Port needed for File to File scenario

Hi,
I am new to XI, just got trained and I want to practice file to file scenario. I am able to access ID and IR.
I would like to know whether any port have to be enabled for this scenario????
I got list of ports from the basis people to enable the ports. could you tell me for which scenarios these ports have to be enabled:
Http Port            50000
ABAP Port         8000
Msg server port 3901
SDM Port            50018
File Sharing Port 445
P4 port               50004
Enqueue server port    3201
Dispatcher port        3200
Sql server Port         1433
Anymaterial to regarding port details would also be helpful.
Thanks in advance.
Regards,
Kiruthiga

Hi Kiruthiga ,
I am new to XI, just got trained and I want to practice file to file scenario. I am able to access ID and IR.
I would like to know whether any port have to be enabled for this scenario????
--> Not required ..but you ask for FTP site if want to do file to file scenario using FTP . Default FTP port is 21 though ..
using got list of ports from the basis people to enable the ports.
---> tell them stop sending information which is not required..This is not the way of "Delivering. High Performance. "
could you tell me for which scenarios these ports have to be enabled:
Http Port 50000
ABAP Port 8000
Msg server port 3901
SDM Port 50018
File Sharing Port 445
P4 port 50004
Enqueue server port 3201
Dispatcher port 3200
Sql server Port 1433
Any material to regarding port details would also be helpful.
--> Friend not required...at this point. Though having knowledge is not a harm .
Regards,

Similar Messages

Approach needed for processing huge file.using file-jdbc

Hi,
My Scenario is file-jdbc. I need to update the records in database table. The size of file would be 500mb.
1)Will the recordsets per message in the sender side FCC will help me in processing the file? Any other better solution or any configuration needs to be checked on PI system? as processing should be finished in 3 hours time?
2)i need to update other table with no.of records processed per cycle with time. How to acheive this?
TIA

I would suggest you to go for Stored procedures and follow as mentioned below:
1)Use recordsets per message in the sender side FCC (already mentioned by u)
2) Create a SP and and pass source payload as xml input to the SP.
Ur target structure will be something like this:
http://help.sap.com/saphelp_nw04/helpdata/en/2e/96fd3f2d14e869e10000000a155106/content.htm
<StatementName>
<storedProcedureName action=u201D EXECUTEu201D>
<table>realStoredProcedureeName</table>
<param1 type=SQLDatatype>val1</param1>
</storedProcedureName >
</StatementName>
pass ur source data as xml input to param1.
If u r using PI7.1 then chk this:
http://www.sappi.sapag.co.in/flat-file-to-file-senario/convert-the-input-xml-to-string-in-pi-7-1-using-standard-graphical-mapping-2/
on the database side parse the string (xml document) and then insert the data in the table.. Chk with ur DB team regarding the same.

Ports needed for CiscoWorks managment

I am Instaling AP and I don't know which ports should be opened on switch for communication between Access Point and CiscoWork. For now we open all ports to CiscoWorks station, but we want to cut it as much as its possible. Also we've got problems with configuring CiscoWorks to work with AP (AiroNet1130) now it's working but we arn't sure which options are nessesery - so maybe someone could tell me what is exacly needed for this
Thanks for all replays
Regards
Adam

Here's the official list for CiscoWorks WLSE:
http://www.cisco.com/en/US/customer/products/sw/cscowork/ps3915/products_user_guide_chapter09186a008052db6f.html
I thought I saw a post a while ago about some undocumented ports used by WLSE too, but can't find it at the moment.

Firewall ports needed for remote management?

Hey guys,
Does anyone know the ports needed so that I can remotely connect to other Win7 computer through compmgmt.msc, regedit, msinfo32, remote rsop.msc, etc? I think those are just rpc connections, but not sure. Is it tcp 135?
Thanks,
Dan
Dan Heim

Hi Dan,
Based on my research, remote desktop connections are via RDP instead of RPC, so the ports for Remote Desktop to work, 3389 and 443 are used mostly.
More information for you:
Overview of Remote Desktop Gateway
http://technet.microsoft.com/en-us/library/cc731150.aspx
What ports are used by a RDS deployment?
http://social.technet.microsoft.com/wiki/contents/articles/16164.what-ports-are-used-by-a-rds-deployment.aspx
Getting Remote Desktop to
work thru most firewalls
http://blog.jordanterrell.com/post/Getting-Remote-Desktop-to-work-thru-most-firewalls.aspx
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
How RPC Works
http://technet.microsoft.com/en-us/library/cc738291(v=WS.10).aspx
Best Regards,
Amy Wang

What Network Firewall Ports Needed For Music Store?

My PC is on a network that is firewalled to the the Internet. All ports are blocked except for those explicitely enabled, such as port 25 for E-mail, port 80 for browsing, etc.
When the Windows Firewall is disabled, my PC cannot get past the the Music Store's home page. All links are inoperative.
When I connect my PC to another router/firewall, that bypasses my network's firewall, I can navigate the music store.
I believe I have a blocked port issue when the PC is connected to my network.
Can anyone tell me what Internet/TCP ports I need to have open for the iTunes music store and for QuickTime?
Thanks for the assist.
Regards.

hiya!
Since you say that iTunes is using standard browser ports, then perhaps it's my network's Proxy Server that iTunes doesn't work well with.
it might be worth checking on these possibilities:
iTunes for Windows can't access the Internet if proxy settings are incorrect
... but also see:
iTunes for Windows: Music Store - Using With Internet Filters or Accelerators
love, b

Examples needed for Idoc to file and IDOC to web services

Hi ,
Could any one of you give some examples which take me through step-by-step in building IDOC-TO-FILE and IDOC-TO-WEB SERVICES?
Regards,
XI Developer.

Hi,
For IDOC scenario you need to first do the required configuration:
ALE configuration for pushing idocs from SAP to XI
/people/swaroopa.vishwanath/blog/2007/01/22/ale-configuration-for-pushing-idocs-from-sap-to-xi
Testing purpose u can use the below method:
IDOC testing using WE19
/people/sameer.shadab/blog/2005/07/25/reposting-idocs-instead-of-recreating--for-testing-purpose-xi
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters --> For Idoc sender: IDOC -file
IDOC configuration:
Please follow the below process for configuration:
Pre-requisites for Inbound IDoc to R/3 from PI:
Configuration required at Xi side:
Go to IDX1: configure the port.
Go to IDX2: load the DOC metadata.
Go to SM59: Create RFC destination which points to R3 system this is require in the case where your IDOC is sent to R 3 system,
Configiration required at R3 side:
Maintain Logical System for PI (SALE transaction):
Maintain Partner Profile for XI system(WE20):
Pre-requisites for Outbound IDoc from R/3 to PI:
Configurations required in R/3:
Maintain Logical System (SALE)
Define RFC Destination (SM59) which points to PI system
Maintain Port (WE21)
Maintain partner profile. (WE20):
Maintain Distribution Model (BD64):
File To IDOC - Part1 (SLD and Design):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
File To IDOC - Part2 (Configuration):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
File To IDOC - Part3 (Steps required in XI and R3):
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
SOAP scenario:
YOu have to first create the WSDL through ID and import that WSDL in to IR external definition.
Refer the below thread and pdf:
How to use SOAP adapter:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4
SAP AII - How to consume and expose webservices ?
Thnx
Chirag
reward points if it helps.

Suggestion needed for processing Big Files in Oracle B2B

Hi,
We are doing a feasibility study for Using Oracle AS Integration B2B over TIBCO. We are presently using TIBCO for our B2B transactions. Now since my client company planning to Implement Fusion Middleware (Oracle ESB and Oracle BPEL), we are also looking at Oracle AS Integration B2B for B2B transactions (On other words we are planning to replace TIBCO by Oracle Integration B2B if possible).
I am really concern about one thing that is receiving and processing any "BIG FILE" (15 MB of size) from trading partner.
Present Scenario: One of our trading partner is sending Invoice documents in a single file and that file size can grow upto 15 MB of size. In our existing scenario when we receive such big files from trading partner (through TIBCO Business Connect - BC), Tibco BC works fine for 1 or 2 files but it crashes once it received multiple files of such size. What exactly happening is Whatever Memory that TIBCO BC is consuming to receive one such big file, are not getting released after processing and as a result TIBCO BC throws "OUT OF MEMORY" error after processing some files.
My questions:
     1. How robust the Oracle AS Integration B2B is, in terms of processing such big files?
     2. Is there any upper limit in terms of size that Oracle AS Integration B2B can handle for receiving and processing data?
     3. What is the average time required to receive and process such big file? (Lets say we are talking about 15MB of size).
     4. Is there any documentation availble that talks about any such big files through Oracle B2B?
Please let me know if you need more information.
Thanks in advance.
Regards,
--Kaushik

Hi Ramesh,
Thanks for your comment. We will try to do POC ASAP. I will definitely keep in touch with you during this.
Thanks bunch.
Regards,
--Kaushik

Advice needed for converting AI file to PDF

I'm working on some 11x17 page size illustrator files that are of aerial photo maps (with a legend).
Can someone offer me some advice on how to best convert these files to pdfs and keep the photo quality high and keep the file size as low as I can get it??? I basically can convert it to a pdf but I don’t understand the compression settings section (assuming that’s what needs to be changed in order to accomplish this?).
Thanks

This is a trick I find works well.
Just save it as a pdf and open in Acrobat, then (Acrobat X) go to tools and then Prepare for Web Publishing, use all the default settings.
This should reduce the file as much as 1/3 the size sometimes even more.
It has no effect on the qquality.

Permissions needed for mobile account file sync

Hello,
I have set up my account as mobile account in an AD domain.
When FileSync syncs the files automatically, then I often get errors as follows:
File xyz could not be synced.
Permission denied.
What permissions does FileSync need to work correctly?
Regards
Florian

SCOM Action account does not required to be local administator of agent machine
The action account is used to gather information about, and run responses on, the managed computer (a managed computer being either a management server or a computer with an agent installed). The MonitoringHost.exe processes run under the action account or
a specific Run As account.
You may use local system or domain account for agent action account.
For Domain user agent's action account, you can use a low-privileged account by ensurin that the account have the following minimum privileges:
• Member of the local Users group
• Member of the local Performance Monitor Users group
•“Allow log on locally” permission (SetInteractiveLogonRight)
https://technet.microsoft.com/en-us/library/hh212808.aspx
Roger

Keyboard help needed for spreadsheet / excel files!

When editing a spreadsheet / excel file, how do I keep the keyboard from switching back to numerical mode every time I press the space bar? When entering text into a cell, I need the keyboard to stay locked in alpha mode. I've tried both office hd and quick office, and in each one, every time I write a word and then press the space bar, it automatically goes back into the numerical keyboard mode.

HI
GOOD
http://www.sapbrain.com/FunctionModules/fm_list.html
THIS LINK CONTAINS THE SIMILAR REPORT AS PER YOUR REQUIREMNET.I HOPE THIS WILL HELP YOU TO KNOW DETAILS.
THANKS
MRUTYUN

DA server within a DMZ - ports needed for internal network

Hi,
I'm planning on adding a domain joined DA server in my DMZ. The DA server will have 2 NICs, one for the internal network and the other for the external. I'll be using two consecutive public IPv4 addresses.
On my external firewall I'll be opening the following ports for my DA server:
- Port 443 inbound and outbound
- UDP 3544 inbound and outbound.
On my Juniper firewall between the internal network and DMZ I'll be opening the following bi directional ports between my DC and DA server:
- IP Protocol 41 inbound and outbound.
TCP/UDP 53, 88, 3389, 389, 443, 445, 636, 3268, 3269
Am I right in thinking that in order for my DA clients to reach file shares (for example) I need to ensure that the required protocol and ports are open between my DA server and my file share (i.e. 443)? Doesn't this open a whole load of security holes?
Thanks
IT Support/Everything

Hi there - in a similar scenario on many customer sites i have done the following configurations on the Internal Firewalls
Internal IP of the DA Server ---> allow all traffic to selected VLAN's
The above rule is restricting traffic from the DA Server to the required VLAN's / Networks you specify, The reasoning being is that Direct Access requires full connectivity to your apps / infrastructure.
john davies

Ports needed for a nfs client

Hello -
Which ports on a firewall running on a solaris 10 machine should I open to make it a nfs client? I openned udp/tcp port 111. But it didn't work. The file server is running solaris 9.
Thanks
Rui

If you use the WebNFS feature of Solaris it will only require port 2049, to use WebNFS, simply mount your NFS share as an URI.
For example, replace:
mount server:/share /mountpoint
with
mount nfs://server/share /mountpoint
.. to use WebNFS instead.
.7/M.

Firewall ports needed for rpc error in powershell

In my enviroment we use several different DMZ's to host our servers in. This creates a situation where some of the computers in the domains are in different subnets. I am trying to run a script in one domain in which all the computers are
in the same subnet except for 2. In this case there is a firewall between the two subnets i am describing. When i try and run my script i recieve the error below. I have verified the following ports are open on the firewall.
TCP 5985, 5986, 445, 389    TCP\UDP 135
I have monitored our firewall and the ports being blocked when i run my script are TCP 4754 on one server and 5002 on the other. I believe these are DCOMM ports. What other ports or range of ports, or any other ports, do I need to open to resolve
the RPC error? I do not want to just open a bunch of unneeded ports between my DMZ's. I could just open these 2 ports and resolve the issue for now, but i am trying to make this a powershell friendly enviroment, if you take my meaning. I should mention all
local firewalls are turned off on the servers and the script runs fine on all other servers in the subnet.
Thank You in advance for your help
Get-WmiObject : The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
At C:\Users\jthomas99\Desktop\Get-IPDetails.ps1:14 char:16
+    $Networks = Get-WmiObject Win32_NetworkAdapterConfiguration -ComputerName $Co ...
+                ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidOperation: (:) [Get-WmiObject], COMException
    + FullyQualifiedErrorId : GetWMICOMException,Microsoft.PowerShell.Commands.GetWmiObjectCommand
Thanks for your help

Here is the DCOM firewall configuration document. It should be given to your firewall admins and they need to pay special attention to setting up the DCOM port forwarding rules.
http://support.microsoft.com/kb/154596/en-us
There are also instructions on how to configure DCOM ports to work with WAN/Internet access issues.
If you are looking to obtain remote management over a WAN or the Internet you can and should set up WMF as it can be run over a fully encrypted HTTPS port and it does not require odd dynamic port allocation
as does RPC.
You can also set up PowerShell Web Service which does not require dynamic ports and can be routed over any port. It uses the browser to open a PowerShell session on a remote server that can have delegated access to other servers. DCOM cannot
do this without making many dangerous changes t your network.
http://technet.microsoft.com/en-us/library/hh831611.aspx
¯\_(ツ)_/¯

Additional firewire port needed for Canopus

I have always used a Canopus to change analog video as I download onto my Mac G5 for video editing in iMovie. I recently replaced one that quit on me and now new one is not working right. Both analog and digital lights stay on, rather than one or the other depending on my need. I took it back and exchanged thinking it was broken. The second one did the same thing. Apple store said to try the firewire in the back of the tower as front one may not be working. I do not have one in the back that is not in use. Anyone have any advice?

You could try using a firewire hub like [this one|http://www.amazon.com/gp/product/B0006BHCEK].
Capturing video using a hub is not really recommended, but at least you would be able to leave everything connected, and do some troubleshooting.

Open ports needed for remote hd login

what ports should i have open to remotely connect to my AEBS external hard drive??

The following worked for me to access my airdisk via inet
1: Set the AE to bridging modus
2: If you have a firewall active, you have to forward port TCP 548 (afp) to the internal IP address of your AE. You can see the IP in the main screen of the airport utility program. It has the format 192.168.1.xx or 10.1.1.xx.
3: Figure out your external ip address -There's widgets that do that, e.g. iStat Nano-
You can access the airdisk as follows:
Open finder
Press command-k or select 'Connect to server' from the 'Go' menu.
Type afp://external ip/name of your airdisk
example: afp://86.354.32.45/MyDisk
And click connect.
Note: You must be connected to the inet from another location than yours, otherwise it won't connect.
That's it
Marc

Port needed for File to File scenario

Similar Messages

Maybe you are looking for