Port forwarding RV016
Hello to all cisco experts!!
Hi guys im new here, I need ur help, I've got a Cisco small business router RV016. At first I have no problem in port forwarding because our first ISP install with simply DSL broadband modem, for some issue on our first ISP, our company acquire a new DSL connection on a different ISP. My problem now is our second ISP install to us a DSL modem with 4 ports built-in router so how can I forward a port for our Remote Desktop Connection (RDP) in our Cisco RV016 while the Public IP address is in the Second ISP router. I know I can use the port forwarding feature on our Second ISP router, but I would like to use the port forwarding in our Cisco RV016 because we also use the the VPN client access feature in our Cisco RV016.
Is there a way to solve my problem guys? I highly appreciate all your helps, thanks in advance.
Ricardo Trupa
Ricardo,
My name is Ismael. Iam with Small Business Support center and do appreciate you reaching out to us. From what you have described to us is that you having issue with port forwarding with RDP (3389). I am also understanding that you have a Modem/router combo from ISP and then the RV016.
For port forwarding to work, you need two rules one on your modem/router and one on your RV016 . So its source ip address will be the LAN of this modem and destination is WAN ip address of the RV180. Another rule is then configured on RV180 WAN pointing to LAN of the internal device you trying to reach. So its source ip will be the WAN on RV016 and destination will be LAN ip address of the internal device you trying to reach. This type of double port forwards can be complex and unstable. So if your network allows for configuration changes then you modem can be set to bridge mode, to simplify things and have them working for you all the time.
The single port forward can still be done, but it would require for your ISP to fully bridge your Modem. This will allow for RV016 to receive a public ip on WAN1. Once bridged only one rule is required on your RV016. Hope this helps you.
Similar Messages
-
Port Forwarding with Port Translation RV042, RV016, RV082
This is a feature request for the Linksys RV series Routers. Currently, it appears that the Cisco/Linksys RV042, RV082, and RV016 only support port forwarding and 1-to-1 Nat. One item that I find very helpful with customers is port forwarding with port translation. I am requesting that this feature be included with a future firmware relase for these RV series routers.
Here is an example of the request.
Take an incoming service request on a TCP or UDP destination port and forward it to an internal IP on a different TCP or UDP port. For example, customer A wants to allow different machines on the internal network to receive Windows RDP connections inbound. To make PC maintenance identical between the internal machines, the customer does not want to change the listening port for RDP on the individual PC workstations through the Windows Registry. The customer also does not want to dedicate separate IP's to each machine in a 1-to-1 NAT setup. The only option is to have remote connections to each of these PC's to use a different destination port. So, for example, PC one could be reached on TCP port 5151, PC two on TCP port 5152, and PC three on port 5153. This requres a firewall that is able to translate each of these connection requests to a different internal IP on the default RDP port (TCP 3389). So, the following setup is required:
Port Forwarding with Port Translation:
Router External IP on TCP port 5151 ---> forwarded to PC One's internal IP on TCP 3389
Router External IP on TCP port 5152 ---> forwarded to PC Two's internal IP on TCP 3389
Router External IP on TCP port 5153 ---> forwarded to PC Three's internal IP on TCP 3389
There are several comparable "small business" class router competitors to the RV042, RV082, and RV016 that will perform this port forwarding with port translation process without incident. Unfortunately, these Cisco/Linksys small business routers will not accomplish this task currently.
Please implement this feature in a future firmware release.
Thanks!Excellent. I see this now. None of our customers actually use the UPNP feature, so we never realized that Port Forwarding with Port Translation features existed on this page along with the ability to enable or disable UPNP.
Perhaps, in the future, this functionality could be moved to and incorporated into the port forwarding page which seems to be a more logical location.
In either case I'm very happy to know that this feature is available on the RV's.
Thanks for your assistance. -
RV016 Wired 16 Port Cisco Router Port Forwarding Functions
Thank you for your time. I have created and attached a Word Document discussing the Cisco Model RV016 16 port wired Router port forwarding functions for your review. I would appreciate your time in reviewing it with your comments and suggestions.
Thank you very much,
Eddie LeFiles
850-471-1271Thank you for your time. I have created and attached a Word Document discussing the Cisco Model RV016 16 port wired Router port forwarding functions for your review. I would appreciate your time in reviewing it with your comments and suggestions.
Thank you very much,
Eddie LeFiles
850-471-1271 -
RV016 port forwarding by WAN port?
Hi,
I am replacing an ancient SOHO 90 series router with our new RV016, I was told this thing would do everything we needed which I didn't doubt, however, I am wondering if I made the wrong choice now. We have 5 IP's on one line coming into the current router, that isn't an issue, if needed I can make 5 seperate drops with each IP, but, now we have several servers hosting services on the same ports. For example 5.2 host a web server which is called to by the .250 address, 5.3 has one as well from .251, we have one on each of the 5, there are other servers too though on each of the 5 using the same ports. When I go to port forwarding the only option is to forward the single port to a single server, can I not forward ports from each WAN connection to a different server? Any help would be appreciated.
Here is a short sample from the old soho of what I want to do
ip nat inside source static tcp 192.168.5.5 443 *.*.*.250 443 extendable
ip nat inside source static tcp 192.168.5.6 443 *.*.*.251 443 extendable
ip nat inside source static tcp 192.168.5.5 80 *.*.*.250 80 extendable
ip nat inside source static tcp 192.168.5.6 80 *.*.*.251 80 extendable
ip nat inside source static tcp 192.168.5.22 80 *.252 80 extendable
ip nat inside source static tcp 192.168.5.22 443 *.252 443 extendable
ip nat inside source static tcp 192.168.5.96 6437 *.251 6437 extendable
ip nat inside source static tcp 192.168.5.96 6438 *.251 6438 extendable
ip nat inside source static tcp 192.168.5.96 6439 *.251 6439 extendable
ip nat inside source static tcp 192.168.5.93 7437 *.251 7437 extendable
ip nat inside source static tcp 192.168.5.93 7438 *.251 7438 extendable
ip nat inside source static tcp 192.168.5.93 7439 *.251 7439 extendable
ip nat inside source static tcp 192.168.5.101 8437 *.251 8437 extendable
ip nat inside source static tcp 192.168.5.101 8438 *.251 8438 extendable
ip nat inside source static tcp 192.168.5.101 8439 *.251 8439 extendable
ip nat inside source static tcp 192.168.5.90 9437 *.251 9437 extendable
ip nat inside source static tcp 192.168.5.90 9438 *.251 9438 extendableThe multi-WAN feature of RV016 is designed for redundancy and load balancing, so basic port forwarding is not tied to a specific WAN port. If a LAN server is exposed to the internet by the 1-to-1 NAT feature of RV016, the server can be accessed by a specified public IP address.
-
I have an RV016 router with 2 Fibre WAN connections on it. I have two internal servers with resources I need available externally.
I would like WAN1 to forward port 443 to server 1 and WAN2 to forward port 443 to server 2.
It does not appear this is possible as you do not have the option to select which WAN port you want the port forwarding for and can only forward ALL traffic on 443 to one internal server.
Does anyone know if this is possible or not?
ThanksHi Wbtadmin1,
You can use Port access translation which you can translate the port for example if you have two server listen in the same port such 443 , with port access translation you can choose an external port and internal port.
configuration :
Please follow this steps:
1. Please remove the rule of the port forwarding
2. Go to Setup under UPnP , service management and you will see external port and internal port so please configure external port to xxx and internal to 443 and click add, please do not enable UPnP
3. on the same page please choose the service you created and put the internal IP of the server A
4. for the second rule is the same just change teh external port to yyy and in internal 443 and put the second server B as internal IP
if you want to access to server A : publicIP:external port xxx
if you want to access to server B : publicIP:external port yyy
Now we want to restrict Client to access to server A from WAN 2 and allow only from WAN1
Under Firewall -- Access Rules
- Allow service (you can create custom service for external port xxx) from WAN1 to Server A
- seconds Access rules Deny Service (custom service xxx) from WAN 2 to Server A
- The same for server B
N.B : for Protocol Binding is working from LAN to WAN it means if you want to force Server A to communicate outside through WAN 1 or WAN 2
Please rate the post or mark it as answered to help other Cisco customers
Thanks
Mehdi -
Hi,
i have a little problem with the configuration of my rvs 4000 router;
1 - I have purchased 8 static ip address with my adsl contract, from 213.136.137.234 to 213.136.137.241
2 - wan settings of my rvs4000 are like below:
Connection Type:
Static IP
Interface:
Up
IP Address:
213.136.137.234
Subnet Mask:
255.255.255.248
Default Gateway:
213.136.137.233
DNS1:
62.94.0.41
DNS2:
62.94.0.42
3 - now my problem; i have already configured several port fowarding using "single port forwarding" function of my router but with this metho i can only forward internet request arriving to 213.136.137.234. How can i do port forwarding for my other ip addresses?
Thank youWith this router, you will not be able to port forward to those public ip addresses. This router does not support that function. What you would need is one of our rv series routers, like the rv042, rv082, or the rv016. With these devices you can do what is called one to one nat and reference a public address to a private address behind the firewall. The rvs4000 router does not have that function.
-
RV042 - Port forward/translation from ext to int
Hy,
I recently buy a CSRV042-EU. I need to make a translation port to acces remote some of my server on lan.
I use a primary WAN with static IP 83.166.XXX.XXX .The LAN has aprox. 30 clients.
I want to acces remote one of the computer from LAN, as example:
83.166.xxx.xxx:10101 -> 192.168.10.10, using 10101 as external port and 3389 as internal port for remote on 192.168.10.10 machine
83.166.xxx.xxx:10102 -> 192.168.10.11, using 10102 as external port and 3389 as internal port for remote on 192.168.10.11 machine
I don't konw how to do this forward because in Port Forward i cannot find the option to enter teh ext port and the int port.
Could you please help me with an example, how ca i make this forward?
Thank you !I know it's been this long post, but I have the following question ...
I have several external IPs and would like to designate for each type of service.
eg:
200.0.0.1 => http => 10.0.0.2
200.0.0.2 => https => 10.0.0.1
How could this setting in RV?
Today I have two models in the network-to-VPN Gw Gw the RV016 and 042.
Regards, -
Port Forwarding for RDP 3389 is not working
Hi,
I am having trouble getting rdp (port 3389) to forward to my server (10.20.30.20). I have made sure it is not an issue with the servers firewall, its just the cisco. I highlighted in red to what i thought I need in my config to get this to work. I have removed the last 2 octets of the public IP info for security .Here is the configuration below:
TAMSATR1#show run
Building configuration...
Current configuration : 11082 bytes
version 15.2
no service pad
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
hostname TAMSATR1
boot-start-marker
boot system flash:/c880data-universalk9-mz.152-1.T.bin
boot-end-marker
logging count
logging buffered 16384
enable secret
aaa new-model
aaa authentication login default local
aaa authentication login ipsec-vpn local
aaa authentication login ciscocp_vpn_xauth_ml_1 local
aaa authorization console
aaa authorization exec default local
aaa authorization network groupauthor local
aaa session-id common
memory-size iomem 10
clock timezone CST -6 0
clock summer-time CDT recurring
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1879941380
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1879941380
revocation-check none
rsakeypair TP-self-signed-1879941380
crypto pki certificate chain TP-self-signed-1879941380
certificate self-signed 01
3082024B 308201B4 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 31383739 39343133 3830301E 170D3131 30393136 31393035
32305A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 38373939
34313338 3030819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
8100BD7E 754A0A89 33AFD729 7035E8E1 C29A6806 04A31923 5AE2D53E 9181F76C
ED17D130 FC9B5767 6FD1F58B 87B3A96D FA74E919 8A87376A FF38A712 BD88DB31
88042B9C CCA8F3A6 39DC2448 CD749FC7 08805AF6 D3CDFFCB 1FE8B9A5 5466B2A4
E5DFA69E 636B83E4 3A2C02F9 D806A277 E6379EB8 76186B69 EA94D657 70E25B03
542D0203 010001A3 73307130 0F060355 1D130101 FF040530 030101FF 301E0603
ip dhcp excluded-address 10.20.30.1 10.20.30.99
ip dhcp excluded-address 10.20.30.201 10.20.30.254
ip dhcp excluded-address 10.20.30.250
ip dhcp pool tamDHCPpool
import all
network 10.20.30.0 255.255.255.0
default-router 10.20.30.1
domain-name domain.com
dns-server 10.20.30.20 8.8.8.8
ip domain name domain.com
ip name-server 10.20.30.20
ip cef
no ipv6 cef
license udi pid CISCO881W-GN-A-K9 sn
crypto vpn anyconnect flash:/webvpn/anyconnect-dart-win-2.5.3054-k9.pkg sequence 1
ip tftp source-interface Vlan1
class-map type inspect match-all CCP_SSLVPN
match access-group name CCP_IP
policy-map type inspect ccp-sslvpn-pol
class type inspect CCP_SSLVPN
pass
zone security sslvpn-zone
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 2
crypto isakmp policy 20
encr aes 192
authentication pre-share
group 2
crypto isakmp key password
crypto isakmp client configuration group ipsec-ra
key password
dns 10.20.30.20
domain tamgmt.com
pool sat-ipsec-vpn-pool
netmask 255.255.255.0
crypto ipsec transform-set ipsec-ra esp-aes esp-sha-hmac
crypto ipsec transform-set TSET esp-aes esp-sha-hmac
crypto ipsec profile VTI
set security-association replay window-size 512
set transform-set TSET
crypto dynamic-map dynmap 10
set transform-set ipsec-ra
reverse-route
crypto map clientmap client authentication list ipsec-vpn
crypto map clientmap isakmp authorization list groupauthor
crypto map clientmap client configuration address respond
crypto map clientmap 10 ipsec-isakmp dynamic dynmap
interface Loopback0
ip address 10.20.250.1 255.255.255.252
ip nat inside
ip virtual-reassembly in
interface Tunnel0
description To AUS
ip address 192.168.10.1 255.255.255.252
load-interval 30
tunnel source
tunnel mode ipsec ipv4
tunnel destination
tunnel protection ipsec profile VTI
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface FastEthernet4
ip address 1.2.3.4
ip access-group INTERNET_IN in
ip access-group INTERNET_OUT out
ip nat outside
ip virtual-reassembly in
no ip route-cache cef
ip route-cache policy
ip policy route-map IPSEC-RA-ROUTE-MAP
duplex auto
speed auto
crypto map clientmap
interface Virtual-Template1
ip unnumbered Vlan1
zone-member security sslvpn-zone
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport mode trunk
no ip address
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.20.30.1 255.255.255.0
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
ip local pool sat-ipsec-vpn-pool 10.20.30.209 10.20.30.239
ip default-gateway 71.41.20.129
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list ACL-POLICY-NAT interface FastEthernet4 overload
ip nat inside source static tcp 10.20.30.20 3389 interface FastEthernet4 3389
ip nat inside source static 10.20.30.20 (public ip)
ip route 0.0.0.0 0.0.0.0 public ip
ip route 10.20.40.0 255.255.255.0 192.168.10.2 name AUS_LAN
ip access-list extended ACL-POLICY-NAT
deny ip 10.0.0.0 0.255.255.255 10.20.30.208 0.0.0.15
deny ip 172.16.0.0 0.15.255.255 10.20.30.208 0.0.0.15
deny ip 192.168.0.0 0.0.255.255 10.20.30.208 0.0.0.15
permit ip 10.20.30.0 0.0.0.255 any
permit ip 10.20.31.208 0.0.0.15 any
ip access-list extended CCP_IP
remark CCP_ACL Category=128
permit ip any any
ip access-list extended INTERNET_IN
permit icmp any any echo
permit icmp any any echo-reply
permit icmp any any unreachable
permit icmp any any time-exceeded
permit esp host 24.153. host 66.196
permit udp host 24.153 host 71.41.eq isakmp
permit tcp host 70.123. host 71.41 eq 22
permit tcp host 72.177. host 71.41 eq 22
permit tcp host 70.123. host 71.41. eq 22
permit tcp any host 71..134 eq 443
permit tcp host 70.123. host 71.41 eq 443
permit tcp host 72.177. host 71.41. eq 443
permit udp host 198.82. host 71.41 eq ntp
permit udp any host 71.41. eq isakmp
permit udp any host 71.41eq non500-isakmp
permit tcp host 192.223. host 71.41. eq 4022
permit tcp host 155.199. host 71.41 eq 4022
permit tcp host 155.199. host 71.41. eq 4022
permit udp host 192.223. host 71.41. eq 4022
permit udp host 155.199. host 71.41. eq 4022
permit udp host 155.199. host 71.41. eq 4022
permit tcp any host 10.20.30.20 eq 3389
evaluate INTERNET_REFLECTED
deny ip any any
ip access-list extended INTERNET_OUT
permit ip any any reflect INTERNET_REFLECTED timeout 300
ip access-list extended IPSEC-RA-ROUTE-MAP
deny ip 10.20.30.208 0.0.0.15 10.0.0.0 0.255.255.255
deny ip 10.20.30.224 0.0.0.15 10.0.0.0 0.255.255.255
deny ip 10.20.30.208 0.0.0.15 172.16.0.0 0.15.255.255
deny ip 10.20.30.224 0.0.0.15 172.16.0.0 0.15.255.255
deny ip 10.20.30.208 0.0.0.15 192.168.0.0 0.0.255.255
deny ip 10.20.30.224 0.0.0.15 192.168.0.0 0.0.255.255
permit ip 10.20.30.208 0.0.0.15 any
deny ip any any
access-list 23 permit 70.123.
access-list 23 permit 10.20.30.0 0.0.0.255
access-list 24 permit 72.177.
no cdp run
route-map IPSEC-RA-ROUTE-MAP permit 10
match ip address IPSEC-RA-ROUTE-MAP
set ip next-hop 10.20.250.2
banner motd ^C
UNAUTHORIZED ACCESS TO THIS NETWORK DEVICE IS PROHIBITED.
You must have explicit permission to access or configure this device. All activities performed on this device are logged and violations of this policy may result in disciplinary and/or legal action.
^C
line con 0
logging synchronous
line aux 0
line 2
no activation-character
no exec
transport preferred none
transport input all
line vty 0
access-class 23 in
privilege level 15
logging synchronous
transport input telnet ssh
line vty 1 4
access-class 23 in
exec-timeout 5 0
privilege level 15
logging synchronous
transport input telnet ssh
scheduler max-task-time 5000
ntp server 198.82.1.201
webvpn gateway gateway_1
ip address 71.41. port 443
http-redirect port 80
ssl encryption rc4-md5
ssl trustpoint TP-self-signed-1879941380
inservice
webvpn context TAM-SSL-VPN
title "title"
logo file titleist_logo.jpg
secondary-color white
title-color #CCCC66
text-color black
login-message "RESTRICTED ACCESS"
policy group policy_1
functions svc-enabled
svc address-pool "sat-ipsec-vpn-pool"
svc default-domain "domain.com"
svc keep-client-installed
svc split dns "domain.com"
svc split include 10.0.0.0 255.0.0.0
svc split include 192.168.0.0 255.255.0.0
svc split include 172.16.0.0 255.240.0.0
svc dns-server primary 10.20.30.20
svc dns-server secondary 66.196.216.10
default-group-policy policy_1
aaa authentication list ciscocp_vpn_xauth_ml_1
gateway gateway_1
ssl authenticate verify all
inservice
endHi,
I didnt see anything marked with red in the above? (Atleast when I was reading)
I have not really had to deal with Routers at all since we all access control and NAT with firewalls.
But to me it seems you have allowed the traffic to the actual IP address of the internal server rather than the public IP NAT IP address which in this case seems to be configured to use your FastEthernet4 interfaces public IP address.
There also seems to be a Static NAT configured for the same internal host so I am wondering why the Static PAT (Port Forward) is used?
- Jouni -
ASA 5505 how to create a port forwarding rule
ASA 5505 IOS ver 9.2.3
I need to create a firewall rule that will allow internal services to be accessed externally, but using port forwarding. For example I'd like to enable access to our NAS via ftp external on port 1545 and then have the ASA forward the request to the NAS internally on port 21.
I tried these commands but they didn't work:
object network NAS
host 192.168.2.8
nat (inside,outside) static interface service tcp 21 1545
access-list NASFTP-in permit tcp any object NAS eq 1545
conf t
int vlan 2
access-group NASFTP-in permit tcp any object NAS eq 1545
I really appreciate the help everyone.try this, it worked for me, here is an example of adding a webserver with a ip of 10.10.50.60 and naming it with a object named www-server and forwarding port 80 , the way it works is you need to do three things, u need to "nat it" "foward it" and allow it in "acl"
object network obj-10.10.50.60-1
host 10.10.50.60
nat (inside,outside) static interface service tcp 80 80
object network INSIDE
nat (inside,outside) dynamic interface
object network WWW-SERVER
nat (inside,outside) static interface service tcp 80 80
access-list Outside_access_in extended permit tcp any object WWW-SERVER eq 80
access-group Outside_access_in in interface Outside -
Cisco 5520 ASA Port Forward to Endian Firewall VPN Question
Hello,
We have had a VPN operational on our Endian Firewall which uses OpenVPN server on port number 1194. We recently purchased a Cisco 5520 ASA to put in front of our Endian Firewall and I am still hoping to use our current Endian Firewall VPN server. So I am thinking the easiest way to make this happen is to port forward all vpn traffic through the ASA to our Endian Firewall to access the VPN. Anyhow, I am just hoping someone with higher knowledge can let me know if this is the best course of action or if there is another easier or more efficient way of doing this?
Thanks for your comments in advance I am new to cisco technology,
JoeWrong forum, post in "Secuirity - Firewalling". You can move your posting with the Actions panel on the right.
-
Hello,
i have a problem with a single port forward with 9.2 ASA (5505). Here is the related config.:
access-list outside_access_in extended permit icmp any any
access-list outside_access_in extended permit tcp any host 10.168.50.5 eq www log
access-list DMZ_in extended permit ip any any
nat (DMZ,outside) source dynamic obj_any interface
nat (DMZ,outside) source static any any destination static VPN_Pool VPN_Pool no-proxy-arp route-lookup
nat (outside,DMZ) source dynamic any interface destination static Public_Server Public_Server service HTTP HTTP
object network Public_Server
nat (DMZ,outside) static interface service tcp www www
access-group outside_access_in in interface outside
access-group DMZ_access_in in interface DMZ
When i try to access the server, the console said ACL drops. The packet tracer said that it dropped in the implicit deny rule. Can you help me what can be the problem?
Thank You!Yes, of course, i can ping, and also from VPN. And also the web service works from VPN, local. Tha packet-tracer said the same, the implicit deny catch it.:
packet-tracer input outside tcp 8.8.8.8 http OUTIFIP http det
Phase: 1
Type: ACCESS-LIST
Subtype:
Result: ALLOW
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0xad2a1718, priority=1, domain=permit, deny=false
hits=89868, user_data=0x0, cs_id=0x0, l3_type=0x8
src mac=0000.0000.0000, mask=0000.0000.0000
dst mac=0000.0000.0000, mask=0100.0000.0000
input_ifc=outside, output_ifc=any
Phase: 2
Type: ROUTE-LOOKUP
Subtype: Resolve Egress Interface
Result: ALLOW
Config:
Additional Information:
in OUTIFIP 255.255.255.255 identity
Phase: 3
Type: NAT
Subtype: per-session
Result: ALLOW
Config:
Additional Information:
Forward Flow based lookup yields rule:
in id=0xad071248, priority=1, domain=nat-per-session, deny=true
hits=1199, user_data=0x0, cs_id=0x0, reverse, use_real_addr, flags=0x0, protocol=6
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
input_ifc=any, output_ifc=any
Phase: 4
Type: ACCESS-LIST
Subtype:
Result: DROP
Config:
Implicit Rule
Additional Information:
Forward Flow based lookup yields rule:
in id=0xad2a23b8, priority=0, domain=permit, deny=true
hits=883, user_data=0x9, cs_id=0x0, use_real_addr, flags=0x1000, protocol=0
src ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0
dst ip/id=0.0.0.0, mask=0.0.0.0, port=0, tag=0, dscp=0x0
input_ifc=outside, output_ifc=any
Result:
input-interface: outside
input-status: up
input-line-status: up
output-interface: NP Identity Ifc
output-status: up
output-line-status: up
Action: drop
Drop-reason: (acl-drop) Flow is denied by configured rule -
HELP!! asa 5505 8.4(5) problem with port forwarding-smtp
Hi I am having a big problem with port forwarding on my asa. I am trying to forward smtp through the asa to my mail server.
my mail server ip is 10.0.0.2 and my outside interface is 80.80.80.80 , the ASA is setup with pppoe (I get internet access no problem and that seems fine)
When I run a trace i get "(ACL-Drop) - flow is deied by configured rule"
below is my config file , any help would be appreciated
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISPDsl
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_SMTP
host 10.0.0.2
access-list outside_access_in extended permit tcp any object server_SMTP eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network server_SMTP
nat (inside,outside) static interface service tcp smtp smtp
nat (inside,outside) after-auto source dynamic any interface
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:c5570d7ddffd46c528a76e515e65f366
: endHi Jennifer
I have removed that nat line as suggested but still no joy.
here is my current config
Result of the command: "show running-config"
: Saved
ASA Version 8.4(5)
hostname ciscoasa
domain-name domain.local
enable password mXa5sNUu4rCZ.t5y encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
interface Ethernet0/0
switchport access vlan 2
interface Ethernet0/1
interface Ethernet0/2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan1
nameif inside
security-level 100
ip address 10.0.0.1 255.255.255.0
interface Vlan2
nameif outside
security-level 0
pppoe client vpdn group ISP
ip address 80.80.80.80 255.255.255.255 pppoe setroute
ftp mode passive
dns server-group DefaultDNS
domain-name domain.local
same-security-traffic permit intra-interface
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network Server_Mail
host 10.0.0.2
access-list outside_access_in extended permit tcp any object Server_Mail eq smtp
pager lines 24
logging asdm informational
mtu inside 1500
mtu outside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
no arp permit-nonconnected
object network obj_any
nat (inside,outside) dynamic interface
object network Server_Mail
nat (inside,outside) static interface service tcp smtp smtp
access-group outside_access_in in interface outside
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 10.0.0.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
telnet timeout 5
ssh timeout 5
ssh key-exchange group dh-group1-sha1
console timeout 0
vpdn group ISP request dialout pppoe
vpdn group ISP localname [email protected]
vpdn group ISP ppp authentication chap
vpdn username [email protected] password *****
dhcpd auto_config outside
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
class-map inspection_default
match default-inspection-traffic
policy-map type inspect dns preset_dns_map
parameters
message-length maximum client auto
message-length maximum 512
policy-map global_policy
class inspection_default
inspect dns preset_dns_map
inspect ftp
inspect h323 h225
inspect h323 ras
inspect rsh
inspect rtsp
inspect esmtp
inspect sqlnet
inspect skinny
inspect sunrpc
inspect xdmcp
inspect sip
inspect netbios
inspect tftp
inspect ip-options
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:f3bd954d1f9499595aab4f9da8c15795
: end
also here is the packet trace
and my acl
Thanks -
I am trying to setup port forwarding
I am trying to setup port forwarding for a mfi 5510l hotspot. I have made the changes on the hotspot but the hotspot doen't respond when tested. Can anyone help?
If you examine the About section of the Jetpack’s web style user interface, you should find that it has a reserved IP4 IP address. That means your Jetpack doesn’t connect directly to the public internet, your Jetpack is connected to Verizon’s private network. Your port forwarding has no affect on Verizon’s private network.
The standard recommendation is:
Purchase a public facing static IP address from Verizon for a one time fee of $500.
Use a VPN to go around the issue.
Use another ISP that provides a static IP address. -
Trying to Port Forward Airport Extreme 802.11ac using Airpot Utility 6.3.2
Hello kind experts. I am finally getting around to replacing my old BEFSR81 Cisco Router with an old Time Capsule attached with the Airport Extreme 802.11ac. The BEFSR81 also had 8 ports, so I have 8 hardwired locations throughout the house. I have a couple of IP cameras for which it was easy to port forward on the Cisco (just click on the port range forwarding tab, type the start/end ranges (which are identical) and the assigned IP address). Everything has been working well for years. Here's what I wish to do with the new setup: Cable Modem -> Airport Extreme -> Dumb gigaport switch with the hardwires connected to it.
When I go to Airport Utility (6.3.2) -> Network Tab -> Port Settings -> "+", the following comes up:
Firewall Entry Type (Defaulted to IPv4 Port Mapping)
Description (5 pull down choices)
Public UDP Ports : _________
Public TCP Ports: __________
Private IP Address (I take it that is where I enter the IP address for each camera, e.g. 192.168.1.xxx)?
Private UDP Ports: __________
Private TCP Ports: __________
I am obviously not a technophile, especially when it comes to networking, but was able to create my old setup.
Any advice on whether or not my configuration is appropriate and what exactly I need to put in the port fields would be greatly appreciated!
Thanks in advance!To successfully access an IP camera on the local network from the Internet, the following basics need to be taken care of:
Install the camera(s) and verify that you can access them from the local network.
Configure port mapping/forwarding on your router. Typically, IP cameras require at least two ports: 1) A web port for administering the camera; Usually TCP port 80, and 2) A streaming port to broadcast the camera video feed; Usually UDP port 9000. Note: You should check with your camera's documentation for the exact ports required.
If the camera is attached to a computer, you will need to configure the computer's firewall to open the same ports as in step 2 above.
Verify that your modem is in bridge mode, i.e., if the modem provides NAT & DHCP services, turn them off.
Test your network. Use CheckIP to determine your router's current WAN-side (public) IP address. Then, from a remote location (not from a computer on the local network), use the DynDNS Open Port Tool to verify that the required ports are open. Success is an "Open" response from the Tool.
Check out the following AirPort User tip for configuring port mapping on an AirPort base station. -
Port forwarding difficult to set up, or doesn't wo...
Hello, I have a BT Home Hub 5 and needed to forward the ports for a couple of programs i use. Terefore i went on 192.168.254 to set up the forwarding of the ports.
Before that set up a static Ip in the router in the classic way (cmd - ipconfig all - copied all the addresses), then i selected in the programs list the program i needed to have (was already in the list so no need to dd a new one) but has been useless. Everything seems nice, but simply it doesn't work. It worked only once, then the day later came back as before.
Anyone can give me an hand? I read somewhere that this procedure in the router page has some bugs.
Thank you very much
Solved!
Go to Solution.mrblue wrote:
It worked now!! I made a mistake before, i enabled the "use this ip address" but then i should have connect the new game NOT to my pc but to the user defined ip! That was the static one defined before in my pc
Thank you keith
Exactly !
Device names will normally fail, that seems to be a common "feature" of all the home hubs, and most other routers expect you to use the device IP that you have reserved in the DHCP table, or set as a static IP address, outside of the DHCP range. It could be a leftover from the "SpeedTouch" code that seems to underpins the core of all the home hubs, starting from the home hub 1, which I have.
This is where most people seem to fail, when it comes to port forwarding on the home hub.
Sometimes you can get away with it and it will appear to work for a while, but then it fails. I hear so many people complaining on this forum that it does not work, which is why I put together my guides, based on my own experience, and other forum users.
If you have set an IP address on your PC, outside of the DHCP range, then the option "always use this IP address" is not relevant, and could cause problems.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.
Maybe you are looking for
-
Where ODBC Connector is defined in Windows registry?
Good day! I have an app which use ODBC Connector, and it don't works as well. When I trying to access ODBC programmatically, I get an error from ODBC Driver Manager, smth like: " Data source not found and no driver specified, the default " (my OS lan
-
How to set up email in RAID Admin?
Using RAID Admin 1.5.1, I need to know how to set up the it up for automatic email notification. Okay I got as far as clicking the Email icon adding my .mac address. Now what do I put under SMTP. It's asking for the "server" and the "from email addre
-
Facing problem with FB 4 beta 2 and blazeDS
i started create a simple flash builder project with blazeDS, but after i tried many times also can't communicated with java beans, even how i tried also can't get through it, i always get the alert message about "send failed", what's going on with m
-
Trouble downloading Cinema 4d Lite update.
Can't download update for 2 days. Maxon says come back later. Updates from Adobe work fine during same time period.
-
Why does Nokia Store ENFORCE download to phone onl...
I have noticed that every app I buy has the "download" option blocked. The only way to get it is to give your mobile #, pick up the SMS, go the the link in the SMS, and download the app directly to the phone. Why are they doing this? Is it to prevent