Portal asking for Login details again while executing the reports

Hi Team,
Our Portal is asking for Login details again while executing the reports individually.
The issue is the if i enter the same PORTAL Login credentials, its showing as Authentication failed.
PLEASE ADVICE ASAP.
thanks & regards
Sneha

Hi Kiran,
I have recently taken up this portal.. so not clear on the structure.
however, I observed there was no user mapping available.. so i added the same with my login credentials..
stil the issue persists.
Please advice.
Sneha

Similar Messages

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

Asking for login details jumping from BW to SS report at Portal site

Hi Guys
Our BW reports are avilable from protal for user's.
Now the issue we are facing is when we jump from BW report to source system(SRM) report, it is aksing for login details for source system. where as at portal site it should not ask for login deatils. And we are facing this issue only in QA system and not PRD system.
M not sure where things are going wrong. I have checked SSO. nothing seems to be wrong here also.
Thanks & Regards,
Rohini

Hi Rohini,
I may not be correct. But does the user id which you are using (both in QA & Prod) have same settings for User-Type (SU01 -> Logon Data -> User Type). ?
Also u can check the RFC Settings (SM59).
Hope it would help..
Regards,
Vikrant.

Getting different result while executing the report by debugger

Hi All,
I am facing a peculiar issue. When i execute the report from SE38 i am getting a particular set of values in a alv report.
But if i start debugging the report by using /h and execute . i am getting another set of result. How does it happen any idea.
Without debugger result is
a
b
c
With debugger i am getting result as
a
d
e
f
What may be the reason . Kindly help.
Thanks in advance.
S.Velsankar

Hi,
you mean you have'nt change anything while debugging and results are different when ALV is displayed?
I don't really understand your issue... Could you give more details?
Kr,
m.

TSV_TNEW_PAGE_ALLOC_FAILED error while executing the report

Hi all,
. We are having an info cubeXFIAP_C12 (FIAP: Vendor Line Item Open).In which we have defined 10 Dimensions and 6 Line Item Dimensions. We have created a report on this with Key date as Input Variable Which gives me From Start to Till Date data. Also have an Variable on company code.
Then No of Records in my Cube is 45, 70,624.Compressed the Info Cube data .But No aggregates on it.
Now when I provide the key date as 30.06.2011 and Company code =XYZ.
I am unable to Execute the Report, It gives me a short Dump. Saying NO ROLL MEMORY.
Variables:
1. Key Date: Is a Customer Exit variable .If user Enters Data as 30.06.2011 ,It fetches data from u201C00000000u201D to u201C30.06.2011u201D.
2.Company code: Is a Manual Entry /Default variable.
I also have shot dump.Please find the error analysis of dump below:
The internal table "\FUNCTION-POOL=RRK0\FORM=MEGA_SORT_M\DATA=C_TSX_SORTK[2]-GT
ABIX[1]-GTABIX" could not be further extended. To enable
error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 4
Number of rows: 1503307
Allocated rows: 1503307
Newly requested rows: 2048 (in 1 blocks)
can any one help me .......
Regards
Laxman

Hi,
Just check following things
1http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCSTMM/BCCSTMM.pdf
2. See whether any back up process is happening and it has consumed the main memory.
3. Are you getting this error regularly
4. See any transport went and compression/aggregation got removed.
5. Check whether there are many dumps in ST22 same time when you execute report
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/4ab89e84-0d01-0010-cda2-82ddc3548c65?QuickLink=index&overridelayout=true
6. http://www.sap-press.de/download/dateien/1049/sappress_bw_performance_optimization_guide_080.pdf
7. Check whether Infoprovifder got removed from BIA
8. Query removed from BIA post transport
9. Run RSRT and regenerate the report.
Thanks and regards
Kiran

Dump while Executing the Report HINUINFU

Dear All
I am getting Dump while executing the T.Code - HRPBSIN_IN_INFU (HINUINFU). As per my Configuration it should update the IT0267 and the IT0582. While debugging the We found out that its updating the IT0267 internally. But while reaching to IT0582 its reflecting on the feature 40CEA and the T549D.
here we are having the Telephone Reimbursement for this i copied the Tax code SEXM to ZTEL and assigned to my wage type
I also maintaied this Subtype to the feature 40CEA.
Checked also the IT0582 and its subtype time constraint.
Still the the DUMP persisisting. Please provide the solutions if any of you come across with the same situation.
Thanks & Regards
Srikanth Reddy

Hi
Issue has been resoved internally. Return value to feature set as HINUOSD0 to MOLGA. hence closing the thread
Regards
Srikanth Reddy

REP-770 Error while executing the report.

Hi,
I am trying to run a report in Application Server 10g. I am executing this report from a form.
When I try to run the report using the 'rdf', I get the error
"Terminated with error: REP-770: There exist uncompiled program unit(s). REP-1247: Report contains uncompiled PL/SQL."
But if I run the report as 'rep' then the report works fine. Now after this if I run the report as 'rdf', it works fine again.
Just to summarise - The problem occurs if I first try to run the report as rdf. But the problem disappears if I run the report as rep first before running it as rdf.
Could someone help me solve this issue.
Thanks
Aruna

Hi Aruna,
I can see 2 bugs logged on Reports 9.0.4.1 (that means 10g patch 1) that report a similar problem:
BUG 4050488 - JSP REPORTS CONTAINING REF CURSOR ASKS FOR COMPILATION EVERYTIME WITH WEB LAOUT
and
BUG 4040844 - REF CURSOR QUERY REP-737 ORA-1247 RUNNING ON LINUX
Another bug reported on 10g has been fixed in upcoming Reports version 10.1.2:
BUG 3324576 - SRW.APPLY_DEFINITION IN PGM UNIT FAILS USING .REP FILE WITH REP-1457 ERROR
They are published bugs. See if you are hitting the same issue. Though I don't think that these bugs reported REP-1247 only the FIRST time you run the report.
Secondly, when I said "compile on the same platform on which you are going to run", I meant this - if you are going to run the report on OracleAS installed on Win 2000, you must compile the report in Reports Builder on Win 2000. Similarly, if you are going to run the report on OracleAS installed on Linux, you must compile the report in Reports Builder on Linux, before running it.
Navneet.

SSRS Error while executing the report

Hi,
dataextension!WindowsService_0!7d4!03/09/2015-11:21:04:: e ERROR: Throwing Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: , Microsoft.ReportingServices.DataExtensions.XmlDP.XmlDPException: Failed to execute web request for the specified
URL.
Internal Server Error: The remote server returned an error: (500) Internal Server Error. ---> System.Exception: The remote server returned an error: (500) Internal Server Error.
i can see the above log in reporting services log files, does anyone having the idea about this?
Thanks
Veera
Thanks
Veera

Hi Veera,
According to your description, when you run the report, you get XMLDPException and 500 error.
In your scenario, I would like to know if you are running report in report server or SharePoint site. Does the error only occur when executing this report? Based on my research, the same issue occurs when using SSRS 2008. And the reason the IIS 7 defaults
to Kernel auth mode. So if that is a case, please disable Kernal Auth mode for IIS and registering the SPN on the APPool account.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Dump while executing the report in the background!!!

Hi Experts,
I have created one report which is calling the "HRASR_TEST_PROCESS" (HR form process) thru BDC.
Its running fine while executing via SE38 (foreground) but getting dump while executing from the background with same variant.
The dump is follows,
Short Text
Exception condition "CNTL_ERROR" raised.
ERROR ANALYSIS
A RAISE statement in the program "CL_GUI_CUSTOM_CONTAINER=======CP" raised the exception condition "CNTL_ERROR". Since the exception was not intercepted by a superior program, processing was terminated.
Line        Source Code
32         WHEN 1.
   33           RAISE CNTL_SYSTEM_ERROR.
   34         WHEN 2.
   35           RAISE CNTL_ERROR.
   36         WHEN 3.
   37           class cl_gui_cfw definition load.
   38           message id 'DC' type 'W' number cl_gui_cfw=>reason_no_init
   39             raising create_error.
   40         WHEN 4.
   41           RAISE LIFETIME_ERROR.
   42         WHEN 5.
   43           RAISE LIFETIME_DYNPRO_DYNPRO_LINK.
   44         WHEN OTHERS.
   45           RAISE CNTL_ERROR.
   46       ENDCASE.
   47
   48       m_container_type = CONTAINER_TYPE_CUSTOM.
   49
   50       CALL METHOD SET_VISIBLE
   51           EXPORTING
   52               VISIBLE = '1'
   53           EXCEPTIONS
   54               CNTL_SYSTEM_ERROR = 1
   55               CNTL_ERROR = 2.
   56
   57       CASE SY-SUBRC.
   58         WHEN 0.
   59         WHEN 1.
   60           RAISE CNTL_SYSTEM_ERROR.
   61         WHEN 2.
>>>>>           RAISE CNTL_ERROR.
   63         WHEN OTHERS.
   64           RAISE CNTL_ERROR.
   65       ENDCASE.
   66
   67       m_name = container_name.
   68       call method set_window_property
   69            exporting property_id = property_name
   70                      value       = m_name
   71                      keep_cache = 'X'
   72            exceptions others = 1.
   73       if sy-subrc ne 0.
   74         clear m_name.
   75         raise cntl_error.
   76       endif.
   77
   78       CALL METHOD ME->REGISTER_CACHED_W_PROPERTY
   79         EXPORTING
   80           PROPERTY_ID             = property_height
   81         EXCEPTIONS
Kindly let me know, what is the problem and how can i solve it.
Thanks in advance.
Regards,
Harish

Hello Zhou,
indeed, as you mention the ALV grid, there are some workarounds in the system, but there is no global solution. For example, the function module REUSE_ALV_GRID_DISPLAY detects internally whether it is called in background mode, and in this case it forwards the call to REUSE_ALV_LIST_DISPLAY which is runnable in background mode, since it creates an ABAP list.
But normally, when using objects of the control framework in your program, you are restricted to dialog mode.
Kind regards,
Rüdiger

Issue while executing the report

Hello experts,
I have an issue related to executing the BI Report. In one report , i get an issue of Time Out, as the report is executed for a single day only with a single restriction. Also i execute the same report in RSRT, there also it gives a short dump. I checked the data into the related component for the same selection parameter values. here I get the data but it is creating issue while executing in RSRT or analyser or EP.
what is happening there am not able to understand. please advice.
Also searched in SDN but not get the relevant thread.
Thanks in advance
Neha

hii
The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
But if query is not restricted with any value for that info object then query executes with in a second.
Thanks
neha

Error while executing the Report( Need your help gurus) !!!

Hi,
Today morning when i was checking the report for monthly data i,e from 1sept to 28th sept.
I got this below error msg. Can you pls guide me why its throwing an error.
Error SQL Error: 1555
Error Error when generating the SQL statement
Error Error reading the data of InfoProvider POS_IS1
Cancel System error in program SAPLRRK0 and form RSRDR;SRRK0F30-01-
Points Assured.
Urs,
RK.

hi,
There is some time limit set for the request to run when you run a program in the foreground or in the background. If the time limit exceeds this will occur, run the program again then this might not happen.
This might be related to table space issue, or roll area or memory. Show the short dump (ST22) to your Basis person and tell me to adjust/increase the respective tablespace .
Regards
Pankaj

Error while executing the report

Hello Frineds..
Need some help once again .
When the user is executing the query , he is getting below error.sometimes.
could please tell me why it is so ?
Warning Result from ZPOS_C10 removed( attempt1) , Reorgenzation during reading.
Abort sys error - RSDRC ERROR in RSDRC_NUMC_BASIC_QUERY_DATA_ZPOS_C10 60
Abort sys error in prog RSDRC_NCUM_ROUTINES and form READ_DELTA_1
Could please tell me why it has happend ..and how can we improve the situation in next time
Thanks in advance
Regards

Hi Akshay,
I guess the error occurs since you made a change to the Data target - possibly removing/replacing a info-object.
Try this sequence:
1. Open the query in change mode and resave it.Now execute it and check.
2. If error still occurs then try executing the query in RSRT and check the error and analyze or post here.
Hope this helps.
Bye
Dinesh

Getting error while executing the report in WEB

Hello Experts,
I have did validation in my report on selection screen, if that validation is successful then only we can see the report output
otherwise it's give the error message.
Validations are working query designer and RSRT but when I run the report in WEB then even if the validation is successful then also I am getting the error message and not able to see the report output.
I have written the code in user exit for validation.
Can any one tell me why it is so?
what needs to do?
Thanks
Chetan

Hi.
Could you plz explain your validation logic and wich way it done ?
Could you plz provide error message ?
Regards.

Ora 24338 error. in pro*c while executing the report at the second time

This is one solved So thanks
S
Edited by: Oracle beginner on Feb 11, 2010 4:07 PM

Hi Akshay,
I guess the error occurs since you made a change to the Data target - possibly removing/replacing a info-object.
Try this sequence:
1. Open the query in change mode and resave it.Now execute it and check.
2. If error still occurs then try executing the query in RSRT and check the error and analyze or post here.
Hope this helps.
Bye
Dinesh

Portal asking for Login details again while executing the reports

Similar Messages

Maybe you are looking for