Port X reset error -110 at Boot

Could someone please take a look at the errors I'm getting at boot and let me know suggestions to troubleshoot? Or are they okay to ignore?
The lines causing concern are:
Jan 29 22:45:22 archdesktop kernel: hub 3-0:1.0: USB hub found
Jan 29 22:45:22 archdesktop kernel: hub 3-0:1.0: 4 ports detected
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: firewire_core 0000:02:04.0: created device fw0: GUID 0010dc000095324e, S400
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 5 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 5. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: unable to enumerate USB device on port 5
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: over-current condition on port 6
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 6 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 6. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: unable to enumerate USB device on port 6
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: over-current condition on port 7
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 7 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 7. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: unable to enumerate USB device on port 7
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: over-current condition on port 8
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2:ll port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: hub 1-0:1.0: Cannot enable port 8. Maybe the USB cable is bad?
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Jan 29 22:45:22 archdesktop kernel: ehci_hcd 0000:00:13.2: port 8 reset error -110
Full journalctl -b at https://gist.github.com/4670776
I also captured lsusb -v in case it is needed.
I found https://bbs.archlinux.org/viewtopic.php?id=135932 which seems to indicate that I may, or may not, have a serious issue that could damage components.
Also, any help with interpreting the log files, especially lsusb, is appreciated.

Run lsusb -v with things plugged into the ports and compare the output to the previous lsusb -v (and journalctl as well). I'll check something else when I get home in a couple of hours on my machine as well.
I think your machine might be misreading the proper current for your ports based on this:
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Do you know if these ports are powered, i.e., can you plug a phone in and it charges? If so, then this report of "Self Powered" and "MaxPower 0mA" is wrong (or indicative of some sort of sleep mode?). If it is because they are being powered down, this should change when you plug something into it and it wakes up.

Similar Messages

IPod shuffle Reset Utility Reset Error

My ipod shuffle (1st gen) is not shown in itunes or finder.
I have tried all the following already:
1) Switching usb ports
2) Turning on/off ipod
3) restarting computer
4) reinstalling itunes
I followed the directions for Reset Utility. My ipod was found by the utility, but results in a "reset error" everytime (multiple restarts already tried).
Worked fine until I used the ipod to transfer data to a pc. I've done this multiple times w/o a problem. This time, the ipod was incompatible with windows (itunes updated on that computer, too). Don't know if this matters.
None of the lights come on. Does not appear to be charging. The ipod shows no life.
It is no longer under warranty.
Please help or I'll have to listen to the radio in my car.
ibook g4 Mac OS X (10.4.8)

I did not touch my shuffle for 3 days, tried it in my computer again, and it still failed. All the same problems. No lights and none of the programs acknowledged it, except the reset utility, which gave me the same error message.
So, I returned here, praying for answers. Nothing. For some reason, I tried turning the ipod on, and BOOM, I got a green light and it seemed okay. Tried it in my computer again, and now it works! I've reset it anyway (through itunes), and all seems well.
I guess time does heal all wounds. Thanks to everyone who tried to help. Assume all worked out unless you hear from me again.
No more radio for me! (again)... yeah.

Partition Magic Error 110 on new Thinkpad W500

I have a new W500 that (automatically) configured to WinXP right out of the box (which is the OS I want).
After getting the OS in order (updates, customizations, firewall, anti-virus, firmware updates, etc.) I installed my PowerQuest Partition Magic v8 (and applied the patch v8.01).
The HD was configured as almost entirely used by C:, with some 5g allocated to the 'hidden' partition.
I'm trying to resize C: down to about 25g, in order to be able to created new partitions, and I am unable to do so.
I'm first receiving Error 110 "Partition table number of sectors is inconsistent" and PM is asking me if I want to "fix" this situation. I have NOT YET allowed PM to proceed. After that, it attempts to still "run", but then I get some other errors and the program closes.
I ran the reporting/inquiry program and it gave me a few other errors on the partitions (i.e. Errors 105, 106 108, and 109).
From what I've seen on the internet, there seems to be some problem(s) with PMv8 and Vista, but I am running XP.
Has anyone seen this before?
Thank you in advance.

Hello,
our mods here do favour it, too.
And member TomTom in my sugested thread has done it simply and fast.
There is NO problem partitioning the drive, though you have to be careful not to modify/ erase the last special partition.
R&R files are kept on the C: drive so there is a special partition at the end of the drive,
that is used for booting before the OS.
If you damagethis one, theres is no more Blue Button functionality.
Please, first burn your recovery DVD´s and safe your C:/SWTool folder, if something goes
wrong you can easily restore your system with your software.
Regards
Andreas
Message Edited by Agotthelf on 10-01-2008 08:12 PM
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

SMTP port number resets to 25 after every reboot

Because of our ISP, we have to use a non-standard SMTP port number to send via our mail server. This works just fine when I change the SMTP port in the Mail program. However, every time I reboot my MacBook, the port is reset back to 25, and I have to manually go in and change the port number again. This is of course really annoying. Does anyone have a fix for this problem, and has anyone else experienced it? Thanks for any help!

No, you wouldn't see any error messages, because as far as the system knows, it is saving those changes. But if the file is corrupt, those changes don't stick when you quit Mail, so it reverts to the default.
Since you have a POP account, quit Mail, remove the com.apple.mail.plist file from Home/Library/Preferences, then restart Mail and setup the account(s) again and Mail will find and "import" the existing email folders. Then setup your SMTP port preferences again, quit Mail and restart to see if they stick. If they do, you can delete the old com.apple.mail.plist file.

Performance loading websites is terrible & occasional "connection reset" errors after upgrade

Firefox is very slow (minutes, really) to load web pages to the point where I have time to go open another browser (generally chrome) and cut/paste the url to see whether it is a network problem or not. So far Chrome has been able to load the pages very quickly while Firefox takes several minutes. Additionally I will get occasional "Connection Reset" errors. I was suspicious of browser add-ons, anti-malware software etc on my system so I've unstalled everything (except Sophos) and the bits which come with Windows7 (64bit). I uninstalled Firefox, deleting all user settings, browser history, etc and reinstalled a fresh copy. This didn't affect the problem.
I have gone through the hints in the performace faq, set the proxy setting to no proxy, turned off ipv6 dns and dns prefetching and the problems exist. I'm happy to try and help track this down but I don't really know where to start. '''bold text'''

I have the same problem, but only with firefox, because is the only program that i use (also watch videos with VLC, but this have no problem).
I think we should report, but i'm not sure where.
A screenshot: http://imgur.com/QKrisQa
$lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:01.0 PCI bridge: Intel Corporation 4 Series Chipset PCI Express Root Port (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 2 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
04:01.0 Multimedia controller: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder (rev 01)
PD: Sorry for my bad grammar.

POSIX Error / Will Not Boot

I have a Seagate Momentus XT 500GB HD in my Macbook Pro, and it will not boot. It gets to the loading screen with the apple and the spinning circle, but it just hangs there.
I tried booting from the Snow Leopard installation disk and formatting with Disk Utility, but it gives me that infamously mysterious "POSIX: Cannot allocate memory." error.
I tried taking the hard drive out and connecting it with a SATA to USB adapter, and Disk Utility could easily format and re-install OS X SL on it, and the computer would boot from it as an external hard drive. I tried installing the HD back into the laptop and it wouldn't boot again, which lead me to believe that it was an issue with my laptop, not the hard drive.
I then took it out and connected it to a Windows computer with the SATA to USB, and it worked like normal; I could browse the filesystem (I had the BootCamp HFS+ drivers installed).
I just took my old external hard drive out and took it apart. I put that hard drive into my laptop and am booting it from the SL install disk and was going to try to format that. For some reason, that hard drive just doesn't show up in Disk Utility, so I'm assuming that that hard drive is just broken by itself, although it worked with the SATA to USB adapter. But that's a completely different issue that I don't really care about anyway right now.
I just want my normal hard drive to work. The laptop is out of warranty, and I don't really want to buy a $250 or howevermuch Apple Care warranty just to get this one thing fixed, because this is obviously Apple's issue (I come to this conclusion from reading many other threads that contain less detail, but end up with the same issue as me).
I did try resetting the NVRAM and booting into single user mode and typing "fsck -fy" or something along those lines... I don't feel like looking up the place I found it. But yeah, I've tried those both.
Any suggestions? Thanks a ton; I need this computer for school...
Message was edited by: Ben Alt.

Lol yes, it is my issue in that sense. What I meant though is that it's an issue caused by a defect that Apple should solve. I say this because I've seen other people with the same problem. But yes, it is my own issue that I need to solve.
I thought of the ribbon cable, too. To be honest, I'm not really comfortable bringing it into the Apple Store. Do you think it'd be a good bet to just try the ribbon cable first, and then if that doesn't work to bring it into the store?
I found the cable on iFixit for $39.95. Do you think that's a reasonable price?
Thanks for the quick reply!

CS6 master collection (korean)trial ver. error 110 or 108

My system is windows 7 X64 ultimate, 8G ram and 500G HDD
When I tried to download CS6 master collection (korean)
trial version via adobe download asistance, everytime when the progress is about 2/3 complete, the statement "error 110....." or 108 appear and the download stopped.
I tried to restart the download, but the download didn't restart again. Even I tried another new download, but the same thing happened again.
Also I tried format my computer,but same thing happened again.
(Reformat and reinstall)
What happened to the CS6 download manager or server whenever the download is reached certain place, it stopped ?
Is there any alternative way other than adobe download assistance to download trial version of CS 6 master collection (korean) version since I need to elvauate the product before my purchase?
Please help me!

Try downloading CS6 using the direct download link.
http://prodesigntools.com/adobe-cs6-direct-download-links.html
Please read the instructions very carefully, you will be directed to another website to complete the download:

Error 110 encountered and download stopped

My system is windows 7 X64 ultimate, 8G ram and 230G HDD
When I tried to download creative suite 6 master collection (Traditional Chinese) trial version via adobe download asistance, everytime when the progress is about 2/3 complete, the statement "error 110....." appear and the download stopped.
I tried to restart the download, but the download didn't restart again. Even I tried another new download, but the same thing happened again.
I tried another machine that run windows xp, but same thing happened again. I have search the adobe web, there is direct download link, but the Traditional Chinese version is not available there.
What happened to the CS6 download manager or server whenever the download is reached certain place, it stopped ?
Is there any alternative way other than adobe download assistance to download trial version of CS 6 master collection (Traditional Chinese) version since I need to elvauate the product before my purchase?

I think, I've found the answer. The problem is at adobe's side.
Not only the traditional Chinese version of CS6 master collection, but also the Korean version are not available for download although they were appearred in ADA. Because I've tried to download these two versions, same problem happened, instead very smooth download for English or Japanese versions.
Any Adobe's official can answer my question?

Error 110 on download assistant downloading korean cs6 master collection

Error 110 on download assistant downloading korean cs6 master collection
I am using windows 8, 64bit.
I am trying to download adobe cs6 master collection in Korean.
But when I try to do it, it does well untill about 3/4, and stops. (Error communicating with Adobe.com (Error 110).)
So I downloaded on all of the computers I have, (two windows 7s) and they also stopped at about 3/4
I tried to fix this problem with this link solution 1:
http://helpx.adobe.com/creative-suite/kb/troubleshoot-download-assistant.html
But, It didn’t work.
However, when I downloaded The engligh version, It worked!
How can I download CS6 Master Collection in Korean?

Try this:
Direct Download Links for Adobe Software
Mylenium

Firefox connection was reset error for a long request

I have a web service api which takes 5 minutes to respond a JSON response message.
In firefox (version 32.0.3), I get a "The connection was reset" error after 2 to 3 minutes.
When I call my call my API in Chrome, there is no error and I get the intended response after 5 minutes.
I have tried the following without any luck:
1. tweaking timeout values in about:config
2. clearing browser caches
3. setting "No proxy" in network settings
4. disabling ad-ons and starting in safe mode.

I tried it with Firefox 29 and even 22, still after 3 minutes it just gives a connect reset.
Also, to provide more context, I am making a REST API call whih takes 5 minutes to respond. When I deploy the application on localhost, it (firefox) does not give a connect reset error and completes. But, when I deploy it on a remote server, it gives this error.

"The Connection was reset" Error while attempting to load Hotmail

I've had Hotmail for a few years now and never had a problem with it. A couple of days ago when I went to check my mail it stopped working and I got the "The Connection was reset" error (See attached picture). I've tried deleting everything (Browsing & Download History, Form & Search History, Cookies, Cache, Active Logins, Offline Website Data, Site Preferences), and it still doesn't work. I'm not running any add-ons/plugins or firewall software. I've tried running Firefox in safe mode and tried uninstalling and reinstalling and nothing is working. I've even tried on Google Chrome and Internet Explorer and I'm getting the same errors. Ideas?

For some reason the image didn't post or I'm just to dumb to find it but here's the words:
<blockquote>"The connection was reset
The connection to the server was reset while the page was loading.
The site could be temporarily unavailable or too busy. Try again in a few moments.
If you are unable to load any pages, check your computer's network connection.
If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."</blockquote>
Also I forgot to add I can access it from my phone and from my laptop it's just my desktop which doesn't load it. I can also ping www.hotmail.com and everything indicates normal. I can access all other sites from my desktop it just wont load hotmail.

Error Message at Boot-Up

WRT54GX router with Wireless-G adapter ; I get the following error message at boot - "Query My Ca Information: InfoMyCa.exe - Ordinal Not Found - The ordinal 968 could not be located in the dynamic link library LIBEAY32.dll "
Any help eliminating this message would be appreciated .

Hi Bettybee2, and a warm welcome to the forums!
As for deletion, feel free to switch iDisk Sync off and then toss the disk image. If you see a warning that the file is busy when you try to empty the Trash, log out and back in again and then empty the Trash.
http://www.macworld.com/article/134651/2008/07/massiveidiskarchive.html

WRT54G V3 Web Gui recieves "connection reset" errors on all pages

Hello,
I was recently having some connection problems with my WRT54G and decided to upgrade the firmware. The router has been stable for quite some time before the last week. The firmware was from linksys and it uploaded fine and rebooted and all was great.
When I tried to reconfigure the router settings I ran into trouble. None of the html forms will submit. All of them get "connection reset" errors when I try and update the information. Apparently there was an error in flashing or something. So I think, no prob, I'll just re-flash. Except that the firmware upgrade form also gets connection reset.
If I type in 192.168.1.1/apply.cgi it works...no connection reset (though nothing comes out). I have a hunch that if I were able to custom form the HTTP post header it might go through.
I tried TFTPing the new firmware to the router and had no success. Granted I am a mac user so I was in the terminal window instead of using the proprietary tftp util. I always get "transfer timed out" errors. I tried starting the transfer before the router responded to a ping, after, before the power light started flashing, after that, and after it went solid too.
Any help is appreciated. Thanks.

Try to update firmware using TFTP program from a windows based PC. You can get tftp from ftp://ftp.linksys.com/pub/network/

Ace - connection reset (Error 101)

Hi, I have a problem with a Cisco ACE, after approximately an hour being in production, for all new connections
it gives the message: connection reset. The message on any web browser is: connection reset (Error 101)
It blocks any backend server (Apache).I get same error also when I try to connect direcly to the backend address.
This error saturates the connections on the servers (in the log of the DB I found error connection reset)
Without ACE all work fine, it's not a load traffic issue.
It seems like once opened a connection the ace does not close it anymore!
But the graphical snmp servers do not report the increase in connections, what is mistake ?
The balancer manages two physical servers and is configured in stickyness mode
Please find attached the configuration
logging enable
logging timestamp
logging trap 4
logging buffered 3
logging host 172.16.0.2 udp/514 format emblem
access-list ANY line 8 extended permit icmp any any
access-list ANY line 16 extended permit ip any any
probe http HTTP_PROBE1
request method get url /index.php
expect status 200 206
expect status 300 307
expect status 400 417
probe tcp PROBE_TCP
interval 30
rserver host 03a.it
ip address 172.16.0.1
conn-limit max 50000 min 40000
inservice
rserver host 03b.it
ip address 172.16.0.2
conn-limit max 50000 min 40000
inservice
serverfarm host FARM_WEB
predictor leastconns
probe HTTP_PROBE1
rserver 03a.it
    inservice
rserver 03b.it
    inservice
parameter-map type http HTTP_PARAMETER_MAP
persistence-rebalance
sticky http-cookie session StickyGroup1
timeout 3600
serverfarm FARM_WEB
class-map type management match-all ICMP-ALLOW_CLASS
2 match protocol icmp source-address x.x.x.x
class-map match-all L4-WEB-IP
2 match virtual-address x.x.x.x tcp eq www
class-map type management match-all REMOTE_ACCESS
2 match protocol ssh any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
    permit
policy-map type loadbalance http first-match WEB_L7_POLICY
class class-default
    sticky-serverfarm StickyGroup1
    insert-http x-forward header-value "%is"
policy-map multi-match WEB-to-vIPs
class L4-WEB-IP
    loadbalance vip inservice
    loadbalance policy WEB_L7_POLICY
    loadbalance vip icmp-reply active
    nat dynamic 1 vlan 2541
    appl-parameter http advanced-options HTTP_PARAMETER_MAP
interface vlan 125
ip address
access-group input ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input WEB-to-vIPs
no shutdown
interface vlan 254
ip address
access-group input ANY
nat-pool
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
At the moment this happens, the simultaneous connections (command: show conn) on the server are around 350
the CPU load is 2%
sticky database has approximately 24000 records.
Log level is set to 4. But no error report.
Do you need more info to resolve the problem?
Thank you
Best Regards
N.

Hello Nicolas,
I wonder if you can include these values:
parameter-map type http HTTP_PARAMETER_MAP
case-insensitive
persistence-rebalance
set header-maxparse-length 65535
set content-maxparse-length 65535
length-exceed continue
parsing non-strict
I also noticed a lot of errors which might be caused also due to these denied under the #show resource usage all which may indicate you are reaching the license limits, but you should discuss it with your Cisco SE, please see below:
                                               Allocation
        Resource         Current       Peak        Min        Max       Denied
Context: vrack254
conc-connections              4       1267      60000      60000          0
mgmt-connections              2         28        748        748          0
proxy-connections             0       1255       7864       7864          0
xlates                        0          0       7864       7864          0
bandwidth                   572    3824781    3740624 127490624    1416859
    throughput                 96    3712886    3740624    3740624    1416859
    mgmt-traffic rate         476     111895          0 123750000          0
connection rate               1       1729       4500       4500          0
ssl-connections rate          0          0        224        224          0
mac-miss rate                 0         15         16         16          4
inspect-conn rate             0          0       1800       1800          0
http-comp rate                0          0    5898240    5898240          0
to-cp-ipcp rate               0         11         36         36          0
acl-memory                 8216      10568     744800     744800          0
sticky                    22978      22978      31456      31456          0
regexp                       19         23       7864       7864          0
syslog buffer             30720      30720      30720      30720          0
syslog rate                   0          6        750        750          0
Can you upload the specific error which you are getting also?
Jorge

[事例紹介]Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません.

このようなインストールトラブルの解決事例がありましたのでご紹介します。
【問題点】
CS5.ｘ Windows 版インストール時、「インストールに問題があります Exit Code:7」エラーが発生。
エラーサマリーには以下のエラーが含まれていました。
【エラーサマリー抜粋】
----------- Payload: {08D2E121-7F6A-43EB-97FD-629B44903403} Microsoft_VC90_CRT_x86 1.0.0.0 -----------
ERROR: 指定されたデバイスまたはファイルを開けません。
ERROR: Install MSI payload failed with error: 110 - 指定されたデバイスまたはファイルを開けません。
MSI Error message: 指定されたデバイスまたはファイルを開けません。
【解決方法】
これはMSI（Windows Installer）に関するエラーメッセージです。
Windows Installer を修復することで解決しました。
手順については以下を参照してください。
■Windows Installer の修復によるインストールトラブル対処方法（Windows）
http://kb2.adobe.com/jp/cps/890/cpsid_89088.html?sdid=JSRPP
この方法で解決しなかった、という方がいらっしゃいましたら、エラーサマリーをぜひ投稿してください。
なお、この解決方法は以下の文書にも掲載されています。
■「インストールに問題があります」エラーの対処方法（Creative Suite 5, 5.5）
http://kb2.adobe.com/jp/cps/894/cpsid_89463.html?sdid=JSRPP

The Error 1603 usually occurs due to insufficient privileges.
Try the following steps:
> Enable the hidden Admin Account on Windows 7 ( Ref : http://www.howtogeek.com/howto/windows-vista/enable-the-hidden-administrator-account-on-wi ndows-vista/ )
> Disable all Non-Microsoft Startup Services. (Ref : http://helpx.adobe.com/x-productkb/global/disable-startup-items-services-windows.html )
> Disable all the Antivirus softwares like CA, Norton,Mc Afee etc. temporarily from the computer.
Reboot and try installing in the new enabled Admin user account and check.
Regards,
Rave

Port X reset error -110 at Boot

Similar Messages

Maybe you are looking for