Portal Activity Reports for multiple groups
Hi,
Can the report display the count of users belonging to multiple groups or would it have to be created seperately for each group. I have tried to use wild cards and commas and nothing worked, the field does not accept more than one valid group name to be entered. Any ideas how to work around this without having to create a different report for different groups?
Thanks
Hi EAmin,
You can only show information about users who belong to a specific group and not multiple groups. But if you want to show users in multiple groups, you can create a new group (say temp) and add the other groups to temp. Now, configure the report to display users in group temp.
Rajiv
Similar Messages
-
Activity Report for Collaboration Rooms
Hi,
Is there some kind of Activity Report only for Collaboration Rooms ? Like we have Portal Activity Report for entire portal.
Please give me your suggestion. Helpful answer are appriciated.
Regards
Prakash THi Prakash,
You can run the room usage analysis to check how often particular rooms have been used in a specific period. Please check out the following page on help.sap.com:
http://help.sap.com/saphelp_nw70/helpdata/EN/44/512abdba4b1193e10000000a155369/frameset.htm
You might also have a look at the Room Inventory List which is linked on the page mentioned above.
kind regards,
Ursula -
Portal activity reports "No content available for the specified period."
Hello experts,
I'm running NW04S PS18 (7.0.18.0.0), and I like to create a activity report iview. I've turned on the service in the service configuration and it's all running and enabled there. Then I created an iview from the portal activity report template. Type of report is page/iview activity and reporting period is most recent activity for 1 week. I add a couple of iviews. When I preview the iview I get the message 'No content available for the specified period'. When I add a role where the iviews are included the reports shows data. I try it with pages and worksets but the report is only working when I add roles. When I add roles, the hits will be shown add role level. When iview 'a' is added to 3 roles, the iview is displayed 3 times in the report and not 1 time. Why?
Is it not possible to add just iviews?
Greetings
JoeriHi,
First check the monitor properties of the page/iview is properly enabled or not.
then add the role(in which your iview/page is present) to the portla activity report iview.
Delete all other pages/iviews/worksets/role except your iview/page. this can be done easily.
now save and check the report iview.
Raghu -
Portal Activity Report -- Simplification?
Hi all,
I've been working with the Portal Activity Report iView for a couple of weeks now trying to develop some metrics for our company to measure the portal usage by. I didn't have any problems with the user reports, but I had <b>a lot of issues with the iview/page reports</b>. Although I sucessfully found and charted the <b>daily data</b>, it took a painstakingly long time because of several factors:
- There was so much data that I had to shift through for about 1.5 months, upwards of 11000 rows.
- I did not need most of the data as this is the first report being generated for the company, they just want more general metrics rather than detailed metrics. However, the company may still want reports on the other data later on, so we can't just disable the collection of data on most of our iViews.
- The format of the date column in the iView/Page report did not sort well in Excel. Instead, I had to convert the dates to the more traditional mm/dd/yyyy format so that they sorted properly. This didn't take too long, but it was still an issue.
- Unfortunately, when the portal was deployed, and still now, we do not have naming conventions for our iViews. This resulted in there being many object names (column heading) that were the same even though they were different iViews and pages (for example, an "About" iView exists on many pages). The only way to differentiate them was based on the PCD location, which is very long and not the best way to have to look at and sort through data.
- Lastly, we only collected data for iViews/Pages that got at least 2 hits. This was fine for iViews/Pages that usually got 10 or more hits per day. However, for iViews that didn't get 2 on any given day, no data was reported. This is what we intended, obviously. But it became a problem when I went to go graph the data because I was using line charts with multiple lines (series) on them (for example, I grouped all the different search iViews onto one line chart to compare which search pages are getting used the most). Here is an example graph that I had to create dates and 0's for because the bottom two series had days were missing some days because they got less than 2 hits: <a href="http://img509.imageshack.us/img509/7365/examplegraphvd8.jpg">Example Graph</a>. Some of the series wouldn't have the same number of points because there were some days that were missing because they got less than 2 hits. This meant I had to go back and manually add in rows of missing dates along with 0 hits to make the graph correct.
So, now that I've detailed the problems and issues, here is my real problem going forward. The executives would like monthly reports on the portal. Ideally, this process would be as automatic as possible. I was hoping people could <b>suggest best practices</b> for gathering and sorting through the data so that it doesn't take anywhere near as much time to group and identify key iViews and pages. Is there <b>any way to selectively download data</b> about iViews/Pages without turning off the data collection on other iViews/Page? Also, is there any way to automate the downloading of the iView/Page and User reports from the portal given a time interval such as every 30 days? Has anyone else run into similar problems in their own positions and, if so, can you make suggestions about how you have improved the reporting and charting process? Any help is greatly appreciated.
Thank you.
Message was edited by:
Chad Sowald
Message was edited by:
Chad SowaldHi Ariel,
Check the database table WCR_WEBCONTENTSTAT, and see if any data is being generated. This will determine if the problem is data generation or the reporting of the data.
If there is no data, the only possibility is that the Montiro Hits is false, but this is not the default and is unlikely.
If there is data, check the aggregationlevel field and the timestamp of the data, and create a report for this period and aggregation level. For example, if the aggregation level is "q" generate a quarterly report for the time period.
Hope this helps.
Daniel -
Hello All,
The Portal Activity Report shows data under Authenticated and Anonymous Columns
Questions:
1. Portal is not configured for anonymous authentication. So from where does it collect data and show data under anonymous column?
2. How can I disable the anonymous part? And done so, will this have any affect on the way the Authenticated figures are collected?
Please share your experience on this.
Awaiting Reply.
Thanks,
PRanjanEven if you don't think you have any anonymous access, there is a default user Guest who is part of the Anonymous Users group who seems to access the portal!
Not sure how to hide it. Sorry... -
How to list the documents in the Portal Activity Report?
Hello,
In the Portal Activity Report I would like to see the documents list with number of uploads, number of downloads and the username who have accessed the documents for monthly. Can any one help me where to mention all the details regarding this one. I didn't found anything regarding this in the Portal Activity Report.
Thnx in advance.
cheers,
MuraliHello,
Can anyone help me solving this problem.
Thnx in advance
cheers
Murali -
How to execute the Portal Activity Report
Hello,
In the System Administration -> System Configuration-> Service Configuration Editor
Under Applications->com.sap.portal.activityreport.core-> Services->ActivityReport and I have configured the report.
I saved I have restarted the service to effect the changes and in Portal Catalog
Application->com.sap.portal.activityreport.core and I have administrated the changes. The Application Details Editor is displayed.
I have clicked the Restart the portal also.
I would like to know how to execute this Portal Activity Report after making this configuration.
Can anyone help me.
Thnx in advance
cheers
KrisHi Kris,
here an example with steps:
1. Navigate to Content Administration -> Portal Content
2. Step into a test folder and right click on the folder to create a new iView
2. Select the template "Portal Activity Report iView"
Name: Daily User Logins
Technical Name: DailyUserLogins
3. Open the newly created iView and define the following parameters
under "Specify report content"
Start of Reporting: Date 01.01.2005 and Time: 08:00
End of Reporting: Date 31.12.2005 and Time: 24:00
Time Unit for Reporting: Daily
under "Configure report options"
Information to Report: Number of users logged on
You have created a new reporting iView, aggregating information about the number of anonymous and authenticated users on a daily basis.
Hope this helps,
Robert -
Can the Portal Activity Report show unique users per page?
Hello all
I guess this is a rather simple question, but can someone tell me if the portal activity report can show a count of unique users per page per week for instance?
Or will it just show which users have visited the page in a list without aggregating them to a number? And if the users are aggregated to a number, is it only uniwue users that are counted for the given period?
Regards,
MartinHi sogaard,
It shows the no of unique logons.isnt it.
Try these blogs
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5497
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/5436
Hope this helps
Regards
Vineeth -
Portal Activity Report with Selection criteria
Hi All,
I have created an iview using 'Portal Activity Report' template, added the iview to page and page is added to the role which is created for this report. Also, users were assigned to the new role. When users go to portal and see this report, they are seeing the final output of this report along with the 'Download Report' option.
My requirement is to give selection screen option (Type of report and Reporting period) to users. So that users will change the selection criteria and run the report as per their need. Please advice me on how to do this.
Thanks in advance.
Swapna.swapna,
you can do this by creating a webdynpro application for accessing the database tables, the list of data base tables is in this [help |http://help.sap.com/saphelp_nw04/helpdata/en/48/6aa9429b930b31e10000000a1550b0/frameset.htm]document and use web dynpro application to connect to that tables. Check this thread for[ dynpro and database tables |dynpro and database tables;
regards
Mahesh -
Portal Activity Report is not getting updated properly
Hi,
I have created a test portal activity report with the Reporting type set as Page/iView activity. I have added five iViews in this including a yahoo search URL iView. The reporting period interval is set to Fixed Period with the date range that spans for around 10 days.
The issue is, even after hitting these iViews several times, I don't see the portal activity report getting updated. Only for the yahoo search, I can see no. of Users as 1 and no. of Hits as 4 as a previous day report (today being friday, I could see thursday's yahoo iView report).
Here are the pre-liminary settings that I've done:
1. All the iViews have the 'Monitor Hits' as 'true'.
2. The Activate Data Collection is set to 'true' in the 'DataCollectionHook' that is available under com.sap.portal.activitydatacollector Service
3. The properties viz., Activate Portal Activity Report, Gather iView statistics, Page statistics..etc are all set to 'true' in the ActivityReport Service
4. I could see that the last aggregation time (in GMT) keeps changing every one hour without any problem.
Any help would be appreciated.
Thanks in advance!
Regards,
Yuvaraj SGHi Raghu,
I tried as per your suggestion. At first, I thought that it's working. But, the report came out only for one day (thursday's report) and there weren't any more reports after that. So, I don't think this approach is working in my case! Moreover, for me the requirement is that the iViews have to be in some other portal roles and the Activity Report iView will be in a different portal role.
So, I am currently checking the SAP Note 1084379 as Sandeep has quoted.
Thanks for your help!
Regards,
Yuvaraj SG
Edited by: yuvaraj s g on Jul 13, 2009 8:09 PM -
How to view the Users in the Portal Activity Report
Hello,
Can anyone tell me how to view the Report of users who have logged in a specific time. For Example I would like to view the users who have logged in between 9.00 am and 9.15 am. Is it possible to view mentioning the country name?
Please explain me in detail how to view the Report.
Thnx in Advance
cheers,
Muralihi,
You can certainly do it for hourly basis but i am not sure whether it could be done quarter an hour basis. Also The portal nodes within a cluster can be in different time zones, yet the activity data from all nodes are aggregated together and reported together. To enable the reporting of hourly data from different time zones, portal activity reports display hourly data based on the GMT time zone.
Do see the documentation
http://help.sap.com/saphelp_nw04/helpdata/en/fb/144120ea5b4e9c9385d493a578d6c9/frameset.htm
Weblog :Portal SP9: Portal Activity Report
Regards,
Ganesh N -
How to display an USERID on "Portal Activity Report - Pages and iViews"
HI,All.
I have a question.
It is as follows.
A purpose:
iView of EP is used and called for contents of the WEB-AP server of various (Tomcat(Java)).
The acquisition of "EP login user ID" is difficult from the log of each WEB-AP server.
It wants to acquire information on "Which iView which EP login user how many times executed?" by using EP, and analysis/to use it.
A present specification:
"Only information on "Number of users using iView" can be acquired in this function
though "Page and iView of portal activity report" of EP was verified to achieve the above-mentioned purpose.
It is impossible to analyze it, that is, "Which user ID used iView?".
A question:
In "Page and iView of portal activity report"
How should I do to display "Which iView how many times did each EP login user execute?"?
Or, I want to know if there is a table with the informations.
Environment:
EP6.0 SP18
OS:WindowsServer2003 EE sp1 rc2
CPU:Xeon3.2GHz x2
MEMORY:4GB
HDD:36GB*2
Other:Clustering
Thanking you in advance.
matsu.Hi,
You can try Setting the 'Monitor Users' property of the pages to 'Yes'. We did this for one of our portal but there seem to be a slight performance trade-off.
Please award point if helpful. -
Portal Activity Report - WCR_USERPAGEUSAGE is empty
Hi all,
I want to create custom Portal Activity Reports.
I followed this link:
http://help.sap.com/saphelp_nw04/helpdata/en/48/6aa9429b930b31e10000000a1550b0/content.htm
The table WCR_USERPAGEUSAGE has no data.
The 'Data Collection Service' is started.
Portal version is: 7.00.17
'Monitor Hits' is set to 'true' on all iviews.
'Monitor Users' is set to 'true' on some pages.
p.s
'Activity Data Collector' is also started but as for as I know this
service creates activity files in the file system that has nothing to dowith the WCR tables.
How do I solve it?
Regards,
OmriSolved by SAP support after implementing note 1084379 (the latest version of the Portal Activity Report tool).
Omri -
Portal Activity Reporting and SAP Business Warehouse
Hi,
Does anyone out there know if SAP has or plans in the near future to deliver Portal Activity Reporting content via SAP Business Warehouse?
I would have thought BW would have been the ideal solution to enable some "out of the box" Portal Content in terms of extracting the data from the tables used for the Portal Activity reports, and then extracting them to BW for slicing/dicing & Presentation.
The current standard Portal Activity reporting does not supply what we need. We don't want to spend time and money developing this ourselves if SAP has plans to deliver it in the near future.
Any news please?
Cheers, Phil G.Hi,
Check this blog which tells about the future of Activity Reporting..
The Final Word (Hopefully) on the Portal Activity Report
John -
Reg:- Runtime Exception on preview of Portal Activity Report Editor iView
Hi All,
I am trying to preview the iView, "Portal Activity Report Editor" located under Portal Content -> Content Provided by SAP -> Admin Interfaces -> Admin iView Templates -> Portal Editors under Content Administration role.
But, when I previee the iView, I get a RunTime Exception as follows:
#1.5 #0014C263546200A5000008B900000CEC000450DE5CE9A528#1214815878685#com.sap.portal.applicationFramework.tools.wizardframework#sap.com/irj#com.sap.portal.applicationFramework.tools.wizardframework#<User_ID>#152806##n/a##b3602110468111dd9e8e0014c2635462#SAPEngine_Application_Thread[impl:3]_56##0#0#Fatal#1#/System/Server#Java###wizard session No: 429: could not instantiate pane instance of type com.sapportals.admin.wizardframework.core.ClassNameAndConstructorArgs@1663bd## #1.5 #0014C263546200A5000008BA00000CEC000450DE5CE9A6F1#1214815878685#System.err#sap.com/irj#System.err#<User_ID>#152806##n/a##b3602110468111dd9e8e0014c2635462#SAPEngine_Application_Thread[impl:3]_56##0#0#Error##Plain###Jun 30, 2008 4:51:18 AM com.sap.portal.portal [SAPEngine_Application_Thread[impl:3]_56] Error: Exception ID:04:51_30/06/08_15351_4495550
#1.5 #0014C263546200A5000008BC00000CEC000450DE5CE9B605#1214815878685#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#<User_ID>#152806##n/a##b3602110468111dd9e8e0014c2635462#SAPEngine_Application_Thread[impl:3]_56##0#0#Error#1#/System/Server#Java###Exception ID:04:51_30/06/08_15351_4495550
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in service call of Portal Component
Component : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.activityReportEditor
Component class : com.sap.portal.webreport.editor.ActivityReportEditor
User : <User_ID>
at com.sapportals.portal.prt.core.PortalRequestManager.handlePortalComponentException(PortalRequestManager.java:973)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:343)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:547)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by: java.lang.RuntimeException: an Exception occured when instantating class com.sap.portal.admin.editor.pane.EditorPaneWrapper
at com.sapportals.admin.wizardframework.core.TrivialPaneFactory.getComponent(TrivialPaneFactory.java:54)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:225)
at com.sap.portal.admin.editor.Editor.doWizard(Editor.java:605)
at com.sap.portal.admin.editor.Editor.run(Editor.java:150)
at com.sap.portal.admin.editor.AbstractEditorComponent.doContent(AbstractEditorComponent.java:59)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
... 29 more
This happens for all Editor iViews.
Kindly let me know what could be the problem.
Thanks and Regards,
PavithraHi Sandeep,
Thank you for your inputs.
I had raised an OSS Message with SAP some days ago on this issue. SAP has replied back saying that only users with Content Administration role can have access to configure portal acyivity report. All other users can only view the results.
Regards,
Pavithra
Maybe you are looking for
-
Adobe photoshop starter edition 3.2 help
I have this program on my computer. I tried to register, but apparantly I can't because I miss the two months window. Need help to get my pictures out. Called the company direct and they said they can't help me. I was directed here for help. Please a
-
I have just purchased x plane 8 and am struggling to use it using only keyboard functions. Can anyone provide a few tips on how to operate this simulator properly without a joystick? Mac OS X (10.4.4)
-
ITunes 2 double-clicks to play a song...
Since I've downloaded recent version of iTunes (10), I have to double click a song twice before it will play. One double click will only select the song, it won't start playing. It's very annoying, is this just a change to iTunes that I'm stuck with
-
Building a box from the begining
I need to build a box (room in house) and attach components like wall hangings. need to rotate the room. change the positions of hangings. need to navigate inside the room and view it in different angles is it possible to use box object and achive th
-
Hi, We have added some custom fields in CRM for BP . All the extensions are activated. We have a custom field (Basicalll a check box) in the BP. The table BUT000 is populated with the custom field for this. There is a also a structure ZBSTC0000000000