Portal 10g ultrasearch setup

Hello.
We are trying to configure ultrasearch for portal pages. Our server is windows 2003. Portal is 10g with patchset 1. Documentation is a little confusing and I canât find any useful documentation on metalink how to setup ultrasearch in 10g (I found it for 9.0.2). We started edited and run the setupdb.bat but no success (Access is denied. - error message). Does anybody have a list of what needs to be done in order to setup ultrasearch?
Thanks,
Gregor

We're on Linux but here's the doc we used. You might want to check it out. http://wtcis.wtamu.edu/oracle/ultra.101/b10731/install.htm

Similar Messages

Cannot Install Portal 10g on Windows Server 2003

Downloaded Portal 10G from downloads server (as_windows_x86_portal_wireless_101200) to a new Windows 2003 Server. Attempt to install, get the series of messages "checking prerequisites" ending with "All installer requirements met."
At that point the DOS window disappears, and nothing else visible happens. The "checking prerequisites" messages are also written to a log file in
c:\program files\oracle\inventory\logs
which contains no other information after the message "All installer requirements met."
However, in the server's event log I get two entries:
First...
Application Error:
Faulting application setup.exe, version 0.0.0.0,
faulting module unknown, version 0.0.0.0,
fault address 0x00000000.Followed by...
DrWatson:
The application, C:\Documents and Settings\All
Users\Documents\Downloads\
as_windows_x86_portal_wireless_101200\
Disk1\setup.exe, generated an application error
The error occurred on 03/23/2005 @ 13:09:23.531
The exception generated was c0000005 at address
0020224D (<nosymbols>)After I repeat these steps several times I still get the "Application Error" log entry, but the "DrWatson" error is replaced by a simpler message
Application Error:
Fault bucket 00134882.I noticed another recent entry in the forum that describes a similar problem -- I entered this one to insure that you had as much information as necessary to diagnose the problem. If there's any other information you would like please let me know.
Thanks in advance!

mrp wrote:
I have a machine with the following specs:
Windows Server 2003 Enterprise Edition
16GB Memory
1.2TB Storage
I heard that Oracle has a limitation of 2GB Memory Allocation for Oracle Database. Can you post steps on how to acoomplish this task?Pray tell, where did you hear that? I'd encourage you find the source and ask for your money back - they give bad advice.
More relevant info can be found at http://www.oracle.com/pls/db102/portal.portal_db?selected=3 ... scroll down to 'Platform Guide' and select the appropriate guide - Windows 32 bit, Windows Itanium, or Windows 64 bit - that is relevant to your environment. For 32 bit, look at Chapter 1 and the sections
Oracle Database Scalability on Windows
* Support for Very Large Memory (VLM) Configurations
* Windows 4 GB RAM Tuning (4GT)

ADF jdev 11g portlet in Weblogic Portal 10G R3?

Is possible to build a ADF Jdev 11g portlet and deploy it in a Weblogic Portal 10g R3?

Not with WebLogic Portal 10gR3, no, but that use case is one that will be supported in the upcoming release of WebLogic Portal, which will coincide closely with the release of WebCenter 11g.
George

Oracle WebLogic Portal 10g Certification

Hello,
Oracle provides instructor led training only for Oracle WebLogic Portal 10g. I'm wondering, where can i buy self study CD or kit for Oracle WebLogic Portal 10g Certification?
Thanks

user11928512 wrote:
Hello,
I have found certification for "Oracle Weblogic Portal 10g Developer" in the oracle university site. The latest version of BEA weblogic being 10.3 and we are currently working on the same, I would like to know whether there is certification exam for Weblogic Portal 10.3 Developer.A assume you have found:
[http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=140]
[http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=282]
[http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=41&p_exam_id=1Z0_110]
Which is the relevant exam. You can double change by going down the list of ceriifcation exams:
[http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=42]
My understanding is that for developers often releases are broadly similar and therefore the effort in updating the exam is simply unsustainable. For say Oracle DBA exams the situation may be different as their may be signifcant changes/enhancements between releases that are important to be aware of to manager the database effectively.
Please be aware I am not massively familiar with weblogic and myy anwer is not authorative.
Rgs - bigdebloy.

Import/ export of an object or item in portal 10g

Good Morning!

can anyone tell what is the format of import / export of an object or item in portal 10g?
 this is in the context of updating or rolling into production server an item whose earlier version might be sitting in the production server before. and it is based on the premise that the environment/ system is composed of more than one servers and production is only one of them.
 apologies ... if i am not even phrasing the question right. by format, what i mean to know is does it first delete the older component and then generate the new one or it renegades and keeps the older version and bring on the newer version, or what.

any hints will be appreciated.

syed

Kasia,
There are a number of guides on the documentation tab for Oracle9iAS Portal that can answer your questions. Be sure to check out the FAQ!
Rich

Document on 10g RAC setup on solaris using vmware

Hi All,
I am planning to setup "Oracle 10g RAC setup on Solaris using vmware", but I am strucked up at installation of Soaris 10 in VMWare.
Can any body please help/provide me the document on Solaris 10 installation for RAC setup .
The main problems I am having during the SOlaris 10 setup is
1) Setting up the static public and private addresses required for RAC
2) Partitioning the disk space.
Thanks in advance,
Mahipal Reddy

Refer these,
http://www.scribd.com/doc/15650880/Install-Rac-on-Solaris-Vmware
http://www.disperu.com/using-vmware-server-install-10g-rac-on-solaris/
http://nayyares.blogspot.com/2008/11/step-by-step-rac-10g-r2-solaris-10.html
Thanks
Edited by: Cj on Dec 13, 2010 2:38 AM

How to create a home page (with flash images) in Oracle Portal 10g

Hi,
I want to create a home page in Oracle Portal 10g using flash images.
How to create all those things ?
Weather it should be created in pages or pagegroups or HTML portlet / some other.
please help me.

You can find in knowledge exchange a script to create an flash file item type. With this installed you can add a flash file to an item region on a page.
Grtz,
Dirk

Registering Report Writer in Portal 10g

Portal 10g AS software is fairly new and not a lot of books are available for it.
I am looking for a guide or proper steps to registering the Oracle Report Server with Portal 10g.
I have looked at this doc: http://download-uk.oracle.com/docs/html/B14048_01/pbr_portal.htm#i1007990
and the value for "Oracle Reports Web Gateway URL for RDF reports" provided in the doc does not seem to work. Thanks for assistance.

Or the portal forum at:
Oracle Application Server Portal
Regards,
Kavitha

Does OEM Grid Control 10g support monitoring Oracle Portal 10g?

Dear expert,
It seems OEM GC 10g could monitor WebCenter, Weblogic portal and even Websphere portal, but I could not find any info for Oracle Portal. So,
1. Does OEM GC support to monitor Oracle Portal 10g? If not, does it support Oracle Portal 11g?
2. If does not support Oracle Portal, then is there any workaround for it? E.g. if it’s feasible through “web appliation”?
Any comment and docs are welcome.
Thank you in advance.

Hi Rob,
Thanks for your help.
BTW, I have another question for your reply, that what do u mean by “You can use Oracle Enterprise Manager to monitor and manage OracleAS Portal”?
Do you mean OEM AS Console or OEM GC? Boz I only find these metrics from OEM AS Console, which mentioned in this doc. http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b25987/oracle_portal.htm#CHDFJHDD
If these metrics only available in AS Console, then how to let the OEM send out email notification if critical threshold is over?
Thank you.
Tony

How to Set a page as home page in Oracle portal 10g

Hi,
I have one doubt.
How to set a page (Not Page group) as home page in Oracle portal 10g?
whether it should be a HTML Portlet or some other?
Thanks & Regards
Suthan.Sathya

Hi,
Welcome to SDN
By defining the Sort Sequence of Navigation Nodes, you can do this, check the links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3e703e632c7937e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/53/89503ede925441e10000000a114084/frameset.htm
If you need more help, just ping back.
Greetings,
Praveen Gudapati
p.s. Points are always welcome for helpful answers

Oracle Portal 10g: how to list pages controlled by goup

Hi All,
When administering our Oracle Portal 10g, we are using groups to define who has Manage access to a given page. Is there any way to list what pages a particular group has Manage access to?
Thanks for any assistance!
Rob
:)

Oportalist, thank you very much for that - it was very helpful. When our team ran that query, we got out data like:
- group name
- page name
- access role
- an LDAP identifier such as "cn=departmentname,cn=portal.080610.123111.961450000,cn=groups,dc=business,dc=com,dc=au".
Is there any way to get the actual URL to the pages being queried? The page name by itself isn't always enough context for me to work out what specific page the record is for.
Thanks again for your assistance!
Rob
:)

Recommended portel type for Java Server Faces in Portal 10G

Hi all,
What is the best [or recommended] portlet type to use to interact with Java Server Faces in Oracle Portal 10G. We a planning to use a WSRP portlet type in our current project and would like to know if this is a good/feasible approach, or whether another portlet type would be recommended.
Thanks in advance!

Entry-level stuff is linked from http://www.jsftutorials.net/
Samples with tables... eg. the MyFaces examples which show all myfaces components. http://myfaces.apache.org -> just download the binaries and sources and check out the samples
hth
Alexander

How to get 10g XE setup for windows xp?

Dear All,
Need help for opening a .dmp file.
The file is a database export of Oracle 10g so i want to installed Oracle 10g XE on my windows xp pro import .dmp file & access the data.
Please guide me for the same.
Thanks in advance.
Parag

ABKPBM wrote:
Thanks for the response.
Firstly i am a new bee in databases especially Oracle DB.
I have received the .dmp file from my boss with info that its a Oracle 10g DB and how can we access it or use it.
So i decided to use Oracle 10g XE for this purpose by using the documentation only.
I got stuck as unable to find the Oracle 10g XE setup on Oracle website.
I now have following queries:
1) Weather my thinking is in write direction .
2) How to get Oracle 10g XE setup.
3) Will Oracle 11g XE setup which is now available on oracle website will be able to import .dmp file from Oracle 10g DB.
4) How can i better myself with Oracle DB concepts to resolved the issue.
Regards
Parag
So you haven't even installed XE yet? If so, then you are nowhere near being able to use the .dmp file. First you have to have a working database, then you can use use the import utility to import the contents of the .dmp file into the working database.
The entire documentation library for all versions and products is located at tahiti.oracle.com. Drill down to your product and version and you will be looking at the entire doc library for said product/version. Including the Installation Guides.
"How can i better myself with Oracle DB concepts"
=================================================
Learning how to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com.
Locate the link for your Oracle product and version, and click on it.
You are now at the entire documentation set for your selected Oracle product and version.
BOOKMARK THAT LOCATION
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab (for 10.x) or the "Master Book List" link (for 11.x) you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- *Read a chapter a day from the Concepts Manual*.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them (listed in your alert log) in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- *When you have finished reading the Concepts Manual, do it again*.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
=================================

Good book on portal 10g v10.1.2 ??

Hi,
I'm looking for a good book that covers all aspects of Portal 10g, including the installation of app server 10g v10.1.2, configuration of portal, and portal/portlet development. I have found books on app server 10g that have sections on portal, but would really like a whole book devoted to the subject.
Any ideas?
thx
adam

I can get that example to work. The problem is with a web service omni portlet. If I take the same xml from the web service (when you click test on the screen) and do your example of an xml omni portlet it works great.
(our example is really simple)
xml:
<rowset>
<row xmlns="">
<name>
Column Name 0
</name>
<value>
Value 0
</value>
<description>
Description 0
</description>
<url>
<a href="http://www.oracle.com">URL 0</a>
</url>
</row>
<row xmlns="">
<name>
Column Name 1
</name>
<value>
Value 1
</value>
<description>
Description 1
</description>
<url>
<a href="http://www.oracle.com">URL 1</a>
</url>
</row>
<row xmlns="">
<name>
Column Name 2
</name>
<value>
Value 2
</value>
<description>
Description 2
</description>
<url>
<a href="http://www.oracle.com">URL 2</a>
</url>
</row>
<row xmlns="">
<name>
Column Name 3
</name>
<value>
Value 3
</value>
<description>
Description 3
</description>
<url>
<a href="http://www.oracle.com">URL 3</a>
</url>
</row>
<row xmlns="">
<name>
Column Name 4
</name>
<value>
Value 4
</value>
<description>
Description 4
</description>
<url>
<a href="http://www.oracle.com">URL 4</a>
</url>
</row>
<row xmlns="">
<name>
Column Name 5
</name>
<value>
Value 5
</value>
<description>
Description 5
</description>
<url>
<a href="http://www.oracle.com">URL 5</a>
</url>
</row>
<row xmlns="">
<name>
Column Name 6
</name>
<value>
Value 6
</value>
<description>
Description 6
</description>
<url>
<a href="http://www.oracle.com">URL 6</a>
</url>
</row>
<row xmlns="">
<name>
Column Name 7
</name>
<value>
Value 7
</value>
<description>
Description 7
</description>
<url>
<a href="http://www.oracle.com">URL 7</a>
</url>
</row>
</rowset>

RSS Feed on Oracle AS Portal 10g

Hi All,
I have Oracle AS Portal 10g. I want RSS Feed feature on it. Can anybody suggest me how I can achieve this?
Please share any tutorial link if any of you have.
Thanks.
Smith

Hey I am getting the below error ...
Any idea why this is occurring?
Error: Internal error (WWC-00006)
An unexpected error has occurred in pages: ORA-06502: PL/SQL: numeric or value error: character to number conversion error (WWC-44847)
An unexpected error has occurred in portlet instances: wwpob_api_portlet_inst.create_inst (WWC-44846)
I am getting this error while trying to add the omniportlet.

Portal 10g ultrasearch setup

Similar Messages

Maybe you are looking for