Portal 7.0 Installation Problem-MS SQL 2005 Collation Problem

Hi,
We are installing Portal 7.0 on MSSQL 2005.while installing ,we are facing the MSSQL collation problem.The error is
"Required MSSQL Collation for the SAP System Installation is:
SQL_Latin1_General_CP850_BIN2.
Your Server uses collation:SQL_Latin1_General_CP1_CI_AS."
Regards,
Bala.

Hi,
When installing SQL Server 2005, u need to select "Binary order based on code point comparison (use with 850 multilingual character set).
As pointed above, re-install ur SQL server and EP7.0
Regards,
Fahad

Similar Messages

HA Installation of ERP 6 With SQL 2005 Server Problem.

hi ,
i have two blade server with windows 2003 Enterprise and cluster configure on them as prescribe by the note of Microsoft.
now i have installed MS Sql 2005 Server as said by the SAP Documentation on first node and it was sucessfull . after that i installed ABAP (ASCS) SCS on first node and it was installed too . now i am stuck at the process of FIRST MSCS NODE step
the installation note says :-
7.4.5Configuring the First MSCS Node
To configure the first MSCS node so that it functions properly in MSCS, you have to run the cluster configuration option offered by the SAPinst tool. When you run this option it:
Creates the SAP cluster group
Copies tools to the SAPCluster directory
Sets the SAPService to manual
Makes sure that the SAPOsCol service starts from the SAPCluster directory
this says cluster configuration option but i can't find it any where and i don't know how the %windows%/sapcluster dir creates do i have to create it manually if so then how, the sap document says as follows :-
SapCluster Directory
In an SAP cluster installation, an additional directory u2013 %WINDIR%\SapCluster u2013 is created under the system directory.
This contains all the SAP files required by all MSCS cluster nodes, independently of the MSCS node the SAP instance is running on. The files are database tools and program files (executables) used by the operating system monitor (SAPOsCol).
The directory is added to the path variable of the user <sapsid>adm.
can any one help me in this .
thanks in advanced

thanks for response , at the phase FIRST MSCS NODE it stuck
the R3CLUS.LOG file is as follows :-
24.8.2010, 13:14:26, ntclsapclus.cpp, 213, Entry: InstallSAPResourceType
24.8.2010, 13:14:26, ntclsclinst.cpp, 58, Entry: Sclinstsrct::Create
24.8.2010, 13:14:26, ntclsclinst.cpp, 79, CreateClusterResourceType RC= 183
 Cannot create a file when that file already exists.
24.8.2010, 13:14:26, ntclsclinst.cpp, 91, DllRegisterCluAdminExtension RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 102, DllRegisterServer RC= 0
24.8.2010, 13:14:26, ntclsclinst.cpp, 116, Exit: Sclinstsrct::Create RC= 0
24.8.2010, 13:14:26, ntclsapclus.cpp, 215, Exit: InstallSAPResourceType RC= 0
and SAPINST.LOG file say's in last lines:-
INFO 2010-08-24 13:15:26.655
Execute step dGetSAPClusterParameters of component |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0
WARNING[E] 2010-08-24 13:15:26.670
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
ERROR 2010-08-24 13:15:26.824
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
and SAPINST_DEV.LOG say's in last lines :-
WARNING[E] 2010-08-24 13:15:26.670
 CJSlibModule::writeError_impl()
MUT-03028 Number value 0x-3f580000 is bigger than 0xFFFFFFFF.
TRACE 2010-08-24 13:15:26.793 [iaxxejsbas.hpp:483]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2010-08-24 13:15:26.824 [sixxcstepexecute.cpp:950]
FCO-00011 The step dGetSAPClusterParameters with step key |MSCS_A|windows|ind|ind|ind|0|0|CollectClusterParameters|windows|ind|ind|ind|3|0|dGetSAPClusterParameters was executed with status ERROR .
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:752]
 CGuiEngineImp::showMessageBox
<html> <head> </head> <body> An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > SAP Application Server ABAP > MS SQL Server > High-Availability System > First MSCS Node. You can now: <ul> <li> Choose Retry to repeat the current step. </li> <li> Choose View Log to get more information about the error. </li> <li> Stop the option and continue with it later. </li> </ul> Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/AS-ABAP/MSS/HA/MSCS-A.
TRACE 2010-08-24 13:15:26.840 [iaxxgenimp.cpp:1255]
 CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
help needed........
Edited by: Eric Brunelle to fix HTML tags on Aug 24, 2010 9:15 AM

XL Reporter problem with SQL 2005

Hi,
We just migrated our SQL Server from 2000 to 2005. Everything seemed OK, until we tried to run XL Reporter addon. Our SQL 2005 is 64bit edition, and I heard the 64bit version has some problem with transferring data to Excel, for example.
has anybody had the some problem? How can we solve this?
Thanks.
Andre

Hi Andre,
Check this thread: Re: XLR - Terminal Server
It should be a problem if your PL is upgrade to new.
Thanks,
Gordon

Microsoft SQL 2005 preload problem

Hi Guys,
First post! I took receipt of my W520 a few weeks ago. It is great, very pleased with it on the whole.
There is one problem, however. I play a fair amount of recreational card games over the internet. This requires a program which converts the text file “hand histories” into postgreSQL server data to make it quickly readable and provide tracking for win/loss among a whole host of other statistical things.
Unfortunately after going through their troubleshooting numerous times, going through factory restore and repeating the process, I still cannot get my SQL server to automatically start. Believe me, I have tried everything. Running them all as admin, editing the startup in the windows “services” dialog etc etc. The server does start manually and the program works fine, but every time I start it I have to do it manually and it is irritating. It should just start up in the background but it doesn’t.
I believe it is the Microsoft SQL 2005 express that is somehow blocking the auto start. Basically, I want my Lenovo as it is, just without the preloaded SQL server. Using the factory restore just reloads it back on and when I manually uninstall the SQL server I still have the same problem. I believe it leaves a lot of little nuggets behind when you uninstall it through the standard W7 “uninstall a program” and the full uninstall looks a long and difficult process, with no guarantee of really removing everything.
So, the plan is to install a bare copy of W7 using a borrowed disk, install my own personal SQL program and test to see if that works. I am almost certain it will. From there, I plan to build back my programs on top so I essentially have my PC now, bar the bundled SQL 2005 express or whatever it is. Following this I will make a system image and store it away safely to avoid all this mess and only reinstall using the factory disks if absolutely necessary.
I have my W7 OEM serial, found using a serial grabber. Obviously I didn’t pay all this money to scrap all the useful thinkvantage tools like “airbag” and basic fingerprint/camera drivers etc. I also like the realtime warranty countdown timer. How should I go about this task? Is all I need is the PC serial underneath to reload thinkvantage at a later date with full functionality? Is there anything I should consider before starting?
If there is a better subforum to post this question in, please let me know.
Many thanks,
Nick

What is service dependency?
Yes I tried to make a batch file. Not in startup folder, but one on the desktop that had the right path. This returned an error from the statistical program and not the SQL server. It initially looked hopeful as I had it start up the "start server" option for the right SQL server. This opened up the dos window and said it had correctly started. However, when the stats program launched it hung up on loadscreen and returned an error message. Not sure why this was, but it didn't seem to like being loaded through a .bat.
This seems like a work around more than a solution anyway. I just want to get it to work properly.
Here is the thread in the database analaysis program forum for your reference.
http://forums.holdemmanager.com/general-support/197501-hem-crashing.html
Thanks,
Nick

BW SQL 2005 import problem

Hi,
I'm trying to import one view from SQL 2005 DB. I took into consideration all rules like upper case view name, I gave the required permissions to the user BW and also created the view by the same user. There's no problem with reading data source through BW. I created info objects, defined transfer rules as well. But unfortunatelly when I try to take data to the packages it waits in not completed status wiht yellow sign. I have 10 transactions in the View.
I gave db owner, ddladmin and public permission to BW user from SQL side. ANy idea?

Hi ilker,
Below link will helps you to solve the issue and will have some sort of information.....
http://technet.microsoft.com/en-us/library/dd299430.aspx
Regards
Sudheer

Change SQL 2005 collation after installation

We're trying to install an Enterprise Portal (2004s) on SQL Server 2005. The instance of SQL Server has been installed with collation SQL_LATIN1_GENERAL_CP850_BIN instead of the required BIN2 variant. Is there any way to install the latter collation on this SQL Server instance? With SQL 2000 there was the instcoll.exe tool. We need something similar for SQL 2005.

This is very easy in SQL 2005 and can be done on individual database's. To do it in this fashion then follow these steps
1) Open up the SQL server management studio
2) Connect to the database engine
3) Expand Databases
4) Right-click on the database you want to change and select Properties
5) Click on the Options
6) Select the required collation
I hope this helps
Darrell

Problem with SQL 2005

Hi All:
After successful export with R3Load of a ECC5.00 (Kernel 6.40 Patch level 171) when we import the data into SQL2005 SP1 and after successful import into the target database, we have some inconsistencies in several DYNPROS, we got errors like this when we run several transactions:
BZW Error 2 during compression/decompression ( UNPAC)
AB0 Run-time error "DYNPRO_SYNTAX_ERROR" occurred
and in the trace files we found:
Fri Feb 23 16:12:35 2007
***LOG BZW=> error 2          on compression/decompression using UNPACK     [dbdynp#1 @ 842] [dbdynp 0842 ]
ERROR => Involved dynpro: SAPMF02D                                 - 0101
dbdynp.c     842]
ERROR => DY-SRC_READ BUFFER: any error 4 [dgdynp.c     1225]
It seems the DYNPROSOURCE table contains bad entries, but the export/import procedure was successful, we also execute "Tools for MS SQL" successfully.
Any help will be greatly appreciated...!!!
Regards,
Federico

Hello
Your error is not one I recognize but I recommend you check this note and validate your DB settings.
Note 600027 - Installing the Corrected MS SQL Server Collation
Please do not double post - the correct forum for this thread is SQL Server
N.P.C

I am trying to setup a data source for postgresql with cf10 update 14. i get a time out error retruned in less than 2 seconds. I setup a data source for MS SQL 2005 no problem.

I need a little help, what have I done wrong or not done?
Here is the error message that is returned;
Connection verification failed for data source: Archuleta_xxxxxx
java.sql.SQLException: Timed out trying to establish connection
The root cause was that: java.sql.SQLException: Timed out trying to establish connection
any ideas would be appreciated.

I see this error in your output:
2014-11-26 10:55:23,583 ERROR [ThemeAutoDeployer]
java.io.FileNotFoundException: /tmp/liferay/com/liferay/portal/deploy/dependencies/liferay-theme.tld (Too many open files)
I'm not across what the EBS recommended setting for this is, or if there is one. But try running:
ulimit -n
... and if the number is low, edit /etc/security/limits.conf , add some entries for increased "soft nofile" and "hard nofile" and run sysctl -p. See Linux & Java tips: Too many open files .

Xp_logininfo "Installation problem on windows 2003 with Sql 2005"

Hi every one
I am facing a problem during the installation of Solution Manager 4.0 on Windows 2003 server with Ms Sql 2005, I received the following error
Msg 15404, Level 16, State 19, Procedure xp_logininfo, Line 60.
Its some how look likes that the user "SID"ADM
Can any one give me a clue
thanks
Kind Regards
Sohail

Hi All,
This would solve your problem
First of all this error is MSSQL error.
When you perform an action on an instance of SQL Server that requires SQL Server to resolve the credentials of a Microsoft Windows NT domain user account, you may receive an error message that is similar
Server: Msg 8198, Level 16, State XX, Procedure <Stored Procedure Name>, Line <line Number>
Could not obtain information about Windows NT group/user '<Domain\Account Name>'.
To resolve the credentials of a Windows NT domain user account, SQL Server uses the xp_logininfo system stored procedure. Here is a list of the common scenarios where you may notice that the xp_logininfo system stored procedure fails and causes the 8198 error.
When you use an xp_sendmail extended stored procedure.
When you set up replication.
When you run a SQL Server Agent job.
SQL Server may run the xp_logininfo system stored procedure to retrieve information about the Windows domains and the user accounts, even if the user does not do so explicitly. Therefore, if you receive an 8198 error message and the error message mentions the xp_logininfo system stored procedure as the procedure, you must use SQL Profiler to trace and to troubleshoot the exact point of failure.
You can go through this link for more info...
http://support.microsoft.com/?kbid=834124
Feel Free to Revert back...
--Thanks and Regards,
Ragu
ERP,
Suzlon Energy Limted, Pune
Extn: 2638
+919370675797
I have no limits for others sky is only a reason

SAP IDES ECC5.0 (SQL 2005 Database) installation Error at Database instan.

At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
from Log file SAPCLUST
Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
(3.5.Imp): 613: error when retrieving table description for physical table AABLG.
myCluster (3.5.Imp): 614: return code received from nametab is 32
myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: code page conversion failed
rc = 2
from sappool.log
Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM (rc=32)conversion failed for row 0 of table VARKEY = ⁘
(CNV) ERROR: code page conversion failed
So please send me solution/ or any configuration need for SQL 2005 / installation guide thanks

This may be hard disk problem, some file not able to write on HDD.
Regards
Rajnish

I downloaded Mozilla 4 and tried to use it then, I had to delete it and go back to 3.6 vs now I am having problems with my MS SQL 2005 why? What was changed to enable Mozilla 4 to sync with MS SQL and how do I get it corrected?

After, trying Mozilla 4 beta and then having to go back to a previous vs of Mozilla 3.6.11 my MS OLE DB Provider for SQL 2005 Server has this error message '80040E57' I am using Windows 7 which was pre-installed on my new computer. I do not know how to fix it?

The latest flash player release is 11,0,1,152.
Can you upgrade to this version and see whether the crash stil exists?
Go to get.adobe.com/flashplayer to download and install flash player.
In case you need direct link to installer/uninstaller, please go to http://forums.adobe.com/message/3952360#3952360 to find them.
saranlee wrote:
My computer crashes repeatedly and I get the message pages are not responding do you want to stop, and/or shockwave is not responding do you want to stop. I have Windows XP Service Pack 3, I am having the same issues whether I use Internet Explorer, Google Chrome, or Mozilla Firefox. My HP Pavilion Desktop has 504 MB of Ram and I am using high speed internet connection. Because it was crashing so much, I used the uninstall program for Flash player to uninstall Flash, I checked my registry and removed anything I saw that was Flash. I then uninstalled Google Chrome and Mozilla Firefox, then I reinstalled the most recent versions from their websites. I did the same for FlashPlayer and Shockwave Flash. I went to the Adobe website and had them check to see if it was working and it shows I have FlashPlayer 10.3.181.36. The page that shows which version of flash player goes with Windows XP states that I should have 10.3.181.34 (This is what I thought I had before I updated, I was having the same problems). When I went into my computer to see what version I have, it shows 11.5.9.620 Activex and both Flash Player and Flash Player Object is listed as 10.3.181.34. My firewall for Windows is set to medium. I also am running Norton Internet Security. It takes anywhere from 3-6minutes for some of my games to load, and I have to refresh at least 3-4 times in order to play. When I do start to play it freezes frequently and I use escape to free it up. This has been going on for a month. I have no idea what to do. I am not very computer savy and I have been learning as I go.

Cluster Installation - SQL 2005 / 2003 - Creating cluster group

Hi All,
I am working on the cluster Installation in our environment and facing some issues at the time of installing first node MSCS Installation. let me summarize the activities done so far
Environment Details
Physical Disk :
G: (Physical Disk - SAN )
I : (Physical Disk - SAN )
C: Local disk
Q: (Physical Disk Quorum - SAN )
F: (Database and logs)
-- > SCS installed locally in the server in G drive
Virtual Hostname and IP : SeparateIP & cluster1
Node 1: Hostname and separate IP
Node 2 : hostname and Separate IP
Installed MSCS service and tested the same - its working fine
Installed SQL 2005 database in cluster mode and its working fine
Started installing SAP
Step 1: Installation of SCS instance in node A (Used F drive) - Successfull Installed
Step 2: Installation of First node MSCS in node A
Here I am facing an issue, in the end phase of the installation it will ask for creating cluster group -- > There I need to define the Global disk as F (Which is defined at the time of installing SCS instance) - But i dont see that disk is available in the drop down box .
Is there any other workaround to bring the Global disk while creating the cluster group (First node MSCS installation)
Looking forward for your suggestions
Thanks and Regards
Vijay

Regret for the late update
112266 solved my problem and In my case, I have bisected the disk as two but in the cluster environment that should not be the case. Ensure the the same in disk management
Regards
Vijay

Problem with NW04s SR2 installation with MS SQL Server 2000 SP4

Im struggling with the NW04s installation with MS SQL Server 2000.
The installation stops at the step Create/modify database schema SAPJ2EDB.
The following error/info from log file,
INFO 2007-06-06 12:02:33 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doConfiguration of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|NW_MSS_SRVCFG|ind|ind|ind|ind|6|0.
INFO 2007-06-06 12:02:35 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doTempdb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doSwitch of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:36 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doTempDBAnalyze of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:37 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doTempDBBeforeRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:38 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doRestartServer of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:02:58 [ianxbservi.cpp:697]
 CIaNtServices::stop(const map<iastring,iastring>&)
The service 'MSSQLSERVER' stopped successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:10 [ianxbservi.cpp:632]
 CIaNtServices::start(const map<iastring,iastring>&)
The service 'MSSQLSERVER' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [ianxbservi.cpp:632]
 CIaNtServices::start(const map<iastring,iastring>&)
The service 'SQLSERVERAGENT' started successfully on host 'GBCZ672C'.
INFO 2007-06-06 12:03:21 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doTempDBAfterRestart of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:22 [iaxxgenimp.cpp:632]
 showDialog()
Execute step doChangeTempSetNewSize of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssDowntimeConfig|ind|ind|ind|ind|7|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
 showDialog()
Execute step CheckParameters of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:39 [iaxxgenimp.cpp:632]
 showDialog()
Execute step CreateDirectories of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
INFO 2007-06-06 12:03:40 [iaxxgenimp.cpp:632]
 showDialog()
Execute step CreateDatabase of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0.
ERROR 2007-06-06 12:03:40 [iaxxgenimp.cpp:731]
 showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
ERROR 2007-06-06 12:03:40
 lib=iamodmssql module=CIaNtMssDmo
MDB-05053 Errors when executing sql command: If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.
INFO 2007-06-06 12:04:04 [iaxxgenimp.cpp:774]
 showDialog()
An error occured and the user decided to retry the current step: "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase".
ERROR 2007-06-06 12:04:05 [iaxxgenimp.cpp:731]
 showDialog()
FCO-00011 The step CreateDatabase with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSchemaCreate|ind|ind|ind|ind|9|0|CreateDatabase was executed with status ERROR .
Please let me know if you can help or if there is any other way around.
Many Thanks in advance.
Ritin Jain

Hi All,
I was not able to solve the problem with MS SQL 2000, but I was able to resolve the issue with MS SQL 2005.
You have to chhose the following settings while instalation,
Service Account - Select one of the following options:
1) Use the built-in System account for each service and choose Local system or Network Service.
2) Use a domain user account, and enter the user name and password.
Under Start services at the end of setup make sure that SQL Server and SQL Server Agent are selected.
Authentication Mode
1) Select Mixed Mode (Windows Authentication and SQL Server Authentication).
This mode is required for a Java or ABAP+Java system.
If you choose this mode, you have to set the password for the sa login.
Note: The password for the sa login must comply with the Windows password policy.
Collation Settings
1) Select SQL collations (used for compatibility with previous versions of SQL Server).
2) From the drop-down list select Binary order based on code point comparison, for use with the 850 (Multilingual) Character Set.
I hope this helps!

BI JDBC connection failure with MS SQL 2005 - but Portal JDBC is working

I am a portal novice.
I wanted to get tables in the visual composer. so i created the protal jdbc connection to MS SQL 2005. which is working fine.
Later i found i need BI jdbc for retreving tables from sql server. when i followed all the steps in the how to document, my connection test is failing. below is the log.
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure that Single Sign-On is configured correctly
can any help me there please.
- Points will he awarded for inputs.
thanks
-ravi

Swapnil,
Thanks for the reply, but the thread is completely different from what i am looking for.
can anybody throw some suggestion at my problem
-ravi

Installation failed SQL 2005

Hi all ~ I have problem on installing SQL 2005: please have a look on the following log:
=== Verbose logging started: 2/23/2015 10:59:24 Build type: SHIP UNICODE 4.05.6002.00 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe ===
MSI (c) (FC:98) [10:59:24:019]: Resetting cached policy values
MSI (c) (FC:98) [10:59:24:019]: Machine policy value 'Debug' is 0
MSI (c) (FC:98) [10:59:24:019]: ******* RunEngine:
 ******* Product: {90A40409-6000-11D3-8CFE-0150048383C9}
 ******* Action:
 ******* CommandLine: **********
MSI (c) (FC:98) [10:59:24:020]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (FC:98) [10:59:24:020]: Grabbed execution mutex.
MSI (c) (FC:98) [10:59:24:022]: Cloaking enabled.
MSI (c) (FC:98) [10:59:24:022]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (FC:98) [10:59:24:022]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (EC:B8) [10:59:24:030]: Running installation inside multi-package transaction {90A40409-6000-11D3-8CFE-0150048383C9}
MSI (s) (EC:B8) [10:59:24:030]: Grabbed execution mutex.
MSI (s) (EC:5C) [10:59:24:032]: Resetting cached policy values
MSI (s) (EC:5C) [10:59:24:032]: Machine policy value 'Debug' is 0
MSI (s) (EC:5C) [10:59:24:032]: ******* RunEngine:
 ******* Product: {90A40409-6000-11D3-8CFE-0150048383C9}
 ******* Action:
 ******* CommandLine: **********
MSI (s) (EC:5C) [10:59:24:032]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (EC:5C) [10:59:24:038]: SRSetRestorePoint skipped for this transaction.
MSI (s) (EC:5C) [10:59:24:039]: End dialog not enabled
MSI (s) (EC:5C) [10:59:24:039]: Original package ==> C:\WINDOWS\Installer\180ca.msi
MSI (s) (EC:5C) [10:59:24:039]: Package we're running from ==> C:\WINDOWS\Installer\180ca.msi
MSI (s) (EC:5C) [10:59:24:043]: APPCOMPAT: looking for appcompat database entry with ProductCode '{90A40409-6000-11D3-8CFE-0150048383C9}'.
MSI (s) (EC:5C) [10:59:24:043]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (EC:5C) [10:59:24:050]: MSCOREE already loaded, using loaded copy
MSI (s) (EC:5C) [10:59:24:054]: Opening existing patch 'C:\WINDOWS\Installer\57492f7.msp'.
MSI (s) (EC:5C) [10:59:24:054]: Note: 1: 2203 2: C:\WINDOWS\Installer\57492f7.msp 3: -2147287038
MSI (s) (EC:5C) [10:59:24:054]: Couldn't find local patch 'C:\WINDOWS\Installer\57492f7.msp'. Looking for it at its source.
MSI (s) (EC:5C) [10:59:24:054]: Resolving Patch source.
MSI (s) (EC:5C) [10:59:24:054]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (EC:5C) [10:59:24:054]: User policy value 'DisableMedia' is 0
MSI (s) (EC:5C) [10:59:24:054]: Machine policy value 'AllowLockdownMedia' is 0
MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Media enabled only if package is safe.
MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Looking for sourcelist for product {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
MSI (s) (EC:5C) [10:59:24:054]: SOURCEMGMT: Adding {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}; to potential sourcelist list (pcode;disk;relpath).
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Now checking product {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Media is enabled for product.
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Attempting to use LastUsedSource from source list.
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Processing net source list.
MSI (s) (EC:5C) [10:59:24:055]: Note: 1: 1402 2: UNKNOWN\Net 3: 2
MSI (s) (EC:5C) [10:59:24:055]: Note: 1: 1706 2: -2147483647 3: OWC11SP3.MSP
MSI (s) (EC:5C) [10:59:24:055]: SOURCEMGMT: Processing media source list.
MSI (s) (EC:5C) [10:59:25:063]: SOURCEMGMT: Resolved source to: 'OWC11SP3.MSP'
MSI (s) (EC:5C) [10:59:51:327]: Note: 1: 1314 2: OWC11SP3.MSP
MSI (s) (EC:5C) [10:59:51:327]: Unable to create a temp copy of patch 'OWC11SP3.MSP'.
MSI (s) (EC:5C) [10:59:51:327]: Searching provided command line patches for patch code {34E1EB8F-BDB2-475C-BD80-A86217C41B4D}
MSI (s) (EC:5C) [10:59:51:329]: Note: 1: 1708
MSI (s) (EC:5C) [10:59:51:329]: Product: Microsoft Office 2003 Web Components -- Installation failed.
MSI (s) (EC:5C) [10:59:51:330]: Windows Installer installed the product. Product Name: Microsoft Office 2003 Web Components. Product Version: 11.0.6558.0. Product Language: 1033. Installation success or error status: 1635.
MSI (s) (EC:5C) [10:59:51:332]: MainEngineThread is returning 1635
MSI (s) (EC:B8) [10:59:51:332]: No System Restore sequence number for this installation.
This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer update package.
C:\WINDOWS\Installer\180ca.msi
MSI (s) (EC:B8) [10:59:51:333]: User policy value 'DisableRollback' is 0
MSI (s) (EC:B8) [10:59:51:333]: Machine policy value 'DisableRollback' is 0
MSI (s) (EC:B8) [10:59:51:333]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (EC:B8) [10:59:51:334]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (EC:B8) [10:59:51:334]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (EC:B8) [10:59:51:335]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (EC:B8) [10:59:51:335]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (EC:B8) [10:59:51:335]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (EC:B8) [10:59:51:335]: Restoring environment variables
MSI (c) (FC:98) [10:59:51:337]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (FC:98) [10:59:51:337]: MainEngineThread is returning 1635
=== Verbose logging stopped: 2/23/2015 10:59:51 ===
Please help help

this problem solved, i replace back the .msi to the windows\installer, now i have another probelm::
=== Verbose logging started: 2/23/2015 14:02:33 Build type: SHIP UNICODE 4.05.6002.00 Calling process: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\setup.exe ===
MSI (c) (44:50) [14:02:33:615]: Resetting cached policy values
MSI (c) (44:50) [14:02:33:615]: Machine policy value 'Debug' is 0
MSI (c) (44:50) [14:02:33:615]: ******* RunEngine:
 ******* Product: {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
 ******* Action:
 ******* CommandLine: **********
MSI (c) (44:50) [14:02:33:616]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (44:50) [14:02:33:616]: Grabbed execution mutex.
MSI (c) (44:50) [14:02:33:618]: Cloaking enabled.
MSI (c) (44:50) [14:02:33:618]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (44:50) [14:02:33:619]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:9C) [14:02:33:626]: Running installation inside multi-package transaction {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
MSI (s) (B8:9C) [14:02:33:626]: Grabbed execution mutex.
MSI (s) (B8:64) [14:02:33:626]: Resetting cached policy values
MSI (s) (B8:64) [14:02:33:626]: Machine policy value 'Debug' is 0
MSI (s) (B8:64) [14:02:33:626]: ******* RunEngine:
 ******* Product: {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
 ******* Action:
 ******* CommandLine: **********
MSI (s) (B8:64) [14:02:33:626]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (B8:64) [14:02:33:632]: SRSetRestorePoint skipped for this transaction.
MSI (s) (B8:64) [14:02:33:632]: End dialog not enabled
MSI (s) (B8:64) [14:02:33:633]: Original package ==> C:\WINDOWS\Installer\23e28752.msi
MSI (s) (B8:64) [14:02:33:633]: Package we're running from ==> C:\WINDOWS\Installer\23e28752.msi
MSI (s) (B8:64) [14:02:33:637]: APPCOMPAT: looking for appcompat database entry with ProductCode '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'.
MSI (s) (B8:64) [14:02:33:637]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (B8:64) [14:02:33:644]: MSCOREE already loaded, using loaded copy
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisablePatch' is 0
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (B8:64) [14:02:33:648]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (B8:64) [14:02:33:649]: APPCOMPAT: looking for appcompat database entry with ProductCode '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'.
MSI (s) (B8:64) [14:02:33:649]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (B8:64) [14:02:33:649]: Transforms are not secure.
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0018_SV53749_MSXML6_1.log'.
MSI (s) (B8:64) [14:02:33:650]: Command Line: STPSETUPTHREADID=1484 STPSETUPPROCESSID=9540 EXTERNALCONTROL=1 ADDLOCAL=ALL SKIPPENDINGREBOOTCHECK=1 APPGUID={FFFA78A7-BD51-4255-8470-C4D4A85B49F5} REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Program Files\Microsoft
SQL Server\90\Setup Bootstrap CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=9540
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{EE6525FC-1729-4E76-A8C1-12C756BA0AD0}'.
MSI (s) (B8:64) [14:02:33:650]: Product Code passed to Engine.Initialize: '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
MSI (s) (B8:64) [14:02:33:650]: Product Code from property table before transforms: '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
MSI (s) (B8:64) [14:02:33:650]: Product Code from property table after transforms: '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}'
MSI (s) (B8:64) [14:02:33:650]: Product registered: entering maintenance mode
MSI (s) (B8:64) [14:02:33:650]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is admin assigned: LocalSystem owns the publish key.
MSI (s) (B8:64) [14:02:33:650]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is managed.
MSI (s) (B8:64) [14:02:33:650]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding ProductState property. Its value is '5'.
MSI (s) (B8:64) [14:02:33:650]: PROPERTY CHANGE: Adding ProductToBeRegistered property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:651]: Package name retrieved from configuration data: 'msxml6.msi'
MSI (s) (B8:64) [14:02:33:651]: Determined that existing product (either this product or the product being upgraded with a patch) is installed per-machine.
MSI (s) (B8:64) [14:02:33:654]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (B8:64) [14:02:33:654]: Machine policy value 'DisableMsi' is 1
MSI (s) (B8:64) [14:02:33:654]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (B8:64) [14:02:33:654]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (B8:64) [14:02:33:654]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is admin assigned: LocalSystem owns the publish key.
MSI (s) (B8:64) [14:02:33:654]: Product {E46A76D1-9FB9-4770-BA24-3975EF4D120A} is managed.
MSI (s) (B8:64) [14:02:33:654]: Running product '{E46A76D1-9FB9-4770-BA24-3975EF4D120A}' with elevated privileges: Product is assigned.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding STPSETUPTHREADID property. Its value is '1484'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding STPSETUPPROCESSID property. Its value is '9540'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding EXTERNALCONTROL property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding ADDLOCAL property. Its value is 'ALL'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding SKIPPENDINGREBOOTCHECK property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding APPGUID property. Its value is '{FFFA78A7-BD51-4255-8470-C4D4A85B49F5}'.
MSI (s) (B8:64) [14:02:33:654]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '9540'.
MSI (s) (B8:64) [14:02:33:655]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is '2bacf19a1da7c4438b188852d7df058c'.
MSI (s) (B8:64) [14:02:33:655]: RESTART MANAGER: Session opened.
MSI (s) (B8:64) [14:02:33:655]: TRANSFORMS property is now:
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding PRODUCTLANGUAGE property. Its value is '1033'.
MSI (s) (B8:64) [14:02:33:655]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (B8:64) [14:02:33:658]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming
MSI (s) (B8:64) [14:02:33:660]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Favorites
MSI (s) (B8:64) [14:02:33:662]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (B8:64) [14:02:33:663]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Documents
MSI (s) (B8:64) [14:02:33:665]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (B8:64) [14:02:33:667]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (B8:64) [14:02:33:668]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (B8:64) [14:02:33:671]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (B8:64) [14:02:33:671]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (B8:64) [14:02:33:673]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Local
MSI (s) (B8:64) [14:02:33:675]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Pictures
MSI (s) (B8:64) [14:02:33:679]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (B8:64) [14:02:33:681]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (B8:64) [14:02:33:682]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (B8:64) [14:02:33:685]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (B8:64) [14:02:33:687]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (B8:64) [14:02:33:691]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (B8:64) [14:02:33:693]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (B8:64) [14:02:33:695]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (B8:64) [14:02:33:697]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (B8:64) [14:02:33:698]: SHELL32::SHGetFolderPath returned: C:\Users\Administrator\Desktop
MSI (s) (B8:64) [14:02:33:701]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (B8:64) [14:02:33:701]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (B8:64) [14:02:33:702]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (B8:64) [14:02:33:711]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Sun Life'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding COMPANYNAME property. Its value is 'Sun Life Hong Kong Limited'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding Installed property. Its value is '00:00:00'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\WINDOWS\Installer\23e28752.msi'.
MSI (s) (B8:64) [14:02:33:711]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'C:\WINDOWS\Installer\23e28752.msi'.
MSI (s) (B8:64) [14:02:33:711]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (B8:64) [14:02:33:711]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (B8:64) [14:02:33:711]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (B8:64) [14:02:33:712]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (B8:64) [14:02:33:712]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:64) [14:02:33:712]: User policy value 'DisableRollback' is 0
MSI (s) (B8:64) [14:02:33:712]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 2/23/2015 14:02:33 ===
MSI (s) (B8:64) [14:02:33:713]: PROPERTY CHANGE: Adding Preselected property. Its value is '1'.
MSI (s) (B8:64) [14:02:33:713]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (B8:64) [14:02:33:713]: Doing action: INSTALL
Action start 14:02:33: INSTALL.
MSI (s) (B8:64) [14:02:33:717]: Running ExecuteSequence
MSI (s) (B8:64) [14:02:33:717]: Doing action: SkipInstallCA
MSI (s) (B8:64) [14:02:33:720]: Note: 1: 2235 2: 3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SkipInstallCA'
MSI (s) (B8:B8) [14:02:33:730]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI92BC.tmp, Entrypoint: SkipInstall
MSI (s) (B8:B0) [14:02:33:730]: Generating random cookie.
MSI (s) (B8:B0) [14:02:33:743]: Created Custom Action Server with PID 8820 (0x2274).
MSI (s) (B8:20) [14:02:33:788]: Running as a service.
MSI (s) (B8:20) [14:02:33:791]: Hello, I'm your 32bit Impersonated custom action server.
Action start 14:02:33: SkipInstallCA.
This package is not supported on this operating system.
Action ended 14:02:33: SkipInstallCA. Return value 3.
Action ended 14:02:33: INSTALL. Return value 3.
Property(S): ProductCode = {E46A76D1-9FB9-4770-BA24-3975EF4D120A}
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductVersion = 6.20.2016.0
Property(S): ProductLanguage = 1033
Property(S): UpgradeCode = {1B117BA7-5BC1-419E-820E-7D4F3F412C7B}
Property(S): ARPPRODUCTICON = ARPIco
Property(S): PIDTemplate = 53934<````=````=````=````=`````>@@@@@
Property(S): PROMPTROLLBACKCOST = P
Property(S): DiskPrompt = [1]
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): InstallMode = Typical
Property(S): ErrorIcon = ErrorIco
Property(S): SuccessIcon = SuccessIco
Property(S): WarningIcon = WarningIco
Property(S): LicenseIcon = LicenseIco
Property(S): SetupIcon = SetupIco
Property(S): CompleteIcon = CompleteIco
Property(S): CustomIcon = CustomIco
Property(S): RepairIcon = RepairIco
Property(S): RemoveIcon = RemoveIco
Property(S): ModifyIcon = ModifyIco
Property(S): NewIcon = NewIco
Property(S): UpIcon = UpIco
Property(S): DialogBanner = BannerBmp
Property(S): WelcomeBmp = WelcomeBmp
Property(S): ApplicationUsers = AllUsers
Property(S): Details = 0
Property(S): AgreeToLicense = No
Property(S): _IsMaintenance = Reinstall
Property(S): _IsMaintenance2 = Modify
Property(S): ReinstallModeText = omus
Property(S): Display_IsBitmapDlg = 1
Property(S): Interrupted = 0
Property(S): ProductID = none
Property(S): ISENABLEDWUSFINISHDIALOG = 1
Property(S): SQLServerText1 = 0
Property(S): SQLServerVersionText1 = 0
Property(S): SQLServerVersionText2 = 0
Property(S): SQLServerVersionText3 = 0
Property(S): CA_ERRORCOUNT = 0
Property(S): CA_WARNINGCOUNT = 0
Property(S): CA_SUCCESSCOUNT = 0
Property(S): MINIMUMOS = true
Property(S): UI_SHOWCOPYRIGHT = yes
Property(S): ShowUserRegistrationDlg = 1
Property(S): ErrorDialog = ErrorDlg
Property(S): DefaultUIFont = Tahoma8
Property(S): VersionNT = 600
Property(S): ARPHELPLINK = http://support.microsoft.com/kb/2758696
Property(S): SecureCustomProperties = NEWERFOUND.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1;OLDERFOUND.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1;OLDERFOUND2.72DE5BCD_5CB0_4335_B118_AB4C4DA70AE1
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): ButtonTextStyle = {\ButtonTextStyle}
Property(S): DlgTextStyle = {\DlgTextStyle}
Property(S): DlgTextStyleB = {\DlgTextStyleB}
Property(S): DlgTitleStyle = {\DlgTitleStyle}
Property(S): DlgTitleStyleB = {\DlgTitleStyleB}
Property(S): FixedStyle = {\FixedStyle}
Property(S): Installed = 00:00:00
Property(S): COMPANYNAME = Sun Life Hong Kong Limited
Property(S): USERNAME = Sun Life
Property(S): DialogTitleSetup = Setup
Property(S): DialogTitlePatch = Patch
Property(S): DialogTitleUpgrade = Upgrade
Property(S): Text_ArrowLeft = <
Property(S): Text_ArrowRight = >
Property(S): ButtonText_Next = Next
Property(S): ButtonText_Next_Hot = &Next
Property(S): ButtonText_Cancel = Cancel
Property(S): ButtonText_Cancel_Hot = &Cancel
Property(S): ButtonText_Back = Back
Property(S): ButtonText_Back_Hot = &Back
Property(S): ButtonText_Finish = Finish
Property(S): ButtonText_Finish_Hot = &Finish
Property(S): ButtonText_Update = Update >
Property(S): ButtonText_Update_Hot = &Update >
Property(S): ButtonText_Ok = OK
Property(S): ButtonText_Ok_Hot = &OK
Property(S): ButtonText_Yes = Yes
Property(S): ButtonText_Yes_Hot = &Yes
Property(S): ButtonText_No = No
Property(S): ButtonText_No_Hot = &No
Property(S): ButtonText_Abort = Abort
Property(S): ButtonText_Abort_Hot = &Abort
Property(S): ButtonText_Ignore = Ignore
Property(S): ButtonText_Ignore_Hot = &Ignore
Property(S): ButtonText_Retry = Retry
Property(S): ButtonText_Retry_Hot = &Retry
Property(S): ButtonText_Change = Change...
Property(S): ButtonText_Change_Hot = &Change...
Property(S): ButtonText_Help = Help
Property(S): ButtonText_Help_Hot = &Help
Property(S): ButtonText_Install = Install
Property(S): ButtonText_Install_Hot = &Install
Property(S): ButtonText_Exit = Exit
Property(S): ButtonText_Exit_Hot = &Exit
Property(S): ButtonText_Remove = Remove
Property(S): ButtonText_Remove_Hot = &Remove
Property(S): ButtonText_Space = Space
Property(S): ButtonText_Space_Hot = &Space
Property(S): ButtonText_Browse = Browse...
Property(S): ButtonText_Browse_Hot = Bro&wse...
Property(S): ButtonText_DiskCost = Disk Cost...
Property(S): ButtonText_DiskCost_Hot = &Disk Cost...
Property(S): LabelText_Status = Status
Property(S): LabelText_SerialNumber = &Serial Number:
Property(S): LabelText_UserName = &User Name
Property(S): LabelText_PersonName = Name
Property(S): LabelText_PersonOrganization = Company
Property(S): LabelText_InstallTo = Install to
Property(S): LabelText_Modify = &Modify
Property(S): LabelText_Repair = Re&pair
Property(S): LabelText_Remove = &Remove
Property(S): LabelText_Complete = &Complete
Property(S): LabelText_Custom = Cu&stom
Property(S): LabelText_NetworkLocation = &Network location:
Property(S): LabelText_LookIn = &Look in
Property(S): LabelText_FolderName = &Folder name
Property(S): LabelText_FeatureDescription = Feature description
Property(S): LabelText_CopyFilesFrom = Copy Files from
Property(S): LabelText_InstallFor = Install this application for
Property(S): HeadText_AdminWelcome = Welcome to the Install Wizard for
Property(S): HeadText_InstallWelcome = Welcome to the Install Wizard for
Property(S): HeadText_WelcomePatch = Welcome to the Patch for
Property(S): HeadText_SetupWelcome = Welcome to the
Property(S): HeadText_SetupWelcome2 = Setup
Property(S): HeadText_ResumeInstall = Resuming the Install Wizard for
Property(S): HeadText_SetupInterrupted = Setup Interrupted
Property(S): HeadText_LicenseAgreement = License Agreement
Property(S): HeadText_FeatureSelection = Feature Selection
Property(S): HeadText_NetworkLocation = Network Location
Property(S): HeadText_ProgramMaintenance = Program Maintenance
Property(S): HeadText_DiskSpaceRequirements = Disk Space Requirements
Property(S): HeadText_FilesInUse = Files in Use
Property(S): HeadText_DatabaseFolder = Database Folder
Property(S): HeadText_RegistrationInformation = Registration Information
Property(S): HeadText_CompletingSetup = Completing the
Property(S): HeadText_CompletingSetup2 = Setup
Property(S): HeadText_InstallingProduct = Installing
Property(S): HeadText_UninstallProduct = Uninstalling
Property(S): HeadText_ChangeDestinationFolder = Change Current Destination Folder
Property(S): HeadText_ReadyInstall = Ready to Install the Program
Property(S): HeadText_ReadyRepair = Ready to Repair the Program
Property(S): HeadText_ReadyModify = Ready to Modify the Program
Property(S): HeadText_RemoveProgram = Remove the Program
Property(S): HeadText_OutOfDiskSpace = Out of Disk Space
Property(S): DescText_FilesInUse = Some files that need to be updated are currently in use.
Property(S): DescText_RegistrationInformation = The following information will personalize your installation.
Property(S): DescText_ServerImage = Setup will create a server image of
Property(S): DescText_ServerImage2 = at a specified network location. To continue, click Next.
Property(S): DescText_InstallModifyRemove = Setup helps you install, modify or remove
Property(S): DescText_InstallModifyRemove2 = . To continue, click Next.
Property(S): DescText_PatchInstall = The Install Wizard will install the Patch for
Property(S): DescText_PatchInstall2 = on your computer. To continue, click Update.
Property(S): DescText_WizardComplete = The Install Wizard will complete the installation of
Property(S): DescText_WizardComplete2 = on your computer. To continue, click Next.
Property(S): DescText_CompleteSuspended = The Install Wizard will complete the suspended installation of
Property(S): DescText_CompleteSuspended2 = on your computer. To continue, click Next.
Property(S): DescText_SuccessfulInstallation = Setup has installed
Property(S): DescText_SuccessfulInstallation2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRemove = Setup has removed
Property(S): DescText_SuccessfulRemove2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulRepair = Setup has repaired
Property(S): DescText_SuccessfulRepair2 = successfully. Click Finish to exit.
Property(S): DescText_SuccessfulModify = Setup has modified
Property(S): DescText_SuccessfulModify2 = successfully. Click Finish to exit.
Property(S): DescText_SetupInterrupted = Setup was interrupted before
Property(S): DescText_SetupInterrupted2 = could be completely installed.
Property(S): DescText_PreparingSetup = Setup is preparing the Install Wizard which will guide you through the program setup process. Please wait.
Property(S): DescText_FeatureSelection = Select the program features you want installed.
Property(S): DescText_ProgramFeaturesInstall = The program features you selected are being installed.
Property(S): DescText_ProgramFeaturesUninstall = The program features you selected are being uninstalled.
Property(S): DescText_ReadLicense = Please read the following license agreement carefully.
Property(S): DescText_SpecifyNetworkLocation = Specify a network location for the server image of the product.
Property(S): DescText_BrowseDestination = Browse to the destination folder.
Property(S): DescText_ModifyRepairRemove = Repair or remove the program.
Property(S): DescText_ReadyInstallation = Setup is ready to begin installation.
Property(S): DescText_ChosenRemove = You have chosen to remove the program from your system.
Property(S): DescText_DiskSpaceRequirements = The disk space required for the installation of the selected features.
Property(S): DescText_DiskExceedsAvailable = Disk space required for the installation exceeds available disk space.
Property(S): Text_ReRunSetup = Your system has not been modified. To complete installation at another time, please run setup again.
Property(S): Text_FinishExit = Click Finish to exit Setup.
Property(S): Text_RestoreState = You can either keep any existing installed elements on your system to continue this installation at a later time or you can restore your system to its original state prior to the installation.
Property(S): Text_RestoreClick = Click Restore or Continue Later to exit Setup.
Property(S): Text_InstallWait = Please wait while the Install Wizard installs
Property(S): Text_InstallWait2 = . This may take several minutes.
Property(S): Text_UninstallWaitText = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWaitText2 = . This may take several minutes.
Property(S): Text_UninstallWait = Please wait while the Install Wizard uninstalls
Property(S): Text_UninstallWait2 = . This may take several minutes.
Property(S): Text_ProgressDone = Progress done
Property(S): Text_Copyright = WARNING: This program is protected by copyright law and international treaties.
Property(S): Text_BeginInstallation = Click Install to begin the installation.
Property(S): Text_ReviewChange = If you want to review or change any of your installation settings, click Back. Click Cancel to exit Setup.
Property(S): Text_AlterFeatureInstall = Click an icon in the following list to change how a feature is installed.
Property(S): Text_ConfirmExit = The installation is not yet complete. Are you sure you want to exit?
Property(S): Text_FeatureSelectionDescription = This feature requires 4 MB on your hard drive.
Property(S): Text_EnterNetworkLocation = Enter the network location or click Change to browse to a location. Click Install to create a server image of
Property(S): Text_EnterNetworkLocation2 = at the specified network location or click Cancel to exit Setup.
Property(S): Text_SelectDifferentDrive = The highlighted volumes do not have enough disk space available for the currently selected features. You can remove files from the highlighted volumes, choose to install less features onto local drives, or select different
destination drives.
Property(S): Text_RepairInstallationErrors = Repair installation errors in the program. This option fixes missing or corrupt files, shortcuts, and registry entries.
Property(S): Text_RemoveFromComputer = Remove
Property(S): Text_RemoveFromComputer2 = from your computer.
Property(S): Text_UsingFilesRetry = The following applications are using files that need to be updated by this setup. Close these applications and click Retry to continue.
Property(S): Text_ClickRemove = Click Remove to remove
Property(S): Text_ClickRemove2 = from your computer. After removal, this program will no longer be available for use.
Property(S): Text_ReviewChangeBack = If you want to review or change any settings, click Back.
Property(S): Text_AllUsers = &Anyone who uses this computer (all users)
Property(S): Text_OnlyMe = Only for &me ([USERNAME])
Property(S): Text_NotAcceptTerms = I &do not accept the terms in the license agreement
Property(S): Text_AcceptTerms = I &accept the terms in the license agreement
Property(S): Text_RegInfoNameAndOrg = Enter your name and the name of your organization in the fields below.
Property(S): Text_RegInfoOrg = Enter the name of your organization in the field below.
Property(S): Upgrade_Confirmation = A lower version of this product has been detected on your system. Would you like to upgrade your existing installation?
Property(S): AdminMessage = Setup requires user to be in the administrator group in order to continue the installation process. Setup is aborting as the current user is not in the administrator group.
Property(S): SupportedOSMessage = Installation of this product failed because it is not supported on this operating system. For information on supported configurations, see the product documentation.
Property(S): ShortCutText = MSXML 6 Service Pack 2 (KB2758696)
Property(S): DialogTitle = MSXML 6 Service Pack 2 (KB2758696) Setup
Property(S): ProductName = MSXML 6 Service Pack 2 (KB2758696)
Property(S): ShortName = MSXML 6 Service Pack 2 (KB2758696)
Property(S): WrongPackage = This MSXML6 Service Pack 2 (KB2758696) package is not supported on the current processor type.
Property(S): DialogPatchTitle = MSXML 6 Service Pack 2 (KB2758696) Patch
Property(S): SystemFolder = C:\Windows\system32\
Property(S): WdSfpCaMainModId.41646F16_4E6C_4E96_BF1B_772105414B9D = 86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): AppGuidRegKey = Wdsfpca_Uninstall_RegKey.86F857F6_A743_463D_B2FE_98CB5F727E09
Property(S): MsiLogFileLocation = C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Files\SQLSetup0018_SV53749_MSXML6_1.log
Property(S): PackageCode = {EE6525FC-1729-4E76-A8C1-12C756BA0AD0}
Property(S): ProductState = 5
Property(S): ProductToBeRegistered = 1
Property(S): STPSETUPTHREADID = 1484
Property(S): STPSETUPPROCESSID = 9540
Property(S): EXTERNALCONTROL = 1
Property(S): ADDLOCAL = ALL
Property(S): SKIPPENDINGREBOOTCHECK = 1
Property(S): APPGUID = {FFFA78A7-BD51-4255-8470-C4D4A85B49F5}
Property(S): REBOOT = ReallySuppress
Property(S): CURRENTDIRECTORY = C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 9540
Property(S): MsiRestartManagerSessionKey = 2bacf19a1da7c4438b188852d7df058c
Property(S): PRODUCTLANGUAGE = 1033
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 4.05
Property(S): WindowsBuild = 6002
Property(S): ServicePackLevel = 2
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System16Folder = C:\Windows\system\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\ADMINI~1\AppData\Local\Temp\
Property(S): CommonFilesFolder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\Users\Administrator\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\Administrator\Favorites\
Property(S): NetHoodFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\Administrator\Documents\
Property(S): PrintHoodFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\Administrator\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\Administrator\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\Administrator\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 6
Property(S): PhysicalMemory = 2047
Property(S): VirtualMemory = 2390
Property(S): AdminUser = 1
Property(S): LogonUser = Administrator
Property(S): UserSID = S-1-5-21-752955860-2970973076-2057269693-500
Property(S): UserLanguageID = 1033
Property(S): ComputerName = SV53749
Property(S): SystemLanguageID = 1033
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 14:02:33
Property(S): Date = 2/23/2015
Property(S): MsiNetAssemblySupport = 2.0.50727.4016
Property(S): MsiWin32AssemblySupport = 6.0.6001.18000
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): Privileged = 1
Property(S): DATABASE = C:\WINDOWS\Installer\23e28752.msi
Property(S): OriginalDatabase = C:\WINDOWS\Installer\23e28752.msi
Property(S): UILevel = 2
Property(S): Preselected = 1
Property(S): ACTION = INSTALL
MSI (s) (B8:64) [14:02:33:948]: Note: 1: 1729
MSI (s) (B8:64) [14:02:33:948]: Product: MSXML 6 Service Pack 2 (KB2758696) -- Configuration failed.
MSI (s) (B8:64) [14:02:33:949]: Windows Installer reconfigured the product. Product Name: MSXML 6 Service Pack 2 (KB2758696). Product Version: 6.20.2016.0. Product Language: 1033. Reconfiguration success or error status: 1603.
MSI (s) (B8:64) [14:02:33:951]: Deferring clean up of packages/files, if any exist
MSI (s) (B8:64) [14:02:33:951]: MainEngineThread is returning 1603
MSI (s) (B8:9C) [14:02:33:952]: RESTART MANAGER: Session closed.
MSI (s) (B8:9C) [14:02:33:952]: No System Restore sequence number for this installation.
=== Logging stopped: 2/23/2015 14:02:33 ===
MSI (s) (B8:9C) [14:02:33:952]: User policy value 'DisableRollback' is 0
MSI (s) (B8:9C) [14:02:33:952]: Machine policy value 'DisableRollback' is 0
MSI (s) (B8:9C) [14:02:33:952]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (B8:9C) [14:02:33:953]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:9C) [14:02:33:953]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (B8:9C) [14:02:33:954]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:9C) [14:02:33:954]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
MSI (s) (B8:9C) [14:02:33:954]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (B8:9C) [14:02:33:954]: Restoring environment variables
MSI (s) (B8:9C) [14:02:33:955]: Destroying RemoteAPI object.
MSI (s) (B8:B0) [14:02:33:955]: Custom Action Manager thread ending.
MSI (c) (44:50) [14:02:33:957]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (44:50) [14:02:33:959]: MainEngineThread is returning 1603
=== Verbose logging stopped: 2/23/2015 14:02:33 ===
MSXML6 problem

Portal 7.0 Installation Problem-MS SQL 2005 Collation Problem

Similar Messages

Maybe you are looking for