-icmpreply
class type inspect ccp-icmp-access
inspect
class class-default
pass
policy-map type inspect p2p ccp-action-app-p2p
class type inspect edonkey ccp-app-edonkeychat
log
allow
class type inspect edonkey ccp-app-edonkeydownload
log
allow
class type inspect fasttrack ccp-app-fasttrack
log
allow
class type inspect gnutella ccp-app-gnutella
log
allow
class type inspect kazaa2 ccp-app-kazaa2
log
allow
policy-map type inspect PF_OUT_TO_IN
class type inspect FIREWALL_EXCEPTIONS_CLASS
pass
policy-map type inspect PF_IN_TO_OUT
class type inspect FIREWALL_EXCEPTIONS_CLASS
pass
policy-map type inspect im ccp-action-app-im
class type inspect aol ccp-app-aol
log
allow
class type inspect msnmsgr ccp-app-msn
log
allow
class type inspect ymsgr ccp-app-yahoo
log
allow
class type inspect aol ccp-app-aol-otherservices
log
reset
class type inspect msnmsgr ccp-app-msn-otherservices
log
reset
class type inspect ymsgr ccp-app-yahoo-otherservices
log
reset
policy-map type inspect http ccp-action-app-http
class type inspect http ccp-http-blockparam
log
reset
class type inspect http ccp-app-httpmethods
log
reset
class type inspect http ccp-http-allowparam
log
allow
policy-map type inspect imap ccp-action-imap
class type inspect imap ccp-app-imap
log
policy-map type inspect pop3 ccp-action-pop3
class type inspect pop3 ccp-app-pop3
log
policy-map type inspect ccp-inspect
class type inspect ccp-protocol-http
inspect
service-policy http ccp-action-app-http
class type inspect ccp-protocol-imap
inspect
service-policy imap ccp-action-imap
class type inspect ccp-protocol-pop3
inspect
service-policy pop3 ccp-action-pop3
class type inspect ccp-protocol-p2p
inspect
service-policy p2p ccp-action-app-p2p
class type inspect ccp-protocol-im
inspect
service-policy im ccp-action-app-im
class type inspect ccp-insp-traffic
inspect
class type inspect ccp-sip-inspect
inspect
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class type inspect ccp-invalid-src
drop log
class class-default
drop
policy-map type inspect ccp-permit
class type inspect SDM_VPN_PT
pass
class type inspect ccp-cls-ccp-permit-1
pass
class type inspect SDM_EASY_VPN_SERVER_PT
pass
class type inspect SDM_EASY_VPN_CTCP_SERVER_PT
inspect
class class-default
drop
policy-map type inspect sip ccp-app-sip-2
class type inspect sip ccp-cls-sip-pv-2
allow
policy-map type inspect ccp-permit-dmzservice
class type inspect ccp-cls-ccp-permit-dmzservice-1
pass
class type inspect ccp-dmz-traffic
inspect
class type inspect sdm-cls-http
inspect
service-policy http ccp-action-app-http
class type inspect sdm-cls-VPNOutsideToInside-1
inspect
class type inspect sdm-cls-VPNOutsideToInside-2
inspect
class type inspect sdm-cls-VPNOutsideToInside-3
pass
class class-default
pass
policy-map type inspect ccp-pol-outToIn
class type inspect ccp-cls-ccp-pol-outToIn-1
pass
class type inspect ccp-cls-ccp-pol-outToIn-2
pass
class type inspect CCP_PPTP
pass
class type inspect sdm-cls-VPNOutsideToInside-1
inspect
class type inspect sdm-cls-VPNOutsideToInside-2
inspect
class type inspect sdm-cls-VPNOutsideToInside-3
pass
class type inspect sdm-cls-VPNOutsideToInside-4
inspect
class class-default
drop log
policy-map type inspect sdm-permit-ip
class type inspect SDM_IP
pass
class type inspect sdm-cls-VPNOutsideToInside-2
inspect
class type inspect sdm-cls-VPNOutsideToInside-3
pass
class type inspect sdm-cls-VPNOutsideToInside-4
inspect
class class-default
drop log
zone security dmz-zone
zone security in-zone
zone security out-zone
zone security ezvpn-zone
zone-pair security ccp-zp-out-dmz source out-zone destination dmz-zone
service-policy type inspect ccp-permit-dmzservice
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-out-zone-To-in-zone source out-zone destination in-zone
service-policy type inspect ccp-pol-outToIn
zone-pair security ccp-zp-in-dmz source in-zone destination dmz-zone
service-policy type inspect ccp-permit-dmzservice
zone-pair security ccp-zp-self-out source self destination out-zone
service-policy type inspect ccp-permit-icmpreply
zone-pair security dmz-to-in source dmz-zone destination in-zone
service-policy type inspect ccp-permit-icmpreply
zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone
service-policy type inspect sdm-permit-ip
zone-pair security sdm-zp-in-ezvpn2 source in-zone destination ezvpn-zone
service-policy type inspect sdm-permit-ip
zone-pair security sdm-zp-in-ezvpn1 source dmz-zone destination ezvpn-zone
service-policy type inspect sdm-permit-ip
zone-pair security sdm-zp-ezvpn-in2 source ezvpn-zone destination in-zone
service-policy type inspect sdm-permit-ip
zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination dmz-zone
service-policy type inspect sdm-permit-ip
zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone
service-policy type inspect sdm-permit-ip
zone-pair security sdm-zp-ezvpn-in3 source ezvpn-zone destination ezvpn-zone
service-policy type inspect sdm-permit-ip
crypto ctcp port 10000 1723 6299
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp policy 2
encr aes 256
authentication pre-share
group 2
crypto isakmp key 6 PbKM_WfaCM[hYNXAFOUgCNgCB_ZdJEAAB address 220.245.109.219
crypto isakmp key 6 NddQRR[O^KY`GRDC[VZUEPE`CSJ^CDAAB address 0.0.0.0 0.0.0.0
crypto isakmp client configuration group QQQ
key 6 UWVBhb`Lgc_AZbDYWDFZiGZTTadNYTAAB
dns 192.168.0.6 202.1.161.36
wins 192.168.0.6
domain QQQ.Local
pool SDM_POOL_1
include-local-lan
max-users 20
max-logins 1
netmask 255.255.255.0
banner ^CCWelcome to QQQ VPN!!!!1 ^C
crypto isakmp profile ciscocp-ike-profile-1
match identity group QQQ
client authentication list ciscocp_vpn_xauth_ml_1
isakmp authorization list ciscocp_vpn_group_ml_1
client configuration address initiate
client configuration address respond
keepalive 10 retry 2
virtual-template 1
crypto ipsec transform-set ESP_AES_SHA esp-aes 256 esp-sha-hmac
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec profile CiscoCP_Profile1
set security-association idle-time 43200
set transform-set ESP_AES_SHA
set isakmp-profile ciscocp-ike-profile-1
crypto map SDM_CMAP_1 1 ipsec-isakmp
description Tunnel to220.245.109.219
set peer 220.245.109.219
set transform-set ESP-3DES-SHA
match address 119
interface Loopback0
description QQQ_VPN
ip address 192.168.9.254 255.255.255.0
interface Null0
no ip unreachables
interface Ethernet0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
shutdown
no fair-queue
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description Telekom_ADSL
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
zone-member security out-zone
pvc 8/35
pppoe-client dial-pool-number 1
interface FastEthernet0
description QQQ_LAN-VLAN_1
switchport access vlan 1
no ip address
interface FastEthernet1
description QQQ_LAN-VLAN_1
no ip address
interface FastEthernet2
description QQQ_WAN-VLAN_2
switchport access vlan 2
no ip address
interface FastEthernet3
description QQQ_DMZ-IP_PBX-VLAN_3
switchport access vlan 3
no ip address
interface Virtual-Template1 type tunnel
description QQQ_Easy_VPN
ip unnumbered Loopback0
ip nat inside
ip virtual-reassembly in
zone-member security ezvpn-zone
tunnel mode ipsec ipv4
tunnel protection ipsec profile CiscoCP_Profile1
interface Vlan1
description QQQ_LAN-VLAN1$FW_INSIDE$
ip address 192.168.0.254 255.255.255.0
ip access-group QQQ_ACL in
ip mask-reply
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
ip tcp adjust-mss 1412
interface Vlan2
description QQQ_WAN-VLAN2$FW_INSIDE$
ip address 192.168.5.254 255.255.255.0
ip access-group QQQ_ACL in
ip mask-reply
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
ip tcp adjust-mss 1412
interface Vlan3
description QQQ_IP-PBX_WAN-VLAN3
ip address 192.168.4.254 255.255.255.0
ip mask-reply
ip nat inside
ip virtual-reassembly in
zone-member security dmz-zone
interface Vlan4
description VLAN4 - 192.168.20.xxx (Spare)
ip address 192.168.20.253 255.255.255.0
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
interface Dialer0
description ATM Dialer
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat outside
ip virtual-reassembly in
zone-member security out-zone
no cdp enable
interface Dialer2
description $FW_OUTSIDE$
ip address negotiated
no ip redirects
no ip unreachables
no ip proxy-arp
ip mtu 1452
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
zone-member security out-zone
encapsulation ppp
dialer pool 1
dialer-group 1
ppp authentication chap pap callin
ppp chap hostname xxxxxxxxxxxxxxxxxxx
ppp chap password 7 xxxxxxxxxxxxxxxxxxxxxxxxx
ppp pap sent-username xxxxxxxxxx0 password 7 xxxxxxxxxxxxxxxxxxxxx
no cdp enable
crypto map SDM_CMAP_1
router rip
version 2
redistribute static
passive-interface ATM0
passive-interface ATM0.1
passive-interface Dialer0
passive-interface Dialer2
passive-interface Ethernet0
passive-interface Loopback0
network 10.0.0.0
network 192.168.0.0
network 192.168.1.0
network 192.168.2.0
network 192.168.3.0
network 192.168.4.0
network 192.168.5.0
network 192.168.6.0
network 192.168.7.0
network 192.168.8.0
network 192.168.10.0
network 192.168.100.0
ip local pool SDM_POOL_1 192.168.5.100 192.168.5.200
ip forward-protocol nd
ip http server
ip http access-class 5
ip http authentication local
ip http secure-server
ip nat pool NAT_IP 192.168.0.210 192.168.0.235 netmask 255.255.255.0
ip nat inside source static tcp 192.168.4.253 5060 interface Dialer2 5060
ip nat inside source static tcp 192.168.0.240 20408 interface Dialer2 6208
ip nat inside source static tcp 192.168.0.240 20409 interface Dialer2 6209
ip nat inside source static tcp 192.168.0.240 20410 interface Dialer2 6200
ip nat inside source static tcp 192.168.1.240 20408 interface Dialer2 6218
ip nat inside source static tcp 192.168.1.240 20409 interface Dialer2 6219
ip nat inside source static tcp 192.168.1.240 20410 interface Dialer2 6210
ip nat inside source static tcp 192.168.7.240 20408 interface Dialer2 6278
ip nat inside source static tcp 192.168.7.240 20409 interface Dialer2 6279
ip nat inside source static tcp 192.168.7.240 20410 interface Dialer2 6270
ip nat inside source static tcp 192.168.8.240 20408 interface Dialer2 6288
ip nat inside source static tcp 192.168.8.240 20409 interface Dialer2 6289
ip nat inside source static tcp 192.168.8.240 20410 interface Dialer2 6280
ip nat inside source static tcp 192.168.0.6 1723 interface Dialer2 1723
ip nat inside source static tcp 192.168.0.6 3389 interface Dialer2 6389
ip nat inside source static tcp 192.168.0.24 3389 interface Dialer2 6390
ip nat inside source static tcp 192.168.4.253 8022 interface Dialer2 8022
ip nat inside source static tcp 192.168.4.253 80 interface Dialer2 8021
ip nat inside source static tcp 192.168.0.254 23 interface Dialer2 8023
ip nat inside source static tcp 192.168.0.6 443 interface Dialer2 443
ip nat inside source route-map SDM_RMAP_1 interface Dialer2 overload
ip default-network 192.168.0.0
ip default-network 192.168.4.0
ip route 0.0.0.0 0.0.0.0 Dialer2 permanent
ip route 10.1.0.0 255.255.0.0 Vlan2 permanent
ip route 10.8.0.0 255.255.255.0 Vlan2 permanent
ip route 192.168.0.0 255.255.255.0 Vlan1 permanent
ip route 192.168.4.0 255.255.255.0 Vlan3 permanent
ip route 192.168.5.0 255.255.255.0 Vlan2 permanent
ip route 192.168.100.0 255.255.255.0 Dialer2 permanent
ip access-list extended ACCESS_FROM_INSIDE
permit ip object-group QQQ_Management_Group any
permit tcp object-group QQQ_User_Group any eq smtp pop3
permit tcp object-group QQQ_User_Group any eq 993 995
permit tcp 192.168.0.0 0.0.0.255 any eq smtp pop3
permit tcp 192.168.0.0 0.0.0.255 any eq 993 995
permit ip 192.168.1.0 0.0.0.255 any
permit ip 192.168.4.0 0.0.0.255 any
permit ip 192.168.5.0 0.0.0.255 any
permit ip 192.168.7.0 0.0.0.255 any
permit ip 192.168.8.0 0.0.0.255 any
permit tcp 192.168.2.0 0.0.0.255 any eq www 443 8080 domain
permit tcp 192.168.2.0 0.0.0.255 any eq www 443 8080 domain time-range QQQ_Control
permit tcp 192.168.3.0 0.0.0.255 any eq www 443 8080 domain time-range QQQ_Control
permit tcp 192.168.4.0 0.0.0.255 any eq www 443 8080 domain time-range QQQ_Control
permit udp 192.168.2.0 0.0.0.255 any eq domain time-range QQQ_Control
permit udp 192.168.3.0 0.0.0.255 any eq domain time-range QQQ_Control
permit udp 192.168.4.0 0.0.0.255 any eq domain time-range QQQ_Control
ip access-list extended ETS
remark CCP_ACL Category=128
permit ip host 203.219.237.252 any
ip access-list extended ETS1
remark CCP_ACL Category=128
permit ip host 203.219.237.252 any
ip access-list extended FIREWALL_EXCEPTIONS_ACL
permit tcp any host 192.168.0.100 eq 25565
permit tcp any eq 25565 host 192.168.0.100
ip access-list extended QQQ_ACL
permit ip any host 192.168.4.253
permit udp any any eq bootps bootpc
permit ip any 192.168.4.0 0.0.0.255
permit ip host 203.219.237.252 any
remark QQQ Internet Control List
remark CCP_ACL Category=17
remark Auto generated by CCP for NTP (123) 203.12.160.2
permit udp host 203.12.160.2 eq ntp any eq ntp
remark AD Services
permit udp host 192.168.0.6 eq domain any
remark Unrestricted Access
permit ip object-group QQQ_Management_Group any
remark Restricted Users
permit object-group MAIL-PORTS object-group QQQ_User_Group any
permit ip 192.168.0.0 0.0.0.255 any time-range QQQ_Control
permit ip 192.168.2.0 0.0.0.255 any time-range QQQ_Control
permit ip 192.168.3.0 0.0.0.255 any time-range QQQ_Control
permit ip 192.168.6.0 0.0.0.255 any time-range QQQ_Control
remark ICMP Full Access
permit icmp object-group QQQ_User_Group any
permit tcp 192.168.2.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
permit tcp 192.168.3.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
permit tcp 192.168.6.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
permit udp 192.168.6.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
permit tcp 192.168.0.0 0.0.0.255 eq www 443 8080 5190 1863 any time-range QQQ_Control
permit udp 192.168.0.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
permit udp 192.168.2.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
permit udp 192.168.3.0 0.0.0.255 eq 80 443 8080 5190 1863 any time-range QQQ_Control
ip access-list extended QQQ_NAT
remark CCP_ACL Category=18
remark IPSec Rule
deny ip 192.168.0.0 0.0.255.255 192.168.100.0 0.0.0.255
permit ip any any
ip access-list extended SDM_AH
remark CCP_ACL Category=1
permit ahp any any
ip access-list extended SDM_ESP
remark CCP_ACL Category=1
permit esp any any
ip access-list extended SDM_GRE
remark CCP_ACL Category=1
permit gre any any
ip access-list extended SDM_HTTP
remark CCP_ACL Category=0
permit tcp any any eq telnet
ip access-list extended SDM_HTTPS
remark CCP_ACL Category=0
permit tcp any any eq 443
ip access-list extended SDM_IP
remark CCP_ACL Category=1
permit ip any any
ip access-list extended SIP
remark CCP_ACL Category=128
permit ip any 192.168.4.0 0.0.0.255
ip access-list extended Telnet
remark CCP_ACL Category=128
permit ip any any
ip access-list extended dmz-traffic
remark CCP_ACL Category=1
permit ip any 192.168.4.0 0.0.0.255
access-list 1 remark CCP_ACL Category=2
access-list 1 remark QQQ_DMZ
access-list 1 permit 192.168.4.0 0.0.0.255
access-list 2 remark CCP_ACL Category=2
access-list 2 remark QQQ_LAN
access-list 2 permit 192.168.0.0 0.0.0.255
access-list 3 remark QQQ Insid NAT
access-list 3 remark CCP_ACL Category=2
access-list 3 permit 192.168.0.0 0.0.0.255
access-list 3 permit 192.168.1.0 0.0.0.255
access-list 3 permit 192.168.2.0 0.0.0.255
access-list 3 permit 192.168.3.0 0.0.0.255
access-list 3 permit 192.168.4.0 0.0.0.255
access-list 3 permit 192.168.5.0 0.0.0.255
access-list 3 permit 192.168.6.0 0.0.0.255
access-list 3 permit 192.168.7.0 0.0.0.255
access-list 3 permit 192.168.8.0 0.0.0.255
access-list 3 permit 192.168.9.0 0.0.0.255
access-list 3 permit 192.168.10.0 0.0.0.255
access-list 4 remark QQQ_NAT
access-list 4 remark CCP_ACL Category=2
access-list 4 permit 10.1.0.0 0.0.255.255
access-list 4 permit 10.8.0.0 0.0.0.255
access-list 4 permit 192.168.0.0 0.0.0.255
access-list 4 permit 192.168.1.0 0.0.0.255
access-list 4 permit 192.168.2.0 0.0.0.255
access-list 4 permit 192.168.3.0 0.0.0.255
access-list 4 permit 192.168.4.0 0.0.0.255
access-list 4 permit 192.168.5.0 0.0.0.255
access-list 4 permit 192.168.6.0 0.0.0.255
access-list 4 permit 192.168.7.0 0.0.0.255
access-list 4 permit 192.168.8.0 0.0.0.255
access-list 4 permit 192.168.9.0 0.0.0.255
access-list 4 permit 192.168.10.0 0.0.0.255
access-list 5 remark HTTP Access-class list
access-list 5 remark CCP_ACL Category=1
access-list 5 permit 192.168.4.0 0.0.0.255
access-list 5 permit 192.168.0.0 0.0.0.255
access-list 5 deny any
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip 192.168.4.0 0.0.0.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
access-list 100 permit ip host 255.255.255.255 any
access-list 101 remark QQQ_Extended_ACL
access-list 101 remark CCP_ACL Category=1
access-list 101 permit tcp any host 192.168.0.254 eq 10000
access-list 101 permit udp any host 192.168.0.254 eq non500-isakmp
access-list 101 permit udp any host 192.168.0.254 eq isakmp
access-list 101 permit esp any host 192.168.0.254
access-list 101 permit ahp any host 192.168.0.254
access-list 101 remark Auto generated by CCP for NTP (123) 203.12.160.2
access-list 101 permit udp host 203.12.160.2 eq ntp host 192.168.4.254 eq ntp
access-list 101 permit udp host 192.168.0.6 eq domain any
access-list 101 remark NTP (123) 203.12.160.2
access-list 101 permit udp host 203.12.160.2 eq ntp any eq ntp
access-list 101 remark QQQ_ANY_Any
access-list 101 permit ip object-group QQQ.Local any
access-list 101 remark QQQ_DMZ
access-list 101 permit ip any 192.168.4.0 0.0.0.255
access-list 101 remark QQQ_GRE
access-list 101 permit gre any any
access-list 101 remark QQQ_Ping
access-list 101 permit icmp any any
access-list 102 remark CCP_ACL Category=1
access-list 102 permit tcp any any eq 10000
access-list 103 permit tcp any 192.168.0.0 0.0.0.255 eq 443
access-list 103 remark CCP_ACL Category=1
access-list 103 permit tcp any any eq 10000
access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq 8022
access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq telnet
access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq www
access-list 103 permit tcp any 192.168.4.0 0.0.0.255 eq 5060
access-list 103 permit tcp any eq telnet host 192.168.0.254
access-list 103 permit tcp any 192.168.0.0 0.0.0.255 eq telnet
access-list 103 permit udp any 192.168.4.0 0.0.0.255 eq 5060
access-list 103 permit udp any 192.168.4.0 0.0.0.255 range 10001 12000
access-list 104 remark CCP_ACL Category=1
access-list 104 permit tcp any any eq 10000
access-list 105 remark CCP_ACL Category=1
access-list 105 permit tcp any any eq 10000
access-list 106 remark CCP_ACL Category=1
access-list 106 permit tcp any any eq 10000
access-list 107 remark CCP_ACL Category=1
access-list 107 permit tcp any any eq 10000
access-list 108 remark CCP_ACL Category=1
access-list 108 permit tcp any any eq 10000
access-list 109 remark CCP_ACL Category=1
access-list 109 permit tcp any any eq 10000
access-list 110 remark CCP_ACL Category=1
access-list 110 permit tcp any any eq 10000
access-list 111 remark CCP_ACL Category=1
access-list 111 permit tcp any any eq 10000
access-list 112 remark CCP_ACL Category=1
access-list 112 permit tcp any any eq 10000
access-list 113 remark CCP_ACL Category=1
access-list 113 permit tcp any any eq 10000
access-list 114 remark CCP_ACL Category=1
access-list 114 permit tcp any any eq 10000
access-list 115 remark CCP_ACL Category=1
access-list 115 permit tcp any any eq 10000
access-list 116 remark CCP_ACL Category=4
access-list 116 remark IPSec Rule
access-list 116 permit ip 192.168.0.0 0.0.255.255 192.168.100.0 0.0.0.255
access-list 117 remark CCP_ACL Category=128
access-list 117 permit ip any any
access-list 117 permit ip host 220.245.109.219 any
access-list 118 remark CCP_ACL Category=0
access-list 118 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.0.255
access-list 119 remark CCP_ACL Category=4
access-list 119 remark IPSec Rule
access-list 119 permit ip 192.168.0.0 0.0.255.255 192.168.100.0 0.0.0.255
access-list 120 remark CCP_ACL Category=0
access-list 120 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.0.255
access-list 121 remark CCP_ACL Category=0
access-list 121 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.255.255
access-list 122 remark CCP_ACL Category=0
access-list 122 permit ip 192.168.100.0 0.0.0.255 192.168.0.0 0.0.255.255
dialer-list 1 protocol ip permit
route-map SDM_RMAP_1 permit 1
match ip address QQQ_NAT
banner login ^CCWelcome to QQQ ADSL GatewayIt turns out the problem had nothing to do with wires or splitters. The Verizon tech was at my house yesterday and the ONT was failing. He replaced part of the ONT and it fixed the problem (finally!). At least I was able to watch the Celtics game last night.
I have a Tellabs ONT. Not sure the model but it's older like the ones in this thread.
http://www.dslreports.com/forum/r19982000-Mounting-board-for-612-ONT -
Time Capsule disconnects internet when using web server through port forwarding
My current config is: 2TB Time Capsule running 7.6.3, Mac Pro running Lion (10.7.5), MacBook Pro running Mountain Lion (10.8.3), and a couple of MacBook Pro Retinas running Mountain Lion. My current ISP is Comcast.
I have the Time Capsule set up to port forward port 80 to the Mac Pro for the purpose of running a web server. Most of the traffic is shuttling fairly large m4v files back and forth to work (work product from video editing work). I can reach the webserver on the Mac Pro just fine from the outside world, and can list files in the directory just fine. When I initiate a download (via right click on a link, "Save As..." or whatever), the Time Capsule reports that the Internet has been disconnected, and all machines inside my network lose access to the outside world. I have to either power cycle the Time Capsule, or disconnect/reconnect the Cat-6 cable between the cable modem and the Time Capsule to re-establish the connection. Interestingly, the download continues and completes on the other end without issue (so, the connection is actually still there!).
Before switching to Comcast, I was on AT&T Uverse - Uverse includes a router, so I had the TIme Capsule set up in Bridge Mode. That worked fine. I also have an older 500GB 1st generation Time Capsule. I set it up with the same config as my 2TB TC, and it shows the exact same behavior - internet disconnects upon initiating a file download through a forwarded port. I then hooked the Mac Pro up directly to the cable modem. I can initiate a download without issue, and I continue to stay connected to the Internet without problem. Called Comcast anyway - they report no errors on the line, but reset the whole device chain anyway. No change in behaviors.
I tried downgrading the Time Capsule software to 7.6.2 (the earliest version that came on it). No dice, same behavior.
So... I called Apple. Complete and utter FAIL. Apple Support reports that they have no training in the port forwarding features of the Time Capule or Airport products, and cannot help me resolve the issue because of that. So, I have a $300 router that apparently cannot perform a simple routing function (download through a forwarded port), that I cannot troubleshoot (because Airport software v7 is an epic fail in that regard), made by a company who cannot support it - and everything this $300 device is doing can be done by a $50 device with a $100 external hard drive?
Do I understand this situation correctly? What have I missed in trying to troubleshoot this thing?Apple Support reports that they have no training in the port forwarding features of the Time Capule or Airport products, and cannot help me resolve the issue because of that. So, I have a $300 router that apparently cannot perform a simple routing function (download through a forwarded port), that I cannot troubleshoot (because Airport software v7 is an epic fail in that regard), made by a company who cannot support it - and everything this $300 device is doing can be done by a $50 device with a $100 external hard drive?
Do I understand this situation correctly? What have I missed in trying to troubleshoot this thing?
Excellent summary.. I think you have covered all the salient points most thoroughly.
Port forwarding on the TC I would put into the category of "epic fail"
I have a nasty feeling it just doesn't work in many cases. Clearly from your situation the port is forwarded correctly.. it is the actual download that is causing the device to crash.. which is probably not the port forwarding itself that is at fault but rather the external link and opening another port for the download to happen.
Many of the issues were caused by using icloud and btmm.. which would work a lot better btw. Although the hassle there is needing to offer that as a service to any Tom Dick or Harry.
Let me suggest a work around or other things to try.
I also have an older 500GB 1st generation Time Capsule. I set it up with the same config as my 2TB TC, and it shows the exact same behavior - internet disconnects upon initiating a file download through a forwarded port.
Use 5.6 utility.. more info below. And take the firmware of this unit (Gen1) back to 7.5.2 (before icloud mess ups in 7.6).
You can go back to 7.5 firmware also in Gen4 TC if it is more than about 14months old.. Simply hold down the option key when you select firmware and the old versions will show up. If your TC came with 7.6.1 (the 7.6.2 was withdrawn as it was even bigger failure than 7.6.3). then you cannot go back.
You might also find downloading via http is not as reliable as using FTP.. FTP is a better and more efficient protocol. It should be no problem to setup ftp server on the mac pro to allow download via ftp even with a browser.
But in the end.. your $50 router suggestion.. well perhaps a little more than that.. $80-100 will work very well.. also this router can be setup with a Hard Disk and offer the files to the internet via FTP.. without needing full network access to your internal network.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0 -
How to IPsec site to site vpn port forwarding to remote site?
Hi All,
The scenario where a Site to Site VPN tunnel has been established between Site A and Site B. Lan on Site A can ping Lan on Site B. My problem is a Printer behind Site B needs to be accessed by using the WAN IP address of Site A. Also i could not ping the remote lan or printer from the router.
Below are my configure on the Cisco 877 in site A. Would you please advise the solution for that?
Building configuration...
Current configuration : 5425 bytes
! Last configuration change at 15:09:21 PCTime Fri Jun 15 2012 by admin01
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Laverton
boot-start-marker
boot-end-marker
logging message-counter syslog
no logging buffered
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone PCTime 10
crypto pki trustpoint TP-self-signed-1119949081
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1119949081
revocation-check none
rsakeypair TP-self-signed-1119949081
crypto pki certificate chain TP-self-signed-1119949081
certificate self-signed 01
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
69666963 6174652D 31313139 39343930 3831301E 170D3132 30363135 30343032
30385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 31313939
quit
dot11 syslog
ip source-route
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.1.1 192.168.1.50
ip dhcp pool DHCP_LAN
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 61.9.134.49
lease infinite
ip cef
no ipv6 cef
multilink bundle-name authenticated
object-group network VPN
description ---Port Forward to vpn Turnnel---
host 192.168.2.99
username admin01 privilege 15 secret 5 $1$6pJE$ngWtGp051xpSXLAizsX6B.
crypto isakmp policy 1
encr 3des
authentication pre-share
group 2
crypto isakmp key mypasswordkey address 0.0.0.0 0.0.0.0
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto dynamic-map SDM_DYNMAP_1 1
set transform-set ESP-3DES-SHA
match address 100
crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1
archive
log config
hidekeys
no ip ftp passive
interface ATM0
description ---Telstra ADSL---
no ip address
no atm ilmi-keepalive
pvc 8/35
tx-ring-limit 3
encapsulation aal5snap
protocol ppp dialer
dialer pool-member 1
dsl operating-mode auto
interface FastEthernet0
interface FastEthernet1
interface FastEthernet2
switchport access vlan 10
shutdown
interface FastEthernet3
interface Vlan1
description ---Ethernet LAN---
ip address 192.168.1.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1420
interface Vlan10
ip dhcp relay information trusted
ip dhcp relay information check-reply none
no ip dhcp client request tftp-server-address
no ip dhcp client request netbios-nameserver
no ip dhcp client request vendor-specific
no ip dhcp client request static-route
ip address dhcp
ip nat outside
ip virtual-reassembly
interface Dialer0
description ---ADSL Detail---
ip address negotiated
ip mtu 1460
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1420
dialer pool 1
dialer-group 1
ppp chap hostname [email protected]
ppp chap password 0 mypassword
crypto map SDM_CMAP_1
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 Dialer0
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source static tcp 192.168.2.99 80 interface Dialer0 8000
ip nat inside source static tcp 192.168.2.99 9100 interface Dialer0 9100
ip nat inside source route-map SDM_RMAP_1 interface Dialer0 overload
ip nat inside source route-map SDM_RMAP_2 interface Dialer0 overload
ip access-list extended NAT
remark CCP_ACL Category=16
remark IPSec Rule
deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
permit ip 192.168.1.0 0.0.0.255 any
access-list 1 permit 192.168.1.0 0.0.0.255
access-list 100 remark CCP_ACL Category=4
access-list 100 remark IPSec Rule
access-list 100 permit ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 remark CCP_ACL Category=2
access-list 101 remark IPSec Rule
access-list 101 deny ip 192.168.1.0 0.0.0.255 192.168.2.0 0.0.0.255
access-list 101 permit ip 192.168.2.0 0.0.0.255 any
route-map SDM_RMAP_1 permit 1
match ip address NAT
route-map SDM_RMAP_2 permit 1
match ip address 101
control-plane
line con 0
no modem enable
line aux 0
line vty 0 4
transport input telnet ssh
scheduler max-task-time 5000
end
Your help would be very appreciated!
PS: I know it is easier if i config Site A as the VPN server but in out scenario, we need to access printer from internet over static WAN IP of site A.
Thanks,
ThaiIs there anyone can help please?
-
Port forwarding for playstation 3
Hi there.
Seem to be having some very frustrating problems with our Time capsule.
I'm not much good with it, technically, however I'm trying to open/move/forward/map (I've no idea!)
port: 3074 to enable a specific online game to work on my playstation.
I've not got any connection troubles between the capsule and the console, but from hat I've learnt,
I need to somehow 'forward port 3074'.
I think I know what I'm doing until after confirming everything and clicking 'update' after I've entered the port number, I'm asked to make corrections before the airport can update!
It specifically asks me to enter the 'beginning DHCP address', which i've discovered is 192.163.1.1,
however it then asks for the 'ending DHCP address', which to be honest I have no idea.
I'm really not clued up at all on any of this, I just want to play a game on my PS3!
Any help would be much appreciated.Hi dlmatthews and welcome to the forum, i've had the same issue, you can't port forward to both, I just DMZ my PS3 and port forwarded to my another PS3 in the household.
If you want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side If the the reply answers your question then please mark as ’Mark as Accepted Solution -
Port forwarding for airport utility 5.6.1
Hi,
The previous version of airport utility had a simple tab "port mapping" that allowed me to forward ports so that various servers running on my machine could be accessible via outside of my WAN/LAN. However, when using the latest version, I don't see anything related to port mapping, the closest I found was an IPv6 Firewall-- which I am not certain is what I am looking for......
Ultimately, I have a development web server that I run on port 3000, and I want this to be accessible from the outside world--- and also I would like VNC guests to be able to do screen sharing / remote access which I believe is through port 5900... How can I make these two things accessible through my standard IPv4 address?
Thank you.Tesserax, you seem to be the Airport Extreme guru. Been trying to find answers on forums all day so as not to duplicate a post. Also tried to find a way to contact you directly so as not to get off topic here...but couldn't see an option.
Running Airport Extreme Version 7.6.1. Hosting a FileMaker Pro 10 file on a PowerPC on my home network (ISP is TimeWarner ...ugh). Need to publish this file to the URL the gent that hosts my site has pointed at my public IP addy here on my home network.
Created DHCP Reservation by MAC Address for the machine hosting to achieve static IP. Have opened ports 80 and 5003 (filemaker) in Port Mapping. Both pointing at the IP addy of that same machine hosting the file. Some discussions have said to make the end of IP .201 or higher for port forwarding so I've done so.
Port checkers all say these ports are still closed. Time Warner has told me they are not blocking either of these ports and that my modem does not have a firewall holding things up—they say the prob is with my router settings.
I should probably also mention that I used to successfully forward these ports and host/access this file via the URL (same ISP and domain host etc. then as currently).
Obviously posting here because none of this is working. Have looked over the links and docs you regularly reply with—hoping you may have other wisdom to give us. Thanks in advance. -
Port Forwarding (for IP Camera)
I have so far been unsuccessful in in setting up my new ip camera for remote monitoring.
I have followed all instructions within the "bt homehub" domain for port forwarding in application sharing but when I check that the port (80) is open (using pfportckecker.exe) it returns "unable to ping your router" and "port is not open or available".
Can anyone help please - I am becoming very frustrated !
Thanks
Solved!
Go to Solution.mikedunk wrote:
I have entered the local ip address (192.168.1.69) which translates to "Unknown-7c-dd-90-05-5e-df"
which I assume to be the ip camera (which is connected wireless)
What am I doing wrong !
Thanks,
Mike
For "Unknown-7c-dd-90-05-5e-df" the bit in bold should be the MAC address of your camera. It is normally printed on the device somewhere.
You can rename this if you wish, by editing the name to something more appropriate.
You should have a created a custom rule called mikes-camera, which with:-
Protocol TCP
Start port 8080
End port 8080
Mapped to 8080
Leave the rest blank.
You should be able to assign this to the device.
A lot depends on which version of the home hub you are using.
What I have found by experience, is that it is better to use a static IP address, if your device supports it, as DHCP can be a bit unreliable when port mapping is involved.
You can use a static address outside of the DHCP range. Like 192.168.1.50.
You can still forward ports to it, by selecting the device by its IP address, not its name.
If you can view your camera within your own network, using http://192.168.1.69:8080 then you just need to persevere with the port mapping.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
How do I do port forwarding on my airport extreme for my IP camera (foscam)?
Hi,
I've been working on this for what seems like a week. I purchased a wireless security camera to put in my house and to see from my laptop (or IPAD2) when I'm away. I am able to see it from either device when I'm here at home, but not when I'm out on the road.
According to the instructions for a mac setup, I needed to set up a DDNS service and get a free account at DynDNS, which I did. They also told me to use a different port than 80, suggesting 8081 as the http port which I plugged in to the camera device setting.. The next step is to do PORT FORWARDING and then I should be able to use my DDNS domain name and port number to login to my camera anywhere...
I'm stuck in how to do this with my airport extreme. I see where I have to go into utilities and click on airport utility, and then manual set-up..
Right now when I click on the Internet tab at the top I see the connection sharing is off (Bridge Mode), and that I have to change it to share a public IP address to get DHCP and NAT to appear in the tabs..
when I go to NAT, the box for enable NAT port mapping protocol is checked and then there is a tab I can click on that says Configure Port Mapping.
I know that I'm supposed to click the plus button + to enter a service and a port and here's where I get stuck
when I click the + button I can either click on the choose a service tab, which then drops down a list of services like Personal File Sharing, Window Sharing, Personal Web Sharing, Remote Login SSH , etc, or just keep it where it says choose a service and not choose one of the services.
Then there are some boxes to fill in for Public UDP Port(s), Public TCP Port(s), PRIVATE IP address-where the only numbers I can change are the last ones and I don't know if I'm supposed to put the IP address of the camera or what? and then the boxes for Public UDP and PUBLIC TCP.
I tried a few times to fill out the port numbers to 8081 (the one I selected for the IP camera) but I don't know what to do for the private IP address. When I changed the last numbers to the IP address of my camera, and went to update, it told me that I had to correct the 2 problems before updating:
DHCP beginning address, and dhcp ending address...as the DHCP range you have entered conflicts with the WAN IP address of your Airport wireless device. So I cancel and am stuck.
Sorry this is so long.. but I really can't get anyone to help me figure this out.. The camera company isn't answering ..
Thanks!!
BarryThanks for the info. I checked the model number on the Westell site to get info on the device. From Westell's info.....
1. Product Description
This ADSL modem is a NAT router with a four port 10/100BaseT Ethernet switch, a USB port and 802.11g wireless interface.
So, while you might refer to it as a "modem" ( a modem will only have one Ethernet port), you have a router or gateway. A gateway is simply a modem and router in the same box.
With the AirPort Extreme, you have 2 routers on the network. Basic networking rules dictate that when there are 2 routers, the first....your Westell.....must handlde DHCP and NAT, and the second router....in this case the AirPort Extreme....must be configured to operate in Bridge Mode so that it will function correctly on the network. That's why the AirPort Extreme is in Bridge Mode. That is the correct setting on your network.
That's also why you were getting the error messages when you tried to configure the Extreme as a second router.
As I mentioned before, any port mapping or port forwarding is going to have to be set up on the "main" router....your Westell. It cannot be set up on the AirPort Extreme. -
How do I set up my air port extreme to do port forwarding? Running 10.7.4 I have a IP camera on my local wireless net work that I want to use from my iPhone 4s and other computers.
In most cable systems, the router you have will plug into your modem and just work automatically. A NAT (Network Address Translation) router takes your external IP and hands out LAN (Local Area Network) based IPs. All of the devices you are working with right now should handle the change automatically unless you've changed from the default automatic configuration.
The problem with your wireless end of this is that the iPhone is not yet 802.11n, only 802.11g. Because that router is not dual band, all of your wifi devices will be forced to slow down to 802.11g speeds. This won't matter much for each device that's connecting to the internet, as your bottleneck is still going to be there. Where you will see slowdowns is device to device connections, like transferring data between the devices.
Maybe you are looking for
-
Airport Card no longer has acceptable range
Ever since the early days of OS 10.4, my airport card range became incapable of connecting more than about 6 feet whereas previously it was able to make a reliable connection 40 feet away through several interior walls. My router is a D-Link DI-624.
-
Revenue account determination In SD
Hi every Body, I have a scenrio , where a Free good condition is created and it is also reflecting in the sales order which i have created , but when I bill that sales order , i do not have a GL effect for that free goods. Ideally i expect the system
-
WPAD location in Windows 8.1
We are retiring our TMG server for internet proxy. Currently we use WPAD with DHCP option 252 and it has been working well. However we want to slowly transition over to the new system which does not use proxy. I have removed the DHCP option for gr
-
This is how you retreive data from database. The file is in c:\Program Files\Apache Software Foundation\Tomcat 5.5\webapps\qsample\WEB-INF\classes\mypackage\ package mypackage; import java.sql.*; import java.util.*; import java.io.*; import javax.ser
-
Reload Software: 552 AND computer can't connect
I've been at this trying to fix my phone for 2 days and still nothing. I installed an app that didn't work (it came up with an error) so I uninstalled it. I told it to reboot later and then later did a battery pull. After that, it came on and said