Portal 7: Creating a new portal site based on one of the samples

Hi guys,
I followed this article (
http://blogs.sun.com/jimfaut/entry/portal_7_creating_a_new ) to set up a new portal site like Enterprise sample
But when I log in the new site with new account , it always says "Login Unsucessful" .But If I use the accounts of old Enterprise Sample site such as : mary, chris, ed , the login is successful .
It seems the new site use the login page of the old site .
I don't know why . May you teach me to fix this strange bug ?
Best Regards,
Il2fsomuch
Edited by: milf on Mar 6, 2008 6:03 PM

I know this is an old post but I have added to Jim Fauts article how to do this, see below:
Seeing that alot of people are facing the same problem regarding new user being unable to authenticate against the new Portal, I did a bit of digging up and managed to get it to work. See the steps I followed below, but first follow Jim's example above then after follow the example below:
After configuring the roles and loading display profile change the following settings, so that the new user's you create can authenticate.
I did the following to get my new users to authenticate:
On Solaris I opened the following file: /var/opt/SUNWportal/portals/csonline/desktop/csonline/Login/display.template
I changed all occurrences of org=EnterpriseSample to my new organization o=fiction
I also changed the Organization display profile document, replaced every occurrence of o=EnterpriseSample with the name of my organization fiction, in this case I replaced all values that are o=EnterpriseSample,dc=test,dc=co,dc=za
With o=fiction,dc=test,dc=co,dc=za
After configuration you might get a module denied error Authentication Module Denied
Depending on which module you are using, in my case I am using LDAP so I also changed all occurrences of Membership to LDAP inside the display.template file.
After the above changes restart your web container container for the changes to take place and Bobs your uncle.
Thats it. Its alive !!!
Hope this helps

Similar Messages

Creating a new Portal Masthead iView..

Hi,
I would like to create a new Portal Masthead iView for my portal application which should contain the logoff and help option. From which iView, I can create it?
Thankyou,
Sudheesh...

Hi Sudheesh,
Masthead: contains branding elements, user identification, and the appropriate (based on the portal configuration) function links from among Help, Personalize, New Session, Log Off and Log On.
In the Portal Catalog, go to Portal Users --> Standard Portal Users --> Default Framework Page --> Masthead iView, and in the Help Link URL property, enter the URL of the site you want launched when the user clicks the Help link.
Also check on to this link,
http://help.sap.com/saphelp_erp2005/helpdata/en/97/d4ee3d6434445ae10000000a11405a/frameset.htm
Hope it helps,
Regards,
Nagarajan.

Where I can creat a new portal application?

hello:
 I want to Create a new Masthead Component:
a) Go to System Administration Support Support Desk Portal Runtime Browse deployment. Navigate to ROOT/WEB-INF/deployment/pcd and select file com.sap.portal.navigation.masthead.par.bak. Click the download link. Open the zip file and extract it to your local file system.
b) Open Eclipse and create a new portal application project based on the par file (File Import PAR file).
my problem is I don't know where I can creat a new portal application?Do I need download a software?
anyone can help me ?And give me the tool!
thanks in advance!

Hi,
 For NW2004s you can download from <a href="https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6">here</a>.
The steps for installation are:
1.Begin installation by executing JDTSetup.exe
2.Enter installation directory where u wish to install.
3.You will have to enter your Java SDK directory. NDS needs at least 1.4.2 version or later.
4.Enter folder name for workspace storage: C:\NWDS\Workspace or C:\SAP\JDT\Workspace
5.After installation is finished start Developer Studio by going to SAP Netweaver Deveoper Studio icon on your desktop.
6.Open EP Perspective by going to Window->Open Perspective->Other->Enterprise Portal
Hope this helps.
Regards,
Pooja.
Message was edited by:
 Pooja S

Creating a new portal in a new domain - no baseportal template

Using Weblogic Platform 7.0 on Solaris 8, I'm trying to work through the
procedure at http://edocs.bea.com/wlp/docs70/dev/newdom.htm "Creating a
new portal in a new domain."
Step 1 "Creating the new domain" goes fine. I can start the portal
server using WL/user_projects/domainname/startPortal.sh and connect to
its console at http://server:7501/console.
In Step 2 "Create the new portal", I start up ebcc.sh, open the project,
and run the Portal Wizard. I get as far as "Portal Templates". The
portal templates comes up empty; there is no baseportal icon, and I
can't go any further.
What's wrong?!?!
Larry Mulcahy [email protected] [email protected]
http://www.nyx.net/~lmulcahy/ http://www.frii.net/~lmulcahy/
PGP key at http://wwwkeys.pgp.net:11371/pks/lookup?op=get&search=0xE6F89645
"I like Linux, but I don't have any part of my body pierced." Roland Latour

Michael -
See this document. It should help you out.
http://edocs.bea.com/platform/docs81/confgwiz/startcw.html#1049231
Regards,
Kunal
"Michael Meyer" <[email protected]> wrote:
hi,
I am running BEA Weblogic Portal 8.1 on a linux machine without any grafical
user interface. On Windows I was using the 'Configuration Wizard' to
create
a new domain. Can someone please tell me, how I can create a new domain
without an grafical user interface? Are there any command line tools?
Michael

Webapp not found when creating a new portal

Hi all,
I've just started exploring Weblogic Portal 8.1, and am now attempting to set-up a basic portal from scratch. Here's what I did.
1) Created a Weblogic Portal Domain using the Configuration Wizard. The domain name is "mydomain". The server name is "myserver".
2) In Weblogic Workshop, created a new application called "testportal".
3) In "testportal" application, created a new portal web project called "portal".
4) created "myportal.portal" portal in the "portal" portal web project.
5) Tried to start the portal (URL: http://localhost:7001/portal/myportal.portal), but received this error message:
"Webapp portal not found in application testportal."
6) When I tried to hit http://localhost:7001/portal, I was able to hit index.jsp for the web application, so the portal web app is alright.
Any ideas what I'm missing here?
Thanks!

I'm not sure of what is going on but just wondering.. did you drag and drop portlets on to the portal?
I recommend you to try the below step-by-step tutorials.
Check this out. http://e-docs.bea.com/wlp/docs81/startdev/startdev.html
And try this. http://e-docs.bea.com/workshop/docs81/doc/en/portal/tutorials/tutFirstPortalIntro.html
Seenu.

If I create a new apple ID will I lose all the apps I have purchased with my original ID?

If I create a new apple ID will I lose all the apps I have purchased with my original ID?

I set up FaceTime and Messages on four different devices with only one Apple ID. I used the exact method that is described in the video that AnaMusic has provided to you in the link in her response above. That method worked fine for my family, but you can create new Apple ID's just to use for FaceTime and Messages if you like. Many users prefer doing that as opposed to adding new email addresses.
IMO - using unique email addresses (like in the video) makes sense, because we (my family) all have different email addresses anyway, and it was very simple to add each family members email address to both apps and remove my Apple ID email address as the contact address on each device.
BTW .... if you are using your Apple ID on both devices - your phone number should be the number that is showing in the settings - not you daughter's. Did you set up the Apps with your Apple ID?

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and

I'm trying to create a new ichat Acc because for some reason the old one is not working, so I go to Create an Apple ID and start creating a new apple ID, when I submit the Acc it tells me that my Email address is already verified for another Apple ID and thats the only email address I have... What can I do?

There is no way to consolidate iTunes accounts.
Setting up an iPhone has never required creation of a new Apple ID.
You've apparently purchased content with both Apple ID's. Sign into the device with the correct Apple ID and sync the content.

I have to create a new iTunes account as I cannot remember the security question answers to my current account, how do I move over my purchases from my current account to my new account?

I have to create a new iTunes account as I cannot remember the security question answers to my current account, how do I move over my purchases from my current account to my new account?

fayry wrote:
... how do I move over my purchases from my current account to my new account?
This is not possible...
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
Apple ID FAQs > http://support.apple.com/kb/HE37

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

When creating a new window in safari, using command T, the marker have not activated the search field. It means you have to click there every time. Changed after upgrading to Mavericks. Anyone knows how to change this?

Yes, you can do something like that. What you would do is create a button for each image and then hide them. When I do this type of thing I place all of the buttons on a template page and then hide the template.
You can then use JavaScript to copy the icon from any of the hidden buttons to the main button that you've set up to display the image. For example, suppose you set up 10 buttons named b1, b2, b3, ...b10. The code to copy the icon from one of them to the button used to display the image (b0) would be something like this:
// Get the icon from the b3 button
var oIcon = getField("b3").buttonGetIcon();
// Get reference to the b0 button
var f = getField("b0");
// Set the icon of the b0 button to the icon retrieved from the hidden button
f.buttonSetIcon(oIcon);
// Show the b0 button
f.display = display.visible;
This code would go in the Mouse Up event of the smaller button.

How to create a new wage type in IT0014 and assign the GL?

Dear Gurus
Please guide me about Creating of new wage Type in 14.
My client wants to add a new wage type says:-1HRR ( Honorarium) & assign the same to Training Expenses GL account and order number. How to do it. Please guide.
Regards
Vikas K Sharma

To copy a standard WT and assign a new name with the same attributes and characterstics:
IMG > Personnel Management> Personnel Administration> Payroll data> Recurring Payments and Deductions. Copy any standard Wage Type.
Check assignment of WT to a Symbolic Account :
(The WT will inherit the Symbolic account from the copeid standard WT)
Go through SM30 to Table V_T52EL_NOFM. Make neccessary changes to the Symbolic account, if needed.
To create a new Symbolic Account and assign it to the WT:
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Employee grouping and symbolic accounts --> Define symbolic accounts
To assign the WT to the new symbolic account (same as table V_T52EL_NOFM):
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the HR-System --> Wage Type Maintenance --> Define WT posting attributes
To assign a symbolic account to a G/L or Check the assignment of Sym Acc to G/L:
Payroll --> Payroll (country) --> Posting to Financial Accounting --> Activities in the AC-System -->Account Assignment --> Assign expense accounts.
Hope this helps.
Soujanya.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now.

I created a new administrator USER account. I deleted the original one but the process never ends. It's been 3 days now. And I can't close preferences window or turn off the computer.
It's stays in the "deleting" but I can't cancel it or close the window.
What can I do?

Here are two screen shots to show you what I am seeing. The first screen shot shows it allowing me to select (highlighted in blue) my admin user (which is what I am locced in as). The second screen shot shows it allowing me to select the "Guest" user (highlighted in blue). However when I click on the user "Orion" nothing happens. It will not change to highlight that user.

Can't create a new illustration. Problems occurred while saving the print file.

I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file. ID:-1
I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another.
I have rebooted with no avail.
System:
Adobe Creative Cloud CC
Mac Book Pro 2012
2.6 GHz Intel Core i7
8 GB 1600 MHz DDR3

Is a printer connected? Is it turned ON? Is the driver up to date?
Illustrator checks this every time and also writes information on the printer into the file.

I am unable to create a new email message when I connect to the internet through google

I am unable to create a 'new email message'when I connect to the bigpond.com webmail through the internet from my ipad2.

Try this. Settings>Safari>Block Pop-Ups>Off.
I have an Exchange account that behaved similarly to what you are describing. I finally realized that I had to allow pop ups in order to access my mail on the server.

My iPhoto would open with stating the files were damaged. I created a new library, thinking I could just retrieve the old one through the Pictures folder. Now I cannot find the old library.

I fear I may have deleted ALL my photos!!! When opening iPhoto it stated that the photos were damaged. By creating a new photo library, I now cannot find the old photos in the Pictures file. I think I really screwed up!!!

Download and run Find Any File to search for "Library6.iPhoto" on your hard drive. That's a file that is in every iPhoto library. And Find Any File can search inside packages as areas that Spotlight can not.
See if you find more than one of those files. If you do then you can find out where that other library is. If there's only one found click on the Desktop to get to the Finder and use the Go ➙ Go to folder... menu option. Enter in the window /Volumes.
When you created the new library did you get this window where you were to either accept the default name that iPhoto presented or rename the new library?
Click to view full size
OT

Why can't I buy any app ? Iv tried creating a new Appel account ect but it says the same thing everytime . Sorry your payment was declined . How can I sort this ? Please help

Why can't I buy any app ? Iv tried creating a new Appel account ect but it says the same thing everytime . Sorry your payment was declined . How can I sort this ? Please help

- Try another payment method.
- Contact iTunes
Apple - Support - iTunes - Contact Us
- Create a NEW account using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before.
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card

Portal 7: Creating a new portal site based on one of the samples

Similar Messages

Maybe you are looking for