Port replicator 2504 and w530

Hi all,
would like to check if the 2504 is compatible with the W530?
I do realize it will miss the USB3.0 functionality, but that is not an issue.
Solved!
Go to Solution.

Welcome to the Forum!
Advanced Mini-dock 2504 is not compatible with W530. You will need a Mini Dock Series 3 with USB 3.0, or Mini Dock Plus Series 3 with USB 3.0. Check here for the exact model numbers which you can use with your system: http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD024298
Have a great day. (I do not work for Lenovo)

Similar Messages

Enhanced USB port replicator 43R8811 and dual monitor

I have problem with USB port replicator. I cannot put a right resolution to monitor (wide screen monitor). Replicator's settings say that I can use up to 1280x1024 resolution but monitor support i.e. 1400x1050 resolution which port replicator should support by user manual.
If I put monitor direct to my X300 laptop I can use monitor's right resolution (1680x1050).
Is it drivers problem or what that I cannot put a right settings?
-Paul-

I'm having trouble understanding your phrasing.
The Enhanced USB Port Replicator I recently purchased supports 1440x900 and can be configured to do so. I did have to install the drivers by downloading from the web (they were provided on a CD -- convenient since my laptop came with no CD/DVD drive :-). Once the drivers were installed, it happily suports 1440x900. Did you already install the software? Older versions of the port replicator don't support above 1280x1024, but that should not be the case with the Enhanced one.
So you should be able to set any resolution up to 1440x900.
Of course "1400x1050" would be a higher resolution than 1440x900, and thus not supported right?

Lenovo USB 3.0 Dock / Port Replicator (0A33970) and ThinkPad T430

Purchased a 0A33970 port replicator and having issues getting it working. Cannot display to an external monitor. Trouble shooting suggests bringing up the GUI but I don't see options for managing or troubleshooting. The CD would not autostart, mouse does not seem to work, really not impressed so far and had to disconnect everything to get some work done today. Who has gone through the process of standing up an A33970 and getting it to work right? My T430 was just built in September of 2013 so it is fresh and should be compatible with the A33970.

Hi,
Please run through this guide for general troubleshooting tips:
http://www.displaylink.org/forum/showthread.php?t=896
If you are using Windows 8.1 please see this guide:
http://www.displaylink.com/support/ticket.php?id=346
To help us investigate the issue, please download this tool:
http://www.displaylink.com/support/ticket.php?id=269
Please run it and select "Gather Support Information"
It's also worth trying the "System Compatibility Check" to see if anything is flagged up.
Please send all results to technical_enquiries @ displaylink.com with a mention of this thread.
Thanks,
James

USB Port Replicator II and IEEE1284 - Windows XP

I have a port replicador (Px1098e-1prp) and it is impossible to make work LPT (IEEE1284) nevertheless in Windows 98 works perfectly. I have a M30-801 and I have also proven in several computers and it wont works with Windows XP. How can I make it works?
Thanks!

Drives is correct for Windows XP. (V1.10) 02/08/04 To the second question: IF I can use the 4 ports without problems, everything works except the LPT. Since I have said I have proven in two PC's and in both it happens the same. In Windows 98 IF it works perfect! but in Windows XP no!

Help - T42p and Lenovo Enhanced Port Replicator does not external monitor

T42p Win Xp SP2 2GB Memory ATI Mobility Fire GL T2
I had an old style port replicator that supported my ThinkVision 17" flat panel monitor. The port replicator died and I got a replacement - Lenovo Enhanced port replicator. If I go to the Control panel/Display it now shows 3 monitors and when I try to enable #2 or #3 it takes the extend my desktop setting but when you press the identify button it only recognizes #1 (my T42). My external monitor is blank..............any ideas where to start?

No, I could not get help from any place. I did some research on my own and realized that the Lenovo port replicator (with Lenovo name on it) is actually theTargus ACP50 which is sold as a universal port replicator. The difference is that the Lenovo unit has a driver specific to Lenovo. I even went to Targus website and download their latest “generic” driver. The driver worked with the Lenovo computer fine, but still does not resolve the issues that you and I see. So I concluded that it is the port replicator crappy design.

Port Replicator III+ very high cpu when moving usb mouse only in W2k

Tecra M2 with a port replicator III+
It's set to dual boot into XP and Win2000 (yes I know it's getting on a bit, but I've got a lot of stuff installed in win2k that is difficult to get hold of these days).
XP is 100% fine, but with win 2000 if I use my *USB mouse* on the *port replicator* ports and waggle the mouse around - the *CPU* jumps from 0 to *70+%* usage (the system process which I think indicatates as IRQ problem). If I plug the mouse into the laptop ports (when the laptop is docked) - it's fine, at most 5% cpu usage. It's a basic microsoft mouse. I definately think it's a usb problem of some kind, because the cpu even jumps a bit if I type quickly on my usb keyboard (only a couple of %). It happens with all the replicator's usb ports.
Any ideas? I don't really want to plug in my mouse in the morning because it kinda defeats the point of having a docking station in the first place! I've got the mobile extensions installed. All the other aspects of the replicator are fine
Martin

Huh it will not be easy to find good explanation for this.
At this time when Tecra M2 was offered on the market as compatible port replicator Toshiba has offered Toshiba Advanced Port Replicator III (not +) and at this time both supported operating system was tested with it.
Later Toshiba has designed Toshiba Advanced Port Replicator III+ and confirmed compatibility with Tecra M2 but obviously with newer (at this time) WXP.
So now you have follow situation: you use newer port replicator but with much older operating system so I presume there is maybe some compatibility problem with W2K.
I cannot imagine you use it so often with W2K and if yes it cannot be so problematic to connect mouse directly on notebooks USB port.
Sorry but I dont think there is anything you can do about it.

Port replicator on T43

Hello,
I received today the Port replicator but could not get the PC to recognize this and create a "docked" hardware profile.
Going trough diferent searches I could not find if the port replicator should allow "docking" or not
The use of the port replicator is mainly to be able to disconnect the second monitor, external keyboard, mouse and LAN when I have to move into an other room and being able to link up to projectors trough the VGA port

Huh it will not be easy to find good explanation for this.
At this time when Tecra M2 was offered on the market as compatible port replicator Toshiba has offered Toshiba Advanced Port Replicator III (not +) and at this time both supported operating system was tested with it.
Later Toshiba has designed Toshiba Advanced Port Replicator III+ and confirmed compatibility with Tecra M2 but obviously with newer (at this time) WXP.
So now you have follow situation: you use newer port replicator but with much older operating system so I presume there is maybe some compatibility problem with W2K.
I cannot imagine you use it so often with W2K and if yes it cannot be so problematic to connect mouse directly on notebooks USB port.
Sorry but I dont think there is anything you can do about it.

Portege R500 - Slim port Replicator II: Dual Monitor DVI & RGB together

Is it possible to use a dual monitor setup on a slim port replicator II if I connect one monitor to the DVI-port and the other to the RGB-port?
I have a Toshiba Portege R500 notebook.
TIA

Hi
I didnt find any information regarding the Advanced Port Replicator II but I found some info about Advanced Port Replicator III and the simultaneous usage of RGB & DVI ports
So the point is that this is possible *BUT ONLY* if notebook system unit _itself also support_ RGB & DVI simultaneous usage.
regards

Connection of two screens on PA3508E-1PRP port replicator

Hello,
Does somebody know if we can connect two screens on this port replicator ? and use with the "extend my desktop" option in Windows ?
Thanks you
Regards

It seems you speak about the Toshiba Express Port-Replikator for Portg M400.
In my opinion the Express Port-Replikator supports RGB & DVI simultaneous usage only if notebook system unit itself also supports RGB & DVI simultaneous usage.

Port replicator, docking station 2504

I need to ask dumb and dumber questions.
First the dumb question. I have a T61 that I upgraded to Windows 7. I used the automatic driver utility and everything works fine, both docked in a 2504 or undocked. I would like a more detailed user manual than the one you can get in support. That one says to go to the Lenovo help in ThinkAdvantage to "port replicators" for detailed instructions, however that is replaced with the Toolbox for Windows 7 which does not have any info for port replicators. Is there any way to get a detailed user manual or the detailed help for the 2504 port replicator?
If I had that I may not have to ask the second dumber question. The key, which I have, can not be removed unless it is in the locked position requiring the key to unlock and use the dock. Is there any way to remove the key in the unlocked position so the key is not needed? I really don't need that type of security and worry I may someday lose the key, even if I leave it in the lock.
Thanks for any help

thanks for reeply.
I can only take out the key when it is in the unlocked position, when I move it to the locked it is held by something in the lock, I have pushed buttons, unplugged the power but it still only can be removed with the key "vertical" or unlocked, with the key horizontal or locked it is stuck in.
because I do not have the detailed help for this mini dock, they were lost in the Windows 7 upgrade, according to the very basic mini dock user guide it says to go to the Lenovo help in ThinkAdvantage under port replicator for detailed help, but that was only available with the original OS, Vista, Windows 7 Lenovo upgrade has a ThinkAdvantage Toolbox which does not have that help available, I believe there must be a certain button or a release slot I can't see to release the key

X1 and USB Port Replicator with digital video - hangs system

Hi
with the X1 to help with docking it everyday at the office I have a USB Port replicator with digital video. I am not using the digital video but the USB ports, head phone and mics plus ethernet.
When I plug it in it detects it OK, I then installed the software. But after reboot it looks to stall when logging into windows, screen flickers back and forth and locks up the operating system. I unlplug it and reboot and window is working fine.
Note as I mentioned I am not using the digital output but instead using an external monitor via the display port on the back of the laptop.
Also its is very slow to boot (Lenovo bios splash screen is there for about a minute)
I have gone into the bios and turned off all other bootable devices just leaving the laptops hard drive.
As a work around I have removed the software and I am getting the basic functionality of the port replicator, but not the ethernet.
I have run the update manager but does not appear to show a need to update the drivers.
Model X1 (1293-CTO)
Windows 7

Hi, I have this same exact problem.
Video (anything from youtube to downloaded shows, movies) will freeze for 5-7 seconds at a time. The sound continues to play while the video is 'frozen', and the video resumes after that.
It will happen on its own, with no bumping, but it is more prone to happen if I do something like increase the volume within the media player.
Any suggestions are much appreciated!

Lenovo USB 2.0 Port Replicator Freezes Issues and Problems

Okay, I have THREE of these port replicators in my office, and ALL THREE have the exact same problem on various laptops(X1, T420, Edge 13) with various kayboard/mice. I've been through all stages of the port replicator drivers on the various systems, and the issue is always there. All laptop drivers are updated.
Here is the issue: working away, and then bam, mouse and keyboard don't work. I'm working in a external monitor only display setup. I go to the keyboard/touchpad on the laptop and they don't work...however ctrl+alt+delete works on the laptop keyboard(not the regular one). Then the touchpad works...but I can't click on any of the settings EXCEPT sleep. When I press a button to wake it up, everything works fine. Basic external keyboards/mice, no need for different drivers.
The other thing that fixes everything is unplugging the USB connection from the port replicator and plugging it back in to the laptop(or unplugging the power to the port replicator).
The weird thing is that I took the keyboard and mouse and they are plugged into the laptop itself, NOT the dock, and I still get the same issue with responsiveness. This happens on ALL the docks, so it's not a keyboard/mouse driver thing.
The one thing that's occuring to me is that maybe it's a weird display issue? I haven't tried actually using the external or laptop keyboard to run commands while it's frozen...and I also haven't tried unplugging things from the port replicator one by one (such as unplugging the display cable from the port replicator, then the printer, then the ethernet). I'll keep you updated if I get any further. It's been like this for months, and my users are just doing the workarounds. one thing is for sure...
I'M NEVER GOING TO SUBSTITUE THIS PORT REPLICATOR FOR A NORMAL DOCK AGAIN! (although i have no choice with the X1).

Hi skrasher, welcome to the forum,
could you please try the following to see if it changes the behaviour of the USB ports. In Device Manager, with the port rep attached, disable the ability on each of the USB Root Hubs for Windows to disable the device in order to save power, restart the system and see if the problem still occurs.
Let us know how you get on.
edit; for clarity
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Port Replicator loses connection to 2 external monitors and moves all the windows to the main screen

I recently purchased a Lenovo USB 2.0 Port Replicator with Digital Video (0A33942) to use with my Lenovo ThinkPad E530 laptop and two external monitors. One of the monitors is plugged into the port replicator with a VGA cord and the other one is plugged in directly into the laptop also with VGA.
The issue I'm having is randomly during the day, both screens will go blank, when they come back up everything that was open on the second screen gets moved to the main one. This happens about 15 times a day and although not a life threatening issue, it's still more of an annoyance moving everything back to the second screen as it was originally set up.
I have gone to Power Options and I have switched the sleep mode to 'Never'. Anyone have any suggestions? This is really driving me nuts. I tried calling Lenovo support and they told me this wasn't in "their scope" of support issues.
Thanks

this is a driver incompatibility issue, it happens with some displaylink devices. I had this problem with the Lenobo USB 2.0 port replicator before.
Since the E530 has USB 3.0, i suggest you get a Lenovo's USB 3.0 dock, which will support 2 external LCD (but only one of the dvi on the dock can be converted to vga).
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

X300: External Monitors and port replicator

The X300 looks really good, but when not traveling I'd be using it with a 24" 1920x1200 monitor.
A couple questions I can't see to find answers for:
1) Is the X300 capable of driving that resolution for an external monitor?
2) Assuming a good answer to #1, it seems like the new USB-based docking station has an resolution of 1440x or 1400x. Can the replicator be used, but skip using the video out and, instead, just use the video out from the X300?
Using the port replicator may not make sense that way since I might as well just plug everything in manually, but wanted to ask.
Thanks in advance for any help/clarity around this.

ed, it's an obvious question with a not-so-obvious answer. the specs actually come from intel's published info on the X3100 integrated graphics. for whatever reason lenovo doesn't list their systems' output capabilities in easily-accessible documentation. not even the X300 topseller announcement letter mentions display output. i've never understood this as it would clear up many customers' questions and uncertainties.
this makes a thinkpad's ability to output high resolution is a perpetually-confusing topic. to help put things in perspective, it takes only 12MB of video memory to drive 2048x1536 @ 32-bit and only 9MB to drive 1920x1200 @ 32-bit. the X300 with its ability to use up to 384MB of shared system memory can easily drive two displays simultaneously within the VGA limitations on each port; 2048x1536 on-board and 1400x1050 via the port replicator.
update: fixed typo.
Message Edited by erik on 05-05-2008 02:19 AM
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Port Replicator (45K1610), x301, and resolution help

I have a x301, a port replicator with model number 45K1610, and a Dell 22" wide screen monitor. When I connect the monitor directly to the laptop I can get the max resolution of 1680x1050 out of the monitor but when I plug the monitor through the port replicator I can only get a max resolution of 1440x900. We have some customers here that what to run the monitor through the port replicator and have it mirror the laptop with the resolution of 1680x1050. I have not been able to find a way to do this and according to the specs of the port replicator it is capable of pushing a resolution greater than the 1680x1050. Anyone have any idea on how to get this to work? Thanks.

I am having the same issue. For some reason, mirroring will only match the max laptop resolution on the external display. I have a 24" monitor that can display 1080p. I need to get the external display to AT LEAST 1600x1200.
I understand the you can extend to the external display, but I am unable to set the external display as the primary monitor (move the start button, taskbar, etc) to the external.

Port replicator 2504 and w530

Similar Messages

Maybe you are looking for