Port Forwarding with Airport Express 802.11n Utility version 6.1

Hi all,
Quick question, hoping it can be solved with a quick answer
Not sure what I'm doing wrong: I'd like to set up port forwarding for Skype and Transmission, however in the airport utility even when I assign the public/private ports to the ones specified in the respective programs (with the IP address for the machine I am using), if I go into Transmission or onto a port checker website the connections are shown as closed for the ports I have selected (on the public side).
I've made a DHCP reservation for this machine to tie it to a given IP address, and I've enabled NAT port forwarding protocol in the Network options (no default host so far).
Also, in case it makes a big difference, right now I'm connecting to the internet via a Cisco DCP3825 cable modem running in bridge mode, with the AEBS in DHCP and NAT router modes.
Any tips?
Thanks!

Sadly I never got it to work. I called up Apple and they claimed that all the ports are open for the Airport Express, but if I run port scanner in Network Utilities none of the ports I specify show up as open unless I select one of the "Default" port categories like "Windows File Sharing". I told this to the person I spoke to on the phone, and they replied several times in a row that they are not allowed to help set up port forwarding, that they can only provide info on how to open the ports, and that even if the ports are subsequently not opened or forwarded they can't provide any assistance. It wasn't a very good conversation. Unfortunately, based on some of the other disucssions I've looked at in this forum, it doesn't seem possible to do conventional custom port forwarding using this version of the Airport Utility. Hopefully someone will correct me though. Sorry I can't be more help.

Similar Messages

Does airport extreme 802.11a/c work with airport express 802.11n

does airport extreme 802.11a/c work with airport express 802.11n

"You can use the AirPort Express to extend the signal provided by the new AirPort, but the Express will not extend "ac" wireless since it does not have that capability. The Express will extend an "n" wireless signal if that helps."
This is what I am trying to understand.
So AXTRM w/ sep SSID for 2.4 (b/g/n) - call it SSID1 - and 5GHz (ac) call it SSID2 - WiFi Explorer confirms AC mode on 5G.
Using an AXPRESS to extend - I have the option of SSID1 b/g/n *and* the 5GHz ac SSID2 in the pulldown (it sees both?) --> if I select SSID1, it also extends this same SSID in 5GHz (both showing b/g/n) >> so I now have 3 signals on SSID1 (XTRM 2.4G, XPRS 2.4G and XPRS 5G) b/g/n and one signal on SSID2 (XTRM 5G AC) ac
If I select the 5Ghz ac SSID2 to extend - it prompts me "do you also want to extend (the 2.4GHz SSID1)?" --> select yes and I now have 2 signals for SSID (XTRM 2.4G & XPRS 2.4G) b/g/n and 2 signals on SSID2 (XTRM 5G 802.11ac & XPRS 5G 802.11 a//n)
Is the 5G SSID2 actually being extended from the Airport Extreme to the Express?
The reason I bring this up is I am having a lot of issues since iOS8 came out (especially on iPhone 6). Everything I am reading is pointing to when people have 2 AP's set to use the same SSID. When you walk to a part of the house where 5G 802.11 ac signal marginalizes, the phone does not immediately hand over to the 5G 802.11 a/n Airport Express.
My thought was separate the SSID's but to me, if the Express can't extend 5Ghz from the Extreme, it's taking a step backwards. I am better off getting a more powerful router like an ASUS and going with one AP, drop the WiFi roaming altogether
Any thoughts?

Extending range of Linksys WRT310N router with Airport Express 802.11n

I am trying to extend the range of an existing wireless network set up with a WRT310N router with an Airport Express 802.11n - I've tried choosing both "Participate in a WDS network" and "Extend a wireless network" and both have run into problems.
Any advice would be greatly appreciated!
Thanks, Amy

amysinsh, Welcome to the discussion area!
Sorry but this is not possible.
It would be possible if the wireless network was created by another AirPort Express (AX), anAirPort Extreme base station (AEBS), or a Time Capsule.

Airport Extreme 802.11g with Airport Express 802.11n Aiport Express

I have An Airport Extreme Base Station 11g and an airport express 11g and I needed to buy another Airport Express but this one is 11n and my Airport Utility does not see it. Are these new Airport Express backward compatible? The reason is the kids X-box needs the ethernet jack that the color printer uses.
Can anyone help?
Thanks!

Thank you!
I followed your advice but so far I have been able to make some progress. I went out and bought the Airport Extreme 802.11n as I needed a router too so I like the features on the new one. So I think I have made a complex situation worse, LOL.
So far, the new airport utility can only see the new & old Airport Extreme but cant see the Express-g or express-n airports as they continue to blink amber.
What do I am I doing wrong?
thx

Numerous problems with Airport Express 802.11n with DSL and extending WLAN

Hi all,
I have the following hardware:
802.11b/g Airport Express with firmware 6.3
802.11n Airport Express with firmware 7.3.2
MacBook Pro
iBook G4
Mac Pro PowerMac 2x450 G4
Up until now I had been using the old Airport Express as the base station connecting to my PPPoE DSL line, and it worked fine. I wanted to extend the range of this network, and got another newer Airport Express, the 802.11n model.
First I tried to use the 802.11n to connect to the Internet and the old one to extend the network. Turns out the old one can't be used to extend a network, which is bad enough, but the 802.11n one refuses to connect via DSL for more than a couple minutes, then drops the Internet connection.
So I tried downgrading the firmware to 7.3.0 and 7.3.1, but it didn't help. Did a hard reset, factory default reset, soft reset, nothing worked.
Next I tried swapping the two, putting the old Express back on the DSL line and the new one as the bridge to extend the network (using WPA2). But the 802.11n complains that it can't access the network and flashes amber.
Again, tried upgrading to 7.3.2, downgrading to 7.3.1 and 7.3.0, hard reset, soft reset. Nothing works.
Any ideas?
Cheers,
Fairfax71

I don't see any option in the Airport Admin Utility for the old Express for creating a WDS network, only to participate in one...?
That is the option you want to choose.
You could use the newer AirPort Utility to configure the older AX.
Sorry, forgot to ask something else: The 802.11n Express is able to join the WLAN created by the 802.11b/g Express as a client, but not extend it, is that what you're saying?
No. If you join the network the AX is simply acting as another wireless client and is not extending the network. The "extend" option is not available since the older AX is not 802.11n capable. You must use WDS.
Use AirPort Utiity and follow these steps for both AX's. To set up the main AX:
Click the AirPort status menu in the menu bar and choose the wireless network created by the base station you want to set up as the main base station.
Open AirPort Utility (located in the Utilities folder in the Applications folder on a Mac, or in Start > All Programs > AirPort on a Windows computer). Select the main base station, and choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary. If the base station is using the default password of public, you will not be prompted for a password.
Click the Wireless button, and then choose “Participate in a WDS network” from the Wireless Mode pop-up menu.
Click WDS and then choose “WDS main” from the WDS Mode pop-up menu.
Select the “Allow wireless clients” checkbox if you want client computers to connect to this base station.
Click the Add button and enter the MAC address of the base stations you want to connect to this base station. If there is a base station listed that you’d like to remove from the list, select the base station and click the Delete (–) button.
Click Update to send the new settings to the base stations in the WDS. By default, the “Allow wireless clients” checkbox is selected. If you deselect the checkbox, and later want to change the settings on the base station, you must connect to the base station’s LAN port with an Ethernet cable. You will not be able to connect to the base station wirelessly.
To set up the second AX to connect to the main AX:
Open AirPort Utility. Select the AX, and choose Manual Setup from the Base Station menu. Enter the base station password, if necessary. If the base station is using the default password of public, you will not be prompted for a password.
Enter the same network password as the main base station, if necessary.
Click the AirPort button, and then click Wireless. Choose “Participate in a WDS network” from the Wireless Mode pop-up menu, and choose the same channel as the main base station from the Channel pop-up menu.
Click WDS and choose “WDS remote” from the pop-up menu.
Enter the MAC address of the main base station in the WDS Main field. The MAC address is also referred to as the AirPort ID and is printed on the label on the bottom of the base station.
Click Update to transfer the settings to the base station.
This can be found on page 42 of "Designing AirPort Networks Using AirPort Utility" (direct PDF download).

Advised to get an "extender" to be able to stream netflix, etc. through new digital tv. Apple store told me to buy Airport Express and set up WDS. Upon reading about WDS it stated cannot set up WDS with Airport Express 802.11n,

I was advised I needed an "extender" to stream Netflix, etc. through my newly purchased digital TV. Apple store advised me to buy Airport Express and choose WDS setting. When reading instructions on how to set up WDS it states cannot set up WDS with an 802.11n airport express, which is what they told me to purchase. How do I set up this Airport Express to extend my internet signal from my modem & airport to be able to stream internet capability to my TV?

I was advised I needed an "extender" to stream Netflix, etc. through my newly purchased digital TV. Apple store advised me to buy Airport Express and choose WDS setting. When reading instructions on how to set up WDS it states cannot set up WDS with an 802.11n airport express, which is what they told me to purchase. How do I set up this Airport Express to extend my internet signal from my modem & airport to be able to stream internet capability to my TV?

Sudden slow wifi connection with Airport Express 802.11n

Recently, all of a sudden I noticed the speed of my internet droped dramaticlly from ~27Mbps to ~4Mbps (Speedtest.com) Comcast's blast. When I connect my laptop directly to the modem there is no problem with the speed. I tried restarting the modem, changing the channel/radio mode on the airport express, hard reset the airport epress, change the location of the airport express but nothing has changed. I notice that the speed fluctuate on speedtest.com meaning it ranges from 1-3 to 5-7Mbps. I test the speed on three other laptops but still got the same result. The only change I can think of that could effect this is the addetion of two computers to the network but I would still get the same speed when they are powered off.
Thanks

willcyrier wrote:
Do I have to change anything on my computers?
you use +airport utility+ (AU) (in your applications > utilities folder). launch AU, double-click on the icon of your extreme to enter manual setup, and go to the wireless tab. see this screen shot
however, before you do, i recommend you download iStumbler (does not work with Snow Leopard) or AirRadar (it has a trial period) and note the channels other networks in your vicinity are broadcasting on. change the channel of your network as far away as possible from those.
good luck !

Extend Airport Extreme 802.11g with Airport Express 802.11n

I bought a new AE 802.11n and I want to extend my network from my old Airport Extreme 802.11g. I can't figure out how to do this.

Unfortunately, the newer "n" AirPorts and older "g" AirPorts are not compatible if you are trying to configure the AirPort Express to "extend a wireless network" using wireless only.
The "extend a wireless network" function and feature is only found on newer "n" AirPorts.
If you can connect the AirPort Express to the older AirPort Extreme using a permanent wired Ethernet connection, it is possible to configure the Express to provide more wireless coverage that way.
Using an older, very difficult setup called WDS, it might be possible to configure the Express using wireless only, but the end result would be a network that provides only half the speed of your older "g" AirPort Extreme, so this is definitely not recommended due to the severe performance drop that will occur on the network.

Extending a network with Airport Express 802.11n-2.4 or 5.0GHz?

I've just ordered an AirPort Express N to extend the network of my AirPort Extreme (Gigabit) and run AirTunes. It'll be connected to the router by Ethernet.
My question is this: can I run the Express at 2.4GHz (802.11b/g/n) while I run the Extreme at 5.0GHz (802.11n only), even though they're on the same network? I've got a couple of 802.11g machines (my old iBook and my iPhone, for two), so I need to keep backward-compatibility, but I'd love for the 802.11n machines (my iMac, and my wife's Mac Book) to connect at the higher speed. Can you extend a network on different frequencies?
Message was edited by: David Kudler

My question is this: can I run the Express at 2.4GHz (802.11b/g/n) while I run the Extreme at 5.0GHz (802.11n only), even though they're on the same network?
No, not while they are in a WDS. If you want to operate wireless networks in both radio bands, you would need to configure the base stations in a "dual band" network.
Setting up a "dual band" network is described in the Designing AirPort Networks document, starting on page 48.

PC causing interference with Airport Express 802.11n

Hi there,
My airport extreme base station is operating in WDS mode, with an Airport Express as a remote wds.
When i power on a Dell laptop in the house where the AEBS is, the wireless connectivity for any Macs or Pc's connected to the AEBS grinds to a halt. After a few seconds, the AEBS provides zero connectivity. When I turn the Dell's power off, the AEBS signal builds to where it was prior to the Dell being turned on, which is very strong.
The wireless antenna for the dell is not even powered on, and it is not connected to the AEBS via wire either.
Has anyone experienced this kind of interference with the AEBS? I would like to use this Dell on the AEBS network via wireless. Unfortunately, tossing the Dell out the window is not an option for me. Thanks!

Seems the Dell's docking station was interfering with the ABS. Strange.

Speed issue with WDS, Airport Extreme, and Airport Express 802.11n

I have a Airport network set up using WDS and two airport base stations: an Airport Extreme 802.11n, and an Airport Express 802.11n. The Extreme is configured to be WDS main and is connected to my cable modem and other computers, while the express is WDS relay and acts as a switch.
I don't actually have any wireless clients connecting to the express. I'm using it to connect a mac with no airport card to the network by plugging it into the ethernet port on the express. For the most part, it works, and the mac gets a network address and can access the network. However, the connection speed from the Express to the Extreme seems slower than it should be.
Since both are 802.11n, and the Mac is plugged into the Express's 10/100 ethernet port, I figure the theoretical top speed that the Mac should be able to communicate with another device plugged into the Extreme is at around the same speeds as 100 mbps ethernet, since the 100 mbps ethernet connection should be the bottleneck in this case. In reality, the speeds are much slower: when I transfer files between a machine connected to the extreme (via ethernet) and my mac, the speed tops out at about 2 megabytes a second, if that.
I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is! Also, the only wireless communication is between the Extreme and the Express, so one wireless device acting as a relay for another (and thus cutting the throughput in half) shouldn't be an issue.
Does anyone know why the speeds are so slow, and if there's anything I can do to improve them?

Hello Brian Kendall. Welcome to the Apple Discussions!
I looked in the Airport Extreme's logs, and it indicates that the Express is only connected at 54 mbps, as though it were a 802.11g Express. I have no idea why this is!
That is because you established a WDS which only runs in 802.11g. Since you have two 802.11n base station, you would want to take advantage of the "Extend a network" feature available with these base stations.
Here's a typical setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility.)

Speed issue with TC and Airport Express 802.11n in WDS mode...

Here is my problem.
I replaced my older base station / Express duo with
a new Time Capsule (1TB) and a new Airport Express (802.11n).
I set up the network with the TC as base station running a WDS network (WDS main) and the Express is the WDS remote.
When I check the wireless clients from the TC, I find my iMac running at 130Mbits and the Extreme at 54Mbits.
No other wireless clients are connected to the network (I kept my slower network as a parallel one for my "older" Macs).
The only other connected device is my Dish network DVR that is connected via an Ethernet cable directly to the Express.
So my question is why does the Express not communicate at >54 speed rate with the TC?
And, why does my iMac connect with 130 and not with 300Mbits?
Any thoughts?

Instead of using WDS, you should take advantage of the "Allow this network to be extended" option that is available for the 802.11n AirPorts including the TC. WDS only operates in the 802.11g radio mode.
Here's the basic setup:
o If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
o Open AirPort Utility and select the base station that will connect to the Internet.
o Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
o Click AirPort in the toolbar, and then click Wireless.
o Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then select the “Allow this network to be extended” checkbox.
o Next, select the base station that will extend this network, and choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
o Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then choose the network you want to extend from the Network Name pop-up menu.
o Enter the base station network and base station password is necessary.
o Click Update to update the base station with new network settings.
(ref: Page 46 of "Designing AirPort Networks Using AirPort Utility).

HT1998 what is the latest update for Airport Express 802.11n with the Mac OSX10.6.8

what is the latest update for Airport Express 802.11n with Mac OSX 10.6.8?

You can find out as follows:
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the AirPort Express
Click Manual Setup
Click directly on the word Version (3rd line)
If there are any updates, you will be notified.
If there are not any updates, you have already have the latest firmware.

Airport Express 802.11n not seen in utility scan

I have an Airport Express 802.11n and the Airport utility scan isn't seeing it. I've reset it back to factory and still not being seen. Help please

After a factory default reset, the AirPort Express is broadcasting a wireless network with a name like Apple Network xxxxxx.
If you are tying to configure the Express using wireless, you need to make sure that your Mac is logged on to this network first, before you open AirPort Utility.
It's also possible to connect an Ethernet cable from your Mac to the AirPort Express and then open AirPort Utility. Once the Express has been configured an updated, you can remove the Ethernet cable.

AirPort Utility doesn't support my version of AirPort Express 802.11n

I have OS X Yoesmite installed and now my AirPort Utility doesn't support the version of AirPort Express 802.11n . Any advice?

AirPort Utility 6.3.4 in Yosemite does support both versions of the 802.11n AirPort Express.
What is the model number of your AirPort Express? If you are not sure, look on the side or bottom of the Express. The model number starts with an "A" followed by four numbers.
Hard to see the model number.....you may need a magnifying glass and good lighting.

Port Forwarding with Airport Express 802.11n Utility version 6.1

Similar Messages

Maybe you are looking for