Port out of range:-1

Hi ,
I am trying to create a connection pool on Sun java application server 8.2 and when I ping by clicking on "ping" in the Admin console on Connectionpool creation window, I get following error , I am connecting a sybase server running on port 4100.
"Operation 'pingConnectionPool' failed in 'resources' Config Mbean. Target exception message: port out of range:-1"
Does anyone why am I getting this error and how can this be fixed ?
Thanks,
Nitin

I am getting the same thing in a different area. I converted the following program to use DatagramChannel....
http://java.sun.com/docs/books/tutorial/networking/datagrams/clientServer.htm
and now I get the same error. Anyone know why?
dean

Similar Messages

  • Chartread: Error - icoms - usb_is_usb_portno: port number out of range!

    Hello.  This is the error I get on my iMac Lion using an i1Pro spectrometer and the latest Argyll ICC software.  Chartread is the sub program for reading printed color targets.
    chartread: Error - icoms - usb_is_usb_portno: port number out of range!   
    Q. 1 I can't figure out how to fix this and I have no X-Rite software remaining on my computer. 
    Q. 2 How do I get a list of usb devices (in terminal?) and if I can do that can I assign a new number to that device?
    Regards
    Mark MacKenzie

    Without the KVM the results are the same, except that using the fallback grub entry shows the console but X fails to start
    (EE) intel(0): No kernel modesetting driver detected.
    (II) UnloadModule: "intel"
    (EE) Screen(s) found, but none have a usable configuration.
    The same happens if I load the i915 module
    MODULES=(i915 !vesafb !uvesafb !vboxdrv)
    If I load the i915 and use
    kernel /boot/vmlinuz26 root=/dev/sda2 ro vga=795 i915.modeset=1
    the console still is unusable, but X boots
    And I still see the
    fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
    Last edited by noalwin (2009-12-28 12:38:51)

  • Asus vh232h out of range, Mac mini thunderbolt to vga

    Hey guys,
    Pretty much what the title says.....
    Mac mini
    Asus vh232h (VGA only, no dvi socket)
    Thunderbolt to VGA adapter
    VGA cable (I've tried several)
    (Benq monitor running fine on the hdmi port)
    In short, if I use a VGA cable under 1.8m, there's no problem.
    If I use a cable of 3m in length, or two x 1.8m cables, I get a "Out of range" message on the monitor.
    (My office is shared space, so I need the Mac mini to be inside a lockable cupboard.  That means I need a cable longer than 1.8m)
    FYI, I don't seem to be able to set the asus monitor resolution in Mac settings (not sure if it can be done when monitor is 'out of range', but I can see the Asus in Display settings, Arrangement. It looks about half the width and height of the benq.
    Is a monitor supposed to connect successfully over a 3 m cable?
    Will a thunderbolt to dvi adapter work? (Would have to buy new monitor)
    Any other ideas?
    Thanks,
    Darren

    Bought a new benq 24" monitor, moshi mini display port to hdmi adapter, and 5m hdmi cable.
    Sorted.
    Must be an issue with apple mdp to VGA adapter when using VGA cables over 1.8m long.

  • Macs Won't Forget Refresh Rate - LCD Refresh Out of Range

    I have a new Viewsonic LCD for an old G4. I had to use an ADC to DVI adapter.
    The first time I booted up my Mac, the monitor worked fine. I went into the Display Preferences and, like an idiot, I selected 90 hz because, like an idiot, I thought 90 hz was better than 60 hz.
    My screen went black and the monitor said "Frequency out of range", etc. I have talked to AppleCare and I have tried everything and nothing I do gets this Mac to revert to 60 hz at 1280 x 1024.
    Tried zapping PRAM, didn't work.
    Tried booting into Safe Mode and selecting another resolution. I do that, reboot, it reboots in that lower resolution. I select 1280 x 1024 and my screen goes black because it's going into that 90 hz.
    Created another account, didn't work.
    I plugged in my old CRT into the VGA port. I was able to select 1280 x 1024 at 60 hz. Turned off the Mac. Plugged in the LCD. Turned the Mac back on and it went black.
    It does this when you log in. The actual bootup is in 1280 x 1024 60 hz. I get the login screen fine. It's when I log in, into any account, it goes back to that 90 hz mode.
    In Windows, if you select a resolution or refresh rate, a dialog comes up asking you if this mode is OK and if after 15 seconds you don't click on anything, it reverts back to the original resolution. Apple doesn't want to do that, I guess, because they want me to use their monitors.
    Any ideas?
    Thanks!

    You should probably just trash the preferences file(s). That will give you a fresh start with the Viewsonic. See this thread:
    http://discussions.apple.com/thread.jspa?messageID=3308488&#3308488

  • Xen Kernel randomly fails to load and goes out of range

    Been having an on/off issue lately that requires a hard reset of my system.  Essentially what happens is the system begins to load when my monitor reports an error that the signal is out of range.  I try to pretend login and reboot, but it does not work.  Instead, I am forced to simply reset the system and once reset it appears to boot OK without any issues.  In fact I can go a few reboots before once again it decides to break.  Below is what should be one of the logs from a failed boot, in fact, the system is in this same failed state right now as well.
    arch_1 ~ :( # journalctl -b -1
    -- Logs begin at Sat 2013-12-28 00:39:50 EST, end at Thu 2014-01-02 23:28:03 EST. --
    Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 332.0K (max 91.3M, leaving 137.0M of fre
    Jan 02 23:22:36 arch_1 systemd-journal[129]: Runtime journal is using 336.0K (max 91.3M, leaving 137.0M of fre
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuset
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpu
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys cpuacct
    Jan 02 23:22:36 arch_1 kernel: Linux version 3.12.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.8.2 (GCC) ) #1 SM
    Jan 02 23:22:36 arch_1 kernel: Command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console=tty0
    Jan 02 23:22:36 arch_1 kernel: Freeing 9e-100 pfn range: 98 pages freed
    Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on 9e->100
    Jan 02 23:22:36 arch_1 kernel: 1-1 mapping on bd9ff->100000
    Jan 02 23:22:36 arch_1 kernel: Released 98 pages of unused memory
    Jan 02 23:22:36 arch_1 kernel: Set 271971 page(s) to 1-1 mapping
    Jan 02 23:22:36 arch_1 kernel: Populating 80000-80062 pfn range: 98 pages added
    Jan 02 23:22:36 arch_1 kernel: e820: BIOS-provided physical RAM map:
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000000000-0x000000000009dfff] usable
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000000a0000-0x00000000000fffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000000100000-0x00000000bd9fefff] usable
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bd9ffc00-0x00000000bda53bff] ACPI NVS
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda53c00-0x00000000bda55bff] ACPI data
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000bda55c00-0x00000000bfffffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fec00000-0x00000000fed003ff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fed20000-0x00000000fed9ffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000fee00000-0x00000000feefffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
    Jan 02 23:22:36 arch_1 kernel: Xen: [mem 0x0000000100000000-0x0000000237ffffff] usable
    Jan 02 23:22:36 arch_1 kernel: NX (Execute Disable) protection: active
    Jan 02 23:22:36 arch_1 kernel: SMBIOS 2.5 present.
    Jan 02 23:22:36 arch_1 kernel: DMI: Dell Inc. OptiPlex 960 /0Y958C, BIOS A10 12/20/2010
    Jan 02 23:22:36 arch_1 kernel: e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    Jan 02 23:22:36 arch_1 kernel: e820: remove [mem 0x000a0000-0x000fffff] usable
    Jan 02 23:22:36 arch_1 kernel: No AGP bridge found
    Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0x238000 max_arch_pfn = 0x400000000
    Jan 02 23:22:36 arch_1 kernel: e820: last_pfn = 0xbd9ff max_arch_pfn = 0x400000000
    Jan 02 23:22:36 arch_1 kernel: Scanning 1 areas for low memory corruption
    Jan 02 23:22:36 arch_1 kernel: Base memory trampoline at [ffff880000098000] 98000 size 24576
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00000000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x00000000-0x000fffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7fe00000-0x7fffffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x7fe00000-0x7fffffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b47000, 0x01b47fff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b48000, 0x01b48fff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x7c000000-0x7fdfffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x7c000000-0x7fdfffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b49000, 0x01b49fff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4a000, 0x01b4afff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4b000, 0x01b4bfff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: BRK [0x01b4c000, 0x01b4cfff] PGTABLE
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x00100000-0x7bffffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x00100000-0x7bffffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x80000000-0xbd9fefff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x80000000-0xbd9fefff] page 4k
    Jan 02 23:22:36 arch_1 kernel: init_memory_mapping: [mem 0x100000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: [mem 0x100000000-0x237ffffff] page 4k
    Jan 02 23:22:36 arch_1 kernel: RAMDISK: [mem 0x01f54000-0x029fefff]
    Jan 02 23:22:36 arch_1 kernel: ACPI: RSDP 00000000000fec00 00024 (v02 DELL )
    Jan 02 23:22:36 arch_1 kernel: ACPI: XSDT 00000000000fc7d7 00084 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: FACP 00000000000fc907 000F4 (v03 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: DSDT 00000000ffe9e423 05744 (v01 DELL dt_ex 00001000 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: FACS 00000000bd9ffc00 00040
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000ffea3d30 00087 (v01 DELL st_ex 00001000 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: APIC 00000000000fc9fb 00092 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: BOOT 00000000000fca8d 00028 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: ASF! 00000000000fcab5 00096 (v32 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: MCFG 00000000000fcb4b 0003C (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: HPET 00000000000fcb87 00038 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: TCPA 00000000000fcde3 00032 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: DMAR 00000000000fce15 00108 (v01 DELL B10K 00000015 ASL 00000061)
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bd9ffc40 001F9 (v01 DpgPmm Cpu0Ist 00000011 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00049 001F9 (v01 DpgPmm Cpu1Ist 00000011 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: SSDT 00000000bda00452 00190 (v01 DpgPmm CpuPm 00000010 INTL 20050624)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
    Jan 02 23:22:36 arch_1 kernel: NUMA turned off
    Jan 02 23:22:36 arch_1 kernel: Faking a node at [mem 0x0000000000000000-0x0000000237ffffff]
    Jan 02 23:22:36 arch_1 kernel: Initmem setup node 0 [mem 0x00000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: NODE_DATA [mem 0x7f0c7000-0x7f0cbfff]
    Jan 02 23:22:36 arch_1 kernel: Zone ranges:
    Jan 02 23:22:36 arch_1 kernel: DMA [mem 0x00001000-0x00ffffff]
    Jan 02 23:22:36 arch_1 kernel: DMA32 [mem 0x01000000-0xffffffff]
    Jan 02 23:22:36 arch_1 kernel: Normal [mem 0x100000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: Movable zone start for each node
    Jan 02 23:22:36 arch_1 kernel: Early memory node ranges
    Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00001000-0x0009dfff]
    Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x00100000-0xbd9fefff]
    Jan 02 23:22:36 arch_1 kernel: node 0: [mem 0x100000000-0x237ffffff]
    Jan 02 23:22:36 arch_1 kernel: On node 0 totalpages: 2054556
    Jan 02 23:22:36 arch_1 kernel: DMA zone: 64 pages used for memmap
    Jan 02 23:22:36 arch_1 kernel: DMA zone: 21 pages reserved
    Jan 02 23:22:36 arch_1 kernel: DMA zone: 3997 pages, LIFO batch:0
    Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 12072 pages used for memmap
    Jan 02 23:22:36 arch_1 kernel: DMA32 zone: 772607 pages, LIFO batch:31
    Jan 02 23:22:36 arch_1 kernel: Normal zone: 19968 pages used for memmap
    Jan 02 23:22:36 arch_1 kernel: Normal zone: 1277952 pages, LIFO batch:31
    Jan 02 23:22:36 arch_1 kernel: ACPI: PM-Timer IO Port: 0x808
    Jan 02 23:22:36 arch_1 kernel: ACPI: Local APIC address 0xfee00000
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled)
    Jan 02 23:22:36 arch_1 kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
    Jan 02 23:22:36 arch_1 kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    Jan 02 23:22:36 arch_1 kernel: IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    Jan 02 23:22:36 arch_1 kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ0 used by override.
    Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ2 used by override.
    Jan 02 23:22:36 arch_1 kernel: ACPI: IRQ9 used by override.
    Jan 02 23:22:36 arch_1 kernel: Using ACPI (MADT) for SMP configuration information
    Jan 02 23:22:36 arch_1 kernel: ACPI: HPET id: 0x8086a701 base: 0xfed00000
    Jan 02 23:22:36 arch_1 kernel: smpboot: Allowing 8 CPUs, 6 hotplug CPUs
    Jan 02 23:22:36 arch_1 kernel: nr_irqs_gsi: 40
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbd9ff000-0xbd9fffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda00000-0xbda52fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda53000-0xbda53fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda54000-0xbda54fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda55000-0xbda55fff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xbda56000-0xbfffffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfec00000-0xfecfffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed00000-0xfed1ffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfeda0000-0xfedfffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xfef00000-0xffafffff]
    Jan 02 23:22:36 arch_1 kernel: PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
    Jan 02 23:22:36 arch_1 kernel: e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
    Jan 02 23:22:36 arch_1 kernel: Booting paravirtualized kernel on Xen
    Jan 02 23:22:36 arch_1 kernel: Xen version: 4.3.1 (preserve-AD)
    Jan 02 23:22:36 arch_1 kernel: setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    Jan 02 23:22:36 arch_1 kernel: PERCPU: Embedded 29 pages/cpu @ffff88007ee00000 s86464 r8192 d24128 u262144
    Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: s86464 r8192 d24128 u262144 alloc=1*2097152
    Jan 02 23:22:36 arch_1 kernel: pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    Jan 02 23:22:36 arch_1 kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2022431
    Jan 02 23:22:36 arch_1 kernel: Policy zone: Normal
    Jan 02 23:22:36 arch_1 kernel: Kernel command line: /vmlinuz-linux root=/dev/mapper/vg_arch-lv_root rw console
    Jan 02 23:22:36 arch_1 kernel: PID hash table entries: 4096 (order: 3, 32768 bytes)
    Jan 02 23:22:36 arch_1 kernel: xsave: enabled xstate_bv 0x3, cntxt size 0x240
    Jan 02 23:22:36 arch_1 kernel: software IO TLB [mem 0x72a00000-0x76a00000] (64MB) mapped at [ffff880072a00000-
    Jan 02 23:22:36 arch_1 kernel: Memory: 1857868K/8218224K available (5124K kernel code, 807K rwdata, 1628K roda
    Jan 02 23:22:36 arch_1 kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    Jan 02 23:22:36 arch_1 kernel: Preemptible hierarchical RCU implementation.
    Jan 02 23:22:36 arch_1 kernel: RCU dyntick-idle grace-period acceleration is enabled.
    Jan 02 23:22:36 arch_1 kernel: Dump stacks of tasks blocking RCU-preempt GP.
    Jan 02 23:22:36 arch_1 kernel: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
    Jan 02 23:22:36 arch_1 kernel: NR_IRQS:8448 nr_irqs:512 16
    Jan 02 23:22:36 arch_1 kernel: xen: sci override: global_irq=9 trigger=0 polarity=0
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 9 triggering 0 polarity 0
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=9 -> irq=9 (gsi=9)
    Jan 02 23:22:36 arch_1 kernel: xen: acpi sci 9
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=1 -> irq=1 (gsi=1)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=2 -> irq=2 (gsi=2)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=3 -> irq=3 (gsi=3)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=4 -> irq=4 (gsi=4)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=5 -> irq=5 (gsi=5)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=6 -> irq=6 (gsi=6)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=7 -> irq=7 (gsi=7)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=8 -> irq=8 (gsi=8)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=10 -> irq=10 (gsi=10)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=11 -> irq=11 (gsi=11)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=12 -> irq=12 (gsi=12)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=13 -> irq=13 (gsi=13)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=14 -> irq=14 (gsi=14)
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=15 -> irq=15 (gsi=15)
    Jan 02 23:22:36 arch_1 kernel: Console: colour VGA+ 80x25
    Jan 02 23:22:36 arch_1 kernel: console [tty0] enabled
    Jan 02 23:22:36 arch_1 kernel: allocated 33030144 bytes of page_cgroup
    Jan 02 23:22:36 arch_1 kernel: please try 'cgroup_disable=memory' option if you don't want memory cgroups
    Jan 02 23:22:36 arch_1 kernel: Xen: using vcpuop timer interface
    Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 0
    Jan 02 23:22:36 arch_1 kernel: tsc: Detected 2992.224 MHz processor
    Jan 02 23:22:36 arch_1 kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 5986
    Jan 02 23:22:36 arch_1 kernel: pid_max: default: 32768 minimum: 301
    Jan 02 23:22:36 arch_1 kernel: Security Framework initialized
    Jan 02 23:22:36 arch_1 kernel: AppArmor: AppArmor disabled by boot time parameter
    Jan 02 23:22:36 arch_1 kernel: Yama: becoming mindful.
    Jan 02 23:22:36 arch_1 kernel: Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    Jan 02 23:22:36 arch_1 kernel: Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    Jan 02 23:22:36 arch_1 kernel: Mount-cache hash table entries: 256
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys memory
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys devices
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys freezer
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys net_cls
    Jan 02 23:22:36 arch_1 kernel: Initializing cgroup subsys blkio
    Jan 02 23:22:36 arch_1 kernel: CPU: Physical Processor ID: 0
    Jan 02 23:22:36 arch_1 kernel: CPU: Processor Core ID: 0
    Jan 02 23:22:36 arch_1 kernel: mce: CPU supports 2 MCE banks
    Jan 02 23:22:36 arch_1 kernel: Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift: -1
    Jan 02 23:22:36 arch_1 kernel: Freeing SMP alternatives memory: 20K (ffffffff819e9000 - ffffffff819ee000)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Core revision 20130725
    Jan 02 23:22:36 arch_1 kernel: ACPI: All ACPI Tables successfully acquired
    Jan 02 23:22:36 arch_1 kernel: ftrace: allocating 20318 entries in 80 pages
    Jan 02 23:22:36 arch_1 kernel: Performance Events: unsupported p6 CPU model 23 no PMU driver, software events
    Jan 02 23:22:36 arch_1 kernel: NMI watchdog: disabled (cpu0): hardware events not enabled
    Jan 02 23:22:36 arch_1 kernel: installing Xen timer for CPU 1
    Jan 02 23:22:36 arch_1 kernel: Brought up 2 CPUs
    Jan 02 23:22:36 arch_1 kernel: devtmpfs: initialized
    Jan 02 23:22:36 arch_1 kernel: PM: Registering ACPI NVS region [mem 0xbd9ffc00-0xbda53bff] (344064 bytes)
    Jan 02 23:22:36 arch_1 kernel: xen:grant_table: Grant tables using version 2 layout
    Jan 02 23:22:36 arch_1 kernel: Grant table initialized
    Jan 02 23:22:36 arch_1 kernel: RTC time: 4:22:33, date: 01/03/14
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 16
    Jan 02 23:22:36 arch_1 kernel: ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PCI registered
    Jan 02 23:22:36 arch_1 kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base
    Jan 02 23:22:36 arch_1 kernel: PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    Jan 02 23:22:36 arch_1 kernel: PCI: Using configuration type 1 for base access
    Jan 02 23:22:36 arch_1 kernel: dmi type 0xB1 record - unknown flag
    Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-0> at 0
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Module Device)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Device)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Added _OSI(Processor Aggregator Device)
    Jan 02 23:22:36 arch_1 kernel: ACPI: EC: Look up EC in DSDT
    Jan 02 23:22:36 arch_1 kernel: [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    Jan 02 23:22:36 arch_1 kernel: ACPI BIOS Warning (bug): Incorrect checksum in table [TCPA] - 0x00, should be 0
    Jan 02 23:22:36 arch_1 kernel: ACPI: Interpreter enabled
    Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hw
    Jan 02 23:22:36 arch_1 kernel: ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20130725/hw
    Jan 02 23:22:36 arch_1 kernel: ACPI: (supports S0 S1 S4 S5)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Using IOAPIC for interrupt routing
    Jan 02 23:22:36 arch_1 kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and rep
    Jan 02 23:22:36 arch_1 kernel: ACPI: ACPI Dock Station Driver: 1 docks/bays found
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
    Jan 02 23:22:36 arch_1 kernel: acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only par
    Jan 02 23:22:36 arch_1 kernel: PCI host bridge to bus 0000:00
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [bus 00-ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000effff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfec00000]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xbdb00000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff980000-0xff980fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff97c000-0xff97ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda6000-0xfeda6fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: root bus resource [mem 0xfeda7000-0xfeda7fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:00.0: [8086:2e10] type 00 class 0x060000
    Jan 02 23:22:36 arch_1 kernel: DMAR: Forcing write-buffer flush capability
    Jan 02 23:22:36 arch_1 kernel: DMAR: Disabling IOMMU for graphics on this chipset
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: [8086:2e11] type 01 class 0x060400
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: [8086:2e12] type 00 class 0x030000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x10: [mem 0xf7c00000-0xf7ffffff 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: reg 0x20: [io 0xecb0-0xecb7]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: [8086:2e13] type 00 class 0x038000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.1: reg 0x10: [mem 0xf7b00000-0xf7bfffff 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: [8086:2e14] type 00 class 0x078000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: reg 0x10: [mem 0xfeda6000-0xfeda600f 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: [8086:2e16] type 00 class 0x010185
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x10: [io 0xfe80-0xfe87]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x14: [io 0xfe90-0xfe93]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x18: [io 0xfea0-0xfea7]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x1c: [io 0xfeb0-0xfeb3]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.2: reg 0x20: [io 0xfef0-0xfeff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: [8086:2e17] type 00 class 0x070002
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x10: [io 0xecb8-0xecbf]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:03.3: reg 0x14: [mem 0xf7adc000-0xf7adcfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: [8086:10de] type 00 class 0x020000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x10: [mem 0xf7ae0000-0xf7afffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x14: [mem 0xf7add000-0xf7addfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: reg 0x18: [io 0xece0-0xecff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: [8086:3a67] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: reg 0x20: [io 0xff20-0xff3f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: [8086:3a68] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: reg 0x20: [io 0xff00-0xff1f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.1: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: [8086:3a69] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: reg 0x20: [io 0xfc00-0xfc1f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.2: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: [8086:3a6c] type 00 class 0x0c0320
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: reg 0x10: [mem 0xf7ade000-0xf7ade3ff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: [8086:3a70] type 01 class 0x060400
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: [8086:3a72] type 01 class 0x060400
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: [8086:3a64] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: reg 0x20: [io 0xff80-0xff9f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: [8086:3a65] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: reg 0x20: [io 0xff60-0xff7f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.1: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: [8086:3a66] type 00 class 0x0c0300
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: reg 0x20: [io 0xff40-0xff5f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.2: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: [8086:3a6a] type 00 class 0x0c0320
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: reg 0x10: [mem 0xff980000-0xff9803ff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: System wakeup disabled by ACPI
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.0: [8086:3a14] type 00 class 0x060100
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: [8086:3a02] type 00 class 0x010601
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x10: [io 0xfe00-0xfe07]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x14: [io 0xfe10-0xfe13]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x18: [io 0xfe20-0xfe27]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x1c: [io 0xfe30-0xfe33]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x20: [io 0xfec0-0xfedf]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: reg 0x24: [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.2: PME# supported from D3hot
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: [8086:3a60] type 00 class 0x0c0500
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x10: [mem 0xf7adf000-0xf7adf0ff 64bit]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1f.3: reg 0x20: [io 0x0940-0x095f]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: [8086:105e] type 00 class 0x020000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x10: [mem 0xf7880000-0xf789ffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x14: [mem 0xf78a0000-0xf78bffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x18: [io 0xdcc0-0xdcdf]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: reg 0x30: [mem 0xf7900000-0xf791ffff pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: [8086:105e] type 00 class 0x020000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x10: [mem 0xf78c0000-0xf78dffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x14: [mem 0xf78e0000-0xf78fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: reg 0x18: [io 0xdce0-0xdcff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: [1102:0007] type 00 class 0x040100
    Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: reg 0x10: [io 0xcce0-0xccff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:04:00.0: supports D1 D2
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04] (subtractive decode)
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000effff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfc000000-0xfec00000] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xbdb00000-0xf7ffffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff980000-0xff980fff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff97c000-0xff97ffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xff970000-0xff9707ff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfed20000-0xfed9ffff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda6000-0xfeda6fff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [mem 0xfeda7000-0xfeda7fff] (subtractive deco
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
    Jan 02 23:22:36 arch_1 kernel: ACPI: Enabled 2 GPEs in block 00 to 3F
    Jan 02 23:22:36 arch_1 kernel: ACPI: \_SB_.PCI0: notify handler is installed
    Jan 02 23:22:36 arch_1 kernel: Found 1 acpi root devices
    Jan 02 23:22:36 arch_1 kernel: xen:balloon: Initialising balloon driver
    Jan 02 23:22:36 arch_1 kernel: xen_balloon: Initialising balloon driver
    Jan 02 23:22:36 arch_1 kernel: vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    Jan 02 23:22:36 arch_1 kernel: vgaarb: loaded
    Jan 02 23:22:36 arch_1 kernel: vgaarb: bridge control possible 0000:00:02.0
    Jan 02 23:22:36 arch_1 kernel: PCI: Using ACPI for IRQ routing
    Jan 02 23:22:36 arch_1 kernel: PCI: pci_cache_line_size set to 64 bytes
    Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
    Jan 02 23:22:36 arch_1 kernel: Expanded resource reserved due to conflict with PCI Bus 0000:00
    Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
    Jan 02 23:22:36 arch_1 kernel: e820: reserve RAM buffer [mem 0xbd9ff000-0xbfffffff]
    Jan 02 23:22:36 arch_1 kernel: NetLabel: Initializing
    Jan 02 23:22:36 arch_1 kernel: NetLabel: domain hash size = 128
    Jan 02 23:22:36 arch_1 kernel: NetLabel: protocols = UNLABELED CIPSOv4
    Jan 02 23:22:36 arch_1 kernel: NetLabel: unlabeled traffic allowed by default
    Jan 02 23:22:36 arch_1 kernel: Switched to clocksource xen
    Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI init
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP registered
    Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0800-0x085f] could not be reserved
    Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0c00-0x0c7f] has been reserved
    Jan 02 23:22:36 arch_1 kernel: system 00:00: [io 0x0860-0x08ff] has been reserved
    Jan 02 23:22:36 arch_1 kernel: system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp 00:01: [dma 4]
    Jan 02 23:22:36 arch_1 kernel: pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 13 triggering 1 polarity 0
    Jan 02 23:22:36 arch_1 kernel: pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 8 triggering 1 polarity 0
    Jan 02 23:22:36 arch_1 kernel: pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 6 triggering 1 polarity 0
    Jan 02 23:22:36 arch_1 kernel: pnp 00:05: [dma 2]
    Jan 02 23:22:36 arch_1 kernel: pnp 00:05: Plug and Play ACPI device, IDs PNP0700 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
    Jan 02 23:22:36 arch_1 kernel: pnp: PnP ACPI: found 7 devices
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type PNP unregistered
    Jan 02 23:22:36 arch_1 kernel: PM-Timer failed consistency check (0xffffff) - aborting.
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_si
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 15: assigned [mem 0xfc000000-0xfc1fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 15: assigned [mem 0xfc200000-0xfc3fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: PCI bridge to [bus 01]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:01.0: bridge window [mem 0xf7800000-0xf79fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: PCI bridge to [bus 02]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xf7700000-0xf77fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: PCI bridge to [bus 03]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xf7600000-0xf76fffff]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1c.1: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: PCI bridge to [bus 04]
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000effff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 8 [mem 0x000f0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfec00000]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 10 [mem 0xbdb00000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 11 [mem 0xff980000-0xff980fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 12 [mem 0xff97c000-0xff97ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 13 [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 14 [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 15 [mem 0xfeda6000-0xfeda6fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:00: resource 16 [mem 0xfeda7000-0xfeda7fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:01: resource 1 [mem 0xf7800000-0xf79fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 1 [mem 0xf7700000-0xf77fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:02: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 1 [mem 0xf7600000-0xf76fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:03: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 7 [mem 0x000c0000-0x000effff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 8 [mem 0x000f0000-0x000fffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 9 [mem 0xfc000000-0xfec00000]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 10 [mem 0xbdb00000-0xf7ffffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 11 [mem 0xff980000-0xff980fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 12 [mem 0xff97c000-0xff97ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 13 [mem 0xff970000-0xff9707ff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 14 [mem 0xfed20000-0xfed9ffff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 15 [mem 0xfeda6000-0xfeda6fff]
    Jan 02 23:22:36 arch_1 kernel: pci_bus 0000:04: resource 16 [mem 0xfeda7000-0xfeda7fff]
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 2
    Jan 02 23:22:36 arch_1 kernel: TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
    Jan 02 23:22:36 arch_1 kernel: TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    Jan 02 23:22:36 arch_1 kernel: TCP: Hash tables configured (established 65536 bind 65536)
    Jan 02 23:22:36 arch_1 kernel: TCP: reno registered
    Jan 02 23:22:36 arch_1 kernel: UDP hash table entries: 4096 (order: 5, 131072 bytes)
    Jan 02 23:22:36 arch_1 kernel: UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 1
    Jan 02 23:22:36 arch_1 kernel: pci 0000:00:02.0: Boot video device
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=16 -> irq=16 (gsi=16)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=17 -> irq=17 (gsi=17)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=22 -> irq=22 (gsi=22)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=23 -> irq=23 (gsi=23)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: xen: --> pirq=18 -> irq=18 (gsi=18)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
    Jan 02 23:22:36 arch_1 kernel: PCI: CLS 64 bytes, default 64
    Jan 02 23:22:36 arch_1 kernel: Unpacking initramfs...
    Jan 02 23:22:36 arch_1 kernel: Freeing initrd memory: 10924K (ffff880001f54000 - ffff8800029ff000)
    Jan 02 23:22:36 arch_1 kernel: Simple Boot Flag at 0x7a set to 0x1
    Jan 02 23:22:36 arch_1 kernel: Scanning for low memory corruption every 60 seconds
    Jan 02 23:22:36 arch_1 kernel: audit: initializing netlink socket (disabled)
    Jan 02 23:22:36 arch_1 kernel: type=2000 audit(1388722954.276:1): initialized
    Jan 02 23:22:36 arch_1 kernel: HugeTLB registered 2 MB page size, pre-allocated 0 pages
    Jan 02 23:22:36 arch_1 kernel: zbud: loaded
    Jan 02 23:22:36 arch_1 kernel: VFS: Disk quotas dquot_6.5.2
    Jan 02 23:22:36 arch_1 kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Jan 02 23:22:36 arch_1 kernel: msgmni has been set to 3650
    Jan 02 23:22:36 arch_1 kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    Jan 02 23:22:36 arch_1 kernel: io scheduler noop registered
    Jan 02 23:22:36 arch_1 kernel: io scheduler deadline registered
    Jan 02 23:22:36 arch_1 kernel: io scheduler cfq registered (default)
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Jan 02 23:22:36 arch_1 kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    Jan 02 23:22:36 arch_1 kernel: intel_idle: does not run on family 6 model 23
    Jan 02 23:22:36 arch_1 kernel: GHES: HEST is not enabled!
    Jan 02 23:22:36 arch_1 kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: 0000:00:03.3: ttyS0 at I/O 0xecb8 (irq = 17, base_baud = 115200) is a 16550A
    Jan 02 23:22:36 arch_1 kernel: hpet_acpi_add: no address or irqs in _CRS
    Jan 02 23:22:36 arch_1 kernel: Linux agpgart interface v0.103
    Jan 02 23:22:36 arch_1 kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
    Jan 02 23:22:36 arch_1 kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
    Jan 02 23:22:36 arch_1 kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
    Jan 02 23:22:36 arch_1 kernel: mousedev: PS/2 mouse device common for all mice
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: RTC can wake from S4
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: alarms up to one day, 242 bytes nvram
    Jan 02 23:22:36 arch_1 kernel: drop_monitor: Initializing network drop monitor service
    Jan 02 23:22:36 arch_1 kernel: TCP: cubic registered
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 10
    Jan 02 23:22:36 arch_1 kernel: NET: Registered protocol family 17
    Jan 02 23:22:36 arch_1 kernel: Key type dns_resolver registered
    Jan 02 23:22:36 arch_1 kernel: registered taskstats version 1
    Jan 02 23:22:36 arch_1 kernel: Magic number: 14:436:362
    Jan 02 23:22:36 arch_1 kernel: rtc_cmos 00:04: setting system clock to 2014-01-03 04:22:34 UTC (1388722954)
    Jan 02 23:22:36 arch_1 kernel: PM: Hibernation image not present or could not be loaded.
    Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1144K (ffffffff818cb000 - ffffffff819e9000)
    Jan 02 23:22:36 arch_1 kernel: Write protecting the kernel read-only data: 8192k
    Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 1008K (ffff880001504000 - ffff880001600000)
    Jan 02 23:22:36 arch_1 kernel: Freeing unused kernel memory: 420K (ffff880001797000 - ffff880001800000)
    Jan 02 23:22:36 arch_1 systemd-udevd[50]: starting version 208
    Jan 02 23:22:36 arch_1 kernel: Floppy drive(s): fd0 is 1.44M
    Jan 02 23:22:36 arch_1 kernel: ACPI: bus type USB registered
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbfs
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver hub
    Jan 02 23:22:36 arch_1 kernel: SCSI subsystem initialized
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new device driver usb
    Jan 02 23:22:36 arch_1 kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    Jan 02 23:22:36 arch_1 kernel: ehci-pci: EHCI PCI platform driver
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: EHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: debug port 1
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd: USB Universal Host Controller Interface driver
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: irq 22, io mem 0xf7ade000
    Jan 02 23:22:36 arch_1 kernel: FDC 0 is a post-1991 82077
    Jan 02 23:22:36 arch_1 kernel: libata version 3.00 loaded.
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 1-0:1.0: 6 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 16 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :16
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
    Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 2-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
    Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 3-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: version 3.0
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x2f impl SATA mode
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio ems sxs
    Jan 02 23:22:36 arch_1 kernel: ahci 0000:00:1f.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: scsi0 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi1 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi2 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi3 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi4 : ahci
    Jan 02 23:22:36 arch_1 kernel: scsi5 : ahci
    Jan 02 23:22:36 arch_1 kernel: ata1: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970100 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata2: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970180 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata3: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970200 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata4: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970280 irq 58
    Jan 02 23:22:36 arch_1 kernel: ata5: DUMMY
    Jan 02 23:22:36 arch_1 kernel: ata6: SATA max UDMA/133 abar m2048@0xff970000 port 0xff970380 irq 58
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: pata_acpi 0000:00:03.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 22 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :22
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 4
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1a.2: irq 22, io base 0x0000fc00
    Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 4-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 17 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :17
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: UHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    Jan 02 23:22:36 arch_1 kernel: uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 23 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :23
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: EHCI Host Controller
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: debug port 1
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: irq 23, io mem 0xff980000
    Jan 02 23:22:36 arch_1 kernel: ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 8-0:1.0: 6 ports detected
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 5-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 6-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 7-0:1.0: 2 ports detected
    Jan 02 23:22:36 arch_1 kernel: xen: registering gsi 18 triggering 0 polarity 1
    Jan 02 23:22:36 arch_1 kernel: Already setup the GSI :18
    Jan 02 23:22:36 arch_1 kernel: ata_generic 0000:00:03.2: setting latency timer to 64
    Jan 02 23:22:36 arch_1 kernel: scsi6 : ata_generic
    Jan 02 23:22:36 arch_1 kernel: scsi7 : ata_generic
    Jan 02 23:22:36 arch_1 kernel: ata7: PATA max UDMA/100 cmd 0xfe80 ctl 0xfe90 bmdma 0xfef0 irq 18
    Jan 02 23:22:36 arch_1 kernel: ata8: PATA max UDMA/100 cmd 0xfea0 ctl 0xfeb0 bmdma 0xfef8 irq 18
    Jan 02 23:22:36 arch_1 kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata4: SATA link down (SStatus 0 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata6: SATA link down (SStatus 0 SControl 300)
    Jan 02 23:22:36 arch_1 kernel: ata2.00: ATAPI: PIONEER DVD-RW DVR-217D, 1.07, max UDMA/66
    Jan 02 23:22:36 arch_1 kernel: ata3.00: ATA-8: WDC WD15EARX-00ZUDB0, 80.00A80, max UDMA/133
    Jan 02 23:22:36 arch_1 kernel: ata3.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    Jan 02 23:22:36 arch_1 kernel: ata1.00: ATA-6: WDC WD360GD-00FNA0, 34.06J34, max UDMA/133
    Jan 02 23:22:36 arch_1 kernel: ata1.00: 72303840 sectors, multi 0: LBA48
    Jan 02 23:22:36 arch_1 kernel: ata1.00: applying bridge limits
    Jan 02 23:22:36 arch_1 kernel: ata2.00: configured for UDMA/66
    Jan 02 23:22:36 arch_1 kernel: ata3.00: configured for UDMA/133
    Jan 02 23:22:36 arch_1 kernel: ata1.00: configured for UDMA/100
    Jan 02 23:22:36 arch_1 kernel: scsi 0:0:0:0: Direct-Access ATA WDC WD360GD-00FN 34.0 PQ: 0 ANSI: 5
    Jan 02 23:22:36 arch_1 kernel: scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-217D 1.07 PQ: 0 ANSI: 5
    Jan 02 23:22:36 arch_1 kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD15EARX-00Z 80.0 PQ: 0 ANSI: 5
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] 72303840 512-byte logical blocks: (37.0 GB/34.4 GiB)
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 2930277168 512-byte logical blocks: (1.50 TB/1.36 TiB)
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] 4096-byte physical blocks
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write Protect is off
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write Protect is off
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DP
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DP
    Jan 02 23:22:36 arch_1 kernel: sda: sda1 sda2
    Jan 02 23:22:36 arch_1 kernel: sdb: sdb1
    Jan 02 23:22:36 arch_1 kernel: sd 0:0:0:0: [sda] Attached SCSI disk
    Jan 02 23:22:36 arch_1 kernel: sd 2:0:0:0: [sdb] Attached SCSI disk
    Jan 02 23:22:36 arch_1 kernel: sr0: scsi3-mmc drive: 16x/16x writer cd/rw xa/form2 cdda tray
    Jan 02 23:22:36 arch_1 kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
    Jan 02 23:22:36 arch_1 kernel: sr 1:0:0:0: Attached scsi CD-ROM sr0
    Jan 02 23:22:36 arch_1 kernel: usb 3-2: new full-speed USB device number 2 using uhci_hcd
    Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
    Jan 02 23:22:36 arch_1 kernel: end_request: I/O error, dev fd0, sector 0
    Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: USB hub found
    Jan 02 23:22:36 arch_1 kernel: hub 3-2:1.0: 3 ports detected
    Jan 02 23:22:36 arch_1 kernel: device-mapper: uevent: version 1.0.3
    Jan 02 23:22:36 arch_1 kernel: device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: [email protected]
    Jan 02 23:22:36 arch_1 kernel: bio: create slab <bio-1> at 1
    Jan 02 23:22:36 arch_1 kernel: usb 3-2.2: new full-speed USB device number 3 using uhci_hcd
    Jan 02 23:22:36 arch_1 kernel: hidraw: raw HID events driver (C) Jiri Kosina
    Jan 02 23:22:36 arch_1 kernel: usbcore: registered new interface driver usbhid
    Jan 02 23:22:36 arch_1 kernel: usbhid: USB HID core driver
    Jan 02 23:22:36 arch_1 kernel: input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:1a.1/u
    Jan 02 23:22:36 arch_1 kernel: hid-generic 0003:046D:C713.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitec
    Jan 02 23:22:36 arch_1 kernel: EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
    Jan 02 23:22:36 arch_1 kernel: usb 3-2.3: new full-speed USB device number 4 using uhci_hcd
    Jan 02 23:22:36 arch_1 systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SY
    Jan 02 23:22:36 arch_1 systemd[1]: Detected virtualization 'xen'.
    Jan 02 23:22:36 arch_1 systemd[1]: Set hostname to <arch_1>.
    Jan 02 23:22:36 arch_1 systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit
    Jan 02 23:22:36 arch_1 systemd[1]: Expecting device dev-hvc0.device...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Remote File Systems.
    Jan 02 23:22:36 arch_1 systemd[1]: Reached target Remote File Systems.
    Jan 02 23:22:36 arch_1 systemd[1]: Expecting device sys-subsystem-net-devices-enp0s25.device...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting LVM2 metadata daemon socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on LVM2 metadata daemon socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Delayed Shutdown Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on Delayed Shutdown Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Device-mapper event daemon FIFOs.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on Device-mapper event daemon FIFOs.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Paths.
    Jan 02 23:22:36 arch_1 systemd[1]: Reached target Paths.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on Journal Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Setup Virtual Console...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Load Kernel Modules...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Journal Service...
    Jan 02 23:22:36 arch_1 systemd[1]: Started Journal Service.
    Jan 02 23:22:36 arch_1 systemd-journal[129]: Journal started
    Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Kernel Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Kernel Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Control Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Listening on udev Control Socket.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting udev Coldplug all Devices...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    Jan 02 23:22:36 arch_1 systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Po
    Jan 02 23:22:36 arch_1 systemd[1]: Started Set Up Additional Binary Formats.
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Create list of required static device nodes for the current kernel
    Jan 02 23:22:36 arch_1 systemd[1]: Mounting Huge Pages File System...
    Jan 02 23:22:36 arch_1 systemd[1]: Starting Encrypted Volumes.
    Jan 02 23:22:36 arch_1 systemd[1]: Reached target Encrypted Volumes.
    Jan 02 23:22:36 arch_1 systemd[1]: Mounting Debug File System...
    Jan 02 23:22:36 arch_1 systemd[1]: Mounting POSIX Message Queue File System...
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Apply Kernel Variables...
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Swap.
    Jan 02 23:22:37 arch_1 systemd[1]: Reached target Swap.
    Jan 02 23:22:37 arch_1 systemd[1]: Started File System Check on Root Device.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Remount Root and Kernel File Systems...
    Jan 02 23:22:37 arch_1 systemd[1]: Expecting device dev-disk-by\x2duuid-1f355bf1\x2d1469\x2d4722\x2d8f65\x2d01
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Root Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice Root Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting User and Session Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice User and Session Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting System Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice System Slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting system-netctl.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-netctl.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting system-getty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-getty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting system-serial\x2dgetty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Created slice system-serial\x2dgetty.slice.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Slices.
    Jan 02 23:22:37 arch_1 systemd[1]: Reached target Slices.
    Jan 02 23:22:37 arch_1 systemd[1]: Started udev Coldplug all Devices.
    Jan 02 23:22:37 arch_1 kernel: FS-Cache: Loaded
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered named UNIX socket transport module.
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered udp transport module.
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp transport module.
    Jan 02 23:22:37 arch_1 kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'nfs'
    Jan 02 23:22:37 arch_1 kernel: FS-Cache: Netfs 'nfs' registered for caching
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_evtchn'
    Jan 02 23:22:37 arch_1 kernel: xen:xen_evtchn: Event-channel device installed
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntdev'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_gntalloc'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_blkback'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_netback'
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_pciback'
    Jan 02 23:22:37 arch_1 kernel: xen_pciback: backend is vpci
    Jan 02 23:22:37 arch_1 kernel: ACPI: Requesting acpi_cpufreq
    Jan 02 23:22:37 arch_1 kernel: Monitor-Mwait will be used to enter C-1 state
    Jan 02 23:22:37 arch_1 kernel: Warning: Processor Platform Limit not supported.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Apply Kernel Variables.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Setup Virtual Console.
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted Huge Pages File System.
    Jan 02 23:22:37 arch_1 kernel: xen_acpi_processor: Uploading Xen processor PM info
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted Debug File System.
    Jan 02 23:22:37 arch_1 systemd-modules-load[128]: Inserted module 'xen_acpi_processor'
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted POSIX Message Queue File System.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Load Kernel Modules.
    Jan 02 23:22:37 arch_1 systemd[1]: Mounting Configuration File System...
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted FUSE Control File System.
    Jan 02 23:22:37 arch_1 systemd[1]: Mounted Configuration File System.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Create list of required static device nodes for the current kernel.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Create static device nodes in /dev...
    Jan 02 23:22:37 arch_1 systemd[1]: Started Remount Root and Kernel File Systems.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Load/Save Random Seed...
    Jan 02 23:22:37 arch_1 kernel: EXT4-fs (dm-0): re-mounted. Opts: data=ordered
    Jan 02 23:22:37 arch_1 systemd[1]: Started Load/Save Random Seed.
    Jan 02 23:22:37 arch_1 systemd[1]: Started Create static device nodes in /dev.
    Jan 02 23:22:37 arch_1 systemd[1]: Starting udev Kernel Device Manager...
    Jan 02 23:22:37 arch_1 systemd[1]: Starting Local File Systems (Pre).
    Jan 02 23:22:37 arch_1 systemd[1]: Reached target Local File Systems (Pre).
    Jan 02 23:22:37 arch_1 systemd[1]: Mounting /tmp...
    Jan 02 23:22:37 arch_1 systemd[1]: Mountin

    I have the same problem on Fedora Core 20 with xen 4.3.1 32bit Sempron3200+ with turned off HPET tables on South bridge and these boot options
    xen: noreboot nosmp console_to_ring console=vga vga=text-80x50
    linux: pci=noacpi pci=nommconf
    Image on Yandex disk
    When I solve it I notify you.
    Last edited by maskimko (2014-01-16 08:12:35)

  • After upgrading to 10.6.3 TV is only showing "out of range" message

    After upgrading to 10.6.3 my TV (Sharp 37XDE1) is only showing the message "out of range".
    Before upgrading I had no problems.
    Connection is via MiniDisplay Port to HDMI Adapter from iMac 24" or MacBook Pro 13".
    The "Out of range" message could be an indicator that the resolution or the signal speed is not matching properly. I tried to get the signals and resolution in line with the SwitchResX utility but without success.
    (TV monitor was recognized by the display preferences and SwitchResX)
    Any ideas whats wrong?

    HI,
    If you didn't repair disk permissions after you updaed to 10.6.3, do that now.
    Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
    Carolyn

  • Monitor out of range

    Brand new Mac Mini out of the box.   Hooking HDMI to a Westinghouse L2610NW.  Showing "out of range".  No way to hook up VGA with what is out of box because there is only a DVI-D adaptor. Tried powering on with no HDMI connected.  Tried connecting another computer to the monitor and that works. No DVI connection on the monitor.  No other monitor available to connect to.  Can you set to 1024x768 out of the box just to get through the set up?

    The native resolution for your L2610NW is 1920 x 1200 and the Mac Mini supports that using the HDMI port.
    With the monitor connected, reset the PRAM as per > About NVRAM and PRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.

  • Out of Range problem

    I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the refresh rate is out of range for it. This same problem occurs with any VGA monitor I use. Is there any way around this? I just bought the Cars game for my kids, for example, and I can't use it (Cars does not have a windowed mode).
    Thanks

    As it turns out, I tried switchresX and I can force the game not to change the settings. It works, but it seems silly for me to spend an extra 17.00 to play a $29 game. Anyone know of a free utility that does the same thing?

  • Mac mini 2014 mDP out of range

    Hi,
    I have a strange issue with Mac mini late 2014 and NEC PA272W monitor. Mac mini and the monitor are connected by high quality mini display port cable.
    Sometimes on boot the display is reporting: Out of range message H 14,6KHz. Its a sync problem?
    Then I have to turn off and on the monitor to restore image.
    Any advice to this?

    Sadly, this "out of range" problem has re-appeared today :-/
    This is log from the console:
    08.02.2015 13:36:44,486 WindowServer[121] Received display connect changed for display 0x28da5200
    08.02.2015 13:36:44,486 WindowServer[121] Found 1 modes for display 0x28da5200 [1, 0]
    08.02.2015 13:36:44,486 WindowServer[121] Display 0x28da5200 changed state to offline
    08.02.2015 13:36:44,490 WindowServer[121] No display devices are on-line. Switching to virtual display mode
    08.02.2015 13:36:44,493 WindowServer[121] Received display connect changed for display 0x3f003d
    08.02.2015 13:36:44,493 WindowServer[121] Found 1 modes for display 0x003f003d [1, 0]
    08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[2560 x 1440], 35 modes available
    Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
    UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
    08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d02: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:44,503 WindowServer[121] Display 0x41dc9d01: GL mask 0x2; bounds (3585, 0)[1 x 1], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:44,506 WindowServer[121] CGXDisplaysDidReconfigure: Display added
    08.02.2015 13:36:44,506 WindowServer[121] CGXDisplaysDidReconfigure: Display removed
    08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d00: GL mask 0x1; bounds (0, 0)[2560 x 1440], 35 modes available
    Main, Active, on-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 0, Rotation 0
    UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
    08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d02: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:44,507 WindowServer[121] Display 0x41dc9d01: GL mask 0x2; bounds (3585, 0)[1 x 1], 2 modes available
    off-line, enabled, built-in, Vendor 756e6b6e, Model 76697274, S/N 0, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:44,521 com.apple.AmbientDisplayAgent[169] AMBD: copyVCGTtoLUTtable() synth'ing linear LUT
    08.02.2015 13:36:46,507 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
    08.02.2015 13:36:46,518 DMProxy[373] CGSCopyDisplayInfoDictionary: error requesting display info dictionary (0x3e8)
    08.02.2015 13:36:46,523 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x41dc9d00: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 3)
    08.02.2015 13:36:46,526 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
    08.02.2015 13:36:46,539 DMProxy[373] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
    08.02.2015 13:36:46,543 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x41dc9d00: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 3)
    08.02.2015 13:36:46,547 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
    08.02.2015 13:36:46,550 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
    08.02.2015 13:36:46,554 com.apple.AmbientDisplayAgent[169] AMBD: copyVCGTtoLUTtable() synth'ing linear LUT
    08.02.2015 13:36:46,555 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
    08.02.2015 13:36:47,000 kernel[0] EDID CEA Extensions not valid for audio [Revision ID]: 1 (minimum value: 3)
    08.02.2015 13:36:48,212 WindowServer[121] Received display connect changed for display 0x3f003c
    08.02.2015 13:36:48,213 WindowServer[121] Found 43 modes for display 0x003f003c [43, 0]
    08.02.2015 13:36:48,213 WindowServer[121] Display 0x003f003c changed state to online
    08.02.2015 13:36:48,239 WindowServer[121] New display device coming on-line. Switching from virtual display mode
    08.02.2015 13:36:48,240 WindowServer[121] Received display connect changed for display 0x3f003d
    08.02.2015 13:36:48,240 WindowServer[121] Found 1 modes for display 0x003f003d [1, 0]
    08.02.2015 13:36:48,252 WindowServer[121] Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
    off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:48,252 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
    texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
    08.02.2015 13:36:48,252 WindowServer[121] Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:48,252 WindowServer[121] Display 0x28da5200: GL mask 0x1; bounds (0, 0)[2560 x 1440], 43 modes available
    Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 38a3, Model 6948, S/N 0, Unit 0, Rotation 0
    UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
    08.02.2015 13:36:48,252 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
    texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
    08.02.2015 13:36:48,262 WindowServer[121] Display 0x28da5200: Unit 0: Startup Mode 2560 x 1440, CGSThirtytwoBitColor, Resolution 1, ioModeID 0x80001000, ioModeDepth 0x0, IOReturn 0x0
    08.02.2015 13:36:48,262 WindowServer[121] CGXDisplaysDidReconfigure: Display added
    08.02.2015 13:36:48,262 WindowServer[121] CGXDisplaysDidReconfigure: Display removed
    08.02.2015 13:36:48,263 WindowServer[121] Display 0x28da5200: GL mask 0x1; bounds (0, 0)[2560 x 1440], 43 modes available
    Main, Active, on-line, enabled, boot, OpenGL-accel, Vendor 38a3, Model 6948, S/N 0, Unit 0, Rotation 0
    UUID 0x3cd5b411aa96bcb56a310d5b3ba2be96, ColorSpace { 847203028 }
    08.02.2015 13:36:48,263 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
    texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
    08.02.2015 13:36:48,263 WindowServer[121] Display 0x003f003e: GL mask 0x4; bounds (3584, 0)[1 x 1], 2 modes available
    off-line, enabled, OpenGL-accel, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:48,264 WindowServer[121] GLCompositor: GL renderer id 0x01024501, GL mask 0x00000007, accelerator 0x00002447, unit 0, caps QEX|MIPMAP, vram 1536 MB
    texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
    08.02.2015 13:36:48,264 WindowServer[121] Display 0x003f003d: GL mask 0x2; bounds (3585, 0)[1 x 1], 1 modes available
    off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
    UUID 0xffffffffffffffffffffffffffffffff
    08.02.2015 13:36:48,273 WindowServer[121] MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x28da5200 device: 0x7fa849516e60  isBackBuffered: 1 numComp: 3 numDisp: 3
    08.02.2015 13:36:50,241 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
    08.02.2015 13:36:50,263 WindowServer[121] **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
    08.02.2015 13:36:50,267 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
    08.02.2015 13:36:50,270 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
    08.02.2015 13:36:50,301 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
    08.02.2015 13:36:50,304 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
    08.02.2015 13:36:50,312 DMProxy[374] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
    08.02.2015 13:36:50,319 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
    08.02.2015 13:36:50,334 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
    08.02.2015 13:36:50,334 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
    08.02.2015 13:36:50,340 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
    08.02.2015 13:36:50,346 DMProxy[375] AMBD Services: connection interrupted: com.apple.AmbientDisplayAgent (Connection interrupted)
    08.02.2015 13:36:50,350 WindowServer[121] CGXSetDisplayColorProfileAndTransfer: Display 0x28da5200: Unit 0; ColorProfile { 847203028 }; TransferTable (256, 12)
    08.02.2015 13:36:50,355 com.apple.AmbientDisplayAgent[169] AmbientDisplayAgent started
    08.02.2015 13:36:50,359 com.apple.AmbientDisplayAgent[169] AMBD initializing devices
    08.02.2015 13:36:50,365 com.apple.AmbientDisplayAgent[169] AMBD Agent: xpc connection became invalid during event handler
    08.02.2015 13:36:51,808 Console[376] Failed to connect (_consoleX) outlet from (NSApplication) to (ConsoleX): missing setter or instance variable

  • Monitor out of range problem

    I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the refresh rate is out of range for it. This same problem occurs with any VGA monitor I use. Is there any way around this? I just bought the Cars game for my kids, for example, and I can't use it (Cars does not have a windowed mode).

    as a wild guess, some monitors come with software drivers that allow to get more options for setting parameters.
    you can check Sony site for any drivers for your monitor model, and also check what video card you have in G5 and check on card manufacturer site for driver updates for Mac OS.

  • Input signal out of range with HDMI to VGA adapter LE1901w

    Hi!
    Recently I acquired an LE1901w monitor to use as second screen. I'm trying to connect it to my Toshiba u925 using an HDMI to VGA adapter (because neither the monitor has a HDMI port nor the notebook has a VGA output).
    I'm getting the message "input signal out of range" asking to change to 1440x920 @ 60Hz and it keeps showing until the monitor goes to sleep even when I change the settings as per requested.
    I have an integrated Intel HD Graphics 4000 and i'm using the default Windows monitor drivers for Windows 8.1
    Any comment will be helpful
    Thanks
    This question was solved.
    View Solution.

    Hello @fbinim,
    I understand that you are getting the message "Input Signal Out Of Range" and it is asking you to change to 1440x920 @ 60 Hz. I suspect this is a driver issue and you will need to ensure that your drivers are up to date on your computer. Just to be sure I would recommend if you could to move the HP LE1901W monitor to another computer and ensure that you do not have the problem there. If you do have it on another computer The issue you are experiencing appears to be a physical issue. Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Getting error: RC-50004 String index out of range when running adclonectx.pl

    Hi,
    I'm trying to clone a RAC database on the same host. I'm using the MOS note:
    Cloning Oracle E-Business Suite Release 12 RAC-Enabled Systems with Rapid Clone ( Doc ID 559518.1  )
    I run the command from Step 5.1.3:
    perl adclonectx.pl ......
    But getting error:
    "RC-50004: Error occurred in CloneContext:
    String index out of range: 38
    ERROR: context creation not completed successfully."
    From the Clone Context logfile:
    PROMPT :
    Number of DATA_TOP's on the Target System [3]
    ANSWER :
    1
    PROMPT :
    Target System DATA_TOP Directory 1
    ANSWER :
    +DATA/prod/datafile
    ASM Path, not Validating: +DATA/prod/datafile
    Creating ../data/stage/addbhomtgt.xml which will contain Target system database mount points.
    StackTrace:
    java.lang.StringIndexOutOfBoundsException: String index out of range: 38
             at java.lang.String.substring(String.java:1765)
             at oracle.apps.ad.context.CloneContext.gen_iFile(CloneContext.java:6681)
             at oracle.apps.ad.context.CloneContext.getInputFromUsers(CloneContext.java:1114)
             at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:601)
             at oracle.apps.ad.context.CloneContext.main(CloneContext.java:5260)
    RC-50004: Error occurred in CloneContext:
    String index out of range: 38
    Context file creation not succesful
    And workaround/solution will be much appreciated. Thanks very much.

    FYI, I'm cloning on the same host as target. This is 2 node EBS RAC setup.
    PATH is OLD source for contextfile.xml
    Latest clone patches applied.
    Here is the complete output from the log file...
    [oracle@PPDBS11 bin]$ cat /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/bin/CloneContext_0908210110.log  
    Using admin directory: /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/bin
    #------Log File time stamp: 0908210110------------
    # $Header: CloneContext.java 120.92.12010000.26 2013/05/06 12:02:01 mmanku ship $
    # Running on          - ppdbs11
    # Source Host         - null
    # Domain Name         - <xxxx.yyyy.zz>
    # Context Location    - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/PREPROD1_ppdbs11.xml
    # Context Type        - null
    # Context Template    - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/template/adxdbctx.tmp
    # Clone Stage Area    - null
    # Pairs File          - /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/pairsfile.txt
    # Destination Context - null
    # Validation          - false
    # Platform Migration  - false
    # no prompt           - false
    Variables extracted from pairsfile: /u01/app/oracle/product/11.2.0/dbhome_1/appsutil/clone/pairsfile.txt
    ****************************************************/n
       s_undo_tablespace  =  APPS_UNDOTS1
       s_dbClusterInst  =  2
       s_db_oh  =  /u01/app/oracle/product/11.2.0/dbhome_1
    ****************************************************   PROMPT :
    Target System Hostname (virtual or normal) [ppdbs11]
    ANSWER :
    ppdbs11   PROMPT :
    It is recommended that your inputs are validated by the program.
    However you might choose not to validate them under following circumstances:           -If cloning a context on source system for a remote system.
             -If cloning a context on a machine where the ports are taken and
              you do not want to shutdown the services at this point.
             -If cloning a context but the database it needs to connect is not available.   Do you want the inputs to be validated (y/n) [n] ?
    ANSWER :
    n   PROMPT :
    Target Instance is RAC (y/n) [y]
    ANSWER :
    y   PROMPT :
    Target System Database Name
    ANSWER :
    PROD   PROMPT :
         Host name [ppdbs11]
    ANSWER :
    ppdbfmisscan   PROMPT :
         Virtual Host name [null]
    ANSWER :
    ppdbs11-vip   PROMPT :
         Instance number [1]
    ANSWER :
    1   PROMPT :
         Private interconnect name [ppdbs11]
    ANSWER :
    ppdbs11-priv   PROMPT :
    Target System Base Directory
    ANSWER :
    /u01/app/oracle   PROMPT :
    Oracle OS User [oracle]
    ANSWER :
    oracle   PROMPT :
    Oracle OS Group [oinstall]
    ANSWER :
    oinstall   PROMPT :
    Target System utl_file_dir Directory List
    ANSWER :
    /usr/tmp/PROD   PROMPT :
    Number of DATA_TOP's on the Target System [3]
    ANSWER :
    1   PROMPT :
    Target System DATA_TOP Directory 1
    ANSWER :
    +DATA/prod/datafile
    ASM Path, not Validating: +DATA/prod/datafile
    Creating ../data/stage/addbhomtgt.xml which will contain Target system database mount points.  
    StackTrace:
    java.lang.StringIndexOutOfBoundsException: String index out of range: 38
             at java.lang.String.substring(String.java:1765)
             at oracle.apps.ad.context.CloneContext.gen_iFile(CloneContext.java:6687)
             at oracle.apps.ad.context.CloneContext.getInputFromUsers(CloneContext.java:1120)
             at oracle.apps.ad.context.CloneContext.doClone(CloneContext.java:601)
             at oracle.apps.ad.context.CloneContext.main(CloneContext.java:5266)   RC-50004: Error occurred in CloneContext:
    String index out of range: 38
    Context file creation not succesful

  • Airport Out of Range WinXP

    Hello everybody, my problem is the next: I have a Airport Extreme Base Station (AEBS) linked to a netgear DM111 by ethernet cable, so the whole ISP is configured on the netgear and that info passes through the cable to the AEBS making it just a wireless access point, on my 15" and 17" MacBook Pros there is no problem i got internet, printing and disk sharing (all crystal clear) but with my Windows XP machine there's a whole, when i search on the wifi signals i can see my AEBS but when i try to connect to it there is a message that says "the internet base station you want to join is out of range" so i cannot connect to it, please someone could tell me what the cause of the problem could be? should be the channel where my airport is transmitting?
    Thanks
    imacpanther
    Message was edited by: imacnet

    HI
    I don't know if your are using your Air Port Extreme as your main router or not, but in my case I had the same issue and I had to set my Airport Extreme Base Station as a bridge just to use it for wireless since I have 3 win xp laptops since I have a FIOS router
    You might want to check the xp pc to see where it’s getting it’s IP address since it might be on the netgear ip address if that is not your main router.
    I also had to get the Air Port Express since my laptops could not connect to the Air Port Extreme, just like your issue it could see it but not connect to it
    in my case, the problem was that my Airport Extreme, after being fully reset, was on a different subnet than the PC I was attempting to admin from. In my case, all my home computers are in 192.168.0.*, and the Airport's factory default is 169.254.22.something.
    My solution is as follows:
    First hook up a cable(Network Cable) from the laptop/PC to the express
    1) Open Network Connections->Local Area Connection->Properties->Internet Protocol (TCP/IP) Properties
    2) Write down the current settings from the Express card
    3) Change the IP Address to 169.254.22.5 (doesnt matter as long as the first 3 numbers match the Airport, and the fourth is different). I left my subnet mask at 255.255.255.0 and the gateway at 192.168.0.1.
    4) Hit "OK" on two windows, the internet connection should be temporarily down but the Airport Admin should now be able to connect.
    5) While changing your settings, make sure the Airport will have an accessible IP address, either through DHCP or manually setting it to be on your subnet.
    6) make the changes and update the Express changes, it should connect at which time remove the cable
    7) Return to the TCP/IP Properties on the PC and restore the original settings
    Hope this helps

  • Index: The argument is out of range: 8 0 or 8 =8. (Error: RWI 00012)

    Hi Friends,
    One of my user is receiving the below error, pls help me is resolving this.
    index: The argument is out of range: 8<0 or 8>=8. (Error: RWI 00012)
    Thanks in Advance
    MMVIHAR

    Hi,
    No, you defiitely should not/cannot apply FP4.2 ontop of SP05
    This fix is going to be ported to FP5.1  which is planned for CW25 (end of June)  according to here:
    https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000092015&_SCENARIO=01100035870000000202&
    Regards,
    H

  • Macbook Pro Out of Range Refresh Rate

    I have a Macbook pro with a Rocketfish MiniDisplay Port to HDMI adaptor connected to an HP2311X monitor which is recognized but the Macbook states that the input signal is out of range wanting 1920x1080 at 60 Hz. The Macbook is clearly the source of the problem. I have reset both the PRAM and SMC.
    The values the monitor states it is receiving is this:
    H:68.2kHz V:61Hz"
    What can I do to resolve this issue? Could the Rocketgfish adaptor be a source of the problem as well, or even the cable?
    Thank you all in advance
    Spockthrow

    Fixed my own problem
    Reset display plist files and it worked
    reviews.cnet.com/8301-13727_7-20025336-263.html

Maybe you are looking for

  • Create new portal-user with webservice

    Hi, I'm trying to develop a ejb-webservice which is creating a new Portal-User. The webservice is working so far, I made methods like getDisplayName() which is returning the display name to a logonId and so on. All this is working. I'm using the comp

  • Getting lines between colors in Illustrator

    Hi, I have a problem and I'm looking for some advice. I dropped a raster image into Illustrator (AI) and with Live Trace, turned it into a vector image that looks excellent on my monitor. However, when I load the vector file into a PDF and then open

  • Spatial index creation error -ORA-13011: value is out of range

    I am trying to create a spatial index and this is what I get. ERROR at line 1: ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine ORA-13200: internal error [ROWID:AAAFXYAADAAABxyAAD] in spatial indexing. ORA-13206: internal error [

  • When watching Youtube, there is no picture, but on Internet Explorer there is. How come?

    When opening YouTube in Firefox there is sound, but the picture immediately disappears. On Internet Explorer there are no problems. It might have to do with updating of Firefox some week ago.

  • N79- can't see my installed applications

    I tried installing applications in the cellphone or using PC suite, but no matter what, I can't see the apps that I installed in the Applications Folder. When I  was installing the apps, there wereno error messages and ends with a flash, so I assume