Portal and IC Web client Transaction Launcher conflict

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

Similar Messages

Portal and IC Webclient Transaction Launcher conflict

We have integrated IC Web Client within Enterprise Portal by creating iview that launches IC Web client in a new browser window
Additionally, within IC Web client we have configured the Navigation Bar using the transaction launcher launch to various Non BSP URLs (e.g. www.ups.com) in a new browser window (stateful checkbox).
The problem weu2019re experiencing is if an agent launches a new browser window by selecting a URL from the Navigation Bar and then closes this browser window manually they are getting a prompt to save their work. This behavior only occurs when we start IC Webclient from the portal. When we use IC Webclient outside of portal the problem does not occur.
How to remove that SAVE popup?
Any help would be greatly appreciated.
Thanks
Muthappan

Hi,
When using the Transaction Launcher Wizard you have to enter at Transaction Parameters
parameter = ICWEBCLIENTBORKEYPARAMETER
Value = //currentCustomer/BP_NUMBER
We use a BOR transaction to open the tc. BP (BOR object type BUS1006, method EDIT) so the confirmed BP will be opened in edit mode.
CRM 4.0
Regards,
Mihai

PCUI and CIC web client differece?or same?

crm sale module in pcui and sales module in cic web client are same or different..technical and configuration differences
can anyone help me out in this..
thank you,
hun

Hi raj,
thank you for the information.
is there any relation between pcui and other web based applications like internet sales(b2b,b2c e-sales,e-service,e-marketing,,icss) and cic(for call center users) and sap portal(channel partners/b2b-one of the application).
is there any difference between launching crm_ic directly than from launching it from crm_ic. do i do the setting for cic webclient settings in spro or se80. i think bsp applications for cic webclient are done from se80 and the configuration for cic webclient.please tell me if it is not right.
where we will generate the url for this cic webclient and internet sales so that the users can use that url and login from anywehre in the world through internet browser.
thank you,
hun

Use Enterprise portal theme for Web Client

Hi Experts,
I am new to this topic.
I am working in portal project. We have situation that in portal we have excellent theme but in CRM Web client we donu2019t have fantasy theme like portal.
Is there anyway can I use my portal theme for CRM web client?
If you guide me how to integrate portal theme into CRM Web UIs, that will be great.
Thanks.

Ashok,
There is no easy way to extend your portal theme to the CRM WebClient. Lot of effort is needed for identifying the portal CSS files and updating CRm WebClient theme CSS files with the portal theme attribute values.
Thanks,
Thirumala.

Spring Tools Suite and vSphere Web Client plugins

Hi, I am new to this environment. I am developing VMware vSphere Web Client plugins. In the setup for vSphere Web Client plugins, it is indicated that the preferred tools include Spring Tools Suite, which is a derivative of Eclipse. It is an optional component to use the FlashBuilder tool. Optionally, the VMware documentation indicates that you can use Eclipse instead of the Spring Tools Suite, but different setup is needed.
I am posting here (instead of VMware/STS) for the following reasons. I am able to set up the environment without the FlashBuilder tool. I am able to develop Web Client plugins without the FlashBuilder tool. However, I believe the FlashBuilder tool will make development easier. When I try to get the FlashBuilder to load, I no longer can get things to work; I cannot develop Web Client plugins. Lastly, the FlashBuilder tool is the only piece of the puzzle that is a licensed product, and therefore, I will not be able to purchase the product if I cannot get the trial version to work.
FlashBuilder has a plugin installer for Eclipse. I have tried to install the plugin to Spring Tools Suite, and I have tried to install the plugin to a regular version of Eclipse. In either case, the problem I run into is that I cannot locate the VMware files, and doesn't have the virgo service which is present when I did not have the FlashBuilder plugin installed.
Does anyone have any experience or familiarity in getting FlashBuilder to work in this type of setup? Clearly it is doable, but using all of the documentation that I can find online, I cannot get FlashBuilder to work in my environment.
Thank you for any help or suggestions you might have.

Oh sorry, I thought that I had. I had gone to "contact adobe" and clicked on "customer service". It then told me to "select a product", to which I chose "Flash Builder". I then had to tell it that the question was in regard to "downloading, installing, setup" (of said Flash Builder). From there it told me I can ask the community or call a representative... when I clicked "community" I thought the initial "Flash Builder" setting that I chose would apply to where the question got posted, but it seems it did not.

Performance Monitoring and the Web Client

I am a project manager managing a large infrastructure upgrade with a migration of existing VMs.
I want to understand how my current VM are performing and the tool I have is the vSphere Web Client 5.1.
I want to get more trending data on disk I/O and Network use.....I cannot get this data with this tool.
I do not have access to the host to run the command line tools. What can I do? I also do not want to buy VCOPs either.

Hello dfery123,
Have you tried Monitoring Inventory Objects with Performance Charts (vSphere 5.5 Documentation Center - Monitoring Inventory Objects with Performance Charts)?
Regards,
Todor

IIS and IC Web Client

Hi,
I'm having a problem with my IC Web Client. After I install IIS (because I need to install TREX), I launch IC Web Client, it shows Page cannot be displayed. I uninstall IIS, my IC Web Client works fine. Anything that I've left out?
Appreciate any help.
Hapizorr Rozi Alias

Problem solved.

Oracle Portal and EJB Web application

Hi,
Can anyone tell me how to make portlets in Oracle Portal from the jsp files which are a part of EJB application ?
Problem here is OC4J is accessed behind Apache so the provider testing url(eg http://localhost/servlet/xxxx) gives page not found error.So portlets cannot be made.
Hope somebody has some solution on this.
Regards,
Mandar.

Hi Christopher,
I am trying to do the same as you have said,I am trying to access the EJB from JSP's that run on JServ.However I am getting this error when I try to use RMI
com.evermind.server.rmi.OrionRemoteException: Invocation error: java.lang.ClassNotFoundException: com.crm.Dao.Customer.CustomerDataHome; nested exception is: java.lang.ClassNotFoundException: com.crm.Dao.Customer.CustomerDataHome
But the same code runs fine if run the jsp from Orion server.
My code in jsp -
Properties env = new Properties();
env.put("java.naming.provider.url","ormi://localhost/autoglobal");
env.put("java.naming.factory.initial","com.evermind.server.rmi.RMIInitialContextFactory");
// env.put("java.naming.factory.initial","com.evermind.server.ApplicationClientInitialContextFactory");
env.put(Context.SECURITY_PRINCIPAL,"admin");
env.put(Context.SECURITY_CREDENTIALS,"j2ee");
InitialContext ictx_t = new InitialContext(env);
CustHom = (CustomerDataHome)ictx_t .lookup("CustomerData");
CustRem =CustHom.create();
The above error is when I am using com.evermind.server.rmi.RMIInitialContextFactory .
If I use com.evermind.server.ApplicationClientInitialContextFactory I get the following error
javax.naming.NamingException: Error reading application-client descriptor: No location specified and no suitable instance of the type 'com.crm.Dao.Customer.CustomerData' found for the ejb-ref CustomerData
Hope to get some solution on this.
Regards,
Mandar

FPN (Federated Portal) and WPC (Web Page Composer)

Hi all,
We implemented various web sites based on WPC (Web Page Composer) and now we need to federate this instance with other consumer nodes.
I read on SAP 880842 note that it's not possible to federate WPC.
Is there any options to federate sites developed in WPC?
What can I do in this scenario?
Thanks!

Thanks again Marcus.
But we can't use this option because we'll loose the WPC structure... It will need to be rebuild all site navigations...
We are working now with WPC content mirror (copying content from one server to another).
But we still need some help. We need to automatic copy KM content. Can you help us in this case too?
I opened a thread at this link:
/thread/1092248 [original link is broken]
Edited by: Ricardo Guedes on Oct 20, 2008 3:29 PM

Assign User Profiles and Web Interface Transactions to Users

Hi EM Gurus,
Has anyone worked with not standard scenarios in SCEM?
They are working well but I can't access them on interface web.
In selection page (search page after logon), where choose tracking scenarios, only standard scenarios appear although I have assigned both scenarios to the user and made same configuration; Assigned and Defined Web Interface Transactions, Configured Fields for User Profiles, Defined User Profiles, Assigned User Profiles and Web Interface Transactions to Users.
But only Standard Scenarios appear as choice of tracking scenarios that are displayed to the user as a dropdown box on the selection screen after logging on to the Web interface.
Has anyone accessed not standard scenarios on interface web??
Help, please!
Thanks a lot.
Rodrigo Freitas

Hello Rodrigo,
if you have assigned the scenarios to your user in transaction /SAPTRX/UCUSER you must go to the admin page and reload the profile manager.
/admin in the URL of the WCL instead /ehsearch.
Afterwards you should see them also in the drop-down box.
Best regards,
Steffen

Unable to access ECC transactions from CRM using Transaction Launcher

Hi Folks, we are trying to create a booking request using VA11 from portal. For this we have configured transaction launcher in CRM which will connect to ECC system from portal and VA11 screen will be launched. For this we have done the necessary configuration in transaction launcher (Including RFC destination and logical system) and this is working fine in Dev system but not in quality system. We are able to see SAP screen with toolbar Menu and System but not the entire transaction (refer image below). Our questions here are,
1)     What user type has to be configured when connecting from CRM to ECC? (System, Communication data or any ohter)
2)     If this has to work with user as Dialog, is there any supporting document from SAP saying this should be Dialog user?
3)     Is there any other issue and need development specifically related BOR TSTC?
Warm regards and thanks in advance for your time.
Prasad

Hello JC,
Yes, it is possible . You have to create new work center link or Direct Link for the existing transaction launcher.
Transaction Launcher
Regards,
Ashik

CRM url transaction launcher

Hi Experts,
I'm using CRM web UI.I defined URL and configured in the transaction launcher.Now I'm able to see the newly created transaction launcher in web UI.When I'm clicking on this, new window is opening as a popup window(without having
menu bar-->File,EDIT,VIEW,FAVORITES...etc). Now the requirement is to open in full browser(it should have menubar, titelbar..etc).Please provide me your valuable inputs on this.
Thanks & Regards,
S.Gangireddy.

Hi,
SAP has taken into account this point in the new versions (for me SAP 702 EHP1), with a new attribute in the customizing of the transaction launcher called "Keep Work area" :
Keep Work Area When Opening Launch Transaction in New Window
This indicator defines whether the work area content is kept when you open a launch transaction in a new window.
Use
If this indicator is not set and a launch transaction opens in a new window, then the main window loads the base page of the transaction launcher into the work area.
If this indicator is set and a launch transaction opens in a new window, then the main window keeps its current content in the work area.
Dependencies
This indicator is only evaluated if you have also set the indicator for using a new window.
Regards,
Imed.

Following the upgrade to 34.0.5, I can no longer access web pages of our SAN, airco, vSphere Web Clients, etc. How can I correct this?

Following upgrade to 34.05, can no longer access web pages of the SAN management interface, the airco system, the vSphere Web Client, etc. All still work in Chrome.
The airco system gives an error:
Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
Advanced info: ssl_error_no_cypher_overlap
The SAN management interface and vSphere Web Clients display an empty page. Not sure whether these also have problems due to SSLv3.
I understand you wanting to be cautious, but I seriously doubt I need to face an attack from our SAN. Please, at least give us an option to connect regardless.

hello, ssl 3.0 is disabled in firefox versions 34 & upwards by default - if you want to re-enable it you can do that like this which will make you vulnerable to the recently published poodle attack though:
enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''security.tls.version.min'''. double-click it, change its value to '''0''' and restart the browser.
https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/

Problem in Transaction Launcher

Hi friends,
I have used the cookbook example on page 30.
And it is working fine for the transaction VA01 but when i replace it with any other transaction like SE38 or BP its does not work and after calling the Transaction launcher it shows an error in the status bar of IE5.0 that
Line 47, char 5, Error : invalid Object ,Code 0, and the complete url of ITS.
Plz help me to solve this problem
Regards
Pulkit Agrawal

Hi,
You're talking about transaction code VA01 (to create sales documents), but you want to display a customer... so in fact you use tcode XD03 right? And if you're sure that this customer number exists in your backend, you could try to debug and add leading zeros to LV_PARTNER. Maybe that will help.
Regards,
Nicolas.

Transaction Launcher in ICWC with Handler Class

Hi All,
I am in the process of creating new Transaction through Transaction Launcher (Wizard) in IC WebClient.
I wish to know more about the creation of Transaction Launcher Handler class (With super class) and SICF - Services.
Please help me to create a new CRM/ISU Transaction through IC WebClient.
Thanks and Regards
Nalinakumar
[email protected]

Hello Nalinakumar,
You need to define Transaction Launcher Logical systems and URL's in
IC->ICWebclient>Administration->System Parameters->Define Transaction Launcher Logical systems and URL.
You need to configure activities
CRM->IC Webclient->BasicFunctions-->Transaction Launcher->Define URL's and Parameters.
Configure Transaction Launcher.
regards,
Muralidhar Prasad Chatna

Portal and IC Web client Transaction Launcher conflict

Similar Messages

Maybe you are looking for