Port fowarding not working and Max Payne 3

I have had a proble with this game badly lagging and some things not being applied to my account while playing etc etc etc
Now the ports that I've already opened ( or seemingly not ) are :-
UDP 6672
UDP 27900
UDP 27901
443
I have put the Hub 3 ( 3A ) into DMZ, and when I go to an online port checking facility no matter which one it tells me that eaach of the ports are closed, and I'm still lagging in game etc
I'm not new to computers, just not done a lot of connection problems.I did the port forwarding via a BT tech rep over the phone, so there shouldn't be any problems with how it's been setup ( e.g me not putting in something should have been taken out of the equation ).
I've seen a few posts about the HH3a not doing as it should.So 2 questions here, can I ask/demand a HH3B, and is there the same problems with this as with the HH3A ?
If you have any other questions for me, be free to ask, but I might ask how to do some things
Andy

After 4 telephone conversations , it appears that either there is something wrong with the HH3 Type A , and port forwarding isn't happening , or the HH3 doesn't allow me to see if the port forwards are concerned, which isn't very helpful either way.
Added to which BT are unable to send me out a HH3 Type B because " they are undergoing testing at the moment, because there is a problem with them " , quote , unquote.It has taken these 4 phone calls to find this out, which could've been explained the first time, instead of just fobbing me off, saying the port fowards are done, when clearly as far as online open port checkers are concerned, their not.
So, there isn't any way I can go back to the game developers technical help , until this problem is sorted.
I've put a post on another thread asking which router would be best for me to purchase, as this seems my only course of action, with BT just washing their hands of the situation, saying that although port forwarding is part of the HH3, it doesn't mean to say that it works, and they don't support it !
Many thanks for any replies.
Andy

Similar Messages

USB ports are not working and I can't figure out what to do!

My laptop is a HP Pavilion dv4-1225dx Entertainment Notebook. I've had it for almost three years now. It is running Windows Vista, the same it came with. The problem has only just recently started or was just discovered.
My problem is that the two USB ports in the side do nothing when something is plugged into them. The metal part of the USB devices gets hot but no lights come on the flashdrive and the camera doesn't act like it is plugged in at all. I've looked through Device Manager and it says they are working fine and the correct driver is installed already. There is also no older driver to rollback to. I've tried deleting them, disabling them, and everything that has been suggested online. I even flashed my BIOS from F.33 to F.55, whatever that means, and still nothing.
Does anyone know how to fix this problem? I am a filmmaker and desperatley need my USB ports. Any help would be appreciated greatly

USB ports must be enabled in order for them to work. If you disabled them it is possible that they still are disabled.
If that is the case, have you tried any of these? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00820529&tmp_task=solveCategory&lc=en&dlc=en&cc...
By the way, even though Windows XP troubleshooting may not seem to apply to your situation, sometimes these sorts of errors and problems still happen in Windows Vista. It is rarer but it still happens. One Windows XP based solution can be found here: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00035365&tmp_task=solveCategory&lc=en&dlc=en&cc...
Also, take a look at power management settings for your USB hub and/or USB ports. If they are enabled, try going to Computer Management, Device Manager, and then right click on the USB ports and select Properties. Following this, click the Power Management tab and uncheck the option "Allow the computer to turn off this device to save power" and click OK and exit out of Device Manager.
Odd as it seems, sometimes a restart is necessary for this to work completely.
Also, if you have tried removing the USB Hub drivers according to HP methods, you need to make sure that nothing is plugged into the Ports when you remove them. Often, a restart still is necessary even if some techs do not think to instruct you to do so. After a restart, allow the drivers to reinstall--all of them. Sometimes you still will need to restart your computer again afterward. This sometimes takes a few minutes. But, you must in any case make sure that nothing is plugged into the ports.
You may also want to check to see if your computer has specific drivers for your USB ports rather than the generic ones. If so, running the option for restoring drivers in HP Application Recovery will fix this. If they are there you will see the USB drivers listed.
On rare occasion, there is a problem with a device further down the tree than the USB ports and/or USB hubs themselves. These problems are most often fixed by removing the device that controls the USB Hub, such as the devices attached to the PCI Bus and connected to the USB. You will see where these are connected by changing the view to "Devices by Connection" rather than the "Devices by Type" option.
Let me know your status, please, after you have tried these options. If you have already tried them all out, let me know that, too and we can see if there is another option for you to try.

My iPhone 4 is only 14 months old over dropped very well looke after, one day the lock button stops then the volume buttons, now the headphone port does not work and the battery lasts about 4 hours after full charge I still have a year left on my contract

My phone is 2 months out of warranty, it's never been dropped or miss used yet the past week every day something has gone wrong with it. First the lock button stopped then the side volume buttons. Then the head phone port when I putt headphones in the phone turns the volume
Down automatically and it won't turn up until I take my headphones back out. The battery lasts 4 hours max after a full charge and today I took my phone off the docking charger and all my music has gone! The phone is breaking down more and more everyday what is going on! I know people who have had there iPhones years an non of this happen! I still have a year left on my contract too!

Who is your carrier and what is your coverage with them? If you are with say Verizon, and have Total Equipment Coverage or Extended Coverage, they will swap it out for you under Manufacturer Warrantee.

FF will load but website only appears when scrolling over icon. How do I bring to full screen, clicking will not work and max will not work

FF shows that it is loaded but the website will not come onto the screen. When I put the mouse on the icon, the website is there, apparently to be opened. I click on it, screen flickers and nothing but still showing on icon. I right click, select maximum, and nothing. I was on 3.6.15, upgraded to 3.6.16 and not to 3.4. They are all doing the same thing. I uninstalled FF and reinstalled. Still nothing.

OK, I found a way to do this. Might not be the best way, but it turns out that I can put a addEventListener(MouseEvent.MOUSE_UP, gottaMouseUp) in the calling class, add a public variable in the button class that lets me know if the correct button has been clicked, and use that in the calling class to decide which button was clicked. I knew it was something simple like that....

PavillionG7-2315nr windows 7(64 bit) USB serial control or usb ports are not working. Please help!

Hi I downgraded the laptop from windows 8 to windows 7 64 bit. Two of my USB ports are not working and cant find the right drivers for it. Can you please direct me, where I can download and update the drivers? Thanks in advance.
Shawe

Hi:
Download and instal both of these drivers and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_125616_1&swEnvOid=405...
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5229463&swItemId=ob_123787_1&swEnvOid=405...

I plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

i plugged in my ipod and now i get the error message: Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled" - i have a MAcBook pro and now my USB ports do not work - can anyone help me ???

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

Have just downloaded iTunes 10.5.2.(11) onto Mac Book Pro and now the earphones port does not work. Any suggestions? Annie H

Have just down loaded iTUnes 10.5.2.(11) onto MacBook Pro and now the earphone port is not working. Any suggestions. Annie H

My System Preferences>Soundoutput screen does not have the "Use audio port for" field.
Does your MBP have two separate audio ports - one for line-in and one output port? Then you wan't see that selector.
but the port has started to work again....Reason???
Perhaps there was dirt or something in the jack and the contact was bad.
(or you accidentally put the plug into the line-in jack instead into the audio-out; that happened to me once ).
Regards
Léonie

My usb port not work and hot usb port aria please help me

my usb port not work and hot usb port aria please help me

Hi
Please find the link givenbelow might help you to fix your issue.
USB Device Troubleshooting
Fix Windows 7 “USB Device Not Recognized” Error
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

USB Port does not work W510

Hello all,
I am writing to you hoping that one of you may have an idea what's wrong with my beloved w510.
A few hours ago the usb port (on the back on the right side) where I plugged in my external mouse stopped working.
In the Lenovo part list it is referred to as "usb Sub card yellow".
It just does not recognize a mouse nor any usb stick or external drive. I have already reinstalled the usb controller
but it didn't make any difference. (I think the driver is only for the usb 3 hub on the left side of the notebook)
when I plug in the external drive the lights of the drive start "flashing" same for the usb stick, but they are not recognized as drives..Same for the mouse. The lights go on, but nothing else works.
Probably its all my fault, but I don't know what else I can try! Please excuse my bad English...!
Hoping that somebody might be able to help me...
Paul

I have a reproducible test for this issue on my W510.
1) Plug in a usb mouse into the rear usb port and ensure the mouse is working.
2) Hybernate the system.
3) Resume the system.
4) Confirmed the mouse does not work.
5) Disconnect and attach the mouse to one of the left usb ports and confirm the mouse works.
6) Disconnect and attach to the rear usb port and confirm the mouse does NOT work.
7) Restart the system and confirm the mouse still does NOT work.
8) Shut down the computer (a full shutdown, not standby or hybernate).
9) Power the system back on.
10) Confirm the mouse is now working in the rear port.
I can do these steps over and over with the same results regardless of whether the AC adapter is plugged in or not. It appears that the data connection does not work after the system is resumed from a sleeping state. I have the latest UltraNav driver and utility and the latest power management updates.
Oh, and one more test. Hybernate the system with nothing plugged in, then plug in a mouse into the rear usb port when the system is presently hybernated and then power the system back on. The mouse will not work and rebooting doesn't correct it. Only a full shutdown fixes it.

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

After installation, the mobo LAN port is not working? urgent, help ple

I just installed archlinux on my new i7 860 Asus p7p55d-e Deluxe build, but after the installation the LAN port is not working anymore. Before this, this Lan port works perfect in windows as well as in the arch installation. But after the installation, the led is orange and is blinking slowly, windows complains that the cable is not properly plugged, and even arch installation can't pull DHCP from it also.
Luckily, the mobo has another lan port, so I have to plug the cable out and to the second port, but I couldn't seem to be able to find anyway to enable the first Lan port anymore?
Have you seen anything like this, what possibly is the reason?
Thanks, any help will be appreciated.

heleos, thanks for the reply, the first thing I check is BIOS. There is definitely nothing wrong with that, since I loaded the default one.
It is really strange, it seems no matter what I do, the 1st port which used to work, simple doesn't work, but the second one works fine.
But after some poking around with the "ethtool", it starts to work again. I have no idea what cause the disfunction and what magically heal it again.
Now I am really curious.
Last edited by mark.altern (2010-04-18 09:52:09)

T420 USB Ports do not work after installing XP

Hello my office has been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it. The issue we are having is that the uSB ports do not work. I have tried every driver I can find but still no luck, can anyone help?

hey chris0277,
could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

USB ports do not work

I cant get my usb ports to work, they worked fine when i installed os but after going to standby they all stopped working. I tried to relode drivers but it didnt help. In device manager there is 4 usb's but they do not work, and shouldnt there be 6 . thanx for any help

I'm using a K7N2 board and I was having the same problem. Was able to get around it by just cutting the off the power to the board.
Still doesn't solve the problem of losing USB when Windows XP goes into standby though. If any body has any suggestions it would be appreciated.

Port fowarding not working and Max Payne 3

Similar Messages

Maybe you are looking for