Port Forwarding / Mapping is not working !?

I've tried everything, searched on Google and nothing seems to work !
First of all, let me explain my problem. I have a Time Capsule connected to my Modem. From my Time Capsule I have a Airport Extreme connected by ethernet on my second floor. So what I want to do is to open the ports 6112 to 6118 on my iMac which is connected by ethernet to my Airport Extreme.
*These are my setting on my Airport Extreme:*
Connexion via Ethernet in bridge mode.
IPv4: via DHCP
*These are my setting for my iMac's network:*
IPv4: DHCP with a manuel ip adress set to 10.0.1.201
*These are my settings on my Time Capsule:*
Connexion via Ethernet and sharing a public Ip adress.
IPv4: Via DHCP
First DHCP Adress : 10.0.1.2
Last DHCP Adress: 10.0.1.200
NAT-PMP Activated
*I also opened the ports in the port mapping section, these are my settings:*
Service: I didn't choose a service
UDP Ports public: 6112-6119
TCP Ports Public: 6112-6119
Private Ip adress: 10.0.1.201
UDP Ports private: 6112-6119
TCP Ports Private: 6112-6119
Now, when I go on the website: http://www.whatsmyip.org/ports/
and do a port test, it says it is closed, there must be something i am doing wrong...
Now if you are wondering why I have set my iMacs IP Address to 10.0.1.201, it is because on all the website I searched an answer they were telling my to put my iP address bigger than the First-Last DHCP Range of my Time Capsule which ends at 10.0.1.200, so I've put 10.0.1.200. I have also tried with other ranges and another ip address within the range and everything, but nothing has worked.
I really hope someone will/can help me,
Thank You very much for your help, and also sorry for my English as I am not very good at it because it isn't my primary language.
Thank you for your comprehension.

This is just a guess, but if you still have that AirPort Extreme, you might plug it in long enough to have AirPort Utility do a File >Export Configuration File, then reconnect the Time Capsule and do a File > Import Configuration File. Once that's done you may have to do a little adjustment to account for the disk drive.

Similar Messages

Port forwarding for SSH not working on WRT54G2

Hi,
I have forwarded a few ports, but can't get port 22 for SSH to work. I can SSH from within LAN, so that works. And I can access FTP from outside the LAN, when I forwarded that port. But to the same computer where I can access FTP I can't access SSH...
Would be grateful for assistance. Btw, I'm using dynamic IP (through DynDNS, but not using the DynDNS tool in the Linksys interface). I've tried with both the dynDNS domain and the IP address. And I have set a fixed IP address on the server I try to access.
Thanks,
Daniel

Make sure that if you are forwarding the port nos for SSH on WRT54G2 you need to forward it for the assinged static ip address & it should work great..just try it once.

E3200 Port forwarding doe's not work

I have Linksys E3200 and do forwarding as described Here, but it act like it does not check forwarding rules, no forwarding happens, I'm trying to open RDP(3389) port, from local network I can connect normally. routers firmware version is Ver.1.0.05, I have protocol analizer on pc where i'm trieing to forward packet, the packets don't reach PC on 192.168.0.254

Internet Service Provider and Modem Configurations
What ISP Service do you have? Cable or DSL?
What ISP Modem Mfr. and model # do you have?

Is it possible to downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

is it possible to downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

best answer to your question I've ever seen is;
Kappy Tampa, FL and Vancouver, BC
Re: Downgrading Oct 16, 2012 2:57 PM (in response to nbabbit2013)
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

In my MacBook Pro Maps app not working properly?.. any solution

Maps app not working properly?.. any solution

If i search any routes by clicking directions tab,the message shows like this " DIRECTIONS ARE NOT AVAILABLE A ROUTE TO THE DESTINATION FROM ITS NEAREST ROAD CANNOT BE DETERMINED"

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

My USB port on my Macbook Pro stopped working and i tried the SMC reset and the one closest to the SD port still continues to not work. Is there anything i can do besides bringing it in?

I would do another SMC reset. If nothing changes you should take the computer in to an Apple store for a free diagnostic. You should make an appointment.
http://www.apple.com/retail/geniusbar/

With version 5 of Firefox, if I open more than 1 session, most of the time I cannot see anything in the navigation bar and my back and forward buttons do not work.

I open 1 session of Firefox 5.0.1 and everything seems to work fine. Then I open a second session of Firefox and most of the time the navigation bar does not show the page that I am on and the back and forward buttons do not work. When this happens, the first session always remains working. I am an internet marketer so I have at least 2 or 3 sessions going at any given time.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Input Parameter Mapping is not working in Sap HANA

Hi, We created on ANALYTICAL view(A) with Input Parameters, on top of Analytical view created one Calculation view(B) and mapped Calculation view input parameter with Analytical view input paramter and its working fine. Finally we created one more calculation view on top existing calculation view(B) and mapped with corresponding input parameters. Input parameter mapping is working fine in between A(analytical view) and --------> B (first Calc view) but input parameter mapping is not working properly in between B(first Calc View)-----------C(second Calc View). it is giving all data whatever is coming from Calc View B. Kindly help us to resolve this.

Hi,
Write c in small for Command,
theButton.mappingOfOnAction().addParameter("command","Save");
Regards,
Murtuza

Maps is not working properly anymore

I am using iPad2 with iOS6 and since a few days Maps is not working properly anymore

I'm having the same problem. I have a 4th gen 32GB iPod Touch, and since upgrading to iOS6, iMessage has been nothing but buggy. It will work for an hour or so, and then randomly stop working as it won't send or receive messages. There's nothing wrong with my wifi, because that's the same as it was before. I really hope someone knows something to fox this problem. Some people use iMessage for good reasons - it needs to be a reliable messaging service like it was in iOS5.

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Maps app not working on Network Users

Maps app not working on network users on client machines?, is everyone having same issue?, Thanks in Advance

Sometimes it does, sometimes it does not. I assume we're talking about network users with home folders on a remote volume…
The only thing I could do about it was to inform Apple…

All Ports/Plugins Do not work. Compaq Presario SR5233WM Desktop PC

Hello,I am here today With a problem of Mine that I can't seem to fix on my own.I have the Compaq Presario SR5233WM Desktop PC And I have Not used it In about 10-12 months And I have finnaly turned it on to Try and use it for some stuff and I plugged it in the wall And It starts up normally no beeping sounds or nothing.So After I did that I plugged the Blue video cord into my PC and my monitor And Before this I rememberd My USB ports wouldnt work And I could not test them out again because my video did not seem to work,I had asked around and They said something about my Drivers Need Resseting? I kept on Getting different answers when I ask so I came here. So to sum everything Up. How do I reset my drivers Without Video And/or What is the problem and how to fix it with the ports not working..Thanks for your time.

Hello again ZhayneW,
Thank you for the updated information on your issue. I would like you to try the steps I am providing you below in order until your graphics return:
Step 1. As you have tried different monitors I would like you to try different cables. The cables that go from your monitor to your computer could be the issue as well. According to the Compaq Presario SR5233WM Desktop PC Product Specifications page your computer has the IPILP-LC (Lancaster8) IPILP-LC (Lancaster8) and has following I/O ports with number 2 being a VGA connection and number 7 being the USB ports you state do not work. If you are using a VGA cord to connect your monitor to the computer that is the cord I would like to see replaced or swapped out with if possible. If you have already done this move on to the next step and ensure you let me know in your next post.
Step 2. Turn off the computer and unplug the power cord and open it up and place your had on the power supply for about 30 seconds to drain any electrical charge you may be holding. Now on the motherboard on the front (opposite the I/O connection indicated above) left hand side you will see the following jumpers:
These are the jumpers you need to use to clear the CMOS on your computer. Now on the off chance that your USB and Intergrated graphics have been disabled in the BIOS I am going to get you to clear the CMOS settings by moving the jumpers to look like the image below:
Leave the jumpers in this position for about 10 seconds and then return them to their original position. Reassemble the computer and do not plug it in until it is totally back together. If this was successful your computer should boot up and your display should be back.
Step 3. At this point the issue appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options. You could also go to a local computer repair and look to get it repaired as well.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

My back and forward buttons do not work also the refreash button does not work, I have reloaded the latest version of fire fox and that did not help. HELP please.

My back and forward buttons do not work also the refresh button does not work, I have reloaded the latest version of fire fox and that did not help. All of navigation tool bar worked until I updated Fire Fox, now if I click on a link in yahoo, for instance, I can not get back to my yahoo home page without reloading Fire Fox. HELP please.

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

Maps are not working in India after updating to iOS 6

I bought my iPhone 4S from USA now I am in India and I updated to iOS 6 but now maps are not working.. Earlier it use to search every single place in india.. What to do??

me too stuck up with the iOS 6 update. I was using my phone mainly for tracking roads and places. Now its useless. So guys if u r using iOS 5.1 in India dont update to iOS 6.Moreover i cant find google maps app in Appstore! can anyone find me a solution?

Port Forwarding / Mapping is not working !?

Similar Messages

Maybe you are looking for