Portal Access without configuring the Hosts file

Hello experts,
Is possible to access the SAP Portal By mentioning the IP address in the URL without configuring the Hosts file?
Please suggest me.
Thanks.

>
Stars wrote:
> Hello Baskaran,
>
> Thanks for your frequent response. I didnu2019t configure the DNS. If I configure DNS now then it will affects the SAP installation. Please suggest me.
>
> Thanks.
Hallo Stars,
I am not able to understand the relation between the configuring DNS and affecting SAP installation. If you do not want to do the host file change or DNS configuration, i wonder how could your url request with Ip adress and port knows the physical server to reach.
Anyways it is going beyond Webdynpro-ABAP forum to the Networking,systems area. I request Moderators to replace this to appropriate forum.

Similar Messages

Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?

Is there a way to access my iTunes Library, which is stored on a (PC) External Hard Drive, on a MacBook Air (through an Apricorn Universal Hard Drive Adapter), without transferring the music files off of the external hard drive?
In other words, because the MacBook Air only has 120 gbs of hard drive space & my old hard drive, from a Lenovo, has 500 gbs of hard drive space (and I have over 120 gbs of music), I’m looking to manage my iTunes music from the external hard drive permanently. Upon attempting to access the iTunes library held on the external hard drive the following message comes up: “The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file”. Is there a way to get around this?
Any advice would be greatly appreciated, thanks so much!

You will have to engage a split library which means you will have to start answering questions on this forum because you will need to learn a lot about how iTunes works in order not that have a big mess at the end of it all. It also won't be easy when the time comes to relocate it all to different drives.
You can go to advanced preferences and turn off organize media and copy to items to media folder when adding items to library. Next read about how to selectively consolidate items to the external drive.
Sept. 2010, Consolidate selected content - https://discussions.apple.com/thread/2589812 and April 2014, https://discussions.apple.com/message/25414357
"...selected the new tracks directly in iTunes, Control-clicked on the selection, and saw that now you can consolidate selected items." - http://hints.macworld.com/article.php?story=20090919000326840
Remember that when you start iTunes without the external drive turned on iTunes will present you with a bunch of broken links. If you have automatic downloads enabled with iCloud you may have to turn that off to prevent iTunes from repopulating your drive trying to deal with those "missing" tracks.
If you add tracks in bunches to iTunes and want them to go to different media folders you will need to either add them by holding down the option key while dragging if the desired media folder is not the one set in preferences, or by changing the media folder in preferences. Changing media folder preferences only applies to new files added, not old ones.
Okay, I am going to stop typing because you might just reply to me, "Oh, okay, forget it," and I don't need the exercise.
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management
What are all those iTunes files? - http://www.macworld.com/article/139974/2009/04/itunes_files.html
Where are my iTunes files located? - http://support.apple.com/kb/ht1391

What is the real ip address to the apple server? Someone changed the host file in windows/system32/drivers/ect, and now I can't do a restore on my iPhone 3gs.

What is the real ip address to the apple server? Someone changed the host file in windows/system32/drivers/ect, and now I can't do a restore on my iPhone 3gs

"You have to change your router's IP address to be able to access it. It will not give you the internet."
I'm not sure what that means Richard, but I did change the router's IP address from 192.168.1.1 to 192.168.5.1- isn't that what you meant in your first post. I know that isn't reflected in my screen capture that I took last night, but I did do that this morning after I read your post.
"Log on to your router and change two settings.
Change the setting in Setup from PPPoE to Automatic Configuration-DHCP and click on save.
Click on Advance Routing and change the setting from Gateway to Router then click on save."
I did this and still same results as far as I can tell. Can't get online through the router.
"Click on MAC address clone under setup tab ... click enable & click clone ...click save settings ... Check the IPaddress under WAN page ....
If getting IP in public range .... try going online ...."
I tried this- at least to the part about checking the IP address under WAN. I assume you mean the WAN page in the modem setup- nothing looked any different after trying what you suggested, and I'm not really sure where I would be "getting IP in public range" or what that means.
I'm about to give up and just buy a new router to see if I can get the same lack of results with a different one. My ISP maintains that everything is set up correctly on their end and really can't do anything more for me. The Modem works and is set up correctly and they can give tech support for a router.
Here's what my basic setup looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/BasicSetup.png
Here's what the advanced tab looks like now:
http://i490.photobucket.com/albums/rr270/SukarUDL/AdvancedRouting.png
Modem setup looks the same
Message Edited by Writersbloc on 09-25-2008 07:05 PM

About the hosts file (syntax/usage question)

Hi,
I am trying to block a handful of different websites that I do not want my daughter to use right now. I would like to use the hosts file to do this. Although I have basic familiarity with the hosts file and editing it, I am not completely certain as to how it works and how DNS works. If I want to, for example, block "yahoo.com" and all of its subdomains, would the following be an acceptable/valid entry?
127.0.0.1 *.yahoo.com
By not listing the subdomains of "yahoo.com", would that make it any liklier for those webpages to get through? If I were to also list out all of the "yahoo.com" subdomains that I have knowledge of along with the previous entry, would that cause any problems?
And the second part of my question is: Is the hosts file ever not top priority in lookup (on OS X 10.6.8, if it matters); and if so, is there a good way to make it always first?
Any help would be appreciated!
Thank you,
Michael

Use parental controls, maybe Dnsmasq, or a nanny-capable firewall-gateway-router box that's been configured on the edge of your network.
The /etc/hosts file also has specific sequence to get it reloaded; that file is read once and subsequenty cached. IIRC, you need to either /sudo dscacheutil -flushcache/ or /sudo killall -HUP mDNSResponder/ the DNS resolver.
If your child is technically inclined, or knows how to do basic internet research, or has discussions with the more nerd-ish among her peers, your child can learn how to bypass /etc/hosts and Dnsmasq using her own DNS translations, or with her own DNS services. That possibility would point toward either parental controls (easy), or the firewall-gateway-router box (added cost, but can block some or all systems on your local network).
Here's how easy it is to bypass the /etc/hosts block; launch Terminal.app and issue the equivalent of:
dig +short @8.8.8.8 host.example.com
for the host.example.com host that you're (she's) interested in. (There are other commands that can be used; more than just dig can be used here, and there are web sites that can perform this translation for you.) Then connect to the IP address that this command emits. Your /etc/hosts block will not prevent this, and will not block this.
If your daughter is somewhat more technically savvy, a VPN will bypass the /etc/hosts blocks. She'll need access to a VPN server, and those are available from various free and very low-cost sources...

Tomcat 5.5 context.xml, how to configure the Host element

[Probably this question should be asked elsewhere, if so please advise]
Dear all,
I understand that Tomcat 5.5 prefers that your web application comes with a context.xml file under the META-INF folder.
So I added a context.xml file under the META-INF folder of my web application,
please have a look below.
context.xml
<Context path="" docBase="C://Program Files//Apache Software Foundation//Tomcat 5.5//webapps//test">
 <Resource
 name="jdbc/testDB"
 factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
 auth="Container"
 type="javax.sql.DataSource"
 maxActive="10"
 maxIdle="5"
 maxWait="10000"
 removeAbandoned="true"
 removeAbandonedTimeout="60"
 logAbandoned="true"
 username="username"
 password="password"
 driverClassName="com.mysql.jdbc.Driver"
 url="jdbc:mysql://localhost:3306/test" />
</Context> Ok, that is good so far, but how do I configure the Host element.
I mean how do you link a specific Host to a specific Context?
Before, the Context element was a sub element of the Host element,
now it is completely separated.
Host in server.xml
<Host name="www.test.com" deployOnStartup="true" debug="0" appBase="webapps" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false">
 <Valve
 className="org.apache.catalina.valves.FastCommonAccessLogValve"
 prefix="test_access_log."
 suffix=".txt"
 pattern="common"
 directory="C://Program Files//Apache Software Foundation//Tomcat 5.5//webapps//test//logs"/>
</Host> I assume that if I modify the appBase of the Host element from webapps to webapps/test then it would work, but if I have several
Contexts for the specific Host, how should I configure it then?
Please help by giving examples!

OK, I have changed the Host's appbase to webapps/mytestapplication.
I want to deploy a test.war under the appbase:
webapps/mytestapplication/test.war
The name of the host is www.test.com
Because the war file is not named ROOT.war (instead it is named test.war),
the URL to the test application would be www.test.com/test.
Now I have several relative anchor links in the test application
Say for example the test application is deployed and accessed through www.test.com/test.
Clicking on the aboutus link would change to URL to www.test.com/aboutus.html.
Instead, for this to work, the URL must be www.test.com/test/aboutus.html.
Obviously, the easiest solution is to add /test before each anchor link:
But the there must a different solution.
Adding a path to Context element did not work:
<Context path="/test" ...>
</Context>
Question:
1. what is the solution for the anchor scenario above, should I add /test before each link?
2. Is my configuration (can be seen at the bottom) correct?
Basically, I have removed the path and docBase attributes from the Context element.
I have also set autoDeploy to false in the Host element.
Here are a few paragraphs from the docs:
autoDeploy attribute of Host element:
"Finally, note that if you are defining contexts explicitly,
you should probably turn off automatic application deployment.
Otherwise, your context will be deployed twice each, and that may cause problems for your app."
OK, so I set autoDeploy to false since I am defining contexts explicitly, (META-INF/context.xml)
docBase attribute of Context element:
The value of this field must not be set when the Context
is configured using a META-INF/context.xml file as it will be inferred by the automatic deployment process.
So, I remove the docBase attribute eventhough I am confused a bit.
This is the part that confuses me:
If autoDeploy is set to false since I am defining contexts explicitly,
how can then anything be inferred by the automatic
deployment process? (please answer!)
There should not be any automatic deployment process when autoDeploy is set to false.
path attribute of Context element:
The value of this field must not be set except when statically defining a Context in server.xml,
as it will be inferred from the filenames used for either the .xml context file or the docBase.
Same as the Context element.
Thanks!
<Context>
 <Resource
 name="jdbc/testDB"
 factory="org.apache.tomcat.dbcp.dbcp.BasicDataSourceFactory"
 auth="Container"
 type="javax.sql.DataSource"
 maxActive="10"
 maxIdle="5"
 maxWait="10000"
 removeAbandoned="true"
 removeAbandonedTimeout="60"
 logAbandoned="true"
 username="username"
 password="password"
 driverClassName="com.mysql.jdbc.Driver"
 url="jdbc:mysql://localhost:3306/test" />
</Context>
<Host name="www.test.com" deployOnStartup="true" debug="0" appBase="webapps/mytestapplication" unpackWARs="true" autoDeploy="false" xmlValidation="false" xmlNamespaceAware="false">
 <Valve
 className="org.apache.catalina.valves.FastCommonAccessLogValve"
 prefix="test_access_log."
 suffix=".txt"
 pattern="common"
 directory="C:/Program Files/Apache Software Foundation/Tomcat 5.5/webapps/mytestapplication/test/logs"/>
</Host>

Cannot get the hosts file to operate or change.

I have tried to every way I could find on the internet to change the hosts file on my Mac OS X 10.4.11 computer plus several newer macs that operate in my office. I was able to easily do it on the PC's but not on the Macs. I modified the /etc hosts file directly to no avail, modified it using the terminal commands and also tried using the NetInfo manager. I am NOT a tech guy, just a guy trying to get his computers to work properly. A tech company just changed our router to a Cisco ASA device which is why this change needs to be made, they did not know how to make the changes to the hosts files on a Mac. Everybody in the office loves our Macs so to not be able to get to our own website and webmail is frustrating. Here is what I changed the hosts file to:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1 localhost
192.168.16.2 auctionbid.stoutauctions.com
192.168.16.3 mail.stoutauctions.com
192.168.16.3 smtp.stoutauctions.com
192.168.16.4 stoutauctions.com
255.255.255.255 broadcasthost
::1 localhost
Is something else in the system I need to change to make this take effect? Is something set wrong? Any help would be greatly appreciated.
Also if anyone knows of a reputable company that will do remote work on Macs, please let me know. I have a few things that I don't know how to do and would not be worth a trip to the middle of nowhere for a tech company so if they can do it remotely that would be great.
Thanks!
Greg

Hmmm, the line after...
127.0.0.1 localhost
Should be...
255.255.255.255 broadcasthost
Not sure if that is it or not.
Did you see this article, especially for adding from a hosts.txt file?
http://support.apple.com/kb/TA27291?viewlocale=en_US
Did you flush the DNS Cache after changes?
How to Flush DNS in Mac OSX using Terminal...
In Mac OSX Leopard, you can use the command dnscacheutil -flushcache to flush the DNS resolver cache:
dnscacheutil -flushcache
In Mac OSX versions 10.5.1 and before, the command lookupd -flushcache performed the same task:
lookupd -flushcache

How to configure the property file

Is this the correct way of configuring the property file in web.xml.
<servlet>
<servlet-name>ControllerServlet</servlet-name>
<servlet-class>com.test.prod.pds.Controller</servlet-class>
<init-param>
<param-name>LOGINID</param-name>
<param-value>C:\bea\user_projects\domains\mydomain\applications\TestWebApp\WEB-INF\classes\loginid.properties</param-value>
<description>Pds Group properties file</description>
</init-param>
</servlet>
IT is giving an error "javax.servlet.ServletException: loginid.properties (The system cannot find the file specified)"

Hi,
Place that properties file in the application classpath Then it will work fine without any problems.
Go through the follwing links,In that you will get usefull information on this.
http://jtidy.sourceforge.net/multiproject/jtidyservlet/configuration.html
http://www.utdallas.edu/~baughman/velocity4.html
Regards
Anilkumar kari

Does anybody have any idea where the hosts file is?

Where is the host file, the one that I need to change so I can trick my browsers to look up a domain that's not online yet.

The Hosts file is located at /private/etc/hosts. You can use the following command in the Terminal to access and change it:
sudo pico /private/etc/hosts
This command will ask you for your administrator password, which will not produce anything on the screen while it is being typed. The Terminal is in the /Applications/Utilities/ folder.
(14492)

Switch: Allows all right of access without "configure terminal" ?

Hi,
I'm student in France, and for school project, I would like to know, how I can allow in privilege EXEC all the right of access, without "configure terminal" for one user telnet.
I look forward to your response.
Best Regards,
Student

The question is not so clear, If you are talking about the command authorization for users, please ref:
http://www.cisco.com/c/en/us/support/docs/security/secure-access-control-server-windows/99361-acs-shell-auth.html

How to AVDocGetPDDoc without opening the pdf file

Hi all,
how to AVDocGetPDDoc without opening the pdf file in acrobat plugin sdk.
Regards,
JK

thanks for ur reply, now its fine.

How to change the width for adf shuttle without modify the skin file

Dear Professionals
I haven an ADF Shuttle component in my jsp screen , How can i change the width for the two boxes without modify the skin files.(I know i can do that by skin but what i want to change one shuttle just in one screen not change all shuttles on other screens).
Regards
Wish79

Okay, I didnt try with the trinidad selectmanyshuttle, but this worked for me on the af:selectmanyshuttle..
 <af:selectManyShuttle label="Label 1" styleClass="mycustcss">
 <af:selectItem label="Label1" value="value1"/>
 <af:selectItem label="Label2" value="value2"/>
 </af:selectManyShuttle>
 <af:selectManyShuttle label="Label 1">
 <af:selectItem label="Label1" value="value1"/>
 <af:selectItem label="Label2" value="value2"/>
 </af:selectManyShuttle> And in my css file, I have
af|selectManyShuttle.mycustcss::content { width: 800.0px;}
The first selectManyShuttle came up very wide and the second one came up in the default width..
Julian.

Configuring the Receiver File/FTP Adapter !!

Hi
I am trying to configure the Receiver file adapter using the J2SE adapter engine(Please note , NOT the J2EE adapter engine).I see a prerequisite for configuring as below
"The address (HTTP port and URL) where the adapter can be contacted from the Integration Engine".
What values are to be specified and how can they be validated ?
I could see an example given in the Docs saying below,
If i specify , say for example,
"XI.httpPort=1234 and
XI.httpService=/file/Receiver, the end point address of the file/FTP adapter in the Integration Engine must be specified as follows:
http://<fileadapterhost>:1234/file/Receiver"
Can anyone explain what exactly is this endpoint address and where should it be specified/referred to ?
Thanks
Saravana

Hi,
"http://<fileadapterhost>:1234/file/Receiver"
this adress refers to an end point with the end point type "xi-connectivity" in the integration directory (ID)which refers to the settings in the file adapter (httpPort=1234 and XI.httpService=/file/Receiver)
1. you specify these adress in the file adapter (outbound)
2. you refer to these adress in the ID (Receiver System End points)
every file adapter should have an own port, because you can not specify two identical ports in two fileadapters.
hope I could help you,
michele
Message was edited by: Michele Mangieri
Message was edited by: Michele Mangieri

Without touching the JSP file

Hi,
I just want to set a text in my browser with bold face from my
begin....Display method. say Back>.
Since i decalare this as a text and using .setvalue() i'm getting it
as it is(i.e back in browser o/p.
Can u suggest me the solution ?
Todd, thanks for ur previous suggestion.
Thanks and Regards,
Vidyasankar.

I'm not sure, but I assume what you're indicating is that you're getting
back literally "Back" in the rendered browser text (meaning the HTML
source is "<B&rt;Back</B&rt;"). If so, it's because you need to set
the "escape" attribute to false for the text field:
<jato:text name="FooText" escape="false"/>
Todd
----- Original Message -----
From: "VidyaSankar" <dnvidyasankar@y...>
Sent: Friday, February 09, 2001 2:49
Subject: [iPlanet-JATO] Without touching the JSP file
Hi,
I just want to set a text in my browser with bold face from my
begin....Display method. say Back>.
Since i decalare this as a text and using .setvalue() i'm getting it
as it is(i.e back in browser o/p.
Can u suggest me the solution ?
Todd, thanks for ur previous suggestion.
Thanks and Regards,
Vidyasankar.
[email protected]

How do I edit the hosts file in Lion

I tried to edit the hosts file in Lion with: sudo nano /private/etc/hosts. Then entered Password. The window came up blank evev though I know there is data there.

Thanks BD for your response. I have looked at Youtube where they are demonstrating how to do this by using sudo nano /etc/hosts. After entering the Password it shows a screen with the text of the hosts file. On the bottom of the screen it shows the number of lines read. When I do the same thing I get a blank screen and on the bottom it says no file. I am either doing something wrong or this does not work. I even tried changing the permissions of the hosts file to R & W for system, wheel, and everyone. This also did not work. I have not tried Hostal yet but if I can't find a simple way to text edit the hosts file I will give it a try.

How do I edit the host file in ipad

I would like to test our site and would like to point the URL to a different server. Is there a way to edit the hosts file similar to how you would do it on other computers?

iPhoneView will let you get at your system files.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Portal Access without configuring the Hosts file

Similar Messages

Maybe you are looking for