Port iPhone app to iPhone 4

Interested in quickly sizing / aligning images etc. Any tips / procedures from developers is appreciated.

Summarized in one word... What?
Just FYI, this isn't the dev forum.
This is tech support on this community.

Similar Messages

  • I cannot find battery percentages on 'Find my iPhone' app in iPhone 5 after iOS7 upgrade

    I cannot find my other iDevices' battery percentages through using 'Find my iPhone' app in iPhone 5 after iOS7 upgrade.
    Before iOS7, I used to check my devices battery percentages and charging status
    on 'Find iPhone' app. It showed battery charging or not by lightening emoticon something
    on up-right corner of their display.
    It can check only iCloud desktop website now.
    Green battery icon means 'charging now'
    Black icon means not charging.

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
    http://support.apple.com/kb/TS4006
    -Griff W. 

  • Sharing iPhone apps two iphones one computer

    I have just upgraded my iPhone 3G to iPhone 3GS and wish to give my wife the other phone. However she does not want ALL my Apps just some and also not all my contacts - plus those apps she does want we don't want to have to pay for them all over again(like Tom Tom)- how can we sync our phones on one computer and share apps - but enabling my wife to add or remove apps that we have already purhased as well as contact - in other words:
    "can we share apps?" and how do we do it? AND
    "Should I create a new account for my wifes phone and then transfer the apps across to her phone - and if so how?"
    thanks heaps - if you can answer it of course

    There is no device limit for the number of iPods and/or iPhones that can be synced with the same iTunes library and iTunes account on the same computer, which includes 3rd party apps.
    Each iPhone synced with iTunes on the same computer can have different sync preferences. Under the Apps tab for your iPhone sync preferences with iTunes, you can select the apps you want installed on your iPhone, and the music under the Music tab, the movies under the Movies tab, and the photos under the Photos tab for your iPhone sync preferences with iTunes. The same applies under the various tabs for your wife's iPhone sync preferences with iTunes.
    For you wife to start from scratch with what is her iPhone, you can erase all content and settings on the iPhone, or restore the iPhone with iTunes as a new iPhone or not from the iPhone's backup.

  • Is it possible to register my iphone 4 to find my iphone app using iphone ID number only? Because Iooks like I miss placed my iphone somewere and I didn't register it to find my iphen app yet. thanks

    Dear all,
    My friend just lost her iphone 4 and she didn't has find my iphone app. So is it possible to track her iphone using "find my iphone app" by key in its ID number only? Or is that any other way to find it?
    Thanks

    No

  • Can't access iPhone apps throught iPhone

    I tried to access apps store and everytime i try to purchase an application it says i can't because I have a US Apple ID. The funny thing is, I am in the United States. I was wondering if anyone has had this problem; where the phone is mis-reading a location?

    I am having the same problem in Australia. I go into app store on my iPhone and try to download an app, then when I try to log on it tells me this account can only dl in australia. But the app store is in English and shows the amount in aud. It worked fine a few hrs ago, I was able to log on and dl apps. Then I try again and can't! All my settings are correct and last time I sync with iTunes it was in the australia store. Don't know what is wrong with it!

  • Porting an iPhone app to a desktop app

    I am new to objective C and Cocoa, and yet have managed to develop a pretty complex app for the iPhone.
    Being lazy, I would like to also run this on a Mac Pro for instance, or other Mac computers/laptops.
    Is there a simple way for me to "port" my iPhone app to the desktop?
    Thanks.

    Well its not necessarily easy, and you also have to think about rewriting your views for Mac OS X, and not the iPhone, and also keep in mind you have to have a completely different interface in Mac OS X compared to the iPhone. Note that something complex in a mobile device might not be complex at all on a full desktop environment. But considering you have already created the application for the iPhone, you know where your headed and have your objects planned out, and also saying that you can program Mac in the same coding language, it should be easier than scratch right?

  • Find My iPhone app - ports web address

    What ports / web addresses need to be open in order for the "Find My iPhone" app to work. The company I work for currently seems to be blocking whatever needs to be open for it to work properly.

    Read through this article, there is also a link to a support article listing ports for all Apple products:
    http://support.apple.com/kb/HT2463

  • Error Message while login via iPhone App.

    Hello,
    after login at iPhone App an error message occurs.
    "Server connection not possible: Please verify Server host and Port settings."
    Where I could check it?
    Used login:
    Account -> corporate mail
    Password -> new password from OIM
    Server -> https://oradocs-corp.documents.us2.oraclecloud.com
    Thank you for help!
    Regards
    Daniela

    Hi Daniela,
    You should try again because I've tried the mobile app on iphone and android on the same identity domain and it is working with the following credentials:
    Account: corporate mail
    Pass: permanent password
    Server: https://oradocs-corp.documents.us2.oraclecloud.com/
    Regards,
    Cristiana.

  • Is it possible to cancel a remote erase command set in the Find my iPhone app?

    I have recently been reunited with my 17" MacBook Pro by the police after it was lost.
    To cut a long story short I initiated the "erase mac" element as I thought I wouldnt be seeing my MacBook again.
    Sooooo........... now having the computer in my possession again, I d like to know if there is anyway that I can either:
         1. Stop the erase command from initiating?
    or
         2. Recover the relatively small amount of information that has not been backed up (due to travelling) possibly by
              turning my network connection off and taking off before connecting to the internet again?
    I ve contacted Apple Support and they have advised that (1) is not possible as far as they (the operator spoken with)
    are concerned, but (2) was a very good question that they have had no training on or information available about.
    As such, thought I would ask the Guru's here to see what are the possibilities, or have I just got to bite the bullet and
    accept the losses?
    I wondered if the erase command can be sent via an unauthorised network connection such as when wifi looks up what
    networks are available??
    I ve not turned the MBP on since getting it back and am assuming, as there is no notification from the Find my iPhone app
    that it has been located that way, that it has not had network access if it has been turned on at any time since I activated
    the locate and erase facility.
    Many thanks for you kind attention and hopefully positive response.   :-)
    Kind regards
    Bob

    There is one way you can try... it should work in theory. It's called Target Disk Mode. What this does is that you have to connect your computer to another Mac and your computer will show up on the other Mac as an external hard drive. You can then transfer everything to the other Mac.
    Here is where its going to get complicated. You would need another Mac. Since you said your MacBook Pro is a 17" then you still have the old FireWire ports. You need to find out what kind of FireWire port it is (400 or 800). Get a FireWire cable (it's going to be hard nowadays but try Amazon, eBay, Newegg). You might need a FireWire to Thunderbolt converter is the other Mac only has Thunderbolt ports.
    Once you plugged the computers in with the right cable. Turn the other computer on first then turn yours on with the "T" key down. That will enable Target Disk Mode. (http://support.apple.com/kb/PH10725)

  • Macbook pro retina 13 late 2013, usb ports are intermittent with iPhone

    Macbook pro retina 13 late 2013, usb ports are intermittent with iPhone
    when i connect my iPhone 5 to the laptop it keeps connecting and disconnecting, I've had this problem since owning the macbook. change of cables makes no difference neither does which port i use.
    is there any advice anyone could give me?
    many thanks.

    Hello there Jake,
    It sounds like your phone is acting like you are connecting and disconnecing it over and over again even with another USB cable. I would use the troubleshooting in the following article to help you determine what the issue might be.
    iTunes: Resolve USB-related alerts
    See if the cable connection at the device or computer has come loose or unplugged.
    Unplug the cable you're using to connect your iOS device from the USB port on your computer, and then reconnect it. Then unplug it from your iOS device, and reconnect it.
    Remove any third-party battery packs or cases from the device and ensure that the USB cable is connected directly to the port on the device.
    If your Lightning or 30-pin cable is connected to a keyboard, display or USB hub, try plugging it directly into a USB port on the computer instead. 
    Close any virtualization apps (such as Parallels or VMWare).
    These apps may interfere with your computer's ability to communicate over USB if they aren't properly configured, or up to date. If this resolves the issue, contact the developer of the app to see if an update is available.
    Restart your computer.
    Restart your iPhone, iPad, or iPod touch.
    If your iOS device displays the Connect to iTunes screen, reset your device and then restore it.
    If you're using an accessory or third-party cable to connect your device, try using an Apple cable with the device instead.
    Update to the latest version of iTunes if you haven't already.
    Disconnect other USB devices from your computer, except for your keyboard and mouse. Then, reconnect your iOS device. If the issue is resolved, reconnect the other USB devices one at a time. Make sure your iOS device is still recognized by the computer after adding back each device. 
    If one of these steps resolves the issue, but it comes back later, make sure you haven't changed how the device is connected. For example, check to see if you plugged the device into a specific accessory, or used a specific cable that reintroduced the issue.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Can't open soundcloud app in iPhone 4s(restart and uninstal doesn't help)

    can't open soundcloud app in iPhone 4s(restart and reinstal doesn't help)

    The update didn't apply correctly.
    Did you follow the steps exactly in order to restore? disconnect all cables, open iTunes, then connect micro usb
    Apple TV (2nd and 3rd generation): Restoring your Apple TV
    Make sure to connect directly to computer, not a keyboard port or USB hub. Try a different cable.

  • Why aren't there more data-synching apps for iPhone?

    I've been watching as new apps get added to the App Store (I've bought 20+ already, and got a bunch of free ones) and I'm surprised that people/companies aren't developing more apps that sync data. I'm thinking of things like ToDos and Notes. I see a bunch of apps to manage ToDos on the iPhone itself, but nothing "industrial strength", like Documents to Go and others that have been popular on other platforms. I see that Doc2Go does have a product coming for the iPhone, but it looks like they've left out Note synching, so that hole will remain.
    Another data-synching niche would be for an iPhone app that syncs with products like Quicken, where you can have your entire financial portfolio available, and you could make updates on either side and then sync them.
    Yet another - and probably most versatile and robust - would be an iPhone version of FileMaker Pro (or some other DBMS) where you could create data structures on the iPhone (or sync them from a bigger computer) and then add/edit/delete data on either side and sync them.
    If it's just due to software developers ramping up to the iPhone platform, then I'm not concerned. What I do wonder about is if there are issues with either the SDK or the OS itself that make this type of application nearly impossible to develop. So far the iPhone doesn't seem as "open" as other platforms in terms of data management. I don't know what kind of file system it uses -- whether it's HFS+ or what, but I imagine that would be an important factor in developing data-intensive applications.
    Anyway, I'm hoping eventually to see the business-oriented apps on the iPhone that will free my from my old HP iPaq.

    Well one restriction is the the SDK does not allow access to the 30pin dock. So they cannot write anything that can transfer/sync like iTunes does.
    Also this means some type of app must also be installed on your computer. Not to big of a deal, just means for stuff like Quicken they have to update their product as well to work with the iPhone. And since the iPhone's port is not allowed to be touched, they are going to have to do it over WiFi. Not too big of a deal but then you have to deal with users who don't understand their own routers or firewalls to open ports to allow such talking. Like some of the VNC apps on the AppStore to allow you to access your computer remotely. There are tons of bad comments about not working, but that is because users don't understand they also need a VNC server on their computer, they have to setup firewall to open port, and may also need port forwarding depending on their setup. Things many home users just don't understand.
    So while possible (and I agree would be a nice setup for an app) the SDK restricts talking via the dock, so an App to work over WiFi really is only way, but is also very doable I think and a good idea.
    Just so you know, the better forum to bring this up in is the Developers Forum ( http://discussions.apple.com/category.jspa?categoryID=164 ) May get better respnoses there and maybe get somebody to make something for you.

  • Unable to transfer purchased apps from iphone to window 7

    I tried all the solution which been offered from apple support but i still unable to transfer purchased apps from iphone to window 7. Please show me what to do =(

    Are you trying to transfer apps to Windows 7 to USE them on Windows 7, or to back up your iPhone? iPhone apps will not run on Windows (OR Mac OS X); they only run on the iPhone, iPod Touch, and iPad.
    To back up your iPhone, connect the phone to your computer using the cable that came with the phone and a USB port directly on the computer, not a hub. Do not sync.
    Check the account you have on your iPhone by going to Settings/Store. Make sure you are logged in to this same account on your computer, and that the computer is Authorized to this account (check the Store menu).
    Go to the File Menu in iTunes and choose "Transfer Purchases".
    If you have a problem with any of these steps please let us know exactly what the problem is.

  • Forgot my iPad passcode, but must disable the Find My iPhone app

    I forgot my iPad passcode, but am being to prompted to disconnect the Find My iPhone app first....but need a the passcode [reset] first (go figure)

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...
    Note: Data will be lost

  • Connecting iPhone apps through wi-fi proxy

    Hi
    My college has just introduced a proxy server for its wi-fi connection - and my iphone apps no longer work. I've put the server details, port and username/password in on the wi-fi settings page - and Safari and mail seem to work correctly and go through this. However I can't use my normal apps (like facebook, twitterific, toodledo, e-news etc..) so they don't seem to be going through the proxy. Is there some way I can make them do this? I don't have a dataplan as I'm spending some time in Africa and it would be too expensive, so could really do with making this work!
    Thanks for any time and assistance.

    absolutely same issue here. everything works fine on wi-fi without proxy but as soon as there is proxy (in my case wpa2 enterprise) only safari and app store works, all other apps do not see connection. this problem remains unresolved since firmware 2.0 (before it everything was fine) and now we are using 4.0.1 and nothing changed.

Maybe you are looking for

  • How do my husband and I use the same itunes acct

    People tell me all the time that their whole family has the same iTunes account so they can share everything. How do they do that? I tried to do mine on my husands phone and it said that the account was already in use so he set up his own. How do we

  • How to run a jar file in JBuilder

    Hi there I need to know how to run a jar file using JBuilder. Thanks :) Countess

  • Portal throws "page can't be displayed" when accessed through IE

    Hi , We have a peculiar case where in EP7 portal is  throwing "page can't be displayed" error when accesed through IE 6 but is opening through firefox. This shows no network issue nor with the host file. Can you pls advice on this as this is a prod p

  • Peforming two processes on submitting the form

    Hi All, In my application i created a form in which i have to create one query... 1) in this form on the basis of product & variant type, value of fields(model code & vin number ) automatically comes from the table by clicking on submit... 2) but i a

  • Show number in ADF

    In my oracle, the number is saved as 4 digit number. However, these number cannot be showed by ADF properly. For example, the number saved at DB is 0.1234. ADF shows it as 0.123. If the number saved in DB is 0.1235, ADF shows it as 0.124 How to show