Port Mapping Problem with AEX

I have a new Airport Extreme and a problem that did not exist with the Airport. I connect a Toshiba network camera to an Airport Express, set as a WDS remote, with the netcam connected to the wired ethernet port of the Express. I can see the netcam, which also functions as a web server, on the internal 10.x.x.x address, and have reserved a discrete 10.x.x.x address via the MAC/DHCP reservation function of the Extreme. Just like the older Airport which did this without a hiccup, I should be able to map a port (e.g. 1200) on the public IP to port 80 of the internal 10.x.x.x address, then access the netcam on the internal network from any browser (http://67.x.x.x:1200). My cable modem is just that: no router involved other than the Airport Extreme. I'm using the latest Extreme and Express firmware, and am either missing something with the new Leopard firewall, overlooking something else, or dealing with a product flaw. Any help is appreciated and Happy Holidays.

I have forwarded the port (have tried several different ports actually) in what I think it the correct way: using the Airport Utility, connected to the Airport Extreme, and, under advanced options, selected port mapping, entered the public TCP port of 1200, then the private 10.x.x.x IP address of the netcam (which I can access from the internal network with no problem), coupled with the private TCP port of 80. I then attempt to access the netcam from the Internet by entering http://my cable modem IP address:1200 (or another port to which I've attempted to map). This method worked for two years with the Airport, but, with the Extreme and Leopard (simultaneous transition), I'm stumped. After reading other about other port mapping problems, I reserved an IP address for the netcam based on its MAC with no positive results. I also set the firewall through the Security icon in System Preferences to allow all incoming connections. Thanks for taking the time to respond.

Similar Messages

Port Mapping problem with a Snow Base Station

I wish to enable port mapping with my Airport Snow Base Station. (SBS) I am using an Earthlink Efficient Stream 5667 DSL modem to my SBS. I am running firmware version 4.0.9 and connecting with 10.4.3.
So -- enabling port mapping requires that the IP address on my 10.4.3 computer doesn't change, and that I then map the ports. However, I can not manually assign an IP (say 10.0.1.201) as my 10.4.3 can not connect using either "DHCP with manual address" or "manually" (where the router and subnet mask match the DHCP assignment)
What should I do?

Do not use the "DHCP with manual IP address" - that is a mode not supported by most networking devices on the market.
What you should do: on your Mac, open System Preferences->Network->Show Airport->TCP/IP tab. Select to "configure manually". Then enter the following parameters:
- IP address: 10.0.1.201
- subnet mask: 255.255.255.0
- router/gateway IP: 10.0.1.1
- DNS IP: use either 10.0.1.1, or enter the actual IP address(es) of your ISP's domain name servers

WRV200 port mapping problems.

I did the port mapping to enable direct IP dialing from Linksys PAP2 VoIP adapter. It worked fine, untill I replaced the old router with a new WRV200.
The funny thing is the mapping works for some time, then it stops to work. To bring it back to work I have to restart the WRV200 router.
Everything worked fine with old Digitus DN-11005 router. I did not changed the settings in the PAP2 adapter. And, I used the same port mapping settings with WRV200 router. The PAP2 is set to DHCP and static IP is set through static DHCP client list in WRV200.
The only change from the old Digitus LAN settings is a different subnet IP. The old one was 192.168.123.0 the new one is 192.168.122.0
The direct IP dialing is done through WAN of the local Internet service provider. Both locations had the same Digitus router and PAP2 adapters installed with the same port mapping and PAP2 adapter settings. Now with one router changed to WRV200 the system does not work correctly. It looks like the port mapping in WRV200 stops working in about an hour after last usage of this feature.
Static CP Client Lis

I've been busy playing with the issue. Looks, like it is not the port mapping issue, after all.
The LAN is constructed from the WRV200 router and a Surecom EP-805SX 5 port switch connected to one of the router ports. The PAP2 adapter is connected through the switch.
When the PAP 2 appears to be locked it does not make outside calls, and it does not receive them. SIP registering does not work, as well. So, the communication with Internet does not work. In the same time, I can access the web config page of the PAP adapter. To bring everything back to normal I need to pull out and back in one of the WRV200 LAN port plugs. So, reseting of the whole router is not necesary, because disconnecting one of the LAN ports does the trick. What is bugging me is, it works with any of the 4 LAN ports. It does not have to be the LAN port the PAP2 is connected with.
I've noticed, also, a computer connected to the same switch the PAP is connected with has some problem to communicate with the DHCP server of the WRV200 router, from time to time.

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Mapping problem with Wireless Keyboard and Japanese iPhone

Hi everyone:
This seems to be a slightly obscure question -- at least, I can't find a ready answer for it with the search terms I've tried, possibly because most people don't use this particular accessory with the iPhone.
I have an iPhone 4 that I bought from and use on Softbank, the carrier in Japan, where I live. While visiting the United States recently, I bought an Apple Wireless Keyboard from an Apple retailer. I wanted to carry it with me for use with my iPhone, so I would reliably have a convenient way to access the Internet without being confined to the touchscreen keyboard. (I live in a rural area where WiFi spots are uncommon, but my iPhone's access to Softbank's data network is fairly good and consistent.)
However, to my frustration, I can't use the keyboard due to a mapping problem. The Bluetooth connection is fine -- the iPhone can discover the keyboard. However, the mapping is off: typing "Q" gets me "A," typing "Z" gets me "W", numbers and punctuation are off, etc. The key point: This is NOT a problem with the International Keyboard settings (under the Settings -> General -> Keyboard -> International Keyboards menu). I have the Keyboard setting set to QWERTY, which is the layout of the Apple keyboard; I have tried all the other possibilities, just in case. None of them work. Setting the Keyboard setting to QWERTY does not make the external QWERTY keyboard map correctly.
The rather ironic addendum is this: While on a recent trip to Tokyo, I visited the Apple store in Shibuya and, after concluding the main business of my visit (discussing my MacBook's battery problems with an English-speaking staffer), I took out my iPhone and keyboard and asked him about my mapping problem. He started with the Keyboard menu, tried the same things I had tried, realized they weren't working, and puzzled over the problem for a while. Then he did this: He hit a key combination (I believe) that brought up a menu on the iPhone's screen. "Ah, there's your problem," he said, and selected a new setting. The problem was instantly fixed.
To my chagrin, however, I neglected to write down what "Ken" had done to fix the problem. Argh... I was looking at the iPhone upside-down; I'd already taken up more than half an hour; people were waiting, and I guess, being used to living in the countryside now, that I'm not used to Shibuya crowds any more. Anyway, I didn't take careful notes or ask him to walk me through it, and now I cannot recall or repeat what he did. And I still can't use my keyboard!
Any ideas or advice, anyone? How did "Ken" fix my problem, and how can I repeat it? Much, much appreciated, in advance.

THAT'S IT. Sir, you have solved my problem. Thank you!!
And I feel a little silly; this will doubtless seem to an expert as if it should have been obvious all along. But isn't that always the way in hindsight?
Here's what happened: The key combination I was trying to remember was "Apple/command + space on the hardware keyboard," as you just said above. The "menu" it brings up is, apparently, a list of keyboards. I take it that this list is the same as the list of the "virtual" keyboards on the iPhone? I have never had more than one external keyboard -- the Apple Wireless -- but I do have several keyboards active virtually, as the iPhone in Japan seems to come with both the "Nihongo Ten-key" and the "Nihongo Romaji" keyboards active, and I added several other languages as well.
When I hit "Apple/command + space," this list comes up on the iPhone's touchscreen. Highlighted and checked at the top is "English," just as if it had been selected all along. But nonetheless, when I first turn on and pair my keyboard with the iPhone, I need to perform this key-combination action, as if to "reselect" English, and then the keyboard promptly starts working properly as QWERTY. I can only assume that one of the others had been default-selected before -- presumably one of the Nihongo ones? -- and that this was causing the interference.
Thank you again! You have made me and my wireless keyboard very happy.

XSLT Mapping - problem with prefixes when calling template

Hi all,
I am having a problem with using an XSLT mapping in XI to combine various fields from 2 input messages of different structures into a single output message. I understand that XI puts a wrapper around the 2 input messages so the structure of the XML I am mapping is:
<?xml version="1.0" encoding="UTF-8"?>
<ns2:Messages xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
<ns2:Message1>
<ns:(root of first message)>
</ns:(root of first message)>
</ns2:Message1>
<ns2:Message2>
<ns:(root of second message)>
</ns: (root of second message)>
</ns2:Message2>
</ns2:Messages>
Currently my XSL looks like the following:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge" xmlns:javamap="java:systemDate.CurrentDate" version="2.0">
<xsl:output method="xml" version="1.0" encoding="UTF-8"/>
<xsl:param name="inputparam"/>
<xsl:template match="ns2:Messages">
...<xsl:calltemplate name="FormattingTemplate"/>
</xsl:template>
<xsl:template name="FormattingTemplate">
</xsl:template>
</xsl:stylesheet>
When I test the mapping it works fine until it calls the FormattingTemplate. Then it throws out a "transformer exception" error saying the prefix 'ns2' is not mapped to a namespace.
If anyone could tell me where I am going wrong I would be very grateful.
Thanks,
Mike

Hi Udo,
Thanks for your reply.
When testing the stylesheet locally with XMLSpy, it works fine, but I have just noticed that it adds information in the root tag of the target message as follows:
<(root of target message) xmlns:javamap="java:systemDate.CurrentDate" xmlns:ns="http://example.co.uk/example" xmlns:ns2="http://sap.com/xi/XI/SplitAndMerge">
I checked the root tag of the target message in XI and it does not automatically add this information. Thus I added it in my stylesheet so the information above is projected in the target message, but the same error message appears when the call template function is called. Do you know if I need to somehow add a namespace to templates other than the main one? If so, do you know how I go about doing that?
Thanks,
Mike

Maps Problem with Glitchy Map Display

I've been having a problem with Maps recently. Lately, I've been scrolling across maps and very (very) often I would have a really glitchy layout that looks like this:
http://img137.imageshack.us/img137/442/mapsproblemrr6.png
This occurs on both 3G and WiFi wireless networks.
I've tried rebooting the phone (holding down power button and sliding the slider) and resetting my network settings already.
Any ideas?
Thanks for your help!

Zanneth-,
Does the map ever come into focus, or does it remain distorted? Does this issue occur when using different geographical searches? If so, I would try resetting all settings and then a restore, setting the iPhone up as a new phone.
You could also test installing Google Earth for the iPhone (available on the app store) to see if the same issue occurs as well.
Update and restore error messages on the iPhone and iPod touch
http://support.apple.com/kb/TS1275
Hope this helps,
Raleigh

Map problem with ios6

I have problem with IOS6 Maps is any one knows to downgrade to old IOS5 Maps

Load this map and save it on your Home Screen
https://maps.google.com/

Excel XML map problem with numbers.

Hi Xcelsius gurus,
Once again i need your help.
I use Excel XML maps to get data into my embedded spreadsheet, my data are current year sales per month like below:
115.450,36
220.336,20
189.222,56
200.005,48
just numbers.
After inserting the xml data i am not able to use them. No chart, No list, No gause can present my data. Like there is no data.
I realised that after mapping the XML, spreadsheet's cells showing an error, when i click on error icon there is an option to convert data to number, that fix the problem.
What could i do to solve this issue? Is there any problem with my XML file?
Pease help me with this one, i am confused.

Hi:
   what is your xml file format?
   you can try some ordinary xml format instead, here is a example:
   <?xml version="1.0" encoding="ISO-8859-1"?>
<bookstore>
<book catalog="Programming">
<title lang="en">C++ Programming Language</title>
<author>Bjarne Stroustrup</author>
<year>998</year>
<price>198.0</price>
</book>
<book catalog="Networking">
<title lang="en">TCP/IP Illustrated</title>
<author>Richard Stevens</author>
<year>1996</year>
<price>156.0</price>
</book>
</bookstore>

ThinkPad USB 3.0 dock network port has problems with our Cisco 6509 switch

We purchased a ThinkPad USB 3.0 dock for and X1 carbon and the main issue we are having is the network port does not seem to work with our Cisco 6509 switch. I tried updating the firmware on the dock but it still hasn't fixed the issue. I was wondering if anyone else had run into this problem with any other networks out there.

I'm seeing the same issue with a ThinkPad W520. When I connect my ethernet cable directly to the laptop, my internet speeds are on par with my service provider of 18 Mbps. When I move that cable to the dock, I will only see 1.5 Mbps. I have two displays attached to the dock and I'm running Windows 7. I've updated the dock firmware and have installed the latest system drivers. Is there anything else to try?

Poweredge (Win 2003) port teaming problem with Cat 6509s

Hi
One of our server guys has reported a problem with port teaming his Win 2003 Dell servers (running MS Exchange). He has set them up with an active port attached to 6509-A and a standby port attached to 6509-B. The servers have Broadcom NICs. At times the server is completely unavailable - unable to RDP or telnet and users have complained of poor performance.
Does anyone hae any experience - any info gratefully received.
Regards,
Paul

I'm not so sure CSCsj55739 is the issue. I have a few questions:
1) Can you post a text dump of the Broadcom team config (usually available from the teaming GUI).
2) Are both NICs connected to the same VLAN?
3) Is this same VLAN carried between 6509-A and 6509-B?
4) Have you tried removing the team and putting the team address on one physical NIC at a time, to see if simply one NIC or the other has a connection issue?

Ovi maps problems with Nokia 5800 xpress music

Since Ovi updated the maps I've had trouble using it. I have version 40 firmware which was installed by Vodafone when my device expired. Despite the update, Ovi maps just crashes the phone when I try to use it. The screen goes blank and I get all coloured lines flashing down one side and the phone reluctantly restarts. Any advice please?

I am having exactly the same problem with my 5800 xpress music having updated to version 40.0.005.235.10 and installed the new version of OVI maps and the software Own Voice.
I have also tried reinstalling the sotware, restoring my phone to factory settings and resetting my phone by pressing the green, red and camera button whilst powering up. The problem persists. I will be making a call and within a few seconds of the call being connected the phone switches off and back on again. I also get the the coloured lines flasing on the screen.
Please Nokia Support, help us out.

Keyboard mapping problem with sunstudio

I'm a new sunstudio user and am having trouble with a setup issue. When I run sunstudio 11 from a sunray with a Sun keyboard all works fine (except the sunray has far too small of screen and it drive me crazy). When I run with my linux desktop being the x-server then none of the special keys (home, end, arrows, backbspace, enter, etc.) work correctly in sunstudio. All other gui apps I've tried (gedit, gvim, staroffice, web browser, etc.) work fine from my linux/pc keyboard.
Using google I discovered xev. It shows the keycode and keysym that is interpreted for each keyboard stroke. When I compare the output from my linux/pc keyboard vs. the sun keyboard connected to the sunray I see the expected differences in keycode, but the keysym and resulting interpretation (e.g. BACKSPACE) is the same. Yet sunstudio ignores any keystroke except normal alphabet characters that come from my linux/pc keyboard.
When using my linux/pc keyboard I'm in one of two configs (both act the same):
- ssh -X hostname
OR
- Xephyr :1 -screen 1250x975 -query hostname &
Thanks for any help.
cb

There is a known problem related to control keys in the netbeans GUI.
http://www.genunix.org/wiki/index.php/Sun_Studio_FAQs#IDE_-TheSun_Studio_IDE_is_ignoring_my_control_keys
It's hard to tell from your message where the programs are
executing from.
Run two X programs next to each other, running on the same machine,
and displaying to the same X server. Verify that one of them can see
ALT keys (for example) and the other one can't. Then you know it's
a problem with the application program, and not due to your keyboard.
The Sun Studio IDE has no idea what physical keyboard you're using.
It only sees the keysyms from the X server.

Mapping Problem with IF...Else

HI,
im having problems with my if then else condition.
What i want to have. (ORDERS IDOC)
IF E1EDKA1-PARVW = WE and
    E1EDKA1-LIFNR = "XX" then CONSTANT ("true")
else Constant ("false").
If i use only one E1EDKA1 segment ... it works.
If i use many E1EDKA1 segments and use if without else ... it works.
But i cant get it with if then else. I will allways get the else value.
any ideas ?
Gordon
Message was edited by:
        Gordon Breuer

HI,
<b>In your example data only one true and two false right?</b>
try the below UDF
use parvw - removecontext -- UDF -- split byvalue --target node
use lifnr -- remove context --- /
while creating UDF ---Input parvw,lifnr , select the queue option for User defined function
for (int i =0;i < parvw.length;i++){
if parvw(i).equals("WE") && lifnr(i).equals("xx"){
result.addValue("true");
}else
result.addValue("false");
Note the "true" and "false" are not equal to boolean values do not compare.
Regards
Chilla
reward points...
Message was edited by:
        Chandra Sekhar Chilla

Port Mapping Problem with AEX

Similar Messages

Maybe you are looking for