Port used for Linksys Smart Wifi

Good day,
Please i would like to find out the port used for Linksys Smart Wifi Login via the Internet. I have blocked alot of ports on my router and i am not able to login via the Internet again.

Blocking unknown isn't normally required because the router firewall does that normally. Blocking specific port is good but you need to know what they are used for. UPnP devices will open ports as needed if you have UPnP enabled on the router.
Sorry I don't know the specific ports or process remote access uses. I sure it's a dial out feature and not a dial in.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

Linksys smart Wifi error while deleting offline device from device list

i have Cisco Ea4500 with linksys smart wifi, each time i try delete offline device i get error message.
anyone can help?

What browser did you use in deleting offline devices? Are you doing it under the Device list? If yes, normally it should be deleted because those are widgets only. Can you try your other browsers? And do it on the main computer.

Linksys Smart WiFi doesn't support IE11

Has anyone had trouble accessing Linksys Smart WiFi with IE11. I keep getting browser not supported and it won't let me in. I can't even get in using the routers IP settings.

This was my fix! I downloaded Mozilla FireFox, installed and it worked great with Smart WiFi. I then tried IE11 again and guess what? It worked like a charm and is still working. Go Figure!

In time capsule, can ethernet ports used for windows pc as a LAN?

in time capsule, can ethernet ports used for windows pc as a LAN?

i am connecting my windows pc to the time capsule ethernet prots but those pcs are not shown in my macbook or those windows pc also can not see my macbook pro. i am facing the problem...

How can i get the port used for https

Hi All,
does aynbody knows how can i get in the portal the port used for https connection, cause the link send by e-mail notification, when user has been invited in a room doesnt work...
i tried to use the command netstat -ao and i tried use the port that i get there.. but then i get message, when click on the link: "The page cannot be displayed"
we have following settings:
server port: ??
Web Protocol: https://
Thanks for suggestions!
Karol

Hi Karol,
by navigating to:
Content Administration -> Collaboration Content -> (Room Administration -> Related Topics) -> Configure Backend Properties for Rooms
you can change the Webprotocol to http:// and set server port to 50000 (default port).
To see the SSL Port you can go in the Visual Administrator to Services -> "HTTP Provider Services".
http://help.sap.com/saphelp_nw04/helpdata/en/a2/f9d7fed2adc340ab462ae159d19509/frameset.htm
Hope this helps,
Robert

HT201250 I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to ba

I am having trouble setting up my time capsule. the amber light is flashing. i have a Verizon FIOS network that i use for the internet (WiFi) and do not want to configure the Time Capsule to do that function. I just want the Time Capsule to back up.

Simple.. bridge the TC.. in the apple utility in the NAT and DHCP area.
Plug it into the FIOS router.. you can turn off wireless in the TC if you want.. or use it.. it can work faster if you are nearby and can select 5ghz.. but up to you.

ACE 4710 what are these ports used for?

Hello, what are these ports used for please? What can I do with them?
Thank you
Sent from Cisco Technical Support iPhone App

Hi Bilal,
They are reserved for future use. Please have a look at the link below:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/ace_appliances/4710/hardware/installation/guide/Overview.html#wp1043136
Regards,
Kanwal

Ea3500 linksys smart wifi reboots every 5 secs

can not connect my ea3500 (v1.1.39....) with linksys smart wifi from iphone 5s iOS 7.1.2 it reboots every 2-5 secs endlessly
also can not connect it from the web via latest firefox and IE after input in my login and password the circle spins endlessly
reboot doesnt help, only restore
tired of restoring it
does anyone have this problem? maybe new sw is needed?

Ok so the router is ok but the app on your iphone reboots? Have you done a full power off on your phone lately? If that doesnt work try a reboot on your iphone.
Begin by holding the sleep/wake button at the top right of the device and the Home button at the bottom center of the face at the same time.
Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power-off slider appears. If it appears, just keep holding it
Wait until the silver Apple logo appears.
When this happens, you can let go - the iPhone is rebooting

Not enough port fields in port forwarding for Linksys E4200

I have always used netgear routers in the past. After a series of issues regarding configurations not working correctly I invested in what appeared to be a semi pro router, the cisco linksys e4200.
I have a centralized server which I use to access a mass of different services such as mail, dns, VPN, FTP, Kerberos, http and many more. While I am not a massive networking nerd, this server setup is like my garage project. To access these services externally to my LAN as far as I understand I would need to configure port forwarding for each service to my server. Unfortunately the control panel for the linksys E4200 only offers about 15 custom port fields for forwarding, and some documentation I have read shows that with it's basic install my server could be using up to 60 ports at once.
Is this router just not suitable for this sort of network. If so I will be very disappointed because I have spent a quarter of the price on netgear routers with more control than this.
If anybody could assist with details and options I would greatly appreciate it

Wrong forum, use "small business routers".

Unable to get Linksys smart wifi to work...I NEED HELP!

I am unable to benefit from the additional tools from Smart Wifi for EA3500. I have the the account, the password, but when I login it says you need to associate your router with your system...I've tried myrouter.local, linksyssmartwifi, enter the password and still i get your need to associate your router with your account. NOT sure what I am doing but all I know is after 8+months of trying various things to get this to work I about to remove it and go back to just a standard router without wireless account garbage that everyone seems to have trouble connecting. My system is fairly new Lenovo only had it maybe 5 months using windows 8.1. Any help will be most appreciated! Please give step by step instructions, please don't assume I know computers/routers/networking because if i did i wouldn't have these problems... :-) Pretend I am 10yrs and you have to be specific and detailed about what,where,how,etc., regarding getting smart wifi tools to work.... No offense to 10 year olds...

Homegrown619 wrote:
I am unable to benefit from the additional tools from Smart Wifi for EA3500. I have the the account, the password, but when I login it says you need to associate your router with your system...I've tried myrouter.local, linksyssmartwifi, enter the password and still i get your need to associate your router with your account. NOT sure what I am doing but all I know is after 8+months of trying various things to get this to work I about to remove it and go back to just a standard router without wireless account garbage that everyone seems to have trouble connecting. My system is fairly new Lenovo only had it maybe 5 months using windows 8.1. Any help will be most appreciated! Please give step by step instructions, please don't assume I know computers/routers/networking because if i did i wouldn't have these problems... :-) Pretend I am 10yrs and you have to be specific and detailed about what,where,how,etc., regarding getting smart wifi tools to work.... No offense to 10 year olds...
Any progress on this?

Port fowarding for linksys WVC54GC Wireless G internet video camera

Hi
I have recentlty installed a linksys WVC54GC Wireless G internet video camera. My plan to is to view the video from the internet. As part of the setup, I am using SOLOLINK DDNS service. The set up requires me to do port forwarding for the camera which is part my home network ..
I do not know the values to input for
public port
private port
with in the port mapping environment in the Air port express base stations.
Linksys suggests I open port 1024.. Can any one help me in the setup ..

Thanks,
I have done the changes, It does answer the specific issues i had asked. However I am still unable to view my camera from the the internet.. I did some reading up and I think the problem is due to the IP address..
My AEBS assigns IP which looks like 10.0.1.1 .... In order avoid changing IP, i had assigned the camera with the static IP 10.0.1.252. This is outside the AEBS dynamic range. Hence when i access from internet, i get a message that server is not responding. it looks like this is not a valid IP from an external internet world... I have looked at the AEBS settings and found the actual IP in ther internet tab.. Should I assign the camera with the actual IP ??.. However that is DHCP, so I am a little lost ....

EA6900 Can't connect to Router error message from Linksys Smart Wifi

Hello Everyone, I am having an issue where I cannot remotely access my router. I currently have Charter as my ISP and have internet connectivity when at home. I can also access my router through Smart Wifi when on my local connection. When I try to access remotely I get the "Can't connect to the router" error message. I believe that I have enable the correct settings on my router to provide this service. Any thoughts would be greatly appreciated! Thanks in advance. Mike Carlin

Thanks for the reply. ISP: Charter CableModem: Wish I could tell you at this point, but not at home and can't remember specifics. I thought that I did the association. Is this what you are talking about?http://www.linksys.com/us/support-article?articleNum=140177

Special QoS config on the witch port used for unity ?

Hi, I'm actually tunning my qos config and I want to know if you apply a special Qos Config on the sowth port used by unity.
Thanks

The following document talks about QoS config for Unity Express. You can use the same appropriately for Unity too.
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_installation_guide_chapter09186a0080527151.html

Port used for task display form in Oracle BPM Worklist from SOA human task

My problem is that when I click on my task in worklist it is trying to show the task flow UI in a frame using port 7101 which is my admin server instead of port 7102 which is my SOA server where the task display form is actually deployed.
I have an admin server running on port 7101 and a managed server with SOA configured running on port 7102. My application contains a soa composite project and a task flow project that was auto-generated from the human task in my composite. The applications deploys successfully to the soa server and I can run my BPEL process successfully and see the task show up in worklist.
I have modified hwtaskflow.xml with this:
<TaskFlowServer>
<hostName>localhost</hostName>
<httpPort>7102</httpPort>
<httpsPort>8002</httpsPort>
</TaskFlowServer>
I access worklist at: http://localhost:7102/integration/worklistapp/
But when I click on my task in worklist, the task display form is being referenced at
http://<ip address>:7101/workflow/VacationRequestTaskFlow/faces......
instead of
http://localhost:7102/workflow/VacationRequestTaskFlow/faces......
Any ideas? After changing hwtaskflow.xml I redeployed and restarted everything and it still doesn't work.
Edited by: Billy Turchin on Oct 1, 2009 12:43 PM

Actually my config.xml does not have have two soa_server1 entries ... it has only two <server> entries but each one also has an SSL entry; see below. (This was not done by me BTW, but rather when I ran the domain configuration wizard)
I don't think the problem has to do with the SSL entries, because those ports are not getting used. The default port for my human task is 7101 (DefaultServer) instead of 7102 (soa_server1). Once I changed the port using the EM it seems to remember it when I deploy new revistions of that composite but anytime I deploy a new composite for the first time, the port for the task display form is incorrectly set to 7101.
How exactly does worklist determine which port and URI to use for a human task's display form? Does it iterate through all the registered task display forms to find one that is registered for the given human task? (ie its not a property of the human task itself, but rather a property of the registered ADF display forms).
<server>
--<name>DefaultServer</name>
--<ssl>
----<name>soa_server1</name>
----<listen-port>8001</listen-port>
--</ssl>
--<machine>LocalMachine</machine>
--<listen-port>7101</listen-port>
--<listen-address></listen-address>
--<tunneling-enabled>true</tunneling-enabled>
</server>
<server>
--<name>soa_server1</name>
--<ssl>
----<name>soa_server1</name>
----<listen-port>8002</listen-port>
--</ssl>
--<machine>LocalMachine</machine>
--<listen-port>7102</listen-port>
--<listen-address></listen-address>
</server>
Thanks for the replies thus far...
Edited by: Billy Turchin on Oct 5, 2009 5:21 AM

Ports used for Intelligent agent and snmp master agent

I could not find any documentation regarding which ports are used for communication between master and intelligent
agent. Moreover which port has to be mentioned if I use snmpget for the master agent. Please let me also know if I use a
management platform like CA-Unicenter with which port I have to send the traps and where to configure.
Thanks
Pragati Awasty

John Ross Hunt (guest) wrote:
: Once libtcl7.5.a is built and copied to the
: $ORACLE_HOME/network/lib directory, can the rest of the
: installation in /usr/local be deleted?
Yes, all that Oracle needs is the library to link in.
- Phil
null

Port used for Linksys Smart Wifi

Similar Messages

Maybe you are looking for