Port Issues

I hope someone out here can help me out. I recent purchased a Synology diskstation server and am trying to set it up to access it from remote locations. Originally I had it hooked up through my Linksys router and had ll the port forwarding setup correctly but When tested from multiple sites it came back as the port was locked and could not be connected to. So I hooked up my D-Link router and set it up and got the same results. Fuinally I connected my server dieectly to my BT home hub 2 and tried port forwarding to no avail. I also tried to enable DMZ to the servers IP and it still always comes back as not available. To this point I have tried everything and the only thing left past the bt home hub is outside, so Im at a loss. Please help. Main ports I am trying to access are 80, 5000, and 7000. My server is hard wired to the Homehub. Thank You

That sounds strange. If you have the port, forwarded to the device behind the firewall it should work just like the others are working. I would try with no preloaded configurations on the router, see if you can get the port will open up and allow you to the device behind the firewall. It could be something in your configuration. If that don't work, then reload your configuration and we will see what else we can do.

Similar Messages

Any known 'porting' issues between 8.2.2 and 9.0 ??

Hi all,
we are in the process of evaluating LS ES2 (9.0) and would like to know if there are any 'porting' issues between the two versions. Asked another way, are there any issues in deploying a 8.2.2. LCA onto 9.0 ?
Dan

8.2 LCA's will run fine in 9.0 if they are just deployed into it. But in 9.0 a new application model has been introduced, so in order to make changes to anything after you've migrated it you'll need to create an application and migrate your processes and resources into it. You may want to take a look at the Leveraging Legacy Solution document available online. Here's the link: http://help.adobe.com/en_US/livecycle/9.0/workbenchHelp/help.htm?content=leveragingLegacy. html .
Chris

Airport Extreme Skype works, but not mail or Safari? Port issue?

So I have a weird issue with my AE.
Often the internet will just go away...Safari will not work, iChat will not work and mail will not work. Today when it happened I noticed Skype was still logged in and working. I hadn't noticed this previously since I just this week installed Skype. When I am having an issue with my MacBookPro the MacBook in the house also has the same issue so it can't be my computer.
I also don't think its comcast because of the whole Skype working fine thing. Also when I "borrow" someone elses wifi connection everything works...mail works, Safari, etc...
So it must be something with my Airport Extreme. The only thing I can think of is some port issue. The AE has the lastest firmware from a month ago or so...
This tends to happen about once a week for a few hours and then it suddenly gets better for no apparent reason. The AE is in a cabinet in the entertainment center so it gets a bit warm in there sometimes but this morning it was pretty cool in the house and it still did it so I don't think its heat related...
Any other thoughts?

naw i'm back in the states now so it's pretty much no longer an issue. thanks though! If you know anything about mirror agent and logout issues you could look at my other question in using mac OSX Tiger called "mirror agent & failed logout -- HELP!"
thanks!!

Is 10.9.4 having USB port issues?

Is 10.9.4 having USB port issues? I'm noticing copying files to USB ports on my Mac Pro (the front two anyway) seems to be like molasses and give me the pinwheel of death.
Anyone?

Try resetting SMC.
Reset SMC. http://support.apple.com/kb/HT3964
Choose the appropriate method.
"Resetting SMC on portables with a battery you should not remove on your own".

MSI Gaming 5 USB ports issue

Hello everyone,
I apologize if I posted this in the wrong section, so as the title says it, sorta of a huge USB ports issue just happened after installing the motherboard / windows / all drivers, even restarted a few times
then tested the processor and video card.
Everything ok to that point, I left the pc opened for 3 hours, shut it down, the next day..I couldn't type the windows password.
Alright restart, that maybe one of those kinks that goes away on it's own I guess..Switched each device in different ports..nothing, tried only one device..still nothing.
Tried only usb2.0 ports then 3.0 port > a a little panic kicked in :D
So, in my bios I was seeing 2 keyboards 2 mice..ok...got a bios update from msi site..latest one..flash ..reboot..still nothing.
Strange part was..they were working just fine in bios and everything prior to windows loading, even after that mouse was showing power ( led was ok )but no functionality.
Safe mode didn't help..the miracle of last known good config saved the day.
BUT after choosing the option..ok it started working....randomly..I was typing the windows pass...and right in the middle ...it stopped again..mouse was working...tried again..stopped at 75% of the password.
Tried again...it worked > Reinstalled every driver.. seems stable for now, though being day 2 of this whole deal.
So if anyone honors me with enough time to read the story and maybe relate I would glady appreciate it.
Guys if anyone had any usb related incidents with any of the Z97Gaming boards please share
If I missed anything, please ask.
Thank you

Hello everyone,
Sorry for the delay in all of this and thank you for the input.
Specs are below, and this is something currently in the process of being upgraded.
I7 4790k / MSI Gaming 5 / Sirtec 500W / 8 gb ram Corsair Vengeance / AMD sapphire 7970 GHZ / one single HDD 1 GB
The Windows installation went fine on 2 other colleagues from work.
For the moment stable, I removed and reinstalled all USB related drivers.
It was a weird one though..

Charging port issues

So I see almost everyone that has the Incredible 2 has had a charging port issue. I love it how one Verizon store told me it was a known issue and another store said it wasn't. It seems like it is well known and Verizon nor HTC wants to own up to it. Everyone that has this issue should not have to pay the $99 out of warranty fee for a refurbish phone. I got to wait a month to get my upgrade. The only way my phone charges is through my laptop usb cord which is weird but not my wall charger. To be honest, I might have to switch to a different brand or maybe even go to a different carrier.

Well, when you see how many people are on here writing the same issue and a Verizon rep replying to trying to take care of it, its going to be a known issue. Even called HTC to see how much to fix through them. The gentleman has had calls in the past and recently about people complaining about the same issue. I know Verizon stores don't fix these issues in the store, but I expect better from a smartphone. All of my phones in the past never had this issue.
Regarding the service, Verizon still has the best in my area.
When you work retail, you should help a customer try to fix there issue by at least mentioning someone who can fix it.
Not just trying to sell another product. That isn't good customer service.

IPhone 5c Orange EE PORTING ISSUES/SMS Problems

Hi,
I upgraded from Orange to EE a year ago and opted to keep my original phone number.
The day I had the phone I restored all my settings from the cloud. Everything worked fine apart from SMS messaging to non-iPhones.
I found out that I only had the email selected on the send and receive section of the settings, at the time my was greyed out and I could not select it, this has now disappeared completely!
I rung EE customer services and we went through EVERYTHING to try and fix this phone so I could send SMS messages. They told me it was a porting issue and it would be resolved in a week or so, but a year on, I'm still brother getting my SMS service.
Also although iMessage works, it still says waiting to connect in both message and face time settings.
I've tried everything with this phone and not even EE could solve it.
What's going on?

Hello
Welcome to the EE Community! Wow, you're a patient one! Waiting a whole year is a very long time - I'd definitely advise you contact the team again to get this put on the radar again. Here's how to get in touch with the EE Customer Service team:
If you're on Twitter, you can tweet them @EE, however If you'd prefer to talk to someone, you can dial:
150 from your EE mobile phone
If you're ringing from another phone, it's 01707 315000
For handy text codes & more, check out this page: http://ee.co.uk/help/get-in-touch Cheers,
Titanium
Was my post helpful? Please take 2 seconds to hit the 'Kudos' button below

Open port issues with Direct Print functionality

Hi, I have been fighting with HP call support about the Photosmart 7525 printer.
Originally I setup and had performed all the functions to enable both web support and WIFI.
Within an hour the printer would not respond to wireless communication, though it had its wireless indecator showing it was connected.
I was told by HP support that the issue will be resolved in March, as there will be a firmware update to fix the issue.
Now that I had the printer install the new firmware I still get the issue.
Though I found through some sniffing, that there are a number of ports enabled and open that are over and beyond print requirements.
Funny thing I can send my printer into instant lockup with all lights flashing with a simple UDP ping sniff. I would think I can do this with other new HP printers using Eprint functions. I will find HP web based printers that are open for public printing and test my theory that HP Eprinters are open to hacking and denyal of service attempts. My Hp print app on andriod list three in my area, and one is at my local Walmart. This would be cool to find this, as I am usually not the first to point such matters out.
I assume some are for Apple devices to print.
Here is my sniffing report:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:57 Central Daylight TimeNSE: Loaded 110 scripts for scanning.NSE: Script Pre-scanning.Initiating ARP Ping Scan at 07:57Scanning 192.168.223.1 [1 port]Completed ARP Ping Scan at 07:57, 0.23s elapsed (1 total hosts)Initiating Parallel DNS resolution of 1 host. at 07:57Completed Parallel DNS resolution of 1 host. at 07:58, 16.50s elapsedInitiating SYN Stealth Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 445/tcp on 192.168.223.1Discovered open port 139/tcp on 192.168.223.1Discovered open port 80/tcp on 192.168.223.1Discovered open port 443/tcp on 192.168.223.1Discovered open port 8080/tcp on 192.168.223.1Discovered open port 9220/tcp on 192.168.223.1Discovered open port 6839/tcp on 192.168.223.1Discovered open port 631/tcp on 192.168.223.1Discovered open port 7435/tcp on 192.168.223.1Discovered open port 8089/tcp on 192.168.223.1Discovered open port 9100/tcp on 192.168.223.1Completed SYN Stealth Scan at 07:58, 1.71s elapsed (1000 total ports)Initiating UDP Scan at 07:58Scanning 192.168.223.1 [1000 ports]Discovered open port 5353/udp on 192.168.223.1Completed UDP Scan at 07:58, 1.82s elapsed (1000 total ports)Initiating Service scan at 07:58Scanning 20 services on 192.168.223.1Discovered open port 161/udp on 192.168.223.1Discovered open|filtered port 161/udp on 192.168.223.1 is actually open
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 07:51 Central Daylight TimeNmap scan report for 192.168.223.1Host is up (0.0025s latency).Not shown: 93 closed portsPORT STATE SERVICE VERSION80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)139/tcp open tcpwrapped443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)445/tcp open netbios-ssn631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)9100/tcp open jetdirect?MAC Address: A03:C1:BD:C8:34 (Unknown)Device type: printer|general purposeRunning: HP embedded, Wind River VxWorksOS CPE: cpe:/h:hp:laserjet_cm1415fnw cpe:/h:hp:laserjet_cp1525nw cpe:/h:hp:laserjet_1536dnf cpe:/o:windriver:vxworksOS details: HP LaserJet CM1415fnw, CP1525nw, or 1536dnf printer, VxWorksNetwork Distance: 1 hopService Info: Device: printer; CPE: cpe:/h:hphotosmart_7520OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .Nmap done: 1 IP address (1 host up) scanned in 34.11 seconds

OK now I am able to run a full scan on TCP ports without causing a lock up of the printer.
I found that having the printer connect to a router that has been setup to use channel 5, 6 or 7 will cause port scanning issues with the printer.
It is obvious that there are 18 ports that are seen as open, whether they are used or not. Two of which are active but have no service connected to them. Some are just dead like port 25, but over half are active enough to recieve data and lock network connectivity within the printer.
As the firmware states some other laser jets may be affected depending on how the configuration can be set.
I moved my routers channel to channel 1 as it is the only other option I have in a highly congested location. It is not as good as channel 6, but the printer seems to have channel 6 locked in for direct printing.
Here is the latest full scan with UDP enabled, it is the furthest and most complete scan I am able to complete, with UDP ports enabled. The TCP port scan has a bit more and I have placed a simple list below the information given here:
Starting Nmap 6.40 ( http://nmap.org ) at 2014-03-21 13:27 Central Daylight Time
NSE: Loaded 110 scripts for scanning.
NSE: Script Pre-scanning.
Initiating ARP Ping Scan at 13:27
Scanning 192.168.1.211 [1 port]
Completed ARP Ping Scan at 13:27, 0.44s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 13:27
Completed Parallel DNS resolution of 1 host. at 13:27, 0.03s elapsed
Initiating SYN Stealth Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 443/tcp on 192.168.1.211
Discovered open port 80/tcp on 192.168.1.211
Discovered open port 139/tcp on 192.168.1.211
Discovered open port 8080/tcp on 192.168.1.211
Discovered open port 445/tcp on 192.168.1.211
Discovered open port 631/tcp on 192.168.1.211
Discovered open port 9100/tcp on 192.168.1.211
Discovered open port 7435/tcp on 192.168.1.211
Discovered open port 9220/tcp on 192.168.1.211
Discovered open port 6839/tcp on 192.168.1.211
Completed SYN Stealth Scan at 13:27, 5.25s elapsed (1000 total ports)
Initiating UDP Scan at 13:27
Scanning 192.168.1.211 [1000 ports]
Discovered open port 137/udp on 192.168.1.211
Completed UDP Scan at 13:27, 4.46s elapsed (1000 total ports)
Initiating Service scan at 13:27
Scanning 16 services on 192.168.1.211
Discovered open port 161/udp on 192.168.1.211
Discovered open|filtered port 161/udp on 192.168.1.211 is actually open
Completed Service scan at 13:29, 82.51s elapsed (17 services on 1 host)
Initiating OS detection (try #1) against 192.168.1.211
NSE: Script scanning 192.168.1.211.
Initiating NSE at 13:29
Completed NSE at 13:30, 82.29s elapsed
Nmap scan report for 192.168.1.211
Host is up (0.023s latency).
Not shown: 1983 closed ports
PORT STATE SERVICE VERSION
80/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
139/tcp open tcpwrapped
443/tcp open ssl/http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
| ssl-cert: Subject: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Issuer: commonName=HPPS7525/organizationName=HP/stateOrProvinceName=Washington/countryName=US
| Public Key type: rsa
| Public Key bits: 1024
| Not valid before: 2014-02-25T10:12:24+00:00
| Not valid after: 2034-02-20T10:12:24+00:00
| MD5: 9144 ca3b 557e 09cc aba0 8387 2732 2375
|_SHA-1: a6b2 95c0 b72a 7201 578c 32de 662a e6fe b082 48ca
|_ssl-date: 2014-03-21T13:30:09+00:00; -4h59m12s from local time.
445/tcp open netbios-ssn
631/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
6839/tcp open tcpwrapped
7435/tcp open tcpwrapped
8080/tcp open http HP Photosmart 7520 series printer http config (Serial TH3AS711XZ05YZ)
|_http-favicon: Unknown favicon MD5: 76C6E492CB8CC73A2A50D62176F205C9
| http-methods: GET POST PUT DELETE
| Potentially risky methods: PUT DELETE
|_See http://nmap.org/nsedoc/scripts/http-methods.html
|_http-title: Site doesn't have a title (text/html).
9100/tcp open jetdirect?
9220/tcp open hp-gsg HP Generic Scan Gateway 1.0
137/udp open netbios-ns Samba nmbd (workgroup: HPPS7525)
138/udp open|filtered netbios-dgm
161/udp open snmp SNMPv1 server (public)
| snmp-hh3c-logins:
|_ baseoid: 1.3.6.1.4.1.25506.2.12.1.1.1
| snmp-interfaces:
| Wifi0
| IP address: 192.168.1.211 Netmask: 255.255.255.0
| MAC address: a0:d3:c1:bd:c8:32 (Unknown)
| Type: ethernetCsmacd Speed: 10 Mbps
| Status: up
|_ Traffic stats: 6.16 Mb sent, 3.43 Mb received
| snmp-netstat:
| TCP 0.0.0.0:7435 0.0.0.0:0
| TCP 192.168.1.211:56076 15.201.145.52:5222
| UDP 0.0.0.0:3702 *:*
| UDP 127.0.0.1:666 *:*
|_ UDP 192.168.223.1:67 *:*
| snmp-sysdescr: HP ETHERNET MULTI-ENVIRONMENT
|_ System uptime: 0 days, 3:34:23.28 (1286328 timeticks)
| snmp-win32-shares:
|_ baseoid: 1.3.6.1.4.1.77.1.2.27
1022/udp open|filtered exp2
1023/udp open|filtered unknown
3702/udp open|filtered ws-discovery
5355/udp open|filtered llmnr
MAC Address: A03:C1:BD:C8:32 (Unknown)
Device type: general purpose
Running: Wind River VxWorks
OS CPE: cpe:/o:windriver:vxworks
OS details: VxWorks
Uptime guess: 0.150 days (since Fri Mar 21 09:55:04 2014)
Network Distance: 1 hop
TCP Sequence Prediction: Difficulty=255 (Good luck!)
IP ID Sequence Generation: Busy server or unknown class
Service Info: Hosts: HPA0D3C1BDC832, HPPS7525; Device: printer; CPE: cpe:/h:hphotosmart_7520
Host script results:
| nbstat:
| NetBIOS name: HPA0D3C1BDC832, NetBIOS user: <unknown>, NetBIOS MAC: <unknown>
| Names
| HPA0D3C1BDC832<00> Flags: <unique><active><permanent>
| MSHOME<00> Flags: <group><active><permanent>
| HPA0D3C1BDC832<20> Flags: <unique><active><permanent>
| HPPS7525<00> Flags: <unique><active><permanent>
|_ HPPS7525<20> Flags: <unique><active><permanent>
| smb-security-mode:
| Account that was used for smb scripts: guest
| User-level authentication
| SMB Security: Challenge/response passwords supported
|_ Message signing disabled (dangerous, but default)
TRACEROUTE
HOP RTT ADDRESS
1 23.26 ms 192.168.1.211
NSE: Script Post-scanning.
Read data files from: F:\Progs\Nmap
OS and Service detection performed. Please report any incorrect results at http://nmap.org/submit/ .
Nmap done: 1 IP address (1 host up) scanned in 180.90 seconds
 Raw packets sent: 2030 (74.829KB) | Rcvd: 2921 (149.377KB)
+++++++++++++++++++++++++++++++++++++++++++++++++++++===
Full TCP port scan without UDP scanning of all ports, showing up as open... * designates open and active.
192.168.223.1Discovered open port 25/tcp on
*192.168.223.1Discovered open port 80/tcp on
*192.168.223.1Discovered open port 110/tcp on
*192.168.223.1Discovered open port 119/tcp on
*192.168.223.1Discovered open port 139/tcp on
192.168.223.1Discovered open port 143/tcp on
*192.168.223.1Discovered open port 443/tcp on
*192.168.223.1Discovered open port 445/tcp on
192.168.223.1Discovered open port 465/tcp on
192.168.223.1Discovered open port 563/tcp on
192.168.223.1Discovered open port 587/tcp on
*192.168.223.1Discovered open port 631/tcp on
192.168.223.1Discovered open port 993/tcp on
192.168.223.1Discovered open port 995/tcp on
*192.168.223.1Discovered open port 7435/tcp on
*192.168.223.1Discovered open port 6839/tcp on
*192.168.223.1Discovered open port 8080/tcp on
192.168.223.1Discovered open port 8089/tcp on
*192.168.223.1Discovered open port 9100/tcp on
*192.168.223.1Discovered open port 9220/tcp on

XI- Xi Scenario XI Adapter (Port Issue)

Hi all
 we are implementating File - XIA--|Internet|--
XIB -File.
At XIA i am using XI Adapter(receiver)
 Message protocal HTTPS
At XIB I am using XI Adapter(sender)
 Messaage protocal HTTP
Now the issue is
 XIA is using HTTPS protocal , that means it will post data
to port 443 ( HTTPS Port)
 But at XIB message protocal is HTTP.
So which port at XIB we need to open HTTP port or HTTPS port
Note: Both XI are at different landscape.
receiver : XIA communication channel to post data to XIB.
sender : XIB communication channel to receive data from XIA
we had gone through these blogs before posting this query..
Re: XI -> XI scenario
Re: XI to XI connectivity
connection XI to XI
Re: XI to XI connectivity
/people/abhy.thomas/blog/2007/01/18/xi-content-certification-in-a-b2b-scenario--case-study
/people/alwin.vandeput2/blog/2006/06/07/d-xie-soap-part-4-xi-software-component-architecture-for-point-to-point-scenarios
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--i
/people/yomeshp.sharma/blog/2006/06/01/integrating-jdedwards-system-with-xi-using-iway-adapter-part--ii
Regards,
Ashutosh

hi,
have a look at this guide:
How To Configure Message Level Security in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b2e7020d-0d01-0010-269c-a98d3fb5d16c
is shows how to connect two XIs (one is "small XI" PCK)
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Client proxy consuming web service provider using logical port issue

Hi All,
I have a proxy client having a logical port (configured using NWDS) to consume a web service in the provider system.
In the logical port, I have given target address, and logical port name. While moving this client proxy NWDI dev track to Q and prod,
how do I change this target address to point to Q and prod respectively. In other words, even though I am using Visual admin to configure the destination url for the logical port, to point to Q and prod, its still referring to the dev environment provider service after moving the proxy client to Q and prod. What is the suggested approach to take care of this issue
Thx
mike

Hi Michael,
I can only help from that point of view that I believe this question belongs to the forum
Service-Oriented Architecture (SOA) and SAP
Please try to raise this question there.
Thanks and Regards,
Ervin

USB/FireWire Ports Issue

So before I go into the apple store and ask for this computer to be repaired/replaced, I would like to see if anyone knows if something can be done about this issue I have pinpointed..
Basically when I have more than a few USB/FireWire ports connected, one or more of the devices does not function properly. This has happened with two external hard drives - which should have no problem being connected simultaneously.. When I try to eject one of them, I receive a message stating that it cannot be ejected because one or more programs may be using it.. although all programs are closed, causing me to have to force eject..
Also, I plug in one drive and open the other in finder to back it up, and all of the folders in the drive are suddenly empty.. nothing inside. I go to Get Info.. Zero KB.. I try ejecting, but receive the same message, so I force eject, plug it back in, and wala, all the files are back in the right place..
This has also happened in the past when my cinema display and a printer were plugged in simultaneously.. the computer won't detect the USB of the cinema display -- which only means that the speakers of the display won't work + no brightness control from the keyboard.. so i let it slide.. but now with this external hard drive issue, i need to solve the problem..
Thank you for reading..

Same here. Since a few weeks, my MacPro ejects USB HDD's as soon as I write or read data on it.
(no I haven't installed something new at this time and all HUB's and HDD's have their own power supply, and yes they have been exchanged, so its not a broken cable or so !!!!!!!!)
After a reset of the NVRAM and PRAM its better for an hour or so, then starts to eject again. I've seen a lot of communities with exact the same question, but never a solution for it. There is also nothing in the support tab of apple.
Hope someone here can help me out or due to the fact that this is a AplleSupportCommunity, a Apple-Employee may starts to do his job and help this huge amount (I guess there are hundrets or tousand) of mac-user with exact the same problem....
btw: don't agree with MACATTACK2010 that this is a hardware problem, cause there are a lot of people in the
net that ask the same question with brandnew Hardware. I think it's an OS or an Update Bug, or may both.

Minidisplay port issue

Hi all, I just got a new Macpro last week. It's been a major pain reinstalling all music programs etc (made the mistake of trying the Migration assistant)
Now my final issue is a wierd one which I'm sure has a simple solution.
I'm using dual VGA Dell monitors and I purchased the Rocketfish MiniDisplay Port to VGA adaptar. The monitor displays don't seem to line up correctly. The monitor coming from the mini port seems to be a few inches lower and if you look at this screen recording you can see what's going on:
http://screencast.com/t/9lUcr7BP
When I drag a folder across to the second monitor you can see how it displays lower.
The settings for the displays are identical inside the display preferences so I'm wondering if this is the Rocketfish Adapter that's causing this or whether it's a hardware issue.
Appreciate any insight.

I phrased my reply based on what you said in your original post,
The settings for the displays are identical inside the display preferences
which I interpreted that you had already aligned the two monitors in the Display's Arrangement tab. Oh well, glad you got it lined up now.

Charger port issue?

So I've been having a slight issue with my Droid X. This started yesterday. I had it plugged in and it randomly stopped charging then started again. It was quick but I saw it. It happened again today. So I'm wondering if my Droid's charger port is **bleep** up or if the tip of the charger cable is messed up. I'm assuming it's a phone issue though. Now this is my baby (second to my ASUS laptop) but i treat it with plenty of care, and I am gentle with it.

Here's the cable I purchased and it works great.http://www.amazon.com/gp/product/B002I8MUJG I was so happy with it that I purchased 3 more for around the house.
I also picked up a DIRT cheap HDMI cable here: http://www.amazon.com/gp/product/B003XNANU8 It works wonderfully as well! I was a bit skeptical when I bought it and figured I'd just be out $5 worst case. I was happily surprised when it worked flawlessly.
I've had both products about 2 months now and they are holding up very well.

SOAP RECEIVER SCENARIO PORT ISSUE

Hi gurus,
we are testing a proxy to soap synchron scenario and cannot get response from receiver. We have a firewall issue and need to open required ports.
Which ports should we open? 50000? 80?
Kind Regards,
PM

Hi Peter,
SOAP communication uses HTTP protocol, so messages are transferred over 80 or 443 port by default, depending on whether you use HTTP or HTTPS communication, correspondingly.
Hope this helps,
Greg

Port issue with j2ee engine, http service provider

hi gurus,
on two of our standalone j2ee servers, the j2ee engine is up and running fine. from the mmc everything shows green including messager server.
but when i connect to the j2ee page using browser either from the client machine or on the server it never gives me an error message but the status bar keeps processing. never throws any sort of dispatcher or 500 error messages.
There were some GRC-Virsa components deployed over the weekend not sure if that had changed something.
After intial research the port information in the HTTP service provider showed 80 for http and 443 for ssl (https)so i had manually changed it to 50000 and 50001 from config tool respectively , restarted the server.
After the restart the j2ee page came up and the very second http request it goes to the loop again with no error message, whats the reason behind this sort of behavior. i have made the port changes over the whole cluster and restarted.
surprising it works only for the first time after restart, the very second http request never accepted by dispatcher/server process , no error message though.
environment, nw04s with plain j2ee, windows 2003, sql2008
please assist.
-durga

thanks sean for responding, infact the issue is resolved yesterday.
Reason due to insufficient application threads and make sure the right port defined in HTTP service provider. So fixing these two things resolved the issue
Thanks,
Durga

Trouble connecting iPhone to remote IP Panasonic cameras- Ports issues

Cannot connect remotely to camera DVR with the iPhone due to Java Applet issues not supported by Apple. I also cannot connect to the home panasonic IP cameras because the error "Not allowed to use restricted network port" appears. In order to connect to the cameras remotely I must enter the port number after the local IP address, and is not allowing me to do that. Any expert out there? Example of a connecting address: http;// 95.242.228.177:80 (80 being the port).

Are you using a specific application to connect or trying to go through Safari?
You may need to use an app that connects to IP cameras.
You can search the app store and search "video camera" or "webcam"

Port Issues

Similar Messages

Maybe you are looking for