Port Mapping is not working ?

First of all, sorry for my bad english as it is not my primary language.
So my problem is that I play Warcraft 3 and that I would like to host some games. To be able to host, I have to do port mapping for the ports : 6112-6119, which I did in the Airport Utility --> Advanced --> Port Mapping. I did it for every port 6112, 6113, etc. But the thing is that when I go on this website: http://www.whatsmyip.org/ports/games/ (Which is a website that tells me what ports are open on my computer), only port 6112 is open. Ports 6113-6119 are closed. Before my Airport Extreme, I had a Linksys and I had no problems with hosting and port mapping, which means it is not my ISP that is blocking the ports.
Also this is the setup of my internet if it can help. I have an AirPort Extreme wich is connected to the modem in my basement (I did the port mapping on this one) . From this Airport Extreme, I have another Airport Extreme connected to it. I am connected to the second Airport Extreme in bridge mode with ethernet.
I don't know if this was clear or not lol. Anyway I would appreciate any help. Thank You !

This is just a guess, but if you still have that AirPort Extreme, you might plug it in long enough to have AirPort Utility do a File >Export Configuration File, then reconnect the Time Capsule and do a File > Import Configuration File. Once that's done you may have to do a little adjustment to account for the disk drive.

Similar Messages

Port Mapping is not working on Time Capsule

I have replaced my Airport Extreme with a Time Capsule for back up purposes, but the Port Mapping functionality is not working as it did on the Airport Extreme. I have my security camera DVR connected to the network and am using Dynamic DNS to resolve the WAN IP Address. HAs anybody any experienced this problem with Time Capsule?

This is just a guess, but if you still have that AirPort Extreme, you might plug it in long enough to have AirPort Utility do a File >Export Configuration File, then reconnect the Time Capsule and do a File > Import Configuration File. Once that's done you may have to do a little adjustment to account for the disk drive.

Is it possible to downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

is it possible to downgrade ios 6 to 5.1.1(i upgrade my iphone 4s from 5.1.1 to 6 but map is not working )

best answer to your question I've ever seen is;
Kappy Tampa, FL and Vancouver, BC
Re: Downgrading Oct 16, 2012 2:57 PM (in response to nbabbit2013)
I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

In my MacBook Pro Maps app not working properly?.. any solution

Maps app not working properly?.. any solution

If i search any routes by clicking directions tab,the message shows like this " DIRECTIONS ARE NOT AVAILABLE A ROUTE TO THE DESTINATION FROM ITS NEAREST ROAD CANNOT BE DETERMINED"

The Port : 6001 is not working in the system

Hi Experts,
OS : AIX 6.1
SAP : SAP Netweaver EHP1
In the OS level the Port : 6001 is not working and giving the out put as...
pb2adm> telnet abcprdpb2 6001
Trying...
telnet: connect: A remote host refused an attempted connect operation.
Virtual host : abcprdpb2
As it is the BI java stack system & I configured the SMD & wily in the system. From the BI java stack system the wily agent is not working and it uses the port : 6001.
Now the issue is regarding to the port : 6001
when telnet in the same system which is Virtual host : abcprdpb2 is not working and which I have given the output above. It is working when I telnet to the other systems. Please see the output below...
pb2adm> telnet abcprd001 6001
Trying...
Connected to abcprd001.
Escape character is '^]'.
Connection closed.
From other system virtual host : abcprd001
As I have checked with the firewall team and said it is fine in the system and same us AIX team also. But still port : 6001 issue is not resolved in the Virtual host : abcprdpb2
Can you please let me know how to open the port : 6001 in the Virtual host : abcprdpb2 and also how we can confirm that port : 6001 is opened or blocked in the Virtual host : abcprdpb2.
Thanks & Regards,
Sandeep.

Hi,
The both mentioned virtual systems are in different LPAR's (Physical host).
Already I have checked the /etc/services and looks every thing is fine in the file. I have also checked the file inetd.conf and I didn't find any thing # on the Telnet.It seems every thing is fine in the both files.
Can you please look in to it and provide some thing which I have to look in the OS level.
Thanks & Regards,
Sandeep

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes

The application maps is not working. When I try to run it opens for a few seconds with a blank screen and then closes.

Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

Input Parameter Mapping is not working in Sap HANA

Hi, We created on ANALYTICAL view(A) with Input Parameters, on top of Analytical view created one Calculation view(B) and mapped Calculation view input parameter with Analytical view input paramter and its working fine. Finally we created one more calculation view on top existing calculation view(B) and mapped with corresponding input parameters. Input parameter mapping is working fine in between A(analytical view) and --------> B (first Calc view) but input parameter mapping is not working properly in between B(first Calc View)-----------C(second Calc View). it is giving all data whatever is coming from Calc View B. Kindly help us to resolve this.

Hi,
Write c in small for Command,
theButton.mappingOfOnAction().addParameter("command","Save");
Regards,
Murtuza

Maps is not working properly anymore

I am using iPad2 with iOS6 and since a few days Maps is not working properly anymore

I'm having the same problem. I have a 4th gen 32GB iPod Touch, and since upgrading to iOS6, iMessage has been nothing but buggy. It will work for an hour or so, and then randomly stop working as it won't send or receive messages. There's nothing wrong with my wifi, because that's the same as it was before. I really hope someone knows something to fox this problem. Some people use iMessage for good reasons - it needs to be a reliable messaging service like it was in iOS5.

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Maps app not working on Network Users

Maps app not working on network users on client machines?, is everyone having same issue?, Thanks in Advance

Sometimes it does, sometimes it does not. I assume we're talking about network users with home folders on a remote volume…
The only thing I could do about it was to inform Apple…

Maps are not working in India after updating to iOS 6

I bought my iPhone 4S from USA now I am in India and I updated to iOS 6 but now maps are not working.. Earlier it use to search every single place in india.. What to do??

me too stuck up with the iOS 6 update. I was using my phone mainly for tracking roads and places. Now its useless. So guys if u r using iOS 5.1 in India dont update to iOS 6.Moreover i cant find google maps app in Appstore! can anyone find me a solution?

Disable port monitoring task not working

Hi,
On SCOM 2012 SP1 the task "disable port monitoring" is not working. When I run it shows a success message but the port\interface keeps to be monitored on scom, the ports that I'm trying to disable the monitoring are members of the Relay Network
Adapters Group. Is there any way to fix this task or manually stop the monitoring of the port\interface ?

Hi Carlos,
By coincidence I ran into the same problem today.
It can be disabled by creating an override where you target the specific port object and set the parameter enabled=false.
I am not 100% sure this is the correct way but it works. I am assuming the disable port does something similar but I have to open up the task to confirm this.
For now I hope this helps.
Regards Marthijn van Rheenen
Blog: Heading To The Clouds

I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

I have iPhone4 with updated software 6.0.1. Voice nevigation for map is not working. I could not see the voice options in setting/mapp.

Voice navigation is not available for the iPhone 4

My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

My outgoing mail server smtp remains offline. I have tried using different port but did not work. What else can I try?

OS X Mail: Troubleshooting sending and receiving email messages

IOS 6 Map Direction Not Working

Hi this is Karthikeyan from India, I am using apple iphone 3GS, I have updated os from ios5 to ios6, the problem is io6 map is not working like previous version ios5... The main problems is in ios6 map Route Directions completely not working... anyone help to resolve this..??

First, I would suggest looking at: http://support.apple.com/kb/HT5429.
In ios 6, apple removed google maps as the default and provided their own mapping service. Maps is not available in all areas and there are ways to report problems inside the application.

Port Mapping is not working ?

Similar Messages

Maybe you are looking for