Port forwarding no longer working

i recently moved in with my boyfriend and he has fios and before i moved in we played minecraft on a server he hosted and after like a weekof hosting it, his portforwarding no longer worked. after going threw every thing we could find we gave up. and now im wanting to host a server again but i still cant get the port forwarding to work right. ive read every thread, watched every video of ppl with similiar problems but none of it fixes my problem.
http://i41.tinypic.com/24wwvol.png
here is a screenshot of the port forwarding page. i mean im pretty sure we are doing it right as it worked for about a week then stopped for some reason that we cant figure out. we have no firewalls on or anything.
the port is 25565. If sumone would please help that would be amazing.
Solved!
Go to Solution.

#1 In the router at the first page that you see after you log-in, one of the IP Address should be the same IP Address that is in the paragraph as
There is no standard governing the format of these machine names, so this is not something we can automatically determine for you.
at https://www.grc.com/x/ne.dll?bh0bkyd2
#2 If not, please report back that fact.
#3 In the router go to Advanced -> Universal Plug and Play OR Advanced -> UPnP (Which ever exist in your router)
#4 If you do not have at least two special computers that support Universal Plug and Play (UPnP) where you can not define the ports that they use, turn off UPnP in the router.
A perfect example. At least two game consoles. Any two (Two Xboxes, two Playstations, One Xbox and one Playstation).
#5 If you have at least two special computers that support UPnP where you can not define the ports that they use: Do only use one at a time OR are there times when at least two are on?
#6 In the router go to Advanced -> IP Address Distribution
#7 What is the Starting and Ending IP Address?
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

WRT54G. DMZ/port forwarding no longer works?

I have a computer hosting an IIS web site / other services (to the internet) that had been working for a long time. Now, no matter what I do, I can not get it to work anymore, it's driving me crazy. I can access the services on my local network using 192.168.1.x, just not from the internet IP. The computer's IP is configured as the DMZ, I also tried specifically port forwarding instead. Windows firewall has exceptions for the ports, and I even tried turning it off temporarily, no luck. I am running out of ideas. Can anyone help? Any ideas?

I've also got this problem. Though I swore it used to work with 4.21.1 initially. Regardless, this is weak & annoying so hopefully I can get my hands on 4.20.7 & downgrade.
Also, in the last several months I've had to reflash & reprogram the device from scratch to "unbrick" it ... basically it would stop forwarding packets between the inside & outside interfaces. Meaning I could ping/manage it from the internet but not the LAN or vice versa. I assumed the issue was a corrupt configuration sine each time I had to rebuild my configuration from scratch after reflashing the firmware. Just restoring the configuration from a backup left things in the same unusable state as before.
Hopefully Linksco will address these issues and get rid of this wonky firmware version in favor of a stable one.

My mini dvi output port is no longer working (2007 iMac) please help!

My mini dvi output port is no longer working, can this be replaced or do I need a new motherboard? (it's a 2007 iMac, no longer under warrantee. Long story short when I was out of town someone cut my power cord on my tv I went to turn the tv on and looked at the back of the tv to see if there was any loose connections and found the cord sliced 3/4 of the way through. I must have bumped the cord and it sparked and made a loud pop noise. Well it fried the tv (which has since been fixed) but everything that was connected to it (my ps3, receiver, and my iMac) ports are all not working now... (and yes i did try new hdmi cables to see if it was just that) If this is a hardware issue what exactly is needed to fix this? A new main board? Any feedback would be great on this. I took it to apple and they said $650 to replace the motherboard... Was just wondering if this port can just be replaced or if it is a part of the main board and that does need replacing. Everything else works fine on all three things (ps3, receiver, imac) just the outputs are fried on them. Is there any other way I can do video out of my iMac other than mini dvi? I'm not paying for the repair so I don't mind having apple replace the board, but for $650... I may as well get a new iMac for $500 more...

If Apple said the motherboard is gone, that's your answer. Even if you were to find out the port isn't part of the main board, it's all connected when you're talking about a power surge/short as you described it. And yes, I'd never invest $650 in a 5 year old computer.

How to get Port Forwarding to 8080 working on HH2

Hi,
How can I get port forwarding to 8080 working on my HomeHub2?
I have a QNAP TS219P NAS connected via wired Ethernet to my HomeHub2.
This has a Web Administration facility that should enable me to access & manage the NAS over the Internet.
I have set the NAS to have a fixed IP address of 198.162.1.100 and enabled a dyndns account to point to my ISP WAN IP. I then used Application Sharing on the HH to forward all traffic to 8080 to the NAS device (called "Kermit" in my case).
However, using http://mysite.dyndns.org:8080 simply brings up the admin page of the Home Hub.
Despite the HH telling me the port is forwarded correctly, http://www.canyouseeme.org reports the port as - "Error: I could not see your service on nn.nn.nn.nn on port (8080) ...Reason: Connection refused"
My HH firewall is set to "Default" (Allow all outgoing connections and block all incoming traffic. Games and application sharing is allowed.), but I have tried disabling it and this made no difference at all.
I know that dyndns and port forwarding are working in other respects, since I also set the NAS up as a Web Server with a simple home page, and forwarded port 80 on the HH through to the NAS. Requests over the Internet for the http://mysite.dyndns.org:80 home page work fine...
There's nothing in the HH Event log that I can make sense of and I'm going mad...
Is anyone able to talk me through some good ideas of how to progress this?

Another thing I thought of- did you setup the port forwarding to forward to your named IP address or to the hostname?
I would recommend setting the port forwarding to your named IP address:
http://192.168.1.254/app_config.lp?be=1&l2=0&l0=2&l1=4
In this menu (Application Sharing -> Configuration, select "User Defined" in Device. A textfield entry box appears below device and hardcode 192.168.1.100 in there).
Finally, any logs on the QNAP for your external connection attempts? - Could it be passing through the HomeHub and then get rejected by the QNAP?

WRT54G2 - Port Forwarding is not working properly?

I have a WRT54G2 model #1 with firmware Version 1.0.00 setup as a static IP address connection from my data provider. The router provides service to an Internal IP network of 10.50.6.___. The connection is working properly and I am able to access external IP's from all internal computers. I am attempting to have all inbound traffic on port 9100 forwarded to 10.50.6.49 (a network printer). I set up port forwarding and enabled it according to previous posts in this forum, and I see the inbound traffic in the log, but nothing appears to be getting to the printer. I am able to ping the printer from the router, and print to it from internal PC's. I am fairly new at this process but know enough to be dangerous. How can I tell if the traffic is actually being routed to the printer or is getting lost in the router?
Thank you!

Hey try resetting the router reset button in such a way that power light is blinking on the router & then do a complete network power cycle i.e., unplug the power cables from the modem & from the router & then plug in the power cable to the modem first once all the lights are solid green you could plug in the power cable to the router & check out it will definately work!!

WRT120N - DMZ works, port forwarding doesn't work; only one device allowed in DMZ

Hi,
I have an WRT120N router and two DVRs. I can get either one of the DVRs to work just fine if I put it in the DMZ. Neither one works when I enable port forwarding. Since I cannot have two devices in the DMZ with this router, I cannot use that approach (throwing them in the DMZ) as a viable solution.
I need help finding out what I am doing incorrectly with the port forwarding. Basically I am creating an entry for each port of each device, going to the correct IP address of that device. I have tried both protocols as well as just TCP. This does not work. Just for fun, I tried using the port range forwarding and this does not work either. The only thing that works is if I throw either of the devices in the DMZ.
So what I have essentially is this:
DEVICE1 / 192.168.0.120 (internal) / PORT 999 / works great in DMZ but not in port fwd
DEVICE2 / 192.168.0.121 (internal) / PORT 456 / works great in DMZ but not in port fwd
I have used Wireshark from a remote computer to observe what happens when I navigate to the URL that I need, such as http://myjunk.ddnsprovider.xyz:999 (where 999 is the port on which the device in question serves). I don't see anything out of the ordinary. (I assume there is no way to run a packet sniffer on the router.) (Can we "telnet" into the router, btw?)
So either I am doing something wrong, or there is a need for a router software update, or the router is blocking some other protocol, etc. Help is much appreciated! BTW, tried with the router firewall off, too. No go.
Regards,
Mike

Whats the current firmware installed on your router? Have you tried to upgrade the firmware on your Router?

Port forwarding is not working on SRP521W

Hello,
I have a problem with incoming traffic.
I opend 3 ports as followed:
I have olso anabbled de remote web menagement on port 888.
From the outside i can access the remote management. but i cannot access my webserver on prot 80 or 443. I have checked with the isp provirder en these port or not blocked.
Can anywane help,
Thanks,

Hi Danny, to my recollection there are not any bugs on the current releases for the SRP for forwarding.
To affirm, you have went to Network Setup -> NAT -> Port forwarding
Also, are you able to log in to the server locally with the LAN IP address using an internet browser for http and https?
-Tom
Please mark answered for helpful posts

Port forwarding 3389 not working!! help!! needed urgently

i am trying to forward the RDP port to a terminal server inside my LAN. but things are not working for me. Router is 801 ISDN
my config is..
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
hostname edi-ISDN
ip subnet-zero
ip name-server 213.x.x.20
ip name-server 195.x.x.222
isdn switch-type basic-net3
nterface Ethernet0
ip address 192.168.0.254 255.255.255.0
ip nat inside
interface BRI0
no ip address
ip nat outside
encapsulation ppp
dialer pool-member 1
isdn switch-type basic-net3
ppp authentication pap callin
interface Dialer1
ip address negotiated
ip nat outside
encapsulation ppp
dialer pool 1
dialer idle-timeout 500
dialer string 4004444
dialer hold-queue 10
dialer-group 1
ppp authentication pap callin
ppp pap sent-username xxxxxxx password xxx
ip nat inside source list 101 interface Dialer1 overload
ip nat inside source static tcp 192.168.0.100 3389 interface Dialer1 3389
no ip http server
ip classless
ip route 0.0.x.x x.0.0.0 Dialer1
access-list 1 permit 192.168.0.0 0.0.0.255
access-list 101 permit ip 192.168.0.0 0.0.0.255 any
dialer-list 1 protocol ip permit
line con 0
password xxx
transport input none
stopbits 1
line vty 0 4
password xxx
login
no rcapi server
the ip nat translation output was
Pro Inside global Inside local Outside local Outside global
udp 86.96.x.x:1166 192.168.0.123:1166 86.96.60.5:123 86.96.60.5:123
udp 86.x.x.249:123 192.168.0.100:123 192.168.79.1:123 192.168.79.1:123
tcp 86.96.130.249:3824 192.168.0.123:3824 64.152.73.172:80 64.152.73.172:80
udp 86.x.x.249:123 192.168.0.100:123 192.168.56.1:123 192.168.56.1:123
tcp 86.96.130.249:3389 192.168.0.100:3389 --- ---
udp 86.96.130.249:1143 192.168.0.123:1143 213.42.20.20:53 213.42.20.20:53
edi-ISDN#show ip nat trans
Pro Inside global Inside local Outside local Outside global
udp 86.96.130.249:1166 192.168.0.123:1166 86.96.60.5:123 86.96.60.5:123
udp 86.96.130.249:123 192.168.0.100:123 192.168.79.1:123 192.168.79.1:123
tcp 86.96.130.249:3824 192.168.0.123:3824 64.152.73.172:80 64.152.73.172:80
udp 86.96.130.249:123 192.168.0.100:123 192.168.56.1:123 192.168.56.1:123
tcp 86.96.130.249:3389 192.168.0.100:3389 --- ---
udp 86.96.130.249:1143 192.168.0.123:1143 213.42.20.20:53 213.42.20.20:53

update ip nat translation shows that the connection touches the outside interface(dialer1) of the router but then it disconnects.
=====================================
Pro Inside global Inside local Outside local Outside global
tcp 86.96.131.184:80 192.168.0.100:80 --- ---
tcp 86.96.131.184:3389 192.168.0.100:3389 86.96.139.115:29083 86.96.139.115:29083
tcp 86.96.131.184:3389 192.168.0.100:3389 --- ---

Port Forwarding doesn't work even though I did everything properly

I am trying to set up a server that went down after I tried a different way of hosting it with a program that messed everything up and when ever i try forwarding any port, even though I know how, I do everything I need to do and I check if my port is open on canyouseeme.org and it shows up as no route to host. Is there a firewall in the airport i need to disable for it to work?

Problem fixed. Had to uninstall Flash from the control panel and then reinstall.

Airport Ext. Port Forwarding does not work

I am trying to open up UDP ports 500, 1701, and 4500 to point to my local computer since i'm using iVPN. However, Airport doesn't seem to want to open these up. I disabled Mobile Me as per the support document I found and still having issues.
I want to be able to VPN via my iPhone and/or MacBook Pro into my home network.
My Mac Mini is running 10.6.5 with all the latest updates. My Airport Ext has the Wireless N with latest updates as well.
Any help appreciated. I have spent over 2 hours searching on google and could not find any documents that actually got this to work.

To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the iVPN device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the iVPN host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <ignore this for now; it will change to Custom once you start entering values>
o Public UDP Port(s): 500, 1701, 4500
o Public TCP Port(s): 1723
o Private IP Address: <enter the DHCP-Reserved IP address you created earlier>
o Private UDP Port(s): 500, 1701, 4500
o Private TCP Port(s): 1723
o Click "Continue"

When I get into my email, the back and forward no longer works.

When checking my mail, I will click on a site, then click again to view something within; the arrows (back/forward) fade and no longer function, thus not able to use.

Probably the "Babylon" toolbar if Thunderbird is involved. Firefox does not do email. though.
Clear your cache -- Tools > Options > Advanced > Network > Clear now
(simple to do, but not directed at any specific problem)
Extensions that may '''interfere with Back Button''', and these are already listed in [http://kb.mozillazine.org/Problematic_extensions Problematic extensions] for other reasons -- Q805964
*McAfee Site Advisor (update perhaps 3rd week July 2011)
*Yahoo Toolbar (https://support.mozilla.com/questions/845691)

Forwarding no longer works for my Skype number

My business relies on my Skype phone number forwarding to my cell phone, and then to my Google Voice for voicemail. In the last few days, it's been brought to my attention by clients that the phone rings 12 times and then gives a fast busy signal. I tested tonight and got the same results. I went through all the troubleshooting guides and can find nothing wrong. The number is 310-574-2804, if anyone wants to test it. Trying to get this resolved by tech support, but I guess they would rather pawn their support off to the community... Help me out, everyone!
Thanks,
George

soundgun wrote:
My business relies on my Skype phone number forwarding to my cell phone, and then to my Google Voice for voicemail. In the last few days, it's been brought to my attention by clients that the phone rings 12 times and then gives a fast busy signal. I tested tonight and got the same results. I went through all the troubleshooting guides and can find nothing wrong. The number is 310-574-2804, if anyone wants to test it. Trying to get this resolved by tech support, but I guess they would rather pawn their support off to the community... Help me out, everyone!
Thanks,
George
Has support responded, if so what did they say? If not, please contact customer support here, again: https://support.skype.com/en/faq/FA1170/How-can-I-contact-Skype-Customer-Service
About Me You can also use a IP Camera as your camera for Skype video Example Instructions

Port Forwarding - Old Rules work, new ones don't

As per subject 2 rules I created in Oct work fine.
2 I've created today don't.
If I reboot the HomeHub, will that change my IP Address and upset my line speeds / profile ?
Thanks

We had the same error message here. We resolved it by changing the format of the password in the bc4j.xcfg file. To do this, find the bc4j.xcfg file in your project directory. Using notepad or another external editor, edit the one under the "src" directory. Find the password tag under your connection in the file.
Edit it so that it reads like this:
<password value="<yourpassword>" />
Let me know if it worked..
BTW, I have also heard that upgrading your Java instalation on your server will also fix the problem, but we have not tried that.

Thunderbolt ports no longer working

My iMac 27" running Mountain Lion Thunderbolt ports are no longer working out of no where. I leave on a Friday, come back into the office on Monday and my second display, my Black Magic Monitor Card, all of my Thunderbolt drives no longer work with the iMac, but each device works fine with other Macs.
I've reset the PRAM and SMC over 5 time each, but to no avail.
Mountain Lion 10.8.5
Thunderbolt Firmware 23.10
No updates avail besides Mavericks (which I can't because of certain 3rd party plugins not supporting it yet)
Any idea of a solution besides Apple Store?

See Using Apple Hardware Test.

HH3 Type B port forwarding not working.

Hi there.
I have searched absolutely everywhere for a solution to my problem before posting here. Basically port forwarding isn't working at all on my HH3 Type B router.
I've read all about the problems people have had with the Type A's but as far as I see nobody seems to have a problem with the Type B in regards to port forwarding or loopback.
I've set up port fowarding on many different routers with many different ISP's so I don't think it's something I'm doing, or rather, not doing but you never know.
These are the steps I take when setting up port forwarding:
Firstly setting up my static IP (obviously only needed to be done once) which I've chosen one outside of the routers DHCP range as I've always done in the past. Then I open the router screen, go to Settings / Advanced Settings / Port Forwarding / Supported Applications and click "Add new game or application".
I then enter a name, change "Copy existing game or application" to "No", and then change the "Protocol" to UDP or TCP as needed (also have tried using "Any" too with no luck). Next add a "Port Range" for example 12345 - 12345 then add "Translate To" 12345 - 12345 (port ranges obtained from portforward.com per application) then click "Add" and repeat for additional ports as needed.
Once that is all done, click "Apply" then go to Port Forwarding / Configuration or go to Home Network, select the applicable device and choose the newly added application from the "Port Forwarding" drop down list (and choose applicable device if doing it from Port Forwarding / Configuration). Click "Add" once application is selected.
Add additional applications where needed then finally click "Apply" to store the forwarded ports.
Close router page and port forwarding should be fully setup and working.
That's basically how I would do it anyway, but I also checked on portforward.com and it says pretty much the same and on these forums as well as a few other sites and I see nothing different but port forwarding still isn't working.
In my router "Event Log" it does show "The Port Forwarding entry of [xxx.xxx.x.xx] has been added or modified.".
My Firmware version is V100R001C01B036SP03_L_B. Last updated 19/05/13.
I have no firewall on my pc and the one enabled on the router is set to default but have also tried disabling it. Have tried enabling DMZ as suggested in various places with no luck and have tried changing UPnP settings again with no luck.
So if anybody has any suggestions I am all ears because this is bugging me so much as there are a few applications and games that require port forwarding and are pretty useless without it really.
Thank you.

If you follow the instructions on this page, it should work. Please see note about CG-NAT.
Port forwarding problems
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Port forwarding no longer working

Similar Messages

Maybe you are looking for